CRIS v32: Add new driver files for Artpec-3.
authorJesper Nilsson <jespern@stork.se.axis.com>
Thu, 29 Nov 2007 16:03:41 +0000 (17:03 +0100)
committerJesper Nilsson <jesper.nilsson@axis.com>
Fri, 8 Feb 2008 10:06:22 +0000 (11:06 +0100)
Adds gpio and nandflash handling for Artpec-3.

arch/cris/arch-v32/drivers/mach-a3/Makefile [new file with mode: 0644]
arch/cris/arch-v32/drivers/mach-a3/gpio.c [new file with mode: 0644]
arch/cris/arch-v32/drivers/mach-a3/nandflash.c [new file with mode: 0644]

diff --git a/arch/cris/arch-v32/drivers/mach-a3/Makefile b/arch/cris/arch-v32/drivers/mach-a3/Makefile
new file mode 100644 (file)
index 0000000..5c6d2a2
--- /dev/null
@@ -0,0 +1,6 @@
+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_NANDFLASH)   += nandflash.o
+obj-$(CONFIG_ETRAX_GPIO)        += gpio.o
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
new file mode 100644 (file)
index 0000000..4c48065
--- /dev/null
@@ -0,0 +1,984 @@
+/*
+ * Artec-3 general port I/O device
+ *
+ * Copyright (c) 2007 Axis Communications AB
+ *
+ * Authors:    Bjorn Wesen      (initial version)
+ *             Ola Knutsson     (LED handling)
+ *             Johan Adolfsson  (read/set directions, write, port G,
+ *                               port to ETRAX FS.
+ *             Ricard Wanderlof (PWM for Artpec-3)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/etraxgpio.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/gio_defs.h>
+#include <hwregs/intr_vect_defs.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/arch/mach/pinmux.h>
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+#include "../i2c.h"
+
+#define VIRT_I2C_ADDR 0x40
+#endif
+
+/* The following gio ports on ARTPEC-3 is available:
+ * pa 32 bits
+ * pb 32 bits
+ * pc 16 bits
+ * each port has a rw_px_dout, r_px_din and rw_px_oe register.
+ */
+
+#define GPIO_MAJOR 120  /* experimental MAJOR number */
+
+#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) \
+       do { \
+               dp_cnt++; \
+               if (dp_cnt % 1000 == 0) \
+                       x; \
+       } while (0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
+                             unsigned long arg);
+#endif
+static int gpio_ioctl(struct inode *inode, struct file *file,
+                     unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
+                         loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp,
+                             struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+       struct gpio_private *next;
+       /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
+       unsigned char clk_mask;
+       unsigned char data_mask;
+       unsigned char write_msb;
+       unsigned char pad1;
+       /* These fields are generic */
+       unsigned long highalarm, lowalarm;
+       wait_queue_head_t alarm_wq;
+       int minor;
+};
+
+static void gpio_set_alarm(struct gpio_private *priv);
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist;
+
+static int wanted_interrupts;
+
+static DEFINE_SPINLOCK(alarm_lock);
+
+#define NUM_PORTS (GPIO_MINOR_LAST+1)
+#define GIO_REG_RD_ADDR(reg) \
+       (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
+#define GIO_REG_WR_ADDR(reg) \
+       (volatile unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
+unsigned long led_dummy;
+unsigned long port_d_dummy;    /* Only input on Artpec-3 */
+unsigned long port_e_dummy;    /* Non existent on Artpec-3 */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static unsigned long virtual_dummy;
+static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
+static unsigned short cached_virtual_gpio_read;
+#endif
+
+static volatile unsigned long *data_out[NUM_PORTS] = {
+       GIO_REG_WR_ADDR(rw_pa_dout),
+       GIO_REG_WR_ADDR(rw_pb_dout),
+       &led_dummy,
+       GIO_REG_WR_ADDR(rw_pc_dout),
+       &port_d_dummy,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       &port_e_dummy,
+       &virtual_dummy,
+#endif
+};
+
+static volatile unsigned long *data_in[NUM_PORTS] = {
+       GIO_REG_RD_ADDR(r_pa_din),
+       GIO_REG_RD_ADDR(r_pb_din),
+       &led_dummy,
+       GIO_REG_RD_ADDR(r_pc_din),
+       GIO_REG_RD_ADDR(r_pd_din),
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       &port_e_dummy,
+       &virtual_dummy,
+#endif
+};
+
