source "drivers/staging/iio/accel/Kconfig"
source "drivers/staging/iio/adc/Kconfig"
+source "drivers/staging/iio/imu/Kconfig"
source "drivers/staging/iio/light/Kconfig"
source "drivers/staging/iio/trigger/Kconfig"
obj-y += accel/
obj-y += adc/
+obj-y += imu/
obj-y += light/
obj-y += trigger/
\ No newline at end of file
#define IIO_DEV_ATTR_IN_RAW(_num, _show, _addr) \
IIO_DEVICE_ATTR(in##_num##_raw, S_IRUGO, _show, NULL, _addr)
+#define IIO_DEV_ATTR_IN_NAMED_RAW(_name, _show, _addr) \
+ IIO_DEVICE_ATTR(in_##_name##_raw, S_IRUGO, _show, NULL, _addr)
+
#define IIO_DEV_ATTR_IN_DIFF_RAW(_nump, _numn, _show, _addr) \
IIO_DEVICE_ATTR_NAMED(in##_nump##min##_numn##_raw, \
in##_nump-in##_numn##_raw, \
--- /dev/null
+
+#include "../sysfs.h"
+
+/* Gyroscope types of attribute */
+
+#define IIO_DEV_ATTR_GYRO_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO_X_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_x_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO_Y_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_y_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO_Z_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_z_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO_X_GAIN(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_x_gain, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO_Y_GAIN(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_y_gain, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO_Z_GAIN(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_z_gain, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO_SCALE(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(gyro_scale, S_IRUGO, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_GYRO(_show, _addr) \
+ IIO_DEVICE_ATTR(gyro, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_GYRO_X(_show, _addr) \
+ IIO_DEVICE_ATTR(gyro_x, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_GYRO_Y(_show, _addr) \
+ IIO_DEVICE_ATTR(gyro_y, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_GYRO_Z(_show, _addr) \
+ IIO_DEVICE_ATTR(gyro_z, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_TEMP_X(_show, _addr) \
+ IIO_DEVICE_ATTR(temp_x, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_TEMP_Y(_show, _addr) \
+ IIO_DEVICE_ATTR(temp_y, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_TEMP_Z(_show, _addr) \
+ IIO_DEVICE_ATTR(temp_z, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_INCLI_X(_show, _addr) \
+ IIO_DEVICE_ATTR(incli_x, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_INCLI_Y(_show, _addr) \
+ IIO_DEVICE_ATTR(incli_y, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_INCLI_Z(_show, _addr) \
+ IIO_DEVICE_ATTR(incli_z, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_INCLI_X_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(incli_x_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_INCLI_Y_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(incli_y_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_INCLI_Z_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(incli_z_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_ROT(_show, _addr) \
+ IIO_DEVICE_ATTR(rot, S_IRUGO, _show, NULL, _addr)
+
+#define IIO_DEV_ATTR_ROT_OFFSET(_mode, _show, _store, _addr) \
+ IIO_DEVICE_ATTR(rot_offset, _mode, _show, _store, _addr)
+
+#define IIO_DEV_ATTR_ANGL(_show, _addr) \
+ IIO_DEVICE_ATTR(angl, S_IRUGO, _show, NULL, _addr)
--- /dev/null
+#
+# IIO imu drivers configuration
+#
+comment "Inertial measurement units"
+
+config ADIS16300
+ tristate "Analog Devices ADIS16300 IMU SPI driver"
+ depends on SPI
+ select IIO_SW_RING
+ select IIO_RING_BUFFER
+ select IIO_TRIGGER
+ help
+ Say yes here to build support for Analog Devices adis16300 four degrees
+ of freedom inertial sensor.
--- /dev/null
+#
+# Makefile for Inertial Measurement Units
+#
+adis16300-y := adis16300_core.o
+adis16300-$(CONFIG_IIO_RING_BUFFER) += adis16300_ring.o adis16300_trigger.o
+obj-$(CONFIG_ADIS16300) += adis16300.o
--- /dev/null
+#ifndef SPI_ADIS16300_H_
+#define SPI_ADIS16300_H_
+
+#define ADIS16300_STARTUP_DELAY 220 /* ms */
+
+#define ADIS16300_READ_REG(a) a
+#define ADIS16300_WRITE_REG(a) ((a) | 0x80)
+
+#define ADIS16300_FLASH_CNT 0x00 /* Flash memory write count */
+#define ADIS16300_SUPPLY_OUT 0x02 /* Power supply measurement */
+#define ADIS16300_XGYRO_OUT 0x04 /* X-axis gyroscope output */
+#define ADIS16300_XACCL_OUT 0x0A /* X-axis accelerometer output */
+#define ADIS16300_YACCL_OUT 0x0C /* Y-axis accelerometer output */
+#define ADIS16300_ZACCL_OUT 0x0E /* Z-axis accelerometer output */
