OHCI: remove existing autosuspend code

The autosuspend technique used by ohci-hcd doesn't mesh well with the
newer USB core autosuspend code.  This patch (as789) removes ohci-hcd's
autosuspend support.  Now the driver will be usable, but it won't
automatically go into a low-power state when no devices are connected.
That's for a later patch.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 0b89933..ef49654 100644 (file)
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -41,6 +41,7 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd)
 {
        struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 
+       hcd->poll_rh = 0;
        ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
 }
 
@@ -117,8 +118,10 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
        /* maybe resume can wake root hub */
        if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev))
                ohci->hc_control |= OHCI_CTRL_RWE;
-       else
+       else {
+               ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
                ohci->hc_control &= ~OHCI_CTRL_RWE;
+       }
 
        /* Suspend hub ... this is the "global (to this bus) suspend" mode,
         * which doesn't imply ports will first be individually suspended.
@@ -310,20 +313,16 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
        int             i, changed = 0, length = 1;
-       int             can_suspend;
        unsigned long   flags;
 
-       can_suspend = device_may_wakeup(&hcd->self.root_hub->dev);
        spin_lock_irqsave (&ohci->lock, flags);
 
        /* handle autosuspended root:  finish resuming before
         * letting khubd or root hub timer see state changes.
         */
        if (unlikely((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER
-                    || !HC_IS_RUNNING(hcd->state))) {
-               can_suspend = 0;
+                    || !HC_IS_RUNNING(hcd->state)))
                goto done;
-       }
 
        /* undocumented erratum seen on at least rev D */
        if ((ohci->flags & OHCI_QUIRK_AMD756)
@@ -348,10 +347,6 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
        for (i = 0; i < ohci->num_ports; i++) {
                u32     status = roothub_portstatus (ohci, i);
 
-               /* can't autosuspend with active ports */
-               if ((status & RH_PS_PES) && !(status & RH_PS_PSS))
-                       can_suspend = 0;
-
                if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
                                | RH_PS_OCIC | RH_PS_PRSC)) {
                        changed = 1;
@@ -366,42 +361,12 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
        /* after root hub changes, stop polling after debouncing
         * for a while and maybe kicking in autosuspend
         */
-       if (changed) {
+       if (changed)
                ohci->next_statechange = jiffies + STATECHANGE_DELAY;
-               can_suspend = 0;
-       } else if (time_before (jiffies, ohci->next_statechange)) {
-               can_suspend = 0;
-       } else {
-#ifdef CONFIG_PM
-               can_suspend = can_suspend
-                       && !ohci->ed_rm_list
-                       && ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES)
-                                       & ohci->hc_control)
-                               == OHCI_USB_OPER;
-#endif
-               if (hcd->uses_new_polling) {
-                       hcd->poll_rh = 0;
-                       /* use INTR_RHSC iff INTR_RD won't apply */
-                       if (!can_suspend)
-                               ohci_writel (ohci, OHCI_INTR_RHSC,
-                                               &ohci->regs->intrenable);
-               }
-       }
 
 done:
        spin_unlock_irqrestore (&ohci->lock, flags);
 
-#ifdef CONFIG_PM
-       /* save power by autosuspending idle root hubs;
-        * INTR_RD wakes us when there's work
-        */
-       if (can_suspend && usb_trylock_device (hcd->self.root_hub) == 0) {
-               ohci_vdbg (ohci, "autosuspend\n");
-               (void) ohci_bus_suspend (hcd);
-               usb_unlock_device (hcd->self.root_hub);
-       }
-#endif
-
        return changed ? length : 0;
 }
 
@@ -572,9 +537,6 @@ static int ohci_hub_control (
                        break;
                case USB_PORT_FEAT_SUSPEND:
                        temp = RH_PS_POCI;
-                       if ((ohci->hc_control & OHCI_CTRL_HCFS)
-                                       != OHCI_USB_OPER)
-                               usb_hcd_resume_root_hub(hcd);
                        break;
                case USB_PORT_FEAT_C_SUSPEND:
                        temp = RH_PS_PSSC;