+static unsigned long changeable_dir[NUM_PORTS] = {
+       CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+       CONFIG_ETRAX_PB_CHANGEABLE_DIR,
+       0,
+       CONFIG_ETRAX_PC_CHANGEABLE_DIR,
+       0,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       0,
+       CONFIG_ETRAX_PV_CHANGEABLE_DIR,
+#endif
+};
+
+static unsigned long changeable_bits[NUM_PORTS] = {
+       CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+       CONFIG_ETRAX_PB_CHANGEABLE_BITS,
+       0,
+       CONFIG_ETRAX_PC_CHANGEABLE_BITS,
+       0,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       0,
+       CONFIG_ETRAX_PV_CHANGEABLE_BITS,
+#endif
+};
+
+static volatile unsigned long *dir_oe[NUM_PORTS] = {
+       GIO_REG_WR_ADDR(rw_pa_oe),
+       GIO_REG_WR_ADDR(rw_pb_oe),
+       &led_dummy,
+       GIO_REG_WR_ADDR(rw_pc_oe),
+       &port_d_dummy,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       &port_e_dummy,
+       &virtual_rw_pv_oe,
+#endif
+};
+
+static void
+gpio_set_alarm(struct gpio_private *priv)
+{
+       int bit;
+       int intr_cfg;
+       int mask;
+       int pins;
+       unsigned long flags;
+
+       local_irq_save(flags);
+       intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
+       pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
+       mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
+
+       for (bit = 0; bit < 32; bit++) {
+               int intr = bit % 8;
+               int pin = bit / 8;
+               if (priv->minor < GPIO_MINOR_LEDS)
+                       pin += priv->minor * 4;
+               else
+                       pin += (priv->minor - 1) * 4;
+
+               if (priv->highalarm & (1<<bit)) {
+                       intr_cfg |= (regk_gio_hi << (intr * 3));
+                       mask |= 1 << intr;
+                       wanted_interrupts = mask & 0xff;
+                       pins |= pin << (intr * 4);
+               } else if (priv->lowalarm & (1<<bit)) {
+                       intr_cfg |= (regk_gio_lo << (intr * 3));
+                       mask |= 1 << intr;
+                       wanted_interrupts = mask & 0xff;
+                       pins |= pin << (intr * 4);
+               }
+       }
+
+       REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
+       REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
+       REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
+
+       local_irq_restore(flags);
+}
+
+static unsigned int
+gpio_poll(struct file *file, struct poll_table_struct *wait)
+{
+       unsigned int mask = 0;
+       struct gpio_private *priv = (struct gpio_private *)file->private_data;
+       unsigned long data;
+       unsigned long tmp;
+
+       if (priv->minor >= GPIO_MINOR_PWM0 &&
+           priv->minor <= GPIO_MINOR_LAST_PWM)
+               return 0;
+
+       poll_wait(file, &priv->alarm_wq, wait);
+       if (priv->minor <= GPIO_MINOR_D) {
+               data = *data_in[priv->minor];
+               REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
+               tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
+               tmp &= I2C_INTERRUPT_BITS;
+               tmp |= wanted_interrupts;
+               REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
+       } else
+               return 0;
+
+       if ((data & priv->highalarm) || (~data & priv->lowalarm))
+               mask = POLLIN|POLLRDNORM;
+
+       DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
+       return mask;
+}
+
+static irqreturn_t
+gpio_interrupt(int irq, void *dev_id)
+{
+       reg_gio_rw_intr_mask intr_mask;
+       reg_gio_r_masked_intr masked_intr;
+       reg_gio_rw_ack_intr ack_intr;
+       unsigned long tmp;
+       unsigned long tmp2;
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       unsigned char enable_gpiov_ack = 0;
+#endif
+
+       /* Find what PA interrupts are active */
+       masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
+       tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
+
+       /* Find those that we have enabled */
+       spin_lock(&alarm_lock);
+       tmp &= wanted_interrupts;
+       spin_unlock(&alarm_lock);
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       /* Something changed on virtual GPIO. Interrupt is acked by
+        * reading the device.
