scsi_activate_tcq - turn on tag command queueing
scsi_add_device - creates new scsi device (lu) instance
scsi_add_host - perform sysfs registration and SCSI bus scan.
- scsi_add_timer - (re-)start timer on a SCSI command.
scsi_adjust_queue_depth - change the queue depth on a SCSI device
scsi_assign_lock - replace default host_lock with given lock
scsi_bios_ptable - return copy of block device's partition table
scsi_block_requests - prevent further commands being queued to given host
scsi_deactivate_tcq - turn off tag command queueing
- scsi_delete_timer - cancel timer on a SCSI command.
scsi_host_alloc - return a new scsi_host instance whose refcount==1
scsi_host_get - increments Scsi_Host instance's refcount
scsi_host_put - decrements Scsi_Host instance's refcount (free if 0)
int scsi_add_host(struct Scsi_Host *shost, struct device * dev)
-/**
- * scsi_add_timer - (re-)start timer on a SCSI command.
- * @scmd: pointer to scsi command instance
- * @timeout: duration of timeout in "jiffies"
- * @complete: pointer to function to call if timeout expires
- *
- * Returns nothing
- *
- * Might block: no
- *
- * Notes: Each scsi command has its own timer, and as it is added
- * to the queue, we set up the timer. When the command completes,
- * we cancel the timer. An LLD can use this function to change
- * the existing timeout value.
- *
- * Defined in: drivers/scsi/scsi_error.c
- **/
-void scsi_add_timer(struct scsi_cmnd *scmd, int timeout,
- void (*complete)(struct scsi_cmnd *))
-
-
/**
* scsi_adjust_queue_depth - allow LLD to change queue depth on a SCSI device
* @sdev: pointer to SCSI device to change queue depth on
void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
-/**
- * scsi_delete_timer - cancel timer on a SCSI command.
- * @scmd: pointer to scsi command instance
- *
- * Returns 1 if able to cancel timer else 0 (i.e. too late or already
- * cancelled).
- *
- * Might block: no [may in the future if it invokes del_timer_sync()]
- *
- * Notes: All commands issued by upper levels already have a timeout
- * associated with them. An LLD can use this function to cancel the
- * timer.
- *
- * Defined in: drivers/scsi/scsi_error.c
- **/
-int scsi_delete_timer(struct scsi_cmnd *scmd)
-
-
/**
* scsi_host_alloc - create a scsi host adapter instance and perform basic
* initialization.
/* This is a private structure used to tie the classdev and the
* container .. it should never be visible outside this file */
struct internal_container {
- struct list_head node;
+ struct klist_node node;
struct attribute_container *cont;
struct class_device classdev;
};
+static void internal_container_klist_get(struct klist_node *n)
+{
+ struct internal_container *ic =
+ container_of(n, struct internal_container, node);
+ class_device_get(&ic->classdev);
+}
+
+static void internal_container_klist_put(struct klist_node *n)
+{
+ struct internal_container *ic =
+ container_of(n, struct internal_container, node);
+ class_device_put(&ic->classdev);
+}
+
+
/**
* attribute_container_classdev_to_container - given a classdev, return the container
*
attribute_container_register(struct attribute_container *cont)
{
INIT_LIST_HEAD(&cont->node);
- INIT_LIST_HEAD(&cont->containers);
- spin_lock_init(&cont->containers_lock);
+ klist_init(&cont->containers,internal_container_klist_get,
+ internal_container_klist_put);
down(&attribute_container_mutex);
list_add_tail(&cont->node, &attribute_container_list);
{
int retval = -EBUSY;
down(&attribute_container_mutex);
- spin_lock(&cont->containers_lock);
- if (!list_empty(&cont->containers))
+ spin_lock(&cont->containers.k_lock);
+ if (!list_empty(&cont->containers.k_list))
goto out;
retval = 0;
list_del(&cont->node);
out:
- spin_unlock(&cont->containers_lock);
+ spin_unlock(&cont->containers.k_lock);
up(&attribute_container_mutex);
return retval;
continue;
}
memset(ic, 0, sizeof(struct internal_container));
- INIT_LIST_HEAD(&ic->node);
ic->cont = cont;
class_device_initialize(&ic->classdev);
ic->classdev.dev = get_device(dev);
fn(cont, dev, &ic->classdev);
else
attribute_container_add_class_device(&ic->classdev);
- spin_lock(&cont->containers_lock);
- list_add_tail(&ic->node, &cont->containers);
- spin_unlock(&cont->containers_lock);
+ klist_add_tail(&ic->node, &cont->containers);
}
up(&attribute_container_mutex);
}
+/* FIXME: can't break out of this unless klist_iter_exit is also
+ * called before doing the break
+ */
+#define klist_for_each_entry(pos, head, member, iter) \
+ for (klist_iter_init(head, iter); (pos = ({ \
+ struct klist_node *n = klist_next(iter); \
+ n ? container_of(n, typeof(*pos), member) : \
+ ({ klist_iter_exit(iter) ; NULL; }); \
+ }) ) != NULL; )
+
+
/**
* attribute_container_remove_device - make device eligible for removal.
*
down(&attribute_container_mutex);
list_for_each_entry(cont, &attribute_container_list, node) {
- struct internal_container *ic, *tmp;
+ struct internal_container *ic;
+ struct klist_iter iter;
if (attribute_container_no_classdevs(cont))
continue;
if (!cont->match(cont, dev))
continue;
- spin_lock(&cont->containers_lock);
- list_for_each_entry_safe(ic, tmp, &cont->containers, node) {
+
+ klist_for_each_entry(ic, &cont->containers, node, &iter) {
if (dev != ic->classdev.dev)
continue;
- list_del(&ic->node);
+ klist_del(&ic->node);
if (fn)
fn(cont, dev, &ic->classdev);
else {
class_device_unregister(&ic->classdev);
}
}
- spin_unlock(&cont->containers_lock);
}
up(&attribute_container_mutex);
}
down(&attribute_container_mutex);
list_for_each_entry(cont, &attribute_container_list, node) {
- struct internal_container *ic, *tmp;
+ struct internal_container *ic;
+ struct klist_iter iter;
if (!cont->match(cont, dev))
continue;
continue;
}
- spin_lock(&cont->containers_lock);
- list_for_each_entry_safe(ic, tmp, &cont->containers, node) {
+ klist_for_each_entry(ic, &cont->containers, node, &iter) {
if (dev == ic->classdev.dev)
fn(cont, dev, &ic->classdev);
}
- spin_unlock(&cont->containers_lock);
}
up(&attribute_container_mutex);
}
{
struct class_device *cdev = NULL;
struct internal_container *ic;
+ struct klist_iter iter;
- spin_lock(&cont->containers_lock);
- list_for_each_entry(ic, &cont->containers, node) {
+ klist_for_each_entry(ic, &cont->containers, node, &iter) {
if (ic->classdev.dev == dev) {
cdev = &ic->classdev;
+ /* FIXME: must exit iterator then break */
+ klist_iter_exit(&iter);
break;
}
}
- spin_unlock(&cont->containers_lock);
return cdev;
}
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.07
+ * mpi.h Version: 01.05.08
*
* Version History
* ---------------
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
+ * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
+ * TargetAssistExtended requests.
+ * Added EEDP IOCStatus codes.