+#define ADIS16300_TEMP_OUT 0x10 /* Temperature output */
+#define ADIS16300_XINCLI_OUT 0x12 /* X-axis inclinometer output measurement */
+#define ADIS16300_YINCLI_OUT 0x14 /* Y-axis inclinometer output measurement */
+#define ADIS16300_AUX_ADC 0x16 /* Auxiliary ADC measurement */
+
+/* Calibration parameters */
+#define ADIS16300_XGYRO_OFF 0x1A /* X-axis gyroscope bias offset factor */
+#define ADIS16300_XACCL_OFF 0x20 /* X-axis acceleration bias offset factor */
+#define ADIS16300_YACCL_OFF 0x22 /* Y-axis acceleration bias offset factor */
+#define ADIS16300_ZACCL_OFF 0x24 /* Z-axis acceleration bias offset factor */
+
+#define ADIS16300_GPIO_CTRL 0x32 /* Auxiliary digital input/output control */
+#define ADIS16300_MSC_CTRL 0x34 /* Miscellaneous control */
+#define ADIS16300_SMPL_PRD 0x36 /* Internal sample period (rate) control */
+#define ADIS16300_SENS_AVG 0x38 /* Dynamic range and digital filter control */
+#define ADIS16300_SLP_CNT 0x3A /* Sleep mode control */
+#define ADIS16300_DIAG_STAT 0x3C /* System status */
+
+/* Alarm functions */
+#define ADIS16300_GLOB_CMD 0x3E /* System command */
+#define ADIS16300_ALM_MAG1 0x26 /* Alarm 1 amplitude threshold */
+#define ADIS16300_ALM_MAG2 0x28 /* Alarm 2 amplitude threshold */
+#define ADIS16300_ALM_SMPL1 0x2A /* Alarm 1 sample size */
+#define ADIS16300_ALM_SMPL2 0x2C /* Alarm 2 sample size */
+#define ADIS16300_ALM_CTRL 0x2E /* Alarm control */
+#define ADIS16300_AUX_DAC 0x30 /* Auxiliary DAC data */
+
+#define ADIS16300_ERROR_ACTIVE (1<<14)
+#define ADIS16300_NEW_DATA (1<<15)
+
+/* MSC_CTRL */
+#define ADIS16300_MSC_CTRL_MEM_TEST (1<<11)
+#define ADIS16300_MSC_CTRL_INT_SELF_TEST (1<<10)
+#define ADIS16300_MSC_CTRL_NEG_SELF_TEST (1<<9)
+#define ADIS16300_MSC_CTRL_POS_SELF_TEST (1<<8)
+#define ADIS16300_MSC_CTRL_GYRO_BIAS (1<<7)
+#define ADIS16300_MSC_CTRL_ACCL_ALIGN (1<<6)
+#define ADIS16300_MSC_CTRL_DATA_RDY_EN (1<<2)
+#define ADIS16300_MSC_CTRL_DATA_RDY_POL_HIGH (1<<1)
+#define ADIS16300_MSC_CTRL_DATA_RDY_DIO2 (1<<0)
+
+/* SMPL_PRD */
+#define ADIS16300_SMPL_PRD_TIME_BASE (1<<7)
+#define ADIS16300_SMPL_PRD_DIV_MASK 0x7F
+
+/* DIAG_STAT */
+#define ADIS16300_DIAG_STAT_ZACCL_FAIL (1<<15)
+#define ADIS16300_DIAG_STAT_YACCL_FAIL (1<<14)
+#define ADIS16300_DIAG_STAT_XACCL_FAIL (1<<13)
+#define ADIS16300_DIAG_STAT_XGYRO_FAIL (1<<10)
+#define ADIS16300_DIAG_STAT_ALARM2 (1<<9)
+#define ADIS16300_DIAG_STAT_ALARM1 (1<<8)
+#define ADIS16300_DIAG_STAT_FLASH_CHK (1<<6)
+#define ADIS16300_DIAG_STAT_SELF_TEST (1<<5)
+#define ADIS16300_DIAG_STAT_OVERFLOW (1<<4)
+#define ADIS16300_DIAG_STAT_SPI_FAIL (1<<3)
+#define ADIS16300_DIAG_STAT_FLASH_UPT (1<<2)
+#define ADIS16300_DIAG_STAT_POWER_HIGH (1<<1)
+#define ADIS16300_DIAG_STAT_POWER_LOW (1<<0)
+
+/* GLOB_CMD */
+#define ADIS16300_GLOB_CMD_SW_RESET (1<<7)
+#define ADIS16300_GLOB_CMD_P_AUTO_NULL (1<<4)
+#define ADIS16300_GLOB_CMD_FLASH_UPD (1<<3)
+#define ADIS16300_GLOB_CMD_DAC_LATCH (1<<2)
+#define ADIS16300_GLOB_CMD_FAC_CALIB (1<<1)
+#define ADIS16300_GLOB_CMD_AUTO_NULL (1<<0)
+
+/* SLP_CNT */
+#define ADIS16300_SLP_CNT_POWER_OFF (1<<8)
+
+#define ADIS16300_MAX_TX 18
+#define ADIS16300_MAX_RX 18
+
+#define ADIS16300_SPI_SLOW (u32)(300 * 1000)
+#define ADIS16300_SPI_BURST (u32)(1000 * 1000)
+#define ADIS16300_SPI_FAST (u32)(2000 * 1000)
+
+/**
+ * struct adis16300_state - device instance specific data
+ * @us: actual spi_device
+ * @work_trigger_to_ring: bh for triggered event handling
+ * @work_cont_thresh: CLEAN
+ * @inter: used to check if new interrupt has been triggered
+ * @last_timestamp: passing timestamp from th to bh of interrupt handler
+ * @indio_dev: industrial I/O device structure
+ * @trig: data ready trigger registered with iio
+ * @tx: transmit buffer
+ * @rx: recieve buffer
+ * @buf_lock: mutex to protect tx and rx
+ **/
+struct adis16300_state {
+ struct spi_device *us;
+ struct work_struct work_trigger_to_ring;
+ struct iio_work_cont work_cont_thresh;
+ s64 last_timestamp;
+ struct iio_dev *indio_dev;
+ struct iio_trigger *trig;
+ u8 *tx;
+ u8 *rx;
+ struct mutex buf_lock;
+};
+
+int adis16300_spi_write_reg_8(struct device *dev,
+ u8 reg_address,
+ u8 val);
+
+int adis16300_spi_read_burst(struct device *dev, u8 *rx);
+
+int adis16300_spi_read_sequence(struct device *dev,
+ u8 *tx, u8 *rx, int num);
+
+int adis16300_set_irq(struct device *dev, bool enable);
+
+int adis16300_reset(struct device *dev);
+
+int adis16300_stop_device(struct device *dev);
+
+int adis16300_check_status(struct device *dev);
+
+#ifdef CONFIG_IIO_RING_BUFFER
+/* At the moment triggers are only used for ring buffer
+ * filling. This may change!