+        */
+       if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
+               i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
+                       sizeof(cached_virtual_gpio_read));
+               enable_gpiov_ack = 1;
+       }
+#endif
+
+       /* Ack them */
+       ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
+       REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
+
+       /* Disable those interrupts.. */
+       intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+       tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
+       tmp2 &= ~tmp;
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       /* Do not disable interrupt on virtual GPIO. Changes on virtual
+        * pins are only noticed by an interrupt.
+        */
+       if (enable_gpiov_ack)
+               tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+       intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
+       REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+
+       return IRQ_RETVAL(tmp);
+}
+
+
+static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
+       loff_t *off)
+{
+       struct gpio_private *priv = (struct gpio_private *)file->private_data;
+       unsigned char data, clk_mask, data_mask, write_msb;
+       unsigned long flags;
+       unsigned long shadow;
+       volatile unsigned long *port;
+       ssize_t retval = count;
+       /* Only bits 0-7 may be used for write operations but allow all
+          devices except leds... */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       if (priv->minor == GPIO_MINOR_V)
+               return -EFAULT;
+#endif
+       if (priv->minor == GPIO_MINOR_LEDS)
+               return -EFAULT;
+
+       if (priv->minor >= GPIO_MINOR_PWM0 &&
+           priv->minor <= GPIO_MINOR_LAST_PWM)
+               return -EFAULT;
+
+       if (!access_ok(VERIFY_READ, buf, count))
+               return -EFAULT;
+
+       clk_mask = priv->clk_mask;
+       data_mask = priv->data_mask;
+       /* It must have been configured using the IO_CFG_WRITE_MODE */
+       /* Perhaps a better error code? */
+       if (clk_mask == 0 || data_mask == 0)
+               return -EPERM;
+
+       write_msb = priv->write_msb;
+       D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
+               "msb: %i\n",
+               count, data_mask, clk_mask, write_msb));
+       port = data_out[priv->minor];
+
+       while (count--) {
+               int i;
+               data = *buf++;
+               if (priv->write_msb) {
+                       for (i = 7; i >= 0; i--) {
+                               local_irq_save(flags);
+                               shadow = *port;
+                               *port = shadow &= ~clk_mask;
+                               if (data & 1<<i)
+                                       *port = shadow |= data_mask;
+                               else
+                                       *port = shadow &= ~data_mask;
+                       /* For FPGA: min 5.0ns (DCC) before CCLK high */
+                               *port = shadow |= clk_mask;
+                               local_irq_restore(flags);
+                       }
+               } else {
+                       for (i = 0; i <= 7; i++) {
+                               local_irq_save(flags);
+                               shadow = *port;
+                               *port = shadow &= ~clk_mask;
+                               if (data & 1<<i)
+                                       *port = shadow |= data_mask;
+                               else
+                                       *port = shadow &= ~data_mask;
+                       /* For FPGA: min 5.0ns (DCC) before CCLK high */
+                               *port = shadow |= clk_mask;
+                               local_irq_restore(flags);
+                       }
+               }
+       }
+       return retval;
+}
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+       struct gpio_private *priv;
+       int p = iminor(inode);
+
+       if (p > GPIO_MINOR_LAST_PWM ||
+           (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
+               return -EINVAL;
+
+       priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
+
+       if (!priv)
+               return -ENOMEM;
+       memset(priv, 0, sizeof(*priv));
+
+       priv->minor = p;
+       filp->private_data = (void *)priv;
+
+       /* initialize the io/alarm struct, not for PWM ports though  */
+       if (p <= GPIO_MINOR_LAST) {
+
+               priv->clk_mask = 0;
+               priv->data_mask = 0;
+               priv->highalarm = 0;
+               priv->lowalarm = 0;
+
+               init_waitqueue_head(&priv->alarm_wq);
+
+               /* link it into our alarmlist */
+               spin_lock_irq(&alarm_lock);
+               priv->next = alarmlist;
+               alarmlist = priv;
+               spin_unlock_irq(&alarm_lock);
+       }
+
+       return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+       struct gpio_private *p;
+       struct gpio_private *todel;
+       /* local copies while updating them: */
+       unsigned long a_high, a_low;
+
+       /* prepare to free private structure */
+       todel = (struct gpio_private *)filp->private_data;
+
+       /* unlink from alarmlist - only for non-PWM ports though */
+       if (todel->minor <= GPIO_MINOR_LAST) {
+               spin_lock_irq(&alarm_lock);
+               p = alarmlist;
+
+               if (p == todel)
+                       alarmlist = todel->next;
+                else {
+                       while (p->next != todel)
+                               p = p->next;
+                       p->next = todel->next;
+               }
+
+               /* Check if there are still any alarms set */
+               p = alarmlist;
+               a_high = 0;
+               a_low = 0;
+               while (p) {
+                       if (p->minor == GPIO_MINOR_A) {
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+                               p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+                               a_high |= p->highalarm;
+                               a_low |= p->lowalarm;
+                       }
+
+                       p = p->next;
+               }
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       /* Variable 'a_low' needs to be set here again
+        * to ensure that interrupt for virtual GPIO is handled.