* --------------------------------------------------------------------------
*/
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x09)
+#define MPI_HEADER_VERSION_UNIT (0x0A)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI_FUNCTION_DIAG_BUFFER_POST (0x1D)
#define MPI_FUNCTION_DIAG_RELEASE (0x1E)
+#define MPI_FUNCTION_SCSI_IO_32 (0x1F)
+
#define MPI_FUNCTION_LAN_SEND (0x20)
#define MPI_FUNCTION_LAN_RECEIVE (0x21)
#define MPI_FUNCTION_LAN_RESET (0x22)
+#define MPI_FUNCTION_TARGET_ASSIST_EXTENDED (0x23)
#define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24)
#define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25)
#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
+/****************************************************************************/
+/* For use by SCSI Initiator and SCSI Target end-to-end data protection */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
+#define MPI_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
+#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
+
+
/****************************************************************************/
/* SCSI Target values */
/****************************************************************************/
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.08
+ * mpi_cnfg.h Version: 01.05.09
*
* Version History
* ---------------
* New physical mapping mode in SAS IO Unit Page 2.
* Added CONFIG_PAGE_SAS_ENCLOSURE_0.
* Added Slot and Enclosure fields to SAS Device Page 0.
+ * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
+ * Added more RAID type defines to IOC Page 2.
+ * Added Port Enable Delay settings to BIOS Page 1.
+ * Added Bad Block Table Full define to RAID Volume Page 0.
+ * Added Previous State defines to RAID Physical Disk
+ * Page 0.
+ * Added Max Sata Targets define for DiscoveryStatus field
+ * of SAS IO Unit Page 0.
+ * Added Device Self Test to Control Flags of SAS IO Unit
+ * Page 1.
+ * Added Direct Attach Starting Slot Number define for SAS
+ * IO Unit Page 2.
+ * Added new fields in SAS Device Page 2 for enclosure
+ * mapping.
+ * Added OwnerDevHandle and Flags field to SAS PHY Page 0.
+ * Added IOC GPIO Flags define to SAS Enclosure Page 0.
+ * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* --------------------------------------------------------------------------
*/
#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626)
#define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642)
#define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640)
+#define MPI_MANUFACTPAGE_DEVICEID_FC949ES (0x0646)
/* SCSI */
#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030)
#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031)
} CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
IOCPage1_t, MPI_POINTER pIOCPage1_t;
-#define MPI_IOCPAGE1_PAGEVERSION (0x02)
+#define MPI_IOCPAGE1_PAGEVERSION (0x03)
/* defines for the Flags field */
+#define MPI_IOCPAGE1_EEDP_MODE_MASK (0x07000000)
+#define MPI_IOCPAGE1_EEDP_MODE_OFF (0x00000000)
+#define MPI_IOCPAGE1_EEDP_MODE_T10 (0x01000000)
+#define MPI_IOCPAGE1_EEDP_MODE_LSI_1 (0x02000000)
#define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE (0x00000010)
#define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001)
#define MPI_RAID_VOL_TYPE_IS (0x00)
#define MPI_RAID_VOL_TYPE_IME (0x01)
#define MPI_RAID_VOL_TYPE_IM (0x02)
+#define MPI_RAID_VOL_TYPE_RAID_5 (0x03)
+#define MPI_RAID_VOL_TYPE_RAID_6 (0x04)
+#define MPI_RAID_VOL_TYPE_RAID_10 (0x05)
+#define MPI_RAID_VOL_TYPE_RAID_50 (0x06)
+#define MPI_RAID_VOL_TYPE_UNKNOWN (0xFF)
/* IOC Page 2 Volume Flags values */
} CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
IOCPage2_t, MPI_POINTER pIOCPage2_t;
-#define MPI_IOCPAGE2_PAGEVERSION (0x02)
+#define MPI_IOCPAGE2_PAGEVERSION (0x03)
/* IOC Page 2 Capabilities flags */
#define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001)
#define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002)
#define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT (0x00000008)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040)
#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000)
#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000)
#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000)
} CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
-#define MPI_BIOSPAGE1_PAGEVERSION (0x01)
+#define MPI_BIOSPAGE1_PAGEVERSION (0x02)
/* values for the BiosOptions field */
#define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400)
#define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
/* values for the IOCSettings field */
+#define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000)
+#define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20)
#define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
#define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
#define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
#define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER (0x03)
#define MPI_BIOSPAGE2_FORM_FC_WWN (0x04)
#define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05)
+#define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
/****************************************************************************
RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;
/* RAID Volume Page 0 VolumeStatus defines */
-
#define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01)
#define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02)
#define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04)
#define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08)
+#define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x10)
#define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00)
#define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01)
} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
-#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x04)
+#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x05)
/* values for RAID Volume Page 0 InactiveStatus field */
#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
#define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01)
#define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02)
#define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x04)
+#define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00)
+#define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x08)
#define MPI_PHYSDISK0_STATUS_ONLINE (0x00)
#define MPI_PHYSDISK0_STATUS_MISSING (0x01)
} CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;
-#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x01)
+#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x02)
typedef struct _RAID_PHYS_DISK1_PATH
} CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
-#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x02)
+#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x03)
/* values for SAS IO Unit Page 0 PortFlags */
#define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08)
#define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
#define MPI_SAS_IOUNIT0_DS_TABLE_LINK (0x00000400)
#define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
+#define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS (0x00001000)
typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x04)
/* values for SAS IO Unit Page 1 ControlFlags */
+#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x10)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02)
-#define MPI_SAS_IOUNIT1_CONTROL_AUTO_PORT_SAME_SAS_ADDR (0x0100)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
-#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x03)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x04)
/* values for SAS IO Unit Page 2 Status field */
#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
#define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02)
#define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10)
+#define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT (0x20)
typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3
{
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
U64 PhysicalIdentifier; /* 08h */
- U32 Reserved1; /* 10h */
+ U32 EnclosureMapping; /* 10h */
} CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2,
SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t;
-#define MPI_SASDEVICE2_PAGEVERSION (0x00)
+#define MPI_SASDEVICE2_PAGEVERSION (0x01)
+
+/* defines for SAS Device Page 2 EnclosureMapping field */
+#define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT (0x0000000F)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT (0)
+#define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS (0x000007F0)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS (4)
+#define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX (0x001FF800)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX (11)
/****************************************************************************
typedef struct _CONFIG_PAGE_SAS_PHY_0
{
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
- U32 Reserved1; /* 08h */
+ U16 OwnerDevHandle; /* 08h */
+ U16 Reserved1; /* 0Ah */
U64 SASAddress; /* 0Ch */
U16 AttachedDevHandle; /* 14h */
U8 AttachedPhyIdentifier; /* 16h */
U8 ProgrammedLinkRate; /* 20h */
U8 HwLinkRate; /* 21h */
U8 ChangeCount; /* 22h */
- U8 Reserved3; /* 23h */
+ U8 Flags; /* 23h */
U32 PhyInfo; /* 24h */
} CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;
-#define MPI_SASPHY0_PAGEVERSION (0x00)
+#define MPI_SASPHY0_PAGEVERSION (0x01)
/* values for SAS PHY Page 0 ProgrammedLinkRate field */
#define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK (0xF0)
#define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 (0x09)
+/* values for SAS PHY Page 0 Flags field */
+#define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
+
/* values for SAS PHY Page 0 PhyInfo field */
#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR (0x00002000)
} CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0,
SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t;
-#define MPI_SASENCLOSURE0_PAGEVERSION (0x00)
+#define MPI_SASENCLOSURE0_PAGEVERSION (0x01)
/* values for SAS Enclosure Page 0 Flags field */
#define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID (0x0020)
#define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
#define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
#define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
+#define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
/****************************************************************************
Copyright (c) 2000-2005 LSI Logic Corporation.
