b43: Fix rfkill radio LED

This fixes Bug #9414

Since addition of the rfkill callback, the LED associated with the off
switch on the radio has not worked for several reasons:

(1) Essential data in the rfkill structure were missing.
(2) The rfkill structure was initialized after the LED initialization.
(3) There was a minor memory leak if the radio LED structure was inited.

Once the above problems were fixed, additional difficulties were noted:

(4) The radio LED was in the wrong state at startup.
(5) The radio switch had to be manipulated twice for each state change.
(6) A circular mutex locking situation existed.
(7) If rfkill-input is built as a module, it is not automatically loaded.

This patch fixes all of the above.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 19e5885..6c0e2b9 100644 (file)
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -163,6 +163,9 @@ static void b43_map_led(struct b43_wldev *dev,
                b43_register_led(dev, &dev->led_radio, name,
                                 b43_rfkill_led_name(dev),
                                 led_index, activelow);
+               /* Sync the RF-kill LED state with the switch state. */
+               if (dev->radio_hw_enable)
+                       b43_led_turn_on(dev, led_index, activelow);
                break;
        case B43_LED_WEIRD:
        case B43_LED_ASSOC:
@@ -232,4 +235,5 @@ void b43_leds_exit(struct b43_wldev *dev)
        b43_unregister_led(&dev->led_tx);
        b43_unregister_led(&dev->led_rx);
        b43_unregister_led(&dev->led_assoc);
+       b43_unregister_led(&dev->led_radio);
 }

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index b45eecc..1c93b4f 100644 (file)
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2163,7 +2163,6 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
 static void b43_chip_exit(struct b43_wldev *dev)
 {
        b43_radio_turn_off(dev, 1);
-       b43_leds_exit(dev);
        b43_gpio_cleanup(dev);
        /* firmware is released later */
 }
@@ -2191,11 +2190,10 @@ static int b43_chip_init(struct b43_wldev *dev)
        err = b43_gpio_init(dev);
        if (err)
                goto out;       /* firmware is released later */
-       b43_leds_init(dev);
 
        err = b43_upload_initvals(dev);
        if (err)
-               goto err_leds_exit;
+               goto err_gpio_clean;
        b43_radio_turn_on(dev);
 
        b43_write16(dev, 0x03E6, 0x0000);
@@ -2271,8 +2269,7 @@ out:
 
 err_radio_off:
        b43_radio_turn_off(dev, 1);
-err_leds_exit:
-       b43_leds_exit(dev);
+err_gpio_clean:
        b43_gpio_cleanup(dev);
        return err;
 }
@@ -3273,10 +3270,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
                return;
        b43_set_status(dev, B43_STAT_UNINIT);
 
-       mutex_unlock(&dev->wl->mutex);
-       b43_rfkill_exit(dev);
-       mutex_lock(&dev->wl->mutex);
-
+       b43_leds_exit(dev);
        b43_rng_exit(dev->wl);
        b43_pio_free(dev);
        b43_dma_free(dev);
@@ -3405,12 +3399,12 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
        memset(wl->mac_addr, 0, ETH_ALEN);
        b43_upload_card_macaddress(dev);
        b43_security_init(dev);
-       b43_rfkill_init(dev);
        b43_rng_init(wl);
 
        b43_set_status(dev, B43_STAT_INITIALIZED);
 
-      out:
+       b43_leds_init(dev);
+out:
        return err;
 
       err_chip_exit:
@@ -3499,6 +3493,10 @@ static int b43_start(struct ieee80211_hw *hw)
        int did_init = 0;
        int err = 0;
 
+       /* First register RFkill.
+        * LEDs that are registered later depend on it. */
+       b43_rfkill_init(dev);
+
        mutex_lock(&wl->mutex);
 
        if (b43_status(dev) < B43_STAT_INITIALIZED) {
@@ -3528,6 +3526,8 @@ static void b43_stop(struct ieee80211_hw *hw)
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev = wl->current_dev;
 
+       b43_rfkill_exit(dev);
+
        mutex_lock(&wl->mutex);
        if (b43_status(dev) >= B43_STAT_STARTED)
                b43_wireless_core_stop(dev);

diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 9b1f905..98cf70c 100644 (file)
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -25,6 +25,8 @@
 #include "rfkill.h"
 #include "b43.h"
 
+#include <linux/kmod.h>
+
 
 /* Returns TRUE, if the radio is enabled in hardware. */
 static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
@@ -50,7 +52,10 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
        bool report_change = 0;
 
        mutex_lock(&wl->mutex);
-       B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
+       if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) {
+               mutex_unlock(&wl->mutex);
+               return;
+       }
        enabled = b43_is_hw_radio_enabled(dev);
        if (unlikely(enabled != dev->radio_hw_enable)) {
                dev->radio_hw_enable = enabled;
@@ -60,8 +65,12 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
        }
        mutex_unlock(&wl->mutex);
 
-       if (unlikely(report_change))
-               input_report_key(poll_dev->input, KEY_WLAN, enabled);
+       /* send the radio switch event to the system - note both a key press
+        * and a release are required */
+       if (unlikely(report_change)) {
+               input_report_key(poll_dev->input, KEY_WLAN, 1);
+               input_report_key(poll_dev->input, KEY_WLAN, 0);
+       }
 }
 
 /* Called when the RFKILL toggled in software. */
@@ -69,13 +78,15 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
 {
        struct b43_wldev *dev = data;
        struct b43_wl *wl = dev->wl;
-       int err = 0;
+       int err = -EBUSY;
 
        if (!wl->rfkill.registered)
                return 0;
 
        mutex_lock(&wl->mutex);
-       B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
+       if (b43_status(dev) < B43_STAT_INITIALIZED)
+               goto out_unlock;
+       err = 0;
        switch (state) {
        case RFKILL_STATE_ON:
                if (!dev->radio_hw_enable) {
@@ -133,9 +144,25 @@ void b43_rfkill_init(struct b43_wldev *dev)
        rfk->poll_dev->poll = b43_rfkill_poll;
        rfk->poll_dev->poll_interval = 1000; /* msecs */
 
+       rfk->poll_dev->input->name = rfk->name;
+       rfk->poll_dev->input->id.bustype = BUS_HOST;
+       rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
+       rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
+       set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
+
        err = rfkill_register(rfk->rfkill);
        if (err)
                goto err_free_polldev;
+
+#ifdef CONFIG_RFKILL_INPUT_MODULE
+       /* B43 RF-kill isn't useful without the rfkill-input subsystem.
+        * Try to load the module. */
+       err = request_module("rfkill-input");
+       if (err)
+               b43warn(wl, "Failed to load the rfkill-input module. "
+                       "The built-in radio LED will not work.\n");
+#endif /* CONFIG_RFKILL_INPUT */
+
        err = input_register_polled_device(rfk->poll_dev);
        if (err)
                goto err_unreg_rfk;