+        */
+               a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+
+               spin_unlock_irq(&alarm_lock);
+       }
+       kfree(todel);
+
+       return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
+{
+       /* Set direction 0=unchanged 1=input,
+        * return mask with 1=input
+        */
+       unsigned long flags;
+       unsigned long dir_shadow;
+
+       local_irq_save(flags);
+       dir_shadow = *dir_oe[priv->minor];
+       dir_shadow &= ~(arg & changeable_dir[priv->minor]);
+       *dir_oe[priv->minor] = dir_shadow;
+       local_irq_restore(flags);
+
+       if (priv->minor == GPIO_MINOR_C)
+               dir_shadow ^= 0xFFFF;           /* Only 16 bits */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       else if (priv->minor == GPIO_MINOR_V)
+               dir_shadow ^= 0xFFFF;           /* Only 16 bits */
+#endif
+       else
+               dir_shadow ^= 0xFFFFFFFF;       /* PA, PB and PD 32 bits */
+
+       return dir_shadow;
+
+} /* setget_input */
+
+inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
+{
+       unsigned long flags;
+       unsigned long dir_shadow;
+
+       local_irq_save(flags);
+       dir_shadow = *dir_oe[priv->minor];
+       dir_shadow |=  (arg & changeable_dir[priv->minor]);
+       *dir_oe[priv->minor] = dir_shadow;
+       local_irq_restore(flags);
+       return dir_shadow;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl(struct inode *inode, struct file *file,
+          unsigned int cmd, unsigned long arg)
+{
+       unsigned long flags;
+       unsigned long val;
+       unsigned long shadow;
+       struct gpio_private *priv = (struct gpio_private *)file->private_data;
+
+       if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
+               return -EINVAL;
+
+       /* Check for special ioctl handlers first */
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       if (priv->minor == GPIO_MINOR_V)
+               return virtual_gpio_ioctl(file, cmd, arg);
+#endif
+
+       if (priv->minor == GPIO_MINOR_LEDS)
+               return gpio_leds_ioctl(cmd, arg);
+
+       if (priv->minor >= GPIO_MINOR_PWM0 &&
+           priv->minor <= GPIO_MINOR_LAST_PWM)
+               return gpio_pwm_ioctl(priv, cmd, arg);
+
+       switch (_IOC_NR(cmd)) {
+       case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+               /* Read the port. */
+               return *data_in[priv->minor];
+               break;
+       case IO_SETBITS:
+               local_irq_save(flags);
+               /* Set changeable bits with a 1 in arg. */
+               shadow = *data_out[priv->minor];
+               shadow |=  (arg & changeable_bits[priv->minor]);
+               *data_out[priv->minor] = shadow;
+               local_irq_restore(flags);
+               break;
+       case IO_CLRBITS:
+               local_irq_save(flags);
+               /* Clear changeable bits with a 1 in arg. */
+               shadow = *data_out[priv->minor];
+               shadow &=  ~(arg & changeable_bits[priv->minor]);
+               *data_out[priv->minor] = shadow;
+               local_irq_restore(flags);
+               break;
+       case IO_HIGHALARM:
+               /* Set alarm when bits with 1 in arg go high. */
+               priv->highalarm |= arg;
+               gpio_set_alarm(priv);
+               break;
+       case IO_LOWALARM:
+               /* Set alarm when bits with 1 in arg go low. */
+               priv->lowalarm |= arg;
+               gpio_set_alarm(priv);
+               break;
+       case IO_CLRALARM:
+               /* Clear alarm for bits with 1 in arg. */
+               priv->highalarm &= ~arg;
+               priv->lowalarm  &= ~arg;
+               gpio_set_alarm(priv);
+               break;
+       case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+               /* Read direction 0=input 1=output */
+               return *dir_oe[priv->minor];
+       case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+               /* Set direction 0=unchanged 1=input,
+                * return mask with 1=input
+                */
+               return setget_input(priv, arg);
+               break;
+       case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+               /* Set direction 0=unchanged 1=output,
+                * return mask with 1=output
+                */
+               return setget_output(priv, arg);
+
+       case IO_CFG_WRITE_MODE:
+       {
+               unsigned long dir_shadow;
+               dir_shadow = *dir_oe[priv->minor];
+
+               priv->clk_mask = arg & 0xFF;
+               priv->data_mask = (arg >> 8) & 0xFF;
+               priv->write_msb = (arg >> 16) & 0x01;
+               /* Check if we're allowed to change the bits and
+                * the direction is correct
+                */
+               if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+                     (priv->data_mask & changeable_bits[priv->minor]) &&