+ */
+
+enum adis16300_scan {
+ ADIS16300_SCAN_SUPPLY,
+ ADIS16300_SCAN_GYRO_X,
+ ADIS16300_SCAN_ACC_X,
+ ADIS16300_SCAN_ACC_Y,
+ ADIS16300_SCAN_ACC_Z,
+ ADIS16300_SCAN_TEMP,
+ ADIS16300_SCAN_ADC_0,
+ ADIS16300_SCAN_INCLI_X,
+ ADIS16300_SCAN_INCLI_Y,
+};
+
+void adis16300_remove_trigger(struct iio_dev *indio_dev);
+int adis16300_probe_trigger(struct iio_dev *indio_dev);
+
+ssize_t adis16300_read_data_from_ring(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+
+int adis16300_configure_ring(struct iio_dev *indio_dev);
+void adis16300_unconfigure_ring(struct iio_dev *indio_dev);
+
+int adis16300_initialize_ring(struct iio_ring_buffer *ring);
+void adis16300_uninitialize_ring(struct iio_ring_buffer *ring);
+#else /* CONFIG_IIO_RING_BUFFER */
+
+static inline void adis16300_remove_trigger(struct iio_dev *indio_dev)
+{
+}
+
+static inline int adis16300_probe_trigger(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+
+static inline ssize_t
+adis16300_read_data_from_ring(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return 0;
+}
+
+static int adis16300_configure_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+
+static inline void adis16300_unconfigure_ring(struct iio_dev *indio_dev)
+{
+}
+
+static inline int adis16300_initialize_ring(struct iio_ring_buffer *ring)
+{
+ return 0;
+}
+
+static inline void adis16300_uninitialize_ring(struct iio_ring_buffer *ring)
+{
+}
+
+#endif /* CONFIG_IIO_RING_BUFFER */
+#endif /* SPI_ADIS16300_H_ */
--- /dev/null
+/*
+ * ADIS16300 Four Degrees of Freedom Inertial Sensor Driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+
+#include <linux/sysfs.h>
+#include <linux/list.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+#include "../accel/accel.h"
+#include "../gyro/gyro.h"
+#include "../adc/adc.h"
+
+#include "adis16300.h"
+
+#define DRIVER_NAME "adis16300"
+
+/* At the moment the spi framework doesn't allow global setting of cs_change.
+ * It's in the likely to be added comment at the top of spi.h.
+ * This means that use cannot be made of spi_write etc.
+ */
+
+/**
+ * adis16300_spi_write_reg_8() - write single byte to a register
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @reg_address: the address of the register to be written
+ * @val: the value to write
+ **/
+int adis16300_spi_write_reg_8(struct device *dev,
+ u8 reg_address,
+ u8 val)
+{
+ int ret;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+
+ mutex_lock(&st->buf_lock);
+ st->tx[0] = ADIS16300_WRITE_REG(reg_address);
+ st->tx[1] = val;
+
+ ret = spi_write(st->us, st->tx, 2);
+ mutex_unlock(&st->buf_lock);
+
+ return ret;
+}
+
+/**
+ * adis16300_spi_write_reg_16() - write 2 bytes to a pair of registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @reg_address: the address of the lower of the two registers. Second register
+ * is assumed to have address one greater.
+ * @val: value to be written
+ **/
+static int adis16300_spi_write_reg_16(struct device *dev,
+ u8 lower_reg_address,
+ u16 value)
+{
+ int ret;
+ struct spi_message msg;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = st->tx,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ }, {
+ .tx_buf = st->tx + 2,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 1,
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ st->tx[0] = ADIS16300_WRITE_REG(lower_reg_address);
+ st->tx[1] = value & 0xFF;
+ st->tx[2] = ADIS16300_WRITE_REG(lower_reg_address + 1);
+ st->tx[3] = (value >> 8) & 0xFF;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ ret = spi_sync(st->us, &msg);
+ mutex_unlock(&st->buf_lock);
+
+ return ret;
+}
+
+/**
+ * adis16300_spi_read_reg_16() - read 2 bytes from a 16-bit register
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @reg_address: the address of the lower of the two registers. Second register
+ * is assumed to have address one greater.
+ * @val: somewhere to pass back the value read
+ **/
+static int adis16300_spi_read_reg_16(struct device *dev,
+ u8 lower_reg_address,
+ u16 *val)
+{
+ struct spi_message msg;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+ int ret;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = st->tx,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 0,
+ }, {
+ .rx_buf = st->rx,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 0,
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ st->tx[0] = ADIS16300_READ_REG(lower_reg_address);
+ st->tx[1] = 0;
+ st->tx[2] = 0;
+ st->tx[3] = 0;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ ret = spi_sync(st->us, &msg);
+ if (ret) {
+ dev_err(&st->us->dev,
+ "problem when reading 16 bit register 0x%02X",
+ lower_reg_address);
+ goto error_ret;
+ }
+ *val = (st->rx[0] << 8) | st->rx[1];
+
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adis16300_spi_read_burst() - read all data registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @rx: somewhere to pass back the value read (min size is 24 bytes)
+ **/
+int adis16300_spi_read_burst(struct device *dev, u8 *rx)
+{
+ struct spi_message msg;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+ u32 old_speed_hz = st->us->max_speed_hz;
+ int ret;
+
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = st->tx,
