6.2 Native absolute mode 6 byte packet format
6.2.1 One/Three finger touch
6.2.2 Two finger touch
+ 7. Hardware version 4
+ 7.1 Registers
+ 7.2 Native absolute mode 6 byte packet format
+ 7.2.1 Status packet
+ 7.2.2 Head packet
+ 7.2.3 Motion packet
sends two 6 byte packets. The first packet contains data for the first finger,
the second packet has data for the second finger. So for two finger touch a
total of 12 bytes are sent.
+
+/////////////////////////////////////////////////////////////////////////////
+
+7. Hardware version 4
+ ==================
+
+7.1 Registers
+ ~~~~~~~~~
+* reg_07
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 0 0 0 0 0 A
+
+ A: 1 = enable absolute tracking
+
+7.2 Native absolute mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+v4 hardware is a true multitouch touchpad, capable of tracking up to 5 fingers.
+Unfortunately, due to PS/2's limited bandwidth, its packet format is rather
+complex.
+
+Whenever the numbers or identities of the fingers changes, the hardware sends a
+status packet to indicate how many and which fingers is on touchpad, followed by
+head packets or motion packets. A head packet contains data of finger id, finger
+position (absolute x, y values), width, and pressure. A motion packet contains
+two fingers' position delta.
+
+For example, when status packet tells there are 2 fingers on touchpad, then we
+can expect two following head packets. If the finger status doesn't change,
+the following packets would be motion packets, only sending delta of finger
+position, until we receive a status packet.
+
+One exception is one finger touch. when a status packet tells us there is only
+one finger, the hardware would just send head packets afterwards.
+
+7.2.1 Status packet
+ ~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . . 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . ft4 ft3 ft2 ft1 ft0
+
+ ft4 ft3 ft2 ft1 ft0 ftn = 1 when finger n is on touchpad
+
+byte 2: not used
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . 1 0 0 0 0
+
+ constant bits
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p . . . . . . .
+
+ p = 1 for palm
+
+byte 5: not used
+
+7.2.2 Head packet
+ ~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ w3 w2 w1 w0 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ w3..w0 = finger width (spans how many trace lines)
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ p7 p6 p5 p4 x11 x10 x9 x8
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 1 0 0 0 1
+
+ id2..id0 = finger id
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p3 p1 p2 p0 y11 y10 y9 y8
+
+ p7..p0 = pressure
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y11..y0 = absolute y value (vertical)
+
+7.2.3 Motion packet
+ ~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 w 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ id2..id0 = finger id
+ w = 1 when delta overflows (> 127 or < -128), in this case
+ firmware sends us (delta x / 5) and (delta y / 5)
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x7..x0 = delta x (two's complement)
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y7..y0 = delta y (two's complement)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 1 0 0 1 0
+
+ id2..id0 = finger id
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x7..x0 = delta x (two's complement)
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y7..y0 = delta y (two's complement)
+
+ byte 0 ~ 2 for one finger
+ byte 3 ~ 5 for another
unsigned char param[3];
int rc = 0;
- if (reg < 0x10 || reg > 0x26)
+ if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
}
break;
- case 3:
+ case 3 ... 4:
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
if (rc)
pr_err("failed to read register 0x%02x.\n", reg);
- else
+ else if (etd->hw_version != 4)
*val = param[0];
+ else
+ *val = param[1];
return rc;
}
struct elantech_data *etd = psmouse->private;
int rc = 0;
- if (reg < 0x10 || reg > 0x26)
+ if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
rc = -1;
}
break;
+
+ case 4:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, val) ||
+ elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
* byte 1: . . . . ax11 ax10 ax9 ax8
* byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
- etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
+ etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2];
/*
* byte 4: . . . . ay11 ay10 ay9 ay8
* byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
*/
- etd->prev_y = etd->y_max -
+ etd->mt[0].y = etd->y_max -
(((packet[4] & 0x0f) << 8) | packet[5]);
/*
* wait for next packet
}
/* packet_type == PACKET_V3_TAIL */
- x1 = etd->prev_x;
- y1 = etd->prev_y;
+ x1 = etd->mt[0].x;
+ y1 = etd->mt[0].y;
x2 = ((packet[1] & 0x0f) << 8) | packet[2];
y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
break;
input_sync(dev);
}
+static void elantech_input_sync_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ unsigned char *packet = psmouse->packet;
+
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_mt_report_pointer_emulation(dev, true);
+ input_sync(dev);
+}
+
+static void process_packet_status_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ unsigned char *packet = psmouse->packet;
+ unsigned fingers;
+ int i;
+
+ /* notify finger state change */
+ fingers = packet[1] & 0x1f;
+ for (i = 0; i < ETP_MAX_FINGERS; i++) {
+ if ((fingers & (1 << i)) == 0) {
+ input_mt_slot(dev, i);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
+ }
+ }
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void process_packet_head_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ int id = ((packet[3] & 0xe0) >> 5) - 1;
+ int pres, traces;
+
+ if (id < 0)
+ return;
+
+ etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2];
+ etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+ traces = (packet[0] & 0xf0) >> 4;
+
+ input_mt_slot(dev, id);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
+
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
+ input_report_abs(dev, ABS_MT_PRESSURE, pres);
+ input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width);
+ /* report this for backwards compatibility */
+ input_report_abs(dev, ABS_TOOL_WIDTH, traces);
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void process_packet_motion_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0;
+ int id, sid;
+
+ id = ((packet[0] & 0xe0) >> 5) - 1;
+ if (id < 0)
+ return;
+
+ sid = ((packet[3] & 0xe0) >> 5) - 1;
+ weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1;
+ /*
+ * Motion packets give us the delta of x, y values of specific fingers,
+ * but in two's complement. Let the compiler do the conversion for us.