+                     (priv->clk_mask & dir_shadow) &&
+                     (priv->data_mask & dir_shadow))) {
+                       priv->clk_mask = 0;
+                       priv->data_mask = 0;
+                       return -EPERM;
+               }
+               break;
+       }
+       case IO_READ_INBITS:
+               /* *arg is result of reading the input pins */
+               val = *data_in[priv->minor];
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               return 0;
+               break;
+       case IO_READ_OUTBITS:
+                /* *arg is result of reading the output shadow */
+               val = *data_out[priv->minor];
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               break;
+       case IO_SETGET_INPUT:
+               /* bits set in *arg is set to input,
+                * *arg updated with current input pins.
+                */
+               if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+                       return -EFAULT;
+               val = setget_input(priv, val);
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               break;
+       case IO_SETGET_OUTPUT:
+               /* bits set in *arg is set to output,
+                * *arg updated with current output pins.
+                */
+               if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+                       return -EFAULT;
+               val = setget_output(priv, val);
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               break;
+       default:
+               return -EINVAL;
+       } /* switch */
+
+       return 0;
+}
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static int
+virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+       unsigned long flags;
+       unsigned short val;
+       unsigned short shadow;
+       struct gpio_private *priv = (struct gpio_private *)file->private_data;
+
+       switch (_IOC_NR(cmd)) {
+       case IO_SETBITS:
+               local_irq_save(flags);
+               /* Set changeable bits with a 1 in arg. */
+               i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+               shadow |= ~*dir_oe[priv->minor];
+               shadow |= (arg & changeable_bits[priv->minor]);
+               i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+               local_irq_restore(flags);
+               break;
+       case IO_CLRBITS:
+               local_irq_save(flags);
+               /* Clear changeable bits with a 1 in arg. */
+               i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+               shadow |= ~*dir_oe[priv->minor];
+               shadow &= ~(arg & changeable_bits[priv->minor]);
+               i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+               local_irq_restore(flags);
+               break;
+       case IO_HIGHALARM:
+               /* Set alarm when bits with 1 in arg go high. */
+               priv->highalarm |= arg;
+               break;
+       case IO_LOWALARM:
+               /* Set alarm when bits with 1 in arg go low. */
+               priv->lowalarm |= arg;
+               break;
+       case IO_CLRALARM:
+               /* Clear alarm for bits with 1 in arg. */
+               priv->highalarm &= ~arg;
+               priv->lowalarm  &= ~arg;
+               break;
+       case IO_CFG_WRITE_MODE:
+       {
+               unsigned long dir_shadow;
+               dir_shadow = *dir_oe[priv->minor];
+
+               priv->clk_mask = arg & 0xFF;
+               priv->data_mask = (arg >> 8) & 0xFF;
+               priv->write_msb = (arg >> 16) & 0x01;
+               /* Check if we're allowed to change the bits and
+                * the direction is correct
+                */
+               if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+                     (priv->data_mask & changeable_bits[priv->minor]) &&
+                     (priv->clk_mask & dir_shadow) &&
+                     (priv->data_mask & dir_shadow))) {
+                       priv->clk_mask = 0;
+                       priv->data_mask = 0;
+                       return -EPERM;
+               }
+               break;
+       }
+       case IO_READ_INBITS:
+               /* *arg is result of reading the input pins */
+               val = cached_virtual_gpio_read;
+               val &= ~*dir_oe[priv->minor];
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               return 0;
+               break;
+       case IO_READ_OUTBITS:
+                /* *arg is result of reading the output shadow */
+               i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
+               val &= *dir_oe[priv->minor];
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               break;
+       case IO_SETGET_INPUT:
+       {
+               /* bits set in *arg is set to input,
+                * *arg updated with current input pins.