+ .bits_per_word = 8,
+ .len = 2,
+ .cs_change = 0,
+ }, {
+ .rx_buf = rx,
+ .bits_per_word = 8,
+ .len = 18,
+ .cs_change = 0,
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ st->tx[0] = ADIS16300_READ_REG(ADIS16300_GLOB_CMD);
+ st->tx[1] = 0;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+
+ st->us->max_speed_hz = min(ADIS16300_SPI_BURST, old_speed_hz);
+ spi_setup(st->us);
+
+ ret = spi_sync(st->us, &msg);
+ if (ret)
+ dev_err(&st->us->dev, "problem when burst reading");
+
+ st->us->max_speed_hz = old_speed_hz;
+ spi_setup(st->us);
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adis16300_spi_read_sequence() - read a sequence of 16-bit registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @tx: register addresses in bytes 0,2,4,6... (min size is 2*num bytes)
+ * @rx: somewhere to pass back the value read (min size is 2*num bytes)
+ **/
+int adis16300_spi_read_sequence(struct device *dev,
+ u8 *tx, u8 *rx, int num)
+{
+ struct spi_message msg;
+ struct spi_transfer *xfers;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+ int ret, i;
+
+ xfers = kzalloc(num + 1, GFP_KERNEL);
+ if (xfers == NULL) {
+ dev_err(&st->us->dev, "memory alloc failed");
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+
+ /* tx: |add1|addr2|addr3|...|addrN |zero|
+ * rx: |zero|res1 |res2 |...|resN-1|resN| */
+ spi_message_init(&msg);
+ for (i = 0; i < num + 1; i++) {
+ if (i > 0)
+ xfers[i].rx_buf = st->rx + 2*(i - 1);
+ if (i < num)
+ xfers[i].tx_buf = st->tx + 2*i;
+ xfers[i].bits_per_word = 8;
+ xfers[i].len = 2;
+ xfers[i].cs_change = 1;
+ spi_message_add_tail(&xfers[i], &msg);
+ }
+
+ mutex_lock(&st->buf_lock);
+
+ ret = spi_sync(st->us, &msg);
+ if (ret)
+ dev_err(&st->us->dev, "problem when reading sequence");
+
+ mutex_unlock(&st->buf_lock);
+ kfree(xfers);
+
+error_ret:
+ return ret;
+}
+
+static ssize_t adis16300_spi_read_signed(struct device *dev,
+ struct device_attribute *attr,
+ char *buf,
+ unsigned bits)
+{
+ int ret;
+ s16 val = 0;
+ unsigned shift = 16 - bits;
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+ ret = adis16300_spi_read_reg_16(dev, this_attr->address, (u16 *)&val);
+ if (ret)
+ return ret;
+
+ if (val & ADIS16300_ERROR_ACTIVE)
+ adis16300_check_status(dev);
+ val = ((s16)(val << shift) >> shift);
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t adis16300_read_12bit_unsigned(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u16 val = 0;
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+ ret = adis16300_spi_read_reg_16(dev, this_attr->address, &val);
+ if (ret)
+ return ret;
+
+ if (val & ADIS16300_ERROR_ACTIVE)
+ adis16300_check_status(dev);
+
+ return sprintf(buf, "%u\n", val & 0x0FFF);
+}
+
+static ssize_t adis16300_read_14bit_signed(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ /* Take the iio_dev status lock */
+ mutex_lock(&indio_dev->mlock);
+ ret = adis16300_spi_read_signed(dev, attr, buf, 14);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static ssize_t adis16300_read_12bit_signed(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ /* Take the iio_dev status lock */
+ mutex_lock(&indio_dev->mlock);
+ ret = adis16300_spi_read_signed(dev, attr, buf, 12);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static ssize_t adis16300_read_13bit_signed(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ /* Take the iio_dev status lock */
+ mutex_lock(&indio_dev->mlock);
+ ret = adis16300_spi_read_signed(dev, attr, buf, 13);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static ssize_t adis16300_write_16bit(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ int ret;
+ long val;
+
+ ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ goto error_ret;
+ ret = adis16300_spi_write_reg_16(dev, this_attr->address, val);
+
+error_ret:
+ return ret ? ret : len;
+}
+
+static ssize_t adis16300_read_frequency(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret, len = 0;
+ u16 t;
+ int sps;
+ ret = adis16300_spi_read_reg_16(dev,
+ ADIS16300_SMPL_PRD,
+ &t);
+ if (ret)
+ return ret;
+ sps = (t & ADIS16300_SMPL_PRD_TIME_BASE) ? 53 : 1638;
+ sps /= (t & ADIS16300_SMPL_PRD_DIV_MASK) + 1;
+ len = sprintf(buf, "%d SPS\n", sps);
+ return len;
+}
+
+static ssize_t adis16300_write_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+ long val;
+ int ret;
+ u8 t;
+
+ ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&indio_dev->mlock);
+
+ t = (1638 / val);
+ if (t > 0)
+ t--;
+ t &= ADIS16300_SMPL_PRD_DIV_MASK;
+ if ((t & ADIS16300_SMPL_PRD_DIV_MASK) >= 0x0A)
+ st->us->max_speed_hz = ADIS16300_SPI_SLOW;
+ else
+ st->us->max_speed_hz = ADIS16300_SPI_FAST;
+
+ ret = adis16300_spi_write_reg_8(dev,
+ ADIS16300_SMPL_PRD,
+ t);
+
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret ? ret : len;
+}
+
+static ssize_t adis16300_write_reset(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ if (len < 1)
+ return -1;
+ switch (buf[0]) {
+ case '1':
+ case 'y':
+ case 'Y':
+ return adis16300_reset(dev);
+ }
+ return -1;
+}
+
+
+
+int adis16300_set_irq(struct device *dev, bool enable)
+{
+ int ret;
+ u16 msc;
+ ret = adis16300_spi_read_reg_16(dev, ADIS16300_MSC_CTRL, &msc);
+ if (ret)
+ goto error_ret;