---------------------------------------
- Header Set Release Version: 01.05.09
+ Header Set Release Version: 01.05.10
Header Set Release Date: 03-11-05
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi.h 01.05.07 01.05.06
- mpi_ioc.h 01.05.08 01.05.07
- mpi_cnfg.h 01.05.08 01.05.07
- mpi_init.h 01.05.04 01.05.03
- mpi_targ.h 01.05.04 01.05.03
+ mpi.h 01.05.08 01.05.07
+ mpi_ioc.h 01.05.09 01.05.08
+ mpi_cnfg.h 01.05.09 01.05.08
+ mpi_init.h 01.05.05 01.05.04
+ mpi_targ.h 01.05.05 01.05.04
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02
mpi_inb.h 01.05.01 01.05.01
mpi_sas.h 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01
- mpi_history.txt 01.05.09 01.05.08
+ mpi_history.txt 01.05.09 01.05.09
* Date Version Description
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
+ * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
+ * TargetAssistExtended requests.
+ * Added EEDP IOCStatus codes.
* --------------------------------------------------------------------------
mpi_ioc.h
* Reply and IOC Init Request.
* 03-11-05 01.05.08 Added family code for 1068E family.
* Removed IOCFacts Reply EEDP Capability bit.
+ * 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
+ * Added Max SATA Targets to SAS Discovery Error event.
* --------------------------------------------------------------------------
mpi_cnfg.h
* New physical mapping mode in SAS IO Unit Page 2.
* Added CONFIG_PAGE_SAS_ENCLOSURE_0.
* Added Slot and Enclosure fields to SAS Device Page 0.
+ * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
+ * Added more RAID type defines to IOC Page 2.
+ * Added Port Enable Delay settings to BIOS Page 1.
+ * Added Bad Block Table Full define to RAID Volume Page 0.
+ * Added Previous State defines to RAID Physical Disk
+ * Page 0.
+ * Added Max Sata Targets define for DiscoveryStatus field
+ * of SAS IO Unit Page 0.
+ * Added Device Self Test to Control Flags of SAS IO Unit
+ * Page 1.
+ * Added Direct Attach Starting Slot Number define for SAS
+ * IO Unit Page 2.
+ * Added new fields in SAS Device Page 2 for enclosure
+ * mapping.
+ * Added OwnerDevHandle and Flags field to SAS PHY Page 0.
+ * Added IOC GPIO Flags define to SAS Enclosure Page 0.
+ * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* --------------------------------------------------------------------------
mpi_init.h
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
+ * 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
+ * Added four new defines for SEP SlotStatus.
* --------------------------------------------------------------------------
mpi_targ.h
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
+ * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
* --------------------------------------------------------------------------
mpi_fc.h
mpi_history.txt Parts list history
-Filename 01.05.09
----------- --------
-mpi.h 01.05.07
-mpi_ioc.h 01.05.08
-mpi_cnfg.h 01.05.08
-mpi_init.h 01.05.04
-mpi_targ.h 01.05.04
-mpi_fc.h 01.05.01
-mpi_lan.h 01.05.01
-mpi_raid.h 01.05.02
-mpi_tool.h 01.05.03
-mpi_inb.h 01.05.01
-mpi_sas.h 01.05.01
-mpi_type.h 01.05.01
+Filename 01.05.10 01.05.09
+---------- -------- --------
+mpi.h 01.05.08 01.05.07
+mpi_ioc.h 01.05.09 01.05.08
+mpi_cnfg.h 01.05.09 01.05.08
+mpi_init.h 01.05.05 01.05.04
+mpi_targ.h 01.05.05 01.05.04
+mpi_fc.h 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01
+mpi_raid.h 01.05.02 01.05.02
+mpi_tool.h 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01
+mpi_sas.h 01.05.01 01.05.01
+mpi_type.h 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
- * mpi_init.h Version: 01.05.04
+ * mpi_init.h Version: 01.05.05
*
* Version History
* ---------------
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
+ * 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
+ * Added four new defines for SEP SlotStatus.
* --------------------------------------------------------------------------
*/
#define MPI_SCSI_TASKTAG_UNKNOWN (0xFFFF)
+/****************************************************************************/
+/* SCSI IO 32 messages and associated structures */
+/****************************************************************************/
+
+typedef struct
+{
+ U8 CDB[20]; /* 00h */
+ U32 PrimaryReferenceTag; /* 14h */
+ U16 PrimaryApplicationTag; /* 18h */
+ U16 PrimaryApplicationTagMask; /* 1Ah */
+ U32 TransferLength; /* 1Ch */
+} MPI_SCSI_IO32_CDB_EEDP32, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP32,
+ MpiScsiIo32CdbEedp32_t, MPI_POINTER pMpiScsiIo32CdbEedp32_t;
+
+typedef struct
+{
+ U8 CDB[16]; /* 00h */
+ U32 DataLength; /* 10h */
+ U32 PrimaryReferenceTag; /* 14h */
+ U16 PrimaryApplicationTag; /* 18h */
+ U16 PrimaryApplicationTagMask; /* 1Ah */
+ U32 TransferLength; /* 1Ch */
+} MPI_SCSI_IO32_CDB_EEDP16, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP16,
+ MpiScsiIo32CdbEedp16_t, MPI_POINTER pMpiScsiIo32CdbEedp16_t;
+
+typedef union
+{
+ U8 CDB32[32];
+ MPI_SCSI_IO32_CDB_EEDP32 EEDP32;
+ MPI_SCSI_IO32_CDB_EEDP16 EEDP16;
+ SGE_SIMPLE_UNION SGE;
+} MPI_SCSI_IO32_CDB_UNION, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_UNION,
+ MpiScsiIo32Cdb_t, MPI_POINTER pMpiScsiIo32Cdb_t;
+
+typedef struct
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U16 Reserved1; /* 02h */
+ U32 Reserved2; /* 04h */
+} MPI_SCSI_IO32_BUS_TARGET_ID_FORM, MPI_POINTER PTR_MPI_SCSI_IO32_BUS_TARGET_ID_FORM,
+ MpiScsiIo32BusTargetIdForm_t, MPI_POINTER pMpiScsiIo32BusTargetIdForm_t;
+
+typedef union
+{
+ MPI_SCSI_IO32_BUS_TARGET_ID_FORM SCSIID;
+ U64 WWID;
+} MPI_SCSI_IO32_ADDRESS, MPI_POINTER PTR_MPI_SCSI_IO32_ADDRESS,
+ MpiScsiIo32Address_t, MPI_POINTER pMpiScsiIo32Address_t;
+
+typedef struct _MSG_SCSI_IO32_REQUEST
+{
+ U8 Port; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Flags; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 LUN[8]; /* 0Ch */
+ U32 Control; /* 14h */
+ MPI_SCSI_IO32_CDB_UNION CDB; /* 18h */
+ U32 DataLength; /* 38h */
+ U32 BidirectionalDataLength; /* 3Ch */
+ U32 SecondaryReferenceTag; /* 40h */
+ U16 SecondaryApplicationTag; /* 44h */