+ * Also _enlarge_ the numbers to int, in case of overflow.
+ */
+ delta_x1 = (signed char)packet[1];
+ delta_y1 = (signed char)packet[2];
+ delta_x2 = (signed char)packet[4];
+ delta_y2 = (signed char)packet[5];
+
+ etd->mt[id].x += delta_x1 * weight;
+ etd->mt[id].y -= delta_y1 * weight;
+ input_mt_slot(dev, id);
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
+
+ if (sid >= 0) {
+ etd->mt[sid].x += delta_x2 * weight;
+ etd->mt[sid].y -= delta_y2 * weight;
+ input_mt_slot(dev, sid);
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y);
+ }
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void elantech_report_absolute_v4(struct psmouse *psmouse,
+ int packet_type)
+{
+ switch (packet_type) {
+ case PACKET_V4_STATUS:
+ process_packet_status_v4(psmouse);
+ break;
+
+ case PACKET_V4_HEAD:
+ process_packet_head_v4(psmouse);
+ break;
+
+ case PACKET_V4_MOTION:
+ process_packet_motion_v4(psmouse);
+ break;
+
+ case PACKET_UNKNOWN:
+ default:
+ /* impossible to get here */
+ break;
+ }
+}
+
static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
/*
* We check the constant bits to determine what packet type we get,
- * so packet checking is mandatory for v3 hardware.
+ * so packet checking is mandatory for v3 and later hardware.
*/
static int elantech_packet_check_v3(struct psmouse *psmouse)
{
return PACKET_UNKNOWN;
}
+static int elantech_packet_check_v4(struct psmouse *psmouse)
+{
+ unsigned char *packet = psmouse->packet;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x11)
+ return PACKET_V4_HEAD;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x12)
+ return PACKET_V4_MOTION;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x10)
+ return PACKET_V4_STATUS;
+
+ return PACKET_UNKNOWN;
+}
+
/*
* Process byte stream from mouse and handle complete packets
*/
elantech_report_absolute_v3(psmouse, packet_type);
break;
+
+ case 4:
+ packet_type = elantech_packet_check_v4(psmouse);
+ if (packet_type == PACKET_UNKNOWN)
+ return PSMOUSE_BAD_DATA;
+
+ elantech_report_absolute_v4(psmouse, packet_type);
+ break;
}
return PSMOUSE_FULL_PACKET;
rc = -1;
break;
+
+ case 4:
+ etd->reg_07 = 0x01;
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ rc = -1;
+
+ goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */
}
if (rc == 0) {
}
}
+ skip_readback_reg_10:
if (rc)
pr_err("failed to initialise registers.\n");
static int elantech_set_range(struct psmouse *psmouse,
unsigned int *x_min, unsigned int *y_min,
- unsigned int *x_max, unsigned int *y_max)
+ unsigned int *x_max, unsigned int *y_max,
+ unsigned int *width)
{
struct elantech_data *etd = psmouse->private;
unsigned char param[3];
+ unsigned char traces;
int i;
switch (etd->hw_version) {
*x_max = (0x0f & param[0]) << 8 | param[1];
*y_max = (0xf0 & param[0]) << 4 | param[2];
break;
+
+ case 4:
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ *x_max = (0x0f & param[0]) << 8 | param[1];
+ *y_max = (0xf0 & param[0]) << 4 | param[2];
+ traces = etd->capabilities[1];
+ if ((traces < 2) || (traces > *x_max))
+ return -1;
+
+ *width = *x_max / (traces - 1);
+ break;
}
return 0;
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
- unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
+ unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0;
- if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max))
+ if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
return -1;
__set_bit(EV_KEY, dev->evbit);
input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
break;
+
+ case 4:
+ __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
+ /* For X to recognize me as touchpad. */
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
+ /*
+ * range of pressure and width is the same as v2,
+ * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
+ */
+ input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
+ ETP_PMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
+ ETP_WMAX_V2, 0, 0);
+ /* Multitouch capable pad, up to 5 fingers. */
+ input_mt_init_slots(dev, ETP_MAX_FINGERS);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
+ ETP_PMAX_V2, 0, 0);
+ /*
+ * The firmware reports how many trace lines the finger spans,
+ * convert to surface unit as Protocol-B requires.
+ */
+ input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0,
+ ETP_WMAX_V2 * width, 0, 0);
+ break;
}
etd->y_max = y_max;
+ etd->width = width;
return 0;
}
elantech_show_int_attr, \
elantech_set_int_attr)
+ELANTECH_INT_ATTR(reg_07, 0x07);
ELANTECH_INT_ATTR(reg_10, 0x10);
ELANTECH_INT_ATTR(reg_11, 0x11);
ELANTECH_INT_ATTR(reg_20, 0x20);
ELANTECH_INT_ATTR(paritycheck, 0);
static struct attribute *elantech_attrs[] = {
+ &psmouse_attr_reg_07.dattr.attr,
&psmouse_attr_reg_10.dattr.attr,
&psmouse_attr_reg_11.dattr.attr,
&psmouse_attr_reg_20.dattr.attr,
*/
static int elantech_set_properties(struct elantech_data *etd)
{
+ int ver = (etd->fw_version & 0x0f0000) >> 16;
+
if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
etd->hw_version = 1;
else if (etd->fw_version < 0x150600)
etd->hw_version = 2;
- else if ((etd->fw_version & 0x0f0000) >> 16 == 5)
+ else if (ver == 5)
etd->hw_version = 3;
+ else if (ver == 6)
+ etd->hw_version = 4;
else
return -1;
git.openpandora.org / pandora-kernel.git / commitdiff