+                */
+               unsigned short input_mask = ~*dir_oe[priv->minor];
+               if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+                       return -EFAULT;
+               val = setget_input(priv, val);
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               if ((input_mask & val) != input_mask) {
+                       /* Input pins changed. All ports desired as input
+                        * should be set to logic 1.
+                        */
+                       unsigned short change = input_mask ^ val;
+                       i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
+                               sizeof(shadow));
+                       shadow &= ~change;
+                       shadow |= val;
+                       i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
+                               sizeof(shadow));
+               }
+               break;
+       }
+       case IO_SETGET_OUTPUT:
+               /* bits set in *arg is set to output,
+                * *arg updated with current output pins.
+                */
+               if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+                       return -EFAULT;
+               val = setget_output(priv, val);
+               if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+                       return -EFAULT;
+               break;
+       default:
+               return -EINVAL;
+       } /* switch */
+       return 0;
+}
+#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+       unsigned char green;
+       unsigned char red;
+
+       switch (_IOC_NR(cmd)) {
+       case IO_LEDACTIVE_SET:
+               green = ((unsigned char) arg) & 1;
+               red   = (((unsigned char) arg) >> 1) & 1;
+               LED_ACTIVE_SET_G(green);
+               LED_ACTIVE_SET_R(red);
+               break;
+
+       default:
+               return -EINVAL;
+       } /* switch */
+
+       return 0;
+}
+
+static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
+{
+       int pinmux_pwm = pinmux_pwm0 + pwm_port;
+       int mode;
+       reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
+               .ccd_val = 0,
+               .ccd_override = regk_gio_no,
+               .mode = regk_gio_no
+       };
+       int allocstatus;
+
+       if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
+               return -EFAULT;
+       rw_pwm_ctrl.mode = mode;
+       if (mode != PWM_OFF)
+               allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
+       else
+               allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
+       if (allocstatus)
+               return allocstatus;
+       REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
+               12 * pwm_port, rw_pwm_ctrl);
+       return 0;
+}
+
+static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
+{
+       struct io_pwm_set_period periods;
+       reg_gio_rw_pwm0_var rw_pwm_widths;
+
+       if (copy_from_user(&periods, (struct io_pwm_set_period *) arg,
+                       sizeof(periods)))
+               return -EFAULT;
+       if (periods.lo > 8191 || periods.hi > 8191)
+               return -EINVAL;
+       rw_pwm_widths.lo = periods.lo;
+       rw_pwm_widths.hi = periods.hi;
+       REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
+               12 * pwm_port, rw_pwm_widths);
+       return 0;
+}
+
+static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
+{
+       unsigned int duty;
+       reg_gio_rw_pwm0_data rw_pwm_duty;
+
+       if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
+               return -EFAULT;
+       if (duty > 255)
+               return -EINVAL;
+       rw_pwm_duty.data = duty;
+       REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
+               12 * pwm_port, rw_pwm_duty);
+       return 0;
+}
+
+static int
+gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg)
+{
+       int pwm_port = priv->minor - GPIO_MINOR_PWM0;
+
+       switch (_IOC_NR(cmd)) {
+       case IO_PWM_SET_MODE:
+               return gpio_pwm_set_mode(arg, pwm_port);
+       case IO_PWM_SET_PERIOD:
+               return gpio_pwm_set_period(arg, pwm_port);
+       case IO_PWM_SET_DUTY:
+               return gpio_pwm_set_duty(arg, pwm_port);
+       default:
+               return -EINVAL;
+       }
+       return 0;
+}
+
+struct file_operations gpio_fops = {
+       .owner       = THIS_MODULE,
+       .poll        = gpio_poll,
+       .ioctl       = gpio_ioctl,
+       .write       = gpio_write,
+       .open        = gpio_open,
+       .release     = gpio_release,
+};
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static void
+virtual_gpio_init(void)
+{
+       reg_gio_rw_intr_cfg intr_cfg;
+       reg_gio_rw_intr_mask intr_mask;
+       unsigned short shadow;
+
+       shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
+       shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
+       i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+
+       /* Set interrupt mask and on what state the interrupt shall trigger.