+ U16 Reserved2; /* 46h */
+ U16 EEDPFlags; /* 48h */
+ U16 ApplicationTagTranslationMask; /* 4Ah */
+ U32 EEDPBlockSize; /* 4Ch */
+ MPI_SCSI_IO32_ADDRESS DeviceAddress; /* 50h */
+ U8 SGLOffset0; /* 58h */
+ U8 SGLOffset1; /* 59h */
+ U8 SGLOffset2; /* 5Ah */
+ U8 SGLOffset3; /* 5Bh */
+ U32 Reserved3; /* 5Ch */
+ U32 Reserved4; /* 60h */
+ U32 SenseBufferLowAddr; /* 64h */
+ SGE_IO_UNION SGL; /* 68h */
+} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
+ SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
+
+/* SCSI IO 32 MsgFlags bits */
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH (0x01)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_32 (0x00)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_64 (0x01)
+
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION (0x02)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST (0x00)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_IOC (0x02)
+
+#define MPI_SCSIIO32_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
+#define MPI_SCSIIO32_MSGFLGS_SGL_OFFSETS_CHAINS (0x08)
+#define MPI_SCSIIO32_MSGFLGS_MULTICAST (0x10)
+#define MPI_SCSIIO32_MSGFLGS_BIDIRECTIONAL (0x20)
+#define MPI_SCSIIO32_MSGFLGS_LARGE_CDB (0x40)
+
+/* SCSI IO 32 Flags bits */
+#define MPI_SCSIIO32_FLAGS_FORM_MASK (0x03)
+#define MPI_SCSIIO32_FLAGS_FORM_SCSIID (0x00)
+#define MPI_SCSIIO32_FLAGS_FORM_WWID (0x01)
+
+/* SCSI IO 32 LUN fields */
+#define MPI_SCSIIO32_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI_SCSIIO32_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI_SCSIIO32_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI_SCSIIO32_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI_SCSIIO32_LUN_LEVEL_1_WORD (0xFF00)
+#define MPI_SCSIIO32_LUN_LEVEL_1_DWORD (0x0000FF00)
+
+/* SCSI IO 32 Control bits */
+#define MPI_SCSIIO32_CONTROL_DATADIRECTION_MASK (0x03000000)
+#define MPI_SCSIIO32_CONTROL_NODATATRANSFER (0x00000000)
+#define MPI_SCSIIO32_CONTROL_WRITE (0x01000000)
+#define MPI_SCSIIO32_CONTROL_READ (0x02000000)
+#define MPI_SCSIIO32_CONTROL_BIDIRECTIONAL (0x03000000)
+
+#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_MASK (0xFC000000)
+#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_SHIFT (26)
+
+#define MPI_SCSIIO32_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
+#define MPI_SCSIIO32_CONTROL_SIMPLEQ (0x00000000)
+#define MPI_SCSIIO32_CONTROL_HEADOFQ (0x00000100)
+#define MPI_SCSIIO32_CONTROL_ORDEREDQ (0x00000200)
+#define MPI_SCSIIO32_CONTROL_ACAQ (0x00000400)
+#define MPI_SCSIIO32_CONTROL_UNTAGGED (0x00000500)
+#define MPI_SCSIIO32_CONTROL_NO_DISCONNECT (0x00000700)
+
+#define MPI_SCSIIO32_CONTROL_TASKMANAGE_MASK (0x00FF0000)
+#define MPI_SCSIIO32_CONTROL_OBSOLETE (0x00800000)
+#define MPI_SCSIIO32_CONTROL_CLEAR_ACA_RSV (0x00400000)
+#define MPI_SCSIIO32_CONTROL_TARGET_RESET (0x00200000)
+#define MPI_SCSIIO32_CONTROL_LUN_RESET_RSV (0x00100000)
+#define MPI_SCSIIO32_CONTROL_RESERVED (0x00080000)
+#define MPI_SCSIIO32_CONTROL_CLR_TASK_SET_RSV (0x00040000)
+#define MPI_SCSIIO32_CONTROL_ABORT_TASK_SET (0x00020000)
+#define MPI_SCSIIO32_CONTROL_RESERVED2 (0x00010000)
+
+/* SCSI IO 32 EEDPFlags */
+#define MPI_SCSIIO32_EEDPFLAGS_MASK_OP (0x0007)
+#define MPI_SCSIIO32_EEDPFLAGS_NOOP_OP (0x0000)
+#define MPI_SCSIIO32_EEDPFLAGS_CHK_OP (0x0001)
+#define MPI_SCSIIO32_EEDPFLAGS_STRIP_OP (0x0002)
+#define MPI_SCSIIO32_EEDPFLAGS_CHKRM_OP (0x0003)
+#define MPI_SCSIIO32_EEDPFLAGS_INSERT_OP (0x0004)
+#define MPI_SCSIIO32_EEDPFLAGS_REPLACE_OP (0x0006)
+#define MPI_SCSIIO32_EEDPFLAGS_CHKREGEN_OP (0x0007)
+
+#define MPI_SCSIIO32_EEDPFLAGS_PASS_REF_TAG (0x0008)
+#define MPI_SCSIIO32_EEDPFLAGS_8_9THS_MODE (0x0010)
+
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_MASK (0x0700)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_GUARD (0x0100)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_REFTAG (0x0200)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_LBATAG (0x0400)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_SHIFT (8)
+
+#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
+
+
+/* SCSIIO32 IO reply structure */
+typedef struct _MSG_SCSIIO32_IO_REPLY
+{
+ U8 Port; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Flags; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 SCSIStatus; /* 0Ch */
+ U8 SCSIState; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TransferCount; /* 14h */
+ U32 SenseCount; /* 18h */
+ U32 ResponseInfo; /* 1Ch */
+ U16 TaskTag; /* 20h */
+ U16 Reserved2; /* 22h */
+ U32 BidirectionalTransferCount; /* 24h */
+} MSG_SCSIIO32_IO_REPLY, MPI_POINTER PTR_MSG_SCSIIO32_IO_REPLY,
+ SCSIIO32Reply_t, MPI_POINTER pSCSIIO32Reply_t;
+
+
/****************************************************************************/
/* SCSI Task Management messages */
/****************************************************************************/
#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI_SEP_REQ_SLOTSTATUS_REQ_CONSISTENCY_CHECK (0x00001000)
+#define MPI_SEP_REQ_SLOTSTATUS_DISABLE (0x00002000)
+#define MPI_SEP_REQ_SLOTSTATUS_REQ_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000)
#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000)
+#define MPI_SEP_REQ_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000)
#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI_SEP_REPLY_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000)
+#define MPI_SEP_REPLY_SLOTSTATUS_DISABLE (0x00002000)
+#define MPI_SEP_REPLY_SLOTSTATUS_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000)
#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000)
#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
+#define MPI_SEP_REPLY_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.08
+ * mpi_ioc.h Version: 01.05.09
*
* Version History
* ---------------
* Reply and IOC Init Request.
* 03-11-05 01.05.08 Added family code for 1068E family.
* Removed IOCFacts Reply EEDP Capability bit.
+ * 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
+ * Added Max SATA Targets to SAS Discovery Error event.