+
+ msc |= ADIS16300_MSC_CTRL_DATA_RDY_POL_HIGH;
+ msc &= ~ADIS16300_MSC_CTRL_DATA_RDY_DIO2;
+ if (enable)
+ msc |= ADIS16300_MSC_CTRL_DATA_RDY_EN;
+ else
+ msc &= ~ADIS16300_MSC_CTRL_DATA_RDY_EN;
+
+ ret = adis16300_spi_write_reg_16(dev, ADIS16300_MSC_CTRL, msc);
+ if (ret)
+ goto error_ret;
+
+error_ret:
+ return ret;
+}
+
+int adis16300_reset(struct device *dev)
+{
+ int ret;
+ ret = adis16300_spi_write_reg_8(dev,
+ ADIS16300_GLOB_CMD,
+ ADIS16300_GLOB_CMD_SW_RESET);
+ if (ret)
+ dev_err(dev, "problem resetting device");
+
+ return ret;
+}
+
+/* Power down the device */
+int adis16300_stop_device(struct device *dev)
+{
+ int ret;
+ u16 val = ADIS16300_SLP_CNT_POWER_OFF;
+
+ ret = adis16300_spi_write_reg_16(dev, ADIS16300_SLP_CNT, val);
+ if (ret)
+ dev_err(dev, "problem with turning device off: SLP_CNT");
+
+ return ret;
+}
+
+int adis16300_self_test(struct device *dev)
+{
+ int ret;
+ ret = adis16300_spi_write_reg_16(dev,
+ ADIS16300_MSC_CTRL,
+ ADIS16300_MSC_CTRL_MEM_TEST);
+ if (ret) {
+ dev_err(dev, "problem starting self test");
+ goto err_ret;
+ }
+
+ adis16300_check_status(dev);
+
+err_ret:
+ return ret;
+}
+
+int adis16300_check_status(struct device *dev)
+{
+ u16 status;
+ int ret;
+
+ ret = adis16300_spi_read_reg_16(dev, ADIS16300_DIAG_STAT, &status);
+
+ if (ret < 0) {
+ dev_err(dev, "Reading status failed\n");
+ goto error_ret;
+ }
+ ret = status;
+ if (status & ADIS16300_DIAG_STAT_ZACCL_FAIL)
+ dev_err(dev, "Z-axis accelerometer self-test failure\n");
+ if (status & ADIS16300_DIAG_STAT_YACCL_FAIL)
+ dev_err(dev, "Y-axis accelerometer self-test failure\n");
+ if (status & ADIS16300_DIAG_STAT_XACCL_FAIL)
+ dev_err(dev, "X-axis accelerometer self-test failure\n");
+ if (status & ADIS16300_DIAG_STAT_XGYRO_FAIL)
+ dev_err(dev, "X-axis gyroscope self-test failure\n");
+ if (status & ADIS16300_DIAG_STAT_ALARM2)
+ dev_err(dev, "Alarm 2 active\n");
+ if (status & ADIS16300_DIAG_STAT_ALARM1)
+ dev_err(dev, "Alarm 1 active\n");
+ if (status & ADIS16300_DIAG_STAT_FLASH_CHK)
+ dev_err(dev, "Flash checksum error\n");
+ if (status & ADIS16300_DIAG_STAT_SELF_TEST)
+ dev_err(dev, "Self test error\n");
+ if (status & ADIS16300_DIAG_STAT_OVERFLOW)
+ dev_err(dev, "Sensor overrange\n");
+ if (status & ADIS16300_DIAG_STAT_SPI_FAIL)
+ dev_err(dev, "SPI failure\n");
+ if (status & ADIS16300_DIAG_STAT_FLASH_UPT)
+ dev_err(dev, "Flash update failed\n");
+ if (status & ADIS16300_DIAG_STAT_POWER_HIGH)
+ dev_err(dev, "Power supply above 5.25V\n");
+ if (status & ADIS16300_DIAG_STAT_POWER_LOW)
+ dev_err(dev, "Power supply below 4.75V\n");
+
+error_ret:
+ return ret;
+}
+
+static int adis16300_initial_setup(struct adis16300_state *st)
+{
+ int ret;
+ u16 smp_prd;
+ struct device *dev = &st->indio_dev->dev;
+
+ /* use low spi speed for init */
+ st->us->max_speed_hz = ADIS16300_SPI_SLOW;
+ st->us->mode = SPI_MODE_3;
+ spi_setup(st->us);
+
+ /* Disable IRQ */
+ ret = adis16300_set_irq(dev, false);
+ if (ret) {
+ dev_err(dev, "disable irq failed");
+ goto err_ret;
+ }
+
+ /* Do self test */
+
+ /* Read status register to check the result */
+ ret = adis16300_check_status(dev);
+ if (ret) {
+ adis16300_reset(dev);
+ dev_err(dev, "device not playing ball -> reset");
+ msleep(ADIS16300_STARTUP_DELAY);
+ ret = adis16300_check_status(dev);
+ if (ret) {
+ dev_err(dev, "giving up");
+ goto err_ret;
+ }
+ }
+
+ printk(KERN_INFO DRIVER_NAME ": at CS%d (irq %d)\n",
+ st->us->chip_select, st->us->irq);
+
+ /* use high spi speed if possible */
+ ret = adis16300_spi_read_reg_16(dev, ADIS16300_SMPL_PRD, &smp_prd);
+ if (!ret && (smp_prd & ADIS16300_SMPL_PRD_DIV_MASK) < 0x0A) {
+ st->us->max_speed_hz = ADIS16300_SPI_SLOW;
+ spi_setup(st->us);
+ }
+
+err_ret:
+ return ret;
+}
+
+static IIO_DEV_ATTR_ACCEL_X_OFFSET(S_IWUSR | S_IRUGO,
+ adis16300_read_12bit_signed,
+ adis16300_write_16bit,
+ ADIS16300_XACCL_OFF);
+
+static IIO_DEV_ATTR_ACCEL_Y_OFFSET(S_IWUSR | S_IRUGO,
+ adis16300_read_12bit_signed,
+ adis16300_write_16bit,
+ ADIS16300_YACCL_OFF);
+
+static IIO_DEV_ATTR_ACCEL_Z_OFFSET(S_IWUSR | S_IRUGO,
+ adis16300_read_12bit_signed,
+ adis16300_write_16bit,
+ ADIS16300_ZACCL_OFF);
+
+static IIO_DEV_ATTR_IN_NAMED_RAW(supply, adis16300_read_14bit_signed,
+ ADIS16300_SUPPLY_OUT);
+static IIO_CONST_ATTR(in_supply_scale, "0.00242");
+
+static IIO_DEV_ATTR_GYRO_X(adis16300_read_14bit_signed,
+ ADIS16300_XGYRO_OUT);
+static IIO_CONST_ATTR(gyro_scale, "0.05 deg/s");
+
+static IIO_DEV_ATTR_ACCEL_X(adis16300_read_14bit_signed,
+ ADIS16300_XACCL_OUT);
+static IIO_DEV_ATTR_ACCEL_Y(adis16300_read_14bit_signed,
+ ADIS16300_YACCL_OUT);
+static IIO_DEV_ATTR_ACCEL_Z(adis16300_read_14bit_signed,
+ ADIS16300_ZACCL_OUT);
+static IIO_CONST_ATTR(accel_scale, "0.0006 g");
+
+static IIO_DEV_ATTR_INCLI_X(adis16300_read_13bit_signed,
+ ADIS16300_XINCLI_OUT);
+static IIO_DEV_ATTR_INCLI_Y(adis16300_read_13bit_signed,
+ ADIS16300_YINCLI_OUT);
+static IIO_CONST_ATTR(incli_scale, "0.044 d");
+
+static IIO_DEV_ATTR_TEMP(adis16300_read_12bit_signed);
+static IIO_CONST_ATTR(temp_offset, "198.16 K");
+static IIO_CONST_ATTR(temp_scale, "0.14 K");
+
+static IIO_DEV_ATTR_IN_RAW(0, adis16300_read_12bit_unsigned,
+ ADIS16300_AUX_ADC);
