V4L/DVB: Rework for support xc5000

Set correct GPIO number for BEHOLD_WANDER/VOYAGER
Add xc5000 callback function
Small rework tm6000_cards_setup function
Small rework tm6000_config_tuner, build mode_mask by config information
Rework for support xc5000 silicon tuner
Add some information messages for more better understand an errors.

[mchehab@redhat.com: Fix CodingStyle and merge conflicts]
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 00d46ab..160b4d7 100644 (file)
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -231,7 +231,9 @@ struct tm6000_board tm6000_boards[] = {
                        .has_remote   = 1,
                },
                .gpio = {
-                       .tuner_reset    = TM6000_GPIO_2,
+                       .tuner_reset    = TM6010_GPIO_0,
+                       .demod_reset    = TM6010_GPIO_1,
+                       .power_led      = TM6010_GPIO_6,
                },
        },
        [TM6010_BOARD_BEHOLD_VOYAGER] = {
@@ -247,7 +249,8 @@ struct tm6000_board tm6000_boards[] = {
                        .has_remote   = 1,
                },
                .gpio = {
-                       .tuner_reset    = TM6000_GPIO_2,
+                       .tuner_reset    = TM6010_GPIO_0,
+                       .power_led      = TM6010_GPIO_6,
                },
        },
        [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
@@ -320,6 +323,31 @@ struct usb_device_id tm6000_id_table[] = {
        { },
 };
 
+/* Tuner callback to provide the proper gpio changes needed for xc5000 */
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
+{
+       int rc = 0;
+       struct tm6000_core *dev = ptr;
+
+       if (dev->tuner_type != TUNER_XC5000)
+               return 0;
+
+       switch (command) {
+       case XC5000_TUNER_RESET:
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+                              dev->gpio.tuner_reset, 0x01);
+               msleep(15);
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+                              dev->gpio.tuner_reset, 0x00);
+               msleep(15);
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+                              dev->gpio.tuner_reset, 0x01);
+               break;
+       }
+       return (rc);
+}
+
+
 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
 
 int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
@@ -454,6 +482,21 @@ int tm6000_cards_setup(struct tm6000_core *dev)
                tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
                msleep(15);
                break;
+       case TM6010_BOARD_BEHOLD_WANDER:
+               /* Power led on (blue) */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+               msleep(15);
+               /* Reset zarlink zl10353 */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+               msleep(50);
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+               msleep(15);
+               break;
+       case TM6010_BOARD_BEHOLD_VOYAGER:
+               /* Power led on (blue) */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+               msleep(15);
+               break;
        default:
                break;
        }
@@ -465,41 +508,34 @@ int tm6000_cards_setup(struct tm6000_core *dev)
         * If a device uses a different sequence or different GPIO pins for
         * reset, just add the code at the board-specific part
         */
-       for (i = 0; i < 2; i++) {
-               rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-                                       dev->gpio.tuner_reset, 0x00);
-               if (rc < 0) {
-                       printk(KERN_ERR "Error %i doing GPIO1 reset\n", rc);
-                       return rc;
-               }
-
-               msleep(10); /* Just to be conservative */
-               rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-                                       dev->gpio.tuner_reset, 0x01);
-               if (rc < 0) {
-                       printk(KERN_ERR "Error %i doing GPIO1 reset\n", rc);
-                       return rc;
-               }
 
-               msleep(10);
-               rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 0);
-               if (rc < 0) {
-                       printk(KERN_ERR "Error %i doing GPIO4 reset\n", rc);
-                       return rc;
-               }
+       if (dev->gpio.tuner_reset) {
+               for (i = 0; i < 2; i++) {
+                       rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+                                               dev->gpio.tuner_reset, 0x00);
+                       if (rc < 0) {
+                               printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+                               return rc;
+                       }
 
-               msleep(10);
-               rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 1);
-               if (rc < 0) {
-                       printk(KERN_ERR "Error %i doing GPIO4 reset\n", rc);
-                       return rc;
-               }
+                       msleep(10); /* Just to be conservative */
+                       rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+                                               dev->gpio.tuner_reset, 0x01);
+                       if (rc < 0) {
+                               printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+                               return rc;
+                       }
+                       msleep(10);
 
-               if (!i) {
-                       rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
-                       if (rc >= 0)
-                               printk(KERN_DEBUG "board=0x%08x\n", rc);
+                       if (!i) {
+                               rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
+                               if (rc >= 0)
+                                       printk(KERN_DEBUG "board=0x%08x\n", rc);
+                       }
                }
+       } else {
+               printk(KERN_ERR "Tuner reset is not configured\n");
+               return -1;
        }
 
        msleep(50);
@@ -518,12 +554,26 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
        memset(&tun_setup, 0, sizeof(tun_setup));
        tun_setup.type = dev->tuner_type;
        tun_setup.addr = dev->tuner_addr;
-       tun_setup.mode_mask = T_ANALOG_TV | T_RADIO | T_DIGITAL_TV;
-       tun_setup.tuner_callback = tm6000_tuner_callback;
+
+       tun_setup.mode_mask = 0;
+       if (dev->caps.has_tuner)
+               tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
+       if (dev->caps.has_dvb)
+               tun_setup.mode_mask |= T_DIGITAL_TV;
+
+       switch (dev->tuner_type) {
+       case TUNER_XC2028:
+               tun_setup.tuner_callback = tm6000_tuner_callback;;
+               break;
+       case TUNER_XC5000:
+               tun_setup.tuner_callback = tm6000_xc5000_callback;
+               break;
+       }
 
        v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
 
-       if (dev->tuner_type == TUNER_XC2028) {
+       switch (dev->tuner_type) {
+       case TUNER_XC2028: {
                struct v4l2_priv_tun_config xc2028_cfg;
                struct xc2028_ctrl ctl;
 
@@ -553,9 +603,31 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
                }
 
                printk(KERN_INFO "Setting firmware parameters for xc2028\n");
-
                v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
                                     &xc2028_cfg);
+
+               }
+               break;
+       case TUNER_XC5000:
+               {
+               struct v4l2_priv_tun_config  xc5000_cfg;
+               struct xc5000_config ctl = {
+                       .i2c_address = dev->tuner_addr,
+                       .if_khz      = 4570,
+                       .radio_input = XC5000_RADIO_FM1,
+                       };
+
+               xc5000_cfg.tuner = TUNER_XC5000;
+               xc5000_cfg.priv  = &ctl;
+
+
+               v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+                                    &xc5000_cfg);
+               }
+               break;
+       default:
+               printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
+               break;
        }
 }
 

diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
index 5a587f7..b49c139 100644 (file)
--- a/drivers/staging/tm6000/tm6000.h
+++ b/drivers/staging/tm6000/tm6000.h
@@ -222,6 +222,7 @@ struct tm6000_fh {
 /* In tm6000-cards.c */
 
 int tm6000_tuner_callback (void *ptr, int component, int command, int arg);
+int tm6000_xc5000_callback (void *ptr, int component, int command, int arg);
 int tm6000_cards_setup(struct tm6000_core *dev);
 
 /* In tm6000-core.c */