* --------------------------------------------------------------------------
*/
#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
-
+#define MPI_IOCFACTS_CAPABILITY_EEDP (0x00000040)
+#define MPI_IOCFACTS_CAPABILITY_BIDIRECTIONAL (0x00000080)
+#define MPI_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
+#define MPI_IOCFACTS_CAPABILITY_SCSIIO32 (0x00000200)
+#define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16 (0x00000400)
/*****************************************************************************
#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_SUBTRACTIVE (0x00000200)
#define MPI_EVENT_DSCVRY_ERR_DS_TABLE_TO_TABLE (0x00000400)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800)
+#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000)
/*****************************************************************************
* Title: MPI Target mode messages and structures
* Creation Date: June 22, 2000
*
- * mpi_targ.h Version: 01.05.04
+ * mpi_targ.h Version: 01.05.05
*
* Version History
* ---------------
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
+ * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
* --------------------------------------------------------------------------
*/
TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t;
+/****************************************************************************/
+/* Target Assist Extended Request */
+/****************************************************************************/
+
+typedef struct _MSG_TARGET_ASSIST_EXT_REQUEST
+{
+ U8 StatusCode; /* 00h */
+ U8 TargetAssistFlags; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 QueueTag; /* 04h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 ReplyWord; /* 0Ch */
+ U8 LUN[8]; /* 10h */
+ U32 RelativeOffset; /* 18h */
+ U32 Reserved2; /* 1Ch */
+ U32 Reserved3; /* 20h */
+ U32 PrimaryReferenceTag; /* 24h */
+ U16 PrimaryApplicationTag; /* 28h */
+ U16 PrimaryApplicationTagMask; /* 2Ah */
+ U32 Reserved4; /* 2Ch */
+ U32 DataLength; /* 30h */
+ U32 BidirectionalDataLength; /* 34h */
+ U32 SecondaryReferenceTag; /* 38h */
+ U16 SecondaryApplicationTag; /* 3Ch */
+ U16 Reserved5; /* 3Eh */
+ U16 EEDPFlags; /* 40h */
+ U16 ApplicationTagTranslationMask; /* 42h */
+ U32 EEDPBlockSize; /* 44h */
+ U8 SGLOffset0; /* 48h */
+ U8 SGLOffset1; /* 49h */
+ U8 SGLOffset2; /* 4Ah */
+ U8 SGLOffset3; /* 4Bh */
+ U32 Reserved6; /* 4Ch */
+ SGE_IO_UNION SGL[1]; /* 50h */
+} MSG_TARGET_ASSIST_EXT_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_EXT_REQUEST,
+ TargetAssistExtRequest_t, MPI_POINTER pTargetAssistExtRequest_t;
+
+/* see the defines after MSG_TARGET_ASSIST_REQUEST for TargetAssistFlags */
+
+/* defines for the MsgFlags field */
+#define TARGET_ASSIST_EXT_MSGFLAGS_BIDIRECTIONAL (0x20)
+#define TARGET_ASSIST_EXT_MSGFLAGS_MULTICAST (0x10)
+#define TARGET_ASSIST_EXT_MSGFLAGS_SGL_OFFSET_CHAINS (0x08)
+
+/* defines for the EEDPFlags field */
+#define TARGET_ASSIST_EXT_EEDP_MASK_OP (0x0007)
+#define TARGET_ASSIST_EXT_EEDP_NOOP_OP (0x0000)
+#define TARGET_ASSIST_EXT_EEDP_CHK_OP (0x0001)
+#define TARGET_ASSIST_EXT_EEDP_STRIP_OP (0x0002)
+#define TARGET_ASSIST_EXT_EEDP_CHKRM_OP (0x0003)
+#define TARGET_ASSIST_EXT_EEDP_INSERT_OP (0x0004)
+#define TARGET_ASSIST_EXT_EEDP_REPLACE_OP (0x0006)
+#define TARGET_ASSIST_EXT_EEDP_CHKREGEN_OP (0x0007)
+
+#define TARGET_ASSIST_EXT_EEDP_PASS_REF_TAG (0x0008)
+
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_MASK (0x0700)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_GUARD (0x0100)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_APPTAG (0x0200)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_REFTAG (0x0400)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_SHIFT (8)
+
+#define TARGET_ASSIST_EXT_EEDP_INC_SEC_APPTAG (0x1000)
+#define TARGET_ASSIST_EXT_EEDP_INC_PRI_APPTAG (0x2000)
+#define TARGET_ASSIST_EXT_EEDP_INC_SEC_REFTAG (0x4000)
+#define TARGET_ASSIST_EXT_EEDP_INC_PRI_REFTAG (0x8000)
+
+
/****************************************************************************/
/* Target Status Send Request */
/****************************************************************************/
* (also referred to as a IO Controller or IOC).
* This routine must clear the interrupt from the adapter and does
* so by reading the reply FIFO. Multiple replies may be processed
- * per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR
- * which is currently set to 32 in mptbase.h.
+ * per single call to this routine.
*
* This routine handles register-level access of the adapter but
* dispatches (calls) a protocol-specific callback routine to handle
cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
- dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x\n",
- ioc->name, mr, req_idx));
+ dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
+ ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
DBG_DUMP_REPLY_FRAME(mr)
- /* Check/log IOC log info
+ /* Check/log IOC log info
*/
ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
|| (mf < ioc->req_frames)) ) {
printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx);
+ "mpt_interrupt: Invalid mf (%p)!\n", ioc->name, (void *)mf);
cb_idx = 0;
pa = 0;
freeme = 0;
* @mf: Pointer to original MPT request frame
* @reply: Pointer to MPT reply frame (NULL if TurboReply)
*
- * Returns 1 indicating original alloc'd request frame ptr
+ * Returns 1 indicating original alloc'd request frame ptr
* should be freed, or 0 if it shouldn't.
*/
static int
int freereq = 1;
u8 func;
- dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
-
- if ((mf == NULL) ||
- (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
- printk(MYIOC_s_ERR_FMT "NULL or BAD request frame ptr! (=%p)\n",
- ioc->name, (void *)mf);
- return 1;
- }
-
- if (reply == NULL) {
- dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event (turbo?) reply!\n",
- ioc->name));
- return 1;
- }
+ dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
+#if defined(MPT_DEBUG_MSG_FRAME)
if (!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
dmfprintk((KERN_INFO MYNAM ": Original request frame (@%p) header\n", mf));
DBG_DUMP_REQUEST_FRAME_HDR(mf)
}
+#endif
func = reply->u.hdr.Function;
- dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
+ dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
ioc->name, func));
if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
* Hmmm... It seems that EventNotificationReply is an exception
* to the rule of one reply per request.