+static IIO_CONST_ATTR(in0_scale, "0.000806");
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ adis16300_read_frequency,
+ adis16300_write_frequency);
+
+static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, adis16300_write_reset, 0);
+
+static IIO_CONST_ATTR_AVAIL_SAMP_FREQ("409 546 819 1638");
+
+static IIO_CONST_ATTR(name, "adis16300");
+
+static struct attribute *adis16300_event_attributes[] = {
+ NULL
+};
+
+static struct attribute_group adis16300_event_attribute_group = {
+ .attrs = adis16300_event_attributes,
+};
+
+static struct attribute *adis16300_attributes[] = {
+ &iio_dev_attr_accel_x_offset.dev_attr.attr,
+ &iio_dev_attr_accel_y_offset.dev_attr.attr,
+ &iio_dev_attr_accel_z_offset.dev_attr.attr,
+ &iio_dev_attr_in_supply_raw.dev_attr.attr,
+ &iio_const_attr_in_supply_scale.dev_attr.attr,
+ &iio_dev_attr_gyro_x.dev_attr.attr,
+ &iio_const_attr_gyro_scale.dev_attr.attr,
+ &iio_dev_attr_accel_x_raw.dev_attr.attr,
+ &iio_dev_attr_accel_y_raw.dev_attr.attr,
+ &iio_dev_attr_accel_z_raw.dev_attr.attr,
+ &iio_const_attr_accel_scale.dev_attr.attr,
+ &iio_dev_attr_incli_x.dev_attr.attr,
+ &iio_dev_attr_incli_y.dev_attr.attr,
+ &iio_const_attr_incli_scale.dev_attr.attr,
+ &iio_dev_attr_temp.dev_attr.attr,
+ &iio_const_attr_temp_offset.dev_attr.attr,
+ &iio_const_attr_temp_scale.dev_attr.attr,
+ &iio_dev_attr_in0_raw.dev_attr.attr,
+ &iio_const_attr_in0_scale.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_available_sampling_frequency.dev_attr.attr,
+ &iio_dev_attr_reset.dev_attr.attr,
+ &iio_const_attr_name.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group adis16300_attribute_group = {
+ .attrs = adis16300_attributes,
+};
+
+static int __devinit adis16300_probe(struct spi_device *spi)
+{
+ int ret, regdone = 0;
+ struct adis16300_state *st = kzalloc(sizeof *st, GFP_KERNEL);
+ if (!st) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ /* this is only used for removal purposes */
+ spi_set_drvdata(spi, st);
+
+ /* Allocate the comms buffers */
+ st->rx = kzalloc(sizeof(*st->rx)*ADIS16300_MAX_RX, GFP_KERNEL);
+ if (st->rx == NULL) {
+ ret = -ENOMEM;
+ goto error_free_st;
+ }
+ st->tx = kzalloc(sizeof(*st->tx)*ADIS16300_MAX_TX, GFP_KERNEL);
+ if (st->tx == NULL) {
+ ret = -ENOMEM;
+ goto error_free_rx;
+ }
+ st->us = spi;
+ mutex_init(&st->buf_lock);
+ /* setup the industrialio driver allocated elements */
+ st->indio_dev = iio_allocate_device();
+ if (st->indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_free_tx;
+ }
+
+ st->indio_dev->dev.parent = &spi->dev;
+ st->indio_dev->num_interrupt_lines = 1;
+ st->indio_dev->event_attrs = &adis16300_event_attribute_group;
+ st->indio_dev->attrs = &adis16300_attribute_group;
+ st->indio_dev->dev_data = (void *)(st);
+ st->indio_dev->driver_module = THIS_MODULE;
+ st->indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = adis16300_configure_ring(st->indio_dev);
+ if (ret)
+ goto error_free_dev;
+
+ ret = iio_device_register(st->indio_dev);
+ if (ret)
+ goto error_unreg_ring_funcs;
+ regdone = 1;
+
+ ret = adis16300_initialize_ring(st->indio_dev->ring);
+ if (ret) {
+ printk(KERN_ERR "failed to initialize the ring\n");
+ goto error_unreg_ring_funcs;
+ }
+
+ if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
+#if 0 /* fixme: here we should support */
+ iio_init_work_cont(&st->work_cont_thresh,
+ NULL,
+ adis16300_thresh_handler_bh_no_check,
+ 0,
+ 0,
+ st);
+#endif
+ ret = iio_register_interrupt_line(spi->irq,
+ st->indio_dev,
+ 0,
+ IRQF_TRIGGER_RISING,
+ "adis16300");
+ if (ret)
+ goto error_uninitialize_ring;
+
+ ret = adis16300_probe_trigger(st->indio_dev);
+ if (ret)
+ goto error_unregister_line;
+ }
+
+ /* Get the device into a sane initial state */
+ ret = adis16300_initial_setup(st);
+ if (ret)
+ goto error_remove_trigger;
+ return 0;
+
+error_remove_trigger:
+ if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+ adis16300_remove_trigger(st->indio_dev);
+error_unregister_line:
+ if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+ iio_unregister_interrupt_line(st->indio_dev, 0);
+error_uninitialize_ring:
+ adis16300_uninitialize_ring(st->indio_dev->ring);
+error_unreg_ring_funcs:
+ adis16300_unconfigure_ring(st->indio_dev);
+error_free_dev:
+ if (regdone)
+ iio_device_unregister(st->indio_dev);
+ else
+ iio_free_device(st->indio_dev);
+error_free_tx:
+ kfree(st->tx);
+error_free_rx:
+ kfree(st->rx);
+error_free_st:
+ kfree(st);
+error_ret:
+ return ret;
+}
+
+/* fixme, confirm ordering in this function */
+static int adis16300_remove(struct spi_device *spi)
+{
+ int ret;
+ struct adis16300_state *st = spi_get_drvdata(spi);
+ struct iio_dev *indio_dev = st->indio_dev;
+
+ ret = adis16300_stop_device(&(indio_dev->dev));
+ if (ret)
+ goto err_ret;
+
+ flush_scheduled_work();
+
+ adis16300_remove_trigger(indio_dev);
+ if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
+ iio_unregister_interrupt_line(indio_dev, 0);
+
+ adis16300_uninitialize_ring(indio_dev->ring);
+ adis16300_unconfigure_ring(indio_dev);
+ iio_device_unregister(indio_dev);
+ kfree(st->tx);
+ kfree(st->rx);
+ kfree(st);
+
+ return 0;
+
+err_ret:
+ return ret;
+}
+
+static struct spi_driver adis16300_driver = {