+        * For virtual gpio the interrupt shall trigger on logic '0'.
+        */
+       intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
+       intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+
+       switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
+       case 0:
+               intr_cfg.pa0 = regk_gio_lo;
+               intr_mask.pa0 = regk_gio_yes;
+               break;
+       case 1:
+               intr_cfg.pa1 = regk_gio_lo;
+               intr_mask.pa1 = regk_gio_yes;
+               break;
+       case 2:
+               intr_cfg.pa2 = regk_gio_lo;
+               intr_mask.pa2 = regk_gio_yes;
+               break;
+       case 3:
+               intr_cfg.pa3 = regk_gio_lo;
+               intr_mask.pa3 = regk_gio_yes;
+               break;
+       case 4:
+               intr_cfg.pa4 = regk_gio_lo;
+               intr_mask.pa4 = regk_gio_yes;
+               break;
+       case 5:
+               intr_cfg.pa5 = regk_gio_lo;
+               intr_mask.pa5 = regk_gio_yes;
+               break;
+       case 6:
+               intr_cfg.pa6 = regk_gio_lo;
+               intr_mask.pa6 = regk_gio_yes;
+               break;
+       case 7:
+               intr_cfg.pa7 = regk_gio_lo;
+               intr_mask.pa7 = regk_gio_yes;
+               break;
+       }
+
+       REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
+       REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+}
+#endif
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+       int res;
+
+       /* do the formalities */
+
+       res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+       if (res < 0) {
+               printk(KERN_ERR "gpio: couldn't get a major number.\n");
+               return res;
+       }
+
+       /* Clear all leds */
+       LED_NETWORK_GRP0_SET(0);
+       LED_NETWORK_GRP1_SET(0);
+       LED_ACTIVE_SET(0);
+       LED_DISK_READ(0);
+       LED_DISK_WRITE(0);
+
+       printk(KERN_INFO "ETRAX FS GPIO driver v2.6, (c) 2003-2007 "
+               "Axis Communications AB\n");
+       if (request_irq(GIO_INTR_VECT, gpio_interrupt,
+                       IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist))
+               printk(KERN_ERR "err: irq for gpio\n");
+
+       /* No IRQs by default. */
+       REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+       virtual_gpio_init();
+#endif
+
+       return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
new file mode 100644 (file)
index 0000000..2fda3db
--- /dev/null
@@ -0,0 +1,178 @@
+/*
+ *  arch/cris/arch-v32/drivers/nandflash.c
+ *
+ *  Copyright (c) 2007
+ *
+ *  Derived from drivers/mtd/nand/spia.c
+ *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/arch/memmap.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/pio_defs.h>
+#include <pinmux.h>
+#include <asm/io.h>
+
+#define MANUAL_ALE_CLE_CONTROL 1
+
+#define regf_ALE       a0
+#define regf_CLE       a1
+#define regf_NCE       ce0_n
+
+#define CLE_BIT 10
+#define ALE_BIT 11
+#define CE_BIT 12
+
+/* Bitmask for control pins */
+#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT))
+
+static struct mtd_info *crisv32_mtd;
+/*
+ *     hardware specific access to control-lines
+ */
+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
+                             unsigned int ctrl)
+{
+       unsigned long flags;
+       reg_pio_rw_dout dout;
+       struct nand_chip *this = mtd->priv;
+
+       local_irq_save(flags);
+
+       /* control bits change */
+       if (ctrl & NAND_CTRL_CHANGE) {
+               dout = REG_RD(pio, regi_pio, rw_dout);
+               dout.regf_NCE = (ctrl & NAND_NCE) ? 0 : 1;
+
+#if !MANUAL_ALE_CLE_CONTROL
+               if (ctrl & NAND_ALE) {