*/
- if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
+ if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
freereq = 0;
+ devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
+ ioc->name, pEvReply));
+ } else {
+ devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
+ ioc->name, pEvReply));
+ }
#ifdef CONFIG_PROC_FS
// LogEvent(ioc, pEvReply);
pCfg->status = status;
if (status == MPI_IOCSTATUS_SUCCESS) {
- pCfg->hdr->PageVersion = pReply->Header.PageVersion;
- pCfg->hdr->PageLength = pReply->Header.PageLength;
- pCfg->hdr->PageNumber = pReply->Header.PageNumber;
- pCfg->hdr->PageType = pReply->Header.PageType;
+ if ((pReply->Header.PageType &
+ MPI_CONFIG_PAGETYPE_MASK) ==
+ MPI_CONFIG_PAGETYPE_EXTENDED) {
+ pCfg->cfghdr.ehdr->ExtPageLength =
+ le16_to_cpu(pReply->ExtPageLength);
+ pCfg->cfghdr.ehdr->ExtPageType =
+ pReply->ExtPageType;
+ }
+ pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+
+ /* If this is a regular header, save PageLength. */
+ /* LMP Do this better so not using a reserved field! */
+ pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+ pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+ pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
}
}
if (dd_cbfunc->remove)
dd_cbfunc->remove(ioc->pcidev);
}
-
+
MptDeviceDriverHandlers[cb_idx] = NULL;
}
}
#endif
- mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
+ mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, ioc->RequestNB[req_idx]));
CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
}
/* Make sure there are no doorbells */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-
+
CHIPREG_WRITE32(&ioc->chip->Doorbell,
((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
return -5;
dhsprintk((KERN_INFO MYNAM ": %s: mpt_send_handshake_request start, WaitCnt=%d\n",
- ioc->name, ii));
+ ioc->name, ii));
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
return -2;
}
-
+
/* Send request via doorbell handshake */
req_as_bytes = (u8 *) req;
for (ii = 0; ii < reqBytes/4; ii++) {
if (ioc->id == iocid) {
*iocpp =ioc;
return iocid;
- }
+ }
}
-
+
*iocpp = NULL;
return -1;
}
if (pci_enable_device(pdev))
return r;
-
+
dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n"));
-
+
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
dprintk((KERN_INFO MYNAM
": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n"));
ioc->alloc_total = sizeof(MPT_ADAPTER);
ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
-
+
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
/* Find lookup slot. */
INIT_LIST_HEAD(&ioc->list);
ioc->id = mpt_ids++;
-
+
mem_phys = msize = 0;
port = psize = 0;
for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
ioc->prod_name = "LSIFC909";
ioc->bus_type = FC;
}
- if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
ioc->prod_name = "LSIFC929";
ioc->bus_type = FC;
}
remove_proc_entry(pname, NULL);
sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
remove_proc_entry(pname, NULL);
-
+
/* call per device driver remove entry point */
for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
if(MptDeviceDriverHandlers[ii] &&
MptDeviceDriverHandlers[ii]->remove(pdev);
}
}
-
+
/* Disable interrupts! */
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
u32 device_state = pdev->current_state;
int recovery_state;
int ii;
-
+
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
ioc->name, pdev, pci_name(pdev), device_state);
if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
break;
}
-
+
if (ii == 5) {
dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts failed rc=%x\n", ioc->name, rc));
} else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
MptDisplayIocCapabilities(ioc);
}
-
+
if (alt_ioc_ready) {
if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
dinitprintk((MYIOC_s_INFO_FMT "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
if (reset_alt_ioc_active && ioc->alt_ioc) {
/* (re)Enable alt-IOC! (reply interrupt) */
- dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
+ dinitprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
ioc->alt_ioc->name));
CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
ioc->alt_ioc->active = 1;
/* Find IM volumes
*/
- if (ioc->facts.MsgVersion >= 0x0102)
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
mpt_findImVolumes(ioc);
/* Check, and possibly reset, the coalescing value
}
if (alt_ioc_ready && MptResetHandlers[ii]) {
- dprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
+ drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
handlers++;
dprintk((MYIOC_s_INFO_FMT "PCI device %s devfn=%x/%x,"
" searching for devfn match on %x or %x\n",
- ioc->name, pci_name(pdev), pdev->devfn,
- func-1, func+1));
+ ioc->name, pci_name(pdev), pdev->bus->number,
+ pdev->devfn, func-1, func+1));
peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
if (!peer) {
static void
mpt_adapter_dispose(MPT_ADAPTER *ioc)
{
- if (ioc != NULL) {
- int sz_first, sz_last;
+ int sz_first, sz_last;
- sz_first = ioc->alloc_total;
+ if (ioc == NULL)
+ return;
- mpt_adapter_disable(ioc);
+ sz_first = ioc->alloc_total;
- if (ioc->pci_irq != -1) {
- free_irq(ioc->pci_irq, ioc);
- ioc->pci_irq = -1;
- }
+ mpt_adapter_disable(ioc);
- if (ioc->memmap != NULL)
- iounmap(ioc->memmap);
+ if (ioc->pci_irq != -1) {
+ free_irq(ioc->pci_irq, ioc);
+ ioc->pci_irq = -1;
+ }
+
+ if (ioc->memmap != NULL) {
+ iounmap(ioc->memmap);
+ ioc->memmap = NULL;
+ }
#if defined(CONFIG_MTRR) && 0
- if (ioc->mtrr_reg > 0) {
- mtrr_del(ioc->mtrr_reg, 0, 0);
- dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
- }
+ if (ioc->mtrr_reg > 0) {
+ mtrr_del(ioc->mtrr_reg, 0, 0);
+ dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
+ }
#endif
- /* Zap the adapter lookup ptr! */
- list_del(&ioc->list);
+ /* Zap the adapter lookup ptr! */
+ list_del(&ioc->list);
- sz_last = ioc->alloc_total;
- dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
- ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
- kfree(ioc);
- }
+ sz_last = ioc->alloc_total;
+ dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
+ ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+ kfree(ioc);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
}
/* Is it already READY? */
- if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+ if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
return 0;
/*
* Hmmm... Did it get left operational?
*/
if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
- dinitprintk((MYIOC_s_WARN_FMT "IOC operational unexpected\n",
+ dinitprintk((MYIOC_s_INFO_FMT "IOC operational unexpected\n",
ioc->name));
/* Check WhoInit.
* Else, fall through to KickStart case
*/
whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
- dprintk((KERN_WARNING MYNAM
- ": whoinit 0x%x\n statefault %d force %d\n",
+ dinitprintk((KERN_INFO MYNAM
+ ": whoinit 0x%x statefault %d force %d\n",
whoinit, statefault, force));
if (whoinit == MPI_WHOINIT_PCI_PEER)
return -4;
get_facts.Function = MPI_FUNCTION_IOC_FACTS;
/* Assert: All other get_facts fields are zero! */
- dinitprintk((MYIOC_s_INFO_FMT
- "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
+ dinitprintk((MYIOC_s_INFO_FMT
+ "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
ioc->name, req_sz, reply_sz));
/* No non-zero fields in the get_facts request are greater than
facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
- status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
+ status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
/* CHECKME! IOCStatus, IOCLogInfo */
facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
if ( sz & 0x02 )
sz += 2;
facts->FWImageSize = sz;
-
+
if (!facts->RequestFrameSize) {
/* Something is wrong! */
printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
ioc->NBShiftFactor = shiftFactor;
dinitprintk((MYIOC_s_INFO_FMT "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
ioc->name, vv, shiftFactor, r));
-
+
if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
/*
* Set values for this IOC's request & reply frame sizes,
return r;
}
} else {
- printk(MYIOC_s_ERR_FMT
+ printk(MYIOC_s_ERR_FMT
"Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
RequestFrameSize)/sizeof(u32)));
dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
ioc->name, &ioc_init));
-
- if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0)
+
+ if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
return r;
+ }
/* YIKES! SUPER IMPORTANT!!!
* Poll IocState until _OPERATIONAL while IOC is doing
state = mpt_GetIocState(ioc, 1);
count++;
}
- dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
+ dinitprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
ioc->name, count));
return r;
int sz;
sz = ioc->facts.FWImageSize;
- dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ dinitprintk((KERN_INFO MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
pci_free_consistent(ioc->pcidev, sz,
ioc->cached_fw, ioc->cached_fw_dma);
mpt_alloc_fw_memory(ioc, sz);
- dinitprintk((KERN_WARNING MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ dinitprintk((KERN_INFO MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
-
+
if (ioc->cached_fw == NULL) {
/* Major Failure.