+ .driver = {
+ .name = "adis16300",
+ .owner = THIS_MODULE,
+ },
+ .probe = adis16300_probe,
+ .remove = __devexit_p(adis16300_remove),
+};
+
+static __init int adis16300_init(void)
+{
+ return spi_register_driver(&adis16300_driver);
+}
+module_init(adis16300_init);
+
+static __exit void adis16300_exit(void)
+{
+ spi_unregister_driver(&adis16300_driver);
+}
+module_exit(adis16300_exit);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16300 IMU SPI driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+#include "../ring_sw.h"
+#include "../accel/accel.h"
+#include "../trigger.h"
+#include "adis16300.h"
+
+/**
+ * combine_8_to_16() utility function to munge to u8s into u16
+ **/
+static inline u16 combine_8_to_16(u8 lower, u8 upper)
+{
+ u16 _lower = lower;
+ u16 _upper = upper;
+ return _lower | (_upper << 8);
+}
+
+static IIO_SCAN_EL_C(supply, ADIS16300_SCAN_SUPPLY, IIO_SIGNED(14),
+ ADIS16300_SUPPLY_OUT, NULL);
+
+static IIO_SCAN_EL_C(gyro_x, ADIS16300_SCAN_GYRO_X, IIO_SIGNED(14),
+ ADIS16300_XGYRO_OUT, NULL);
+
+static IIO_SCAN_EL_C(accel_x, ADIS16300_SCAN_ACC_X, IIO_SIGNED(14),
+ ADIS16300_XACCL_OUT, NULL);
+static IIO_SCAN_EL_C(accel_y, ADIS16300_SCAN_ACC_Y, IIO_SIGNED(14),
+ ADIS16300_YACCL_OUT, NULL);
+static IIO_SCAN_EL_C(accel_z, ADIS16300_SCAN_ACC_Z, IIO_SIGNED(14),
+ ADIS16300_ZACCL_OUT, NULL);
+
+static IIO_SCAN_EL_C(temp, ADIS16300_SCAN_TEMP, IIO_SIGNED(12),
+ ADIS16300_TEMP_OUT, NULL);
+static IIO_SCAN_EL_C(adc_0, ADIS16300_SCAN_ADC_0, IIO_SIGNED(12),
+ ADIS16300_AUX_ADC, NULL);
+
+static IIO_SCAN_EL_C(incli_x, ADIS16300_SCAN_INCLI_X, IIO_SIGNED(12),
+ ADIS16300_XINCLI_OUT, NULL);
+static IIO_SCAN_EL_C(incli_y, ADIS16300_SCAN_INCLI_Y, IIO_SIGNED(12),
+ ADIS16300_YINCLI_OUT, NULL);
+
+static IIO_SCAN_EL_TIMESTAMP(9);
+
+static struct attribute *adis16300_scan_el_attrs[] = {
+ &iio_scan_el_supply.dev_attr.attr,
+ &iio_scan_el_gyro_x.dev_attr.attr,
+ &iio_scan_el_temp.dev_attr.attr,
+ &iio_scan_el_accel_x.dev_attr.attr,
+ &iio_scan_el_accel_y.dev_attr.attr,
+ &iio_scan_el_accel_z.dev_attr.attr,
+ &iio_scan_el_incli_x.dev_attr.attr,
+ &iio_scan_el_incli_y.dev_attr.attr,
+ &iio_scan_el_adc_0.dev_attr.attr,
+ &iio_scan_el_timestamp.dev_attr.attr,
+ NULL,
+};
+
+static struct attribute_group adis16300_scan_el_group = {
+ .attrs = adis16300_scan_el_attrs,
+ .name = "scan_elements",
+};
+
+/**
+ * adis16300_poll_func_th() top half interrupt handler called by trigger
+ * @private_data: iio_dev
+ **/
+static void adis16300_poll_func_th(struct iio_dev *indio_dev)
+{
+ struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+ st->last_timestamp = indio_dev->trig->timestamp;
+ schedule_work(&st->work_trigger_to_ring);
+ /* Indicate that this interrupt is being handled */
+
+ /* Technically this is trigger related, but without this
+ * handler running there is currently no way for the interrupt
+ * to clear.
+ */
+}
+
+/* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
+ * specific to be rolled into the core.
+ */
+static void adis16300_trigger_bh_to_ring(struct work_struct *work_s)
+{
+ struct adis16300_state *st
+ = container_of(work_s, struct adis16300_state,
+ work_trigger_to_ring);
+
+ int i = 0;
+ s16 *data;
+ size_t datasize = st->indio_dev
+ ->ring->access.get_bpd(st->indio_dev->ring);
+
+ data = kmalloc(datasize , GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(&st->us->dev, "memory alloc failed in ring bh");
+ return;
+ }
+
+ if (st->indio_dev->scan_count)
+ if (adis16300_spi_read_burst(&st->indio_dev->dev, st->rx) >= 0)
+ for (; i < st->indio_dev->scan_count; i++) {
+ data[i] = combine_8_to_16(st->rx[i*2+1],
+ st->rx[i*2]);
+ }
+
+ /* Guaranteed to be aligned with 8 byte boundary */
+ if (st->indio_dev->scan_timestamp)
+ *((s64 *)(data + ((i + 3)/4)*4)) = st->last_timestamp;
+
+ st->indio_dev->ring->access.store_to(st->indio_dev->ring,
+ (u8 *)data,
+ st->last_timestamp);
+
+ iio_trigger_notify_done(st->indio_dev->trig);
+ kfree(data);
+
+ return;
+}
+/* in these circumstances is it better to go with unaligned packing and
+ * deal with the cost?*/
+static int adis16300_data_rdy_ring_preenable(struct iio_dev *indio_dev)
+{
+ size_t size;
+ dev_dbg(&indio_dev->dev, "%s\n", __func__);
+ /* Check if there are any scan elements enabled, if not fail*/
+ if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
+ return -EINVAL;
+
+ if (indio_dev->ring->access.set_bpd) {
+ if (indio_dev->scan_timestamp)
+ if (indio_dev->scan_count) /* Timestamp and data */
+ size = 4*sizeof(s64);
+ else /* Timestamp only */
+ size = sizeof(s64);
+ else /* Data only */
+ size = indio_dev->scan_count*sizeof(s16);
+ indio_dev->ring->access.set_bpd(indio_dev->ring, size);
+ }
+
+ return 0;
+}
+
+static int adis16300_data_rdy_ring_postenable(struct iio_dev *indio_dev)
+{
+ return indio_dev->trig
+ ? iio_trigger_attach_poll_func(indio_dev->trig,
+ indio_dev->pollfunc)
+ : 0;
+}
+
+static int adis16300_data_rdy_ring_predisable(struct iio_dev *indio_dev)
+{
+ return indio_dev->trig
+ ? iio_trigger_dettach_poll_func(indio_dev->trig,
+ indio_dev->pollfunc)
+ : 0;
+}
+
+void adis16300_unconfigure_ring(struct iio_dev *indio_dev)
+{
+ kfree(indio_dev->pollfunc);