+                       /* A0 = ALE high */
+                       this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+                               regi_pio, rw_io_access1);
+               } else if (ctrl & NAND_CLE) {
+                       /* A1 = CLE high */
+                       this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+                               regi_pio, rw_io_access2);
+               } else {
+                       /* A1 = CLE and A0 = ALE low */
+                       this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+                               regi_pio, rw_io_access0);
+               }
+#else
+
+               dout.regf_CLE = (ctrl & NAND_CLE) ? 1 : 0;
+               dout.regf_ALE = (ctrl & NAND_ALE) ? 1 : 0;
+#endif
+               REG_WR(pio, regi_pio, rw_dout, dout);
+       }
+
+       /* command to chip */
+       if (cmd != NAND_CMD_NONE)
+               writeb(cmd, this->IO_ADDR_W);
+
+       local_irq_restore(flags);
+}
+
+/*
+*      read device ready pin
+*/
+int crisv32_device_ready(struct mtd_info *mtd)
+{
+       reg_pio_r_din din = REG_RD(pio, regi_pio, r_din);
+       return din.rdy;
+}
+
+/*
+ * Main initialization routine
+ */
+struct mtd_info *__init crisv32_nand_flash_probe(void)
+{
+       void __iomem *read_cs;
+       void __iomem *write_cs;
+
+       struct nand_chip *this;
+       int err = 0;
+
+       reg_pio_rw_man_ctrl man_ctrl = {
+               .regf_NCE = regk_pio_yes,
+#if MANUAL_ALE_CLE_CONTROL
+               .regf_ALE = regk_pio_yes,
+               .regf_CLE = regk_pio_yes
+#endif
+       };
+       reg_pio_rw_oe oe = {
+               .regf_NCE = regk_pio_yes,
+#if MANUAL_ALE_CLE_CONTROL
+               .regf_ALE = regk_pio_yes,
+               .regf_CLE = regk_pio_yes
+#endif
+       };
+       reg_pio_rw_dout dout = { .regf_NCE = 1 };
+
+       /* Allocate pio pins to pio */
+       crisv32_pinmux_alloc_fixed(pinmux_pio);
+       /* Set up CE, ALE, CLE (ce0_n, a0, a1) for manual control and output */
+       REG_WR(pio, regi_pio, rw_man_ctrl, man_ctrl);
+       REG_WR(pio, regi_pio, rw_dout, dout);
+       REG_WR(pio, regi_pio, rw_oe, oe);
+
+       /* Allocate memory for MTD device structure and private data */
+       crisv32_mtd = kmalloc(sizeof(struct mtd_info) +
+               sizeof(struct nand_chip), GFP_KERNEL);
+       if (!crisv32_mtd) {
+               printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD "
+                       "device structure.\n");
+               err = -ENOMEM;
+               return NULL;
+       }
+
+       read_cs = write_cs = (void __iomem *)REG_ADDR(pio, regi_pio,
+               rw_io_access0);
+
+       /* Get pointer to private data */
+       this = (struct nand_chip *) (&crisv32_mtd[1]);
+
+       /* Initialize structures */
+       memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info));
+       memset((char *) this, 0, sizeof(struct nand_chip));
+
+       /* Link the private data with the MTD structure */
+       crisv32_mtd->priv = this;
+
+       /* Set address of NAND IO lines */
+       this->IO_ADDR_R = read_cs;
+       this->IO_ADDR_W = write_cs;
+       this->cmd_ctrl = crisv32_hwcontrol;
+       this->dev_ready = crisv32_device_ready;
+       /* 20 us command delay time */
+       this->chip_delay = 20;
+       this->ecc.mode = NAND_ECC_SOFT;
+
+       /* Enable the following for a flash based bad block table */
+       /* this->options = NAND_USE_FLASH_BBT; */
+
+       /* Scan to find existance of the device */
+       if (nand_scan(crisv32_mtd, 1)) {
+               err = -ENXIO;
+               goto out_mtd;
+       }
+
+       return crisv32_mtd;
+
+out_mtd:
+       kfree(crisv32_mtd);
+       return NULL;
+}
+