*/
mpt_add_sge(&request[sgeoffset], flagsLength, ioc->cached_fw_dma);
sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
- dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req @ %p) sgeoffset=%d \n",
+ dinitprintk((KERN_INFO MYNAM ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
prequest, sgeoffset));
DBG_DUMP_FW_REQUEST_FRAME(prequest)
ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
- dinitprintk((KERN_WARNING MYNAM "FW Upload completed rc=%x \n", ii));
+ dinitprintk((KERN_INFO MYNAM ": FW Upload completed rc=%x \n", ii));
cmdStatus = -EFAULT;
if (ii == 0) {
cmdStatus = 0;
}
}
- dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n",
+ dinitprintk((MYIOC_s_INFO_FMT ": do_upload cmdStatus=%d \n",
ioc->name, cmdStatus));
-
+
if (cmdStatus) {
ddlprintk((MYIOC_s_INFO_FMT ": fw upload failed, freeing image \n",
fwSize = (pExtImage->ImageSize + 3) >> 2;
ptrFw = (u32 *)pExtImage;
- ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x bytes @ %p load_addr=%x\n",
- ioc->name, fwSize*4, ptrFw, load_addr));
+ ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
+ ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
while (fwSize--) {
* 0 else
*
* Returns:
- * 1 - hard reset, READY
- * 0 - no reset due to History bit, READY
- * -1 - no reset due to History bit but not READY
+ * 1 - hard reset, READY
+ * 0 - no reset due to History bit, READY
+ * -1 - no reset due to History bit but not READY
* OR reset but failed to come READY
* -2 - no reset, could not enter DIAG mode
* -3 - reset but bad FW bit
*
*/
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
- mdelay (1);
+ mdelay(1);
/*
* Now hit the reset bit in the Diagnostic register
u32 state;
int cntdn, count;
- drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
+ drsprintk((KERN_INFO MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
ioc->name, reset_type));
CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
ioc->reply_frames = (MPT_FRAME_HDR *) mem;
ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
+ dinitprintk((KERN_INFO MYNAM ": %s ReplyBuffers @ %p[%p]\n",
+ ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
+
alloc_dma += reply_sz;
mem += reply_sz;
ioc->req_frames = (MPT_FRAME_HDR *) mem;
ioc->req_frames_dma = alloc_dma;
- dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffers @ %p[%p]\n",
+ dinitprintk((KERN_INFO MYNAM ": %s RequestBuffers @ %p[%p]\n",
ioc->name, mem, (void *)(ulong)alloc_dma));
ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
ioc->ChainBuffer = mem;
ioc->ChainBufferDMA = alloc_dma;
- dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers @ %p(%p)\n",
+ dinitprintk((KERN_INFO MYNAM " :%s ChainBuffers @ %p(%p)\n",
ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
/* Initialize the free chain Q.
*/
static int
mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
- int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
+ int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
{
MPIDefaultReply_t *mptReply;
int failcnt = 0;
*/
if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
failcnt++;
-
+
dhsprintk((MYIOC_s_INFO_FMT "HandShake reply count=%d%s\n",
ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
}
dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
- ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
+ ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
/*
hdr.PageLength = 0;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
hdr.PageLength = 0;
hdr.PageNumber = 1;
hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
hdr.PageLength = 0;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
hdr.PageLength = 0;
hdr.PageNumber = 2;
hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
header.PageLength = 0;
header.PageNumber = 0;
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = portnum;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
ioc->spi_data.minSyncFactor = MPT_ASYNC;
ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
rc = 1;
+ ddvprintk((MYIOC_s_INFO_FMT "Unable to read PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
} else {
/* Save the Port Page 0 data
*/
if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
- dinitprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
+ ddvprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
ioc->name, pPP0->Capabilities));
}
ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
ioc->spi_data.minSyncFactor = (u8) (data >> 8);
+ ddvprintk((MYIOC_s_INFO_FMT "PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
} else {
ioc->spi_data.maxSyncOffset = 0;
ioc->spi_data.minSyncFactor = MPT_ASYNC;
if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
(ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
- if (ioc->spi_data.minSyncFactor < MPT_ULTRA)
+ if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
ioc->spi_data.minSyncFactor = MPT_ULTRA;
+ ddvprintk((MYIOC_s_INFO_FMT "HVD or SE detected, minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
+ }
}
}
if (pbuf) {
header.PageLength = 0;
header.PageNumber = 2;
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = portnum;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
header.PageLength = 0;
header.PageNumber = 1;
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = portnum;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
if (mpt_config(ioc, &cfg) != 0)
return -EFAULT;
- ioc->spi_data.sdp1version = cfg.hdr->PageVersion;
- ioc->spi_data.sdp1length = cfg.hdr->PageLength;
+ ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
+ ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
header.PageVersion = 0;
header.PageLength = 0;
if (mpt_config(ioc, &cfg) != 0)
return -EFAULT;
- ioc->spi_data.sdp0version = cfg.hdr->PageVersion;
- ioc->spi_data.sdp0length = cfg.hdr->PageLength;
+ ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
+ ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
dcprintk((MYIOC_s_INFO_FMT "Headers: 0: version %d length %d\n",
ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
header.PageLength = 0;
header.PageNumber = 2;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
header.PageLength = 0;
header.PageNumber = 3;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
header.PageLength = 0;
header.PageNumber = 4;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
header.PageLength = 0;
header.PageNumber = 1;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
if (evnp == NULL) {
- dprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
+ devtprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
ioc->name));
return 0;
}
memset(evnp, 0, sizeof(*evnp));
- dprintk((MYIOC_s_INFO_FMT "Sending EventNotification(%d)\n", ioc->name, EvSwitch));
+ devtprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
evnp->ChainOffset = 0;
EventAck_t *pAck;
if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK request frame!\n",
- ioc->name);
+ printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK "
+ "request frame for Event=%x EventContext=%x EventData=%x!\n",
+ ioc->name, evnp->Event, le32_to_cpu(evnp->EventContext),
+ le32_to_cpu(evnp->Data[0]));
return -1;
}
memset(pAck, 0, sizeof(*pAck));
mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
{
Config_t *pReq;
+ ConfigExtendedPageHeader_t *pExtHdr = NULL;
MPT_FRAME_HDR *mf;
unsigned long flags;
int ii, rc;
- u32 flagsLength;
+ int flagsLength;
int in_isr;
/* Prevent calling wait_event() (below), if caller happens
pReq->Reserved = 0;
pReq->ChainOffset = 0;
pReq->Function = MPI_FUNCTION_CONFIG;
+
+ /* Assume page type is not extended and clear "reserved" fields. */
pReq->ExtPageLength = 0;
pReq->ExtPageType = 0;
pReq->MsgFlags = 0;
+
for (ii=0; ii < 8; ii++)
pReq->Reserved2[ii] = 0;
- pReq->Header.PageVersion = pCfg->hdr->PageVersion;
- pReq->Header.PageLength = pCfg->hdr->PageLength;
- pReq->Header.PageNumber = pCfg->hdr->PageNumber;
- pReq->Header.PageType = (pCfg->hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+ pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
+ pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
+ pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
+ pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+
+ if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+ pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
+ pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
+ pReq->ExtPageType = pExtHdr->ExtPageType;
+ pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+
+ /* Page Length must be treated as a reserved field for the extended header. */
+ pReq->Header.PageLength = 0;
+ }
+
pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
/* Add a SGE to the config request.
else
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
- flagsLength |= pCfg->hdr->PageLength * 4;
+ if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+ flagsLength |= pExtHdr->ExtPageLength * 4;
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+ dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
+ ioc->name, pReq->ExtPageType, pReq->Header.PageNumber, pReq->Action));
+ }
+ else {
+ flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
+
+ dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
+ ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+ }
- dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
- ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+ mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
/* Append pCfg pointer to end of mf
*/
pReq->Reserved3 = 0;
pReq->NumAddressBytes = 0x01;
pReq->Reserved4 = 0;
- pReq->DataLength = 0x04;
- pdev = (struct pci_dev *) ioc->pcidev;
+ pReq->DataLength = cpu_to_le16(0x04);
+ pdev = ioc->pcidev;
if (pdev->devfn & 1)
pReq->DeviceAddr = 0xB2;
else
* If needed, send (a single) EventAck.
