plip: Move the PLIP driver

Move the Parallel Line Internet Protocol (PLIP) driver into
drivers/net/plip/ and make the necessary Kconfig and Makefile changes.

CC: Niibe Yutaka <gniibe@mri.co.jp>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1d8fa95..3f72686 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -197,6 +197,8 @@ source "drivers/net/ethernet/Kconfig"
 
 source "drivers/net/fddi/Kconfig"
 
+source "drivers/net/plip/Kconfig"
+
 source "drivers/net/tokenring/Kconfig"
 
 source "drivers/net/wireless/Kconfig"
@@ -272,41 +274,6 @@ config RIONET_RX_SIZE
        depends on RIONET
        default "128"
 
-config PLIP
-       tristate "PLIP (parallel port) support"
-       depends on PARPORT
-       ---help---
-         PLIP (Parallel Line Internet Protocol) is used to create a
-         reasonably fast mini network consisting of two (or, rarely, more)
-         local machines.  A PLIP link from a Linux box is a popular means to
-         install a Linux distribution on a machine which doesn't have a
-         CD-ROM drive (a minimal system has to be transferred with floppies
-         first). The kernels on both machines need to have this PLIP option
-         enabled for this to work.
-
-         The PLIP driver has two modes, mode 0 and mode 1.  The parallel
-         ports (the connectors at the computers with 25 holes) are connected
-         with "null printer" or "Turbo Laplink" cables which can transmit 4
-         bits at a time (mode 0) or with special PLIP cables, to be used on
-         bidirectional parallel ports only, which can transmit 8 bits at a
-         time (mode 1); you can find the wiring of these cables in
-         <file:Documentation/networking/PLIP.txt>.  The cables can be up to
-         15m long.  Mode 0 works also if one of the machines runs DOS/Windows
-         and has some PLIP software installed, e.g. the Crynwr PLIP packet
-         driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
-         and winsock or NCSA's telnet.
-
-         If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
-         as the NET-3-HOWTO, both available from
-         <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
-         protocol has been changed and this PLIP driver won't work together
-         with the PLIP support in Linux versions 1.0.x.  This option enlarges
-         your kernel by about 8 KB.
-
-         To compile this driver as a module, choose M here. The module
-         will be called plip. If unsure, say Y or M, in case you buy
-         a laptop later.
-
 config SLIP
        tristate "SLIP (serial line) support"
        ---help---

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index f64d02c..52dae95 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
 #
 # link order important here
 #
-obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_RIONET) += rionet.o
 
 #
@@ -39,6 +38,7 @@ obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
 obj-$(CONFIG_HIPPI) += hippi/
+obj-$(CONFIG_PLIP) += plip/
 onj-$(CONFIG_PPP) += ppp/
 obj-$(CONFIG_PPP_ASYNC) += ppp/
 obj-$(CONFIG_PPP_BSDCOMP) += ppp/

diff --git a/drivers/net/plip/Kconfig b/drivers/net/plip/Kconfig
new file mode 100644 (file)
index 0000000..80c4a33
--- /dev/null
+++ b/drivers/net/plip/Kconfig
@@ -0,0 +1,38 @@
+#
+# Parallel Line Internet Protocol (PLIP) network device configuration
+#
+
+config PLIP
+       tristate "PLIP (parallel port) support"
+       depends on PARPORT
+       ---help---
+         PLIP (Parallel Line Internet Protocol) is used to create a
+         reasonably fast mini network consisting of two (or, rarely, more)
+         local machines.  A PLIP link from a Linux box is a popular means to
+         install a Linux distribution on a machine which doesn't have a
+         CD-ROM drive (a minimal system has to be transferred with floppies
+         first). The kernels on both machines need to have this PLIP option
+         enabled for this to work.
+
+         The PLIP driver has two modes, mode 0 and mode 1.  The parallel
+         ports (the connectors at the computers with 25 holes) are connected
+         with "null printer" or "Turbo Laplink" cables which can transmit 4
+         bits at a time (mode 0) or with special PLIP cables, to be used on
+         bidirectional parallel ports only, which can transmit 8 bits at a
+         time (mode 1); you can find the wiring of these cables in
+         <file:Documentation/networking/PLIP.txt>.  The cables can be up to
+         15m long.  Mode 0 works also if one of the machines runs DOS/Windows
+         and has some PLIP software installed, e.g. the Crynwr PLIP packet
+         driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+         and winsock or NCSA's telnet.
+
+         If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+         as the NET-3-HOWTO, both available from
+         <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
+         protocol has been changed and this PLIP driver won't work together
+         with the PLIP support in Linux versions 1.0.x.  This option enlarges
+         your kernel by about 8 KB.
+
+         To compile this driver as a module, choose M here. The module
+         will be called plip. If unsure, say Y or M, in case you buy
+         a laptop later.

diff --git a/drivers/net/plip/Makefile b/drivers/net/plip/Makefile
new file mode 100644 (file)
index 0000000..ed95879
--- /dev/null
+++ b/drivers/net/plip/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the PLIP network device drivers.
+#
+
+obj-$(CONFIG_PLIP) += plip.o

diff --git a/drivers/net/plip.c b/drivers/net/plip/plip.c
similarity index 100%
rename from drivers/net/plip.c
rename to drivers/net/plip/plip.c