+ iio_sw_rb_free(indio_dev->ring);
+}
+
+int adis16300_configure_ring(struct iio_dev *indio_dev)
+{
+ int ret = 0;
+ struct adis16300_state *st = indio_dev->dev_data;
+ struct iio_ring_buffer *ring;
+ INIT_WORK(&st->work_trigger_to_ring, adis16300_trigger_bh_to_ring);
+ /* Set default scan mode */
+
+ iio_scan_mask_set(indio_dev, iio_scan_el_supply.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_gyro_x.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_accel_x.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_accel_y.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_accel_z.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_temp.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_adc_0.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_incli_x.number);
+ iio_scan_mask_set(indio_dev, iio_scan_el_incli_y.number);
+ indio_dev->scan_timestamp = true;
+
+ indio_dev->scan_el_attrs = &adis16300_scan_el_group;
+
+ ring = iio_sw_rb_allocate(indio_dev);
+ if (!ring) {
+ ret = -ENOMEM;
+ return ret;
+ }
+ indio_dev->ring = ring;
+ /* Effectively select the ring buffer implementation */
+ iio_ring_sw_register_funcs(&ring->access);
+ ring->preenable = &adis16300_data_rdy_ring_preenable;
+ ring->postenable = &adis16300_data_rdy_ring_postenable;
+ ring->predisable = &adis16300_data_rdy_ring_predisable;
+ ring->owner = THIS_MODULE;
+
+ indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
+ if (indio_dev->pollfunc == NULL) {
+ ret = -ENOMEM;
+ goto error_iio_sw_rb_free;;
+ }
+ indio_dev->pollfunc->poll_func_main = &adis16300_poll_func_th;
+ indio_dev->pollfunc->private_data = indio_dev;
+ indio_dev->modes |= INDIO_RING_TRIGGERED;
+ return 0;
+
+error_iio_sw_rb_free:
+ iio_sw_rb_free(indio_dev->ring);
+ return ret;
+}
+
+int adis16300_initialize_ring(struct iio_ring_buffer *ring)
+{
+ return iio_ring_buffer_register(ring, 0);
+}
+
+void adis16300_uninitialize_ring(struct iio_ring_buffer *ring)
+{
+ iio_ring_buffer_unregister(ring);
+}
--- /dev/null
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/spi/spi.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+#include "../trigger.h"
+#include "adis16300.h"
+
+/**
+ * adis16300_data_rdy_trig_poll() the event handler for the data rdy trig
+ **/
+static int adis16300_data_rdy_trig_poll(struct iio_dev *dev_info,
+ int index,
+ s64 timestamp,
+ int no_test)
+{
+ struct adis16300_state *st = iio_dev_get_devdata(dev_info);
+ struct iio_trigger *trig = st->trig;
+
+ trig->timestamp = timestamp;
+ iio_trigger_poll(trig);
+
+ return IRQ_HANDLED;
+}
+
+IIO_EVENT_SH(data_rdy_trig, &adis16300_data_rdy_trig_poll);
+
+static DEVICE_ATTR(name, S_IRUGO, iio_trigger_read_name, NULL);
+
+static struct attribute *adis16300_trigger_attrs[] = {
+ &dev_attr_name.attr,
+ NULL,
+};
+
+static const struct attribute_group adis16300_trigger_attr_group = {
+ .attrs = adis16300_trigger_attrs,
+};
+
+/**
+ * adis16300_data_rdy_trigger_set_state() set datardy interrupt state
+ **/
+static int adis16300_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct adis16300_state *st = trig->private_data;
+ struct iio_dev *indio_dev = st->indio_dev;
+ int ret = 0;
+
+ dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state);
+ ret = adis16300_set_irq(&st->indio_dev->dev, state);
+ if (state == false) {
+ iio_remove_event_from_list(&iio_event_data_rdy_trig,
+ &indio_dev->interrupts[0]
+ ->ev_list);
+ /* possible quirk with handler currently worked around
+ by ensuring the work queue is empty */
+ flush_scheduled_work();
+ } else {
+ iio_add_event_to_list(&iio_event_data_rdy_trig,
+ &indio_dev->interrupts[0]->ev_list);
+ }
+ return ret;
+}
+
+/**
+ * adis16300_trig_try_reen() try renabling irq for data rdy trigger
+ * @trig: the datardy trigger
+ **/
+static int adis16300_trig_try_reen(struct iio_trigger *trig)
+{
+ struct adis16300_state *st = trig->private_data;
+ enable_irq(st->us->irq);
+ /* irq reenabled so success! */
+ return 0;
+}
+
+int adis16300_probe_trigger(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct adis16300_state *st = indio_dev->dev_data;
+
+ st->trig = iio_allocate_trigger();
+ st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+ if (!st->trig->name) {
+ ret = -ENOMEM;
+ goto error_free_trig;
+ }
+ snprintf((char *)st->trig->name,
+ IIO_TRIGGER_NAME_LENGTH,
+ "adis16300-dev%d", indio_dev->id);
+ st->trig->dev.parent = &st->us->dev;
+ st->trig->owner = THIS_MODULE;
+ st->trig->private_data = st;
+ st->trig->set_trigger_state = &adis16300_data_rdy_trigger_set_state;
+ st->trig->try_reenable = &adis16300_trig_try_reen;
+ st->trig->control_attrs = &adis16300_trigger_attr_group;
+ ret = iio_trigger_register(st->trig);
+
+ /* select default trigger */
+ indio_dev->trig = st->trig;
+ if (ret)
+ goto error_free_trig_name;
+
+ return 0;
+
+error_free_trig_name:
+ kfree(st->trig->name);
+error_free_trig:
+ iio_free_trigger(st->trig);
+
+ return ret;
+}
+
+void adis16300_remove_trigger(struct iio_dev *indio_dev)
+{
+ struct adis16300_state *state = indio_dev->dev_data;
+
+ iio_trigger_unregister(state->trig);
+ kfree(state->trig->name);
+ iio_free_trigger(state->trig);
+}
git.openpandora.org / pandora-kernel.git / commitdiff