*/
if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
+ devtprintk((MYIOC_s_WARN_FMT
+ "EventAck required\n",ioc->name));
if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
ioc->name, ii));
case 0x00080000:
desc = "Outbound DMA Overrun";
break;
-
+
case 0x00090000:
desc = "Task Management";
break;
case 0x000C0000:
desc = "Untagged Table Size";
break;
-
+
}
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- /* This error is checked in scsi_io_done(). Skip.
+ /* This error is checked in scsi_io_done(). Skip.
desc = "SCSI Data Underrun";
*/
break;
typedef struct _x_config_parms {
struct list_head linkage; /* linked list */
struct timer_list timer; /* timer function for this request */
- ConfigPageHeader_t *hdr;
+ union {
+ ConfigExtendedPageHeader_t *ehdr;
+ ConfigPageHeader_t *hdr;
+ } cfghdr;
dma_addr_t physAddr;
int wait_done; /* wait for this request */
u32 pageAddr; /* properly formatted */
/* Set the command status to GOOD if IOC Status is GOOD
* OR if SCSI I/O cmd and data underrun or recovered error.
*/
- iocStatus = reply->u.reply.IOCStatus & MPI_IOCSTATUS_MASK;
+ iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
if (iocStatus == MPI_IOCSTATUS_SUCCESS)
ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
hdr.PageLength = 0;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
strncpy(karg.serial_number, " ", 24);
if (mpt_config(ioc, &cfg) == 0) {
- if (cfg.hdr->PageLength > 0) {
+ if (cfg.cfghdr.hdr->PageLength > 0) {
/* Issue the second config page request */
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
cfg.dir = 0;
cfg.timeout = 0;
hdr.PageNumber = 3;
hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
cfg.timeout = 0;
cfg.physAddr = -1;
- if ((mpt_config(ioc, &cfg) == 0) && (cfg.hdr->PageLength > 0)) {
+ if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) {
/* Issue the second config page request */
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
- data_sz = (int) cfg.hdr->PageLength * 4;
+ data_sz = (int) cfg.cfghdr.hdr->PageLength * 4;
pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent(
ioc->pcidev, data_sz, &page_dma);
if (pg3_alloc) {
offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
chain_idx = offset / ioc->req_sz;
rc = SUCCESS;
- dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer (index %d), got buf=%p\n",
- ioc->name, *retIndex, chainBuf));
+ dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
+ ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
} else {
rc = FAILED;
chain_idx = MPT_HOST_NO_CHAIN;
- dfailprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
+ dfailprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer failed\n",
ioc->name));
}
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
*/
pReq->ChainOffset = 0;
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
- dsgprintk((MYIOC_s_ERR_FMT
+ dsgprintk((MYIOC_s_INFO_FMT
"Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
ioc->RequestNB[req_idx] = RequestNB;
}
/* NOTE: psge points to the beginning of the chain element
* in current buffer. Get a chain buffer.
*/
- dsgprintk((MYIOC_s_INFO_FMT
- "calling getFreeChainBuffer SCSI cmd=%02x (%p)\n",
- ioc->name, pReq->CDB[0], SCpnt));
- if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED)
+ if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
+ dfailprintk((MYIOC_s_INFO_FMT
+ "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
+ ioc->name, pReq->CDB[0], SCpnt));
return FAILED;
+ }
/* Update the tracking arrays.
* If chainSge == NULL, update ReqToChain, else ChainToChain
return 1;
}
- dmfprintk((MYIOC_s_INFO_FMT
- "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
- ioc->name, mf, mr, sc, req_idx));
-
sc->result = DID_OK << 16; /* Set default reply as OK */
pScsiReq = (SCSIIORequest_t *) mf;
pScsiReply = (SCSIIOReply_t *) mr;
+ if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
+ dmfprintk((MYIOC_s_INFO_FMT
+ "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
+ ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
+ }else{
+ dmfprintk((MYIOC_s_INFO_FMT
+ "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
+ ioc->name, mf, mr, sc, req_idx));
+ }
+
if (pScsiReply == NULL) {
/* special context reply handling */
;
/* Sufficient data transfer occurred */
sc->result = (DID_OK << 16) | scsi_status;
} else if ( xfer_cnt == 0 ) {
- /* A CRC Error causes this condition; retry */
- sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) |
+ /* A CRC Error causes this condition; retry */
+ sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) |
(CHECK_CONDITION << 1);
sc->sense_buffer[0] = 0x70;
sc->sense_buffer[2] = NO_SENSE;
} else {
sc->result = DID_SOFT_ERROR << 16;
}
- dreplyprintk((KERN_NOTICE "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->target));
+ dreplyprintk((KERN_NOTICE
+ "RESIDUAL_MISMATCH: result=%x on id=%d\n",
+ sc->result, sc->device->id));
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
return 1;
}
-
/*
* mptscsih_flush_running_cmds - For each command found, search
* Scsi_Host instance taskQ and reply to OS.
scsi_host_put(host);
mpt_detach(pdev);
-
+
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
MPT_SCSI_HOST *hd;
mpt_resume(pdev);
-
+
if(!host)
return 0;
int size = 0;
if (func) {
- /*
- * write is not supported
+ /*
+ * write is not supported
*/
} else {
if (start)
*/
if (mptscsih_tm_pending_wait(hd) == FAILED) {
if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler abort: "
+ dtmprintk((KERN_INFO MYNAM ": %s: TMHandler abort: "
"Timed out waiting for last TM (%d) to complete! \n",
hd->ioc->name, hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
- dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler target reset: "
+ dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target reset: "
"Timed out waiting for last TM (%d) to complete! \n",
hd->ioc->name, hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
- dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler bus reset: "
+ dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
"Timed out waiting for last TM (%d) to complete! \n",
hd->ioc->name, hd->tmPending));
if (hd->tmPending & (1 << MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS))
if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) {
dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
hd->ioc->name));
- //return FAILED;
- return -999;
+ return FAILED;
}
dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
hd->ioc->name, mf));
pScsiTm->TaskMsgContext = ctx2abort;
- dtmprintk((MYIOC_s_INFO_FMT
- "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
- hd->ioc->name, ctx2abort, type));
+ dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
+ hd->ioc->name, ctx2abort, type));
DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);
/* If we can't locate the host to reset, then we failed. */
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
- dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: "
+ dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
"Can't locate host! (sc=%p)\n",
SCpnt ) );
return FAILED;
}
- printk(KERN_WARNING MYNAM ": %s: >> Attempting host reset! (sc=%p)\n",
+ printk(KERN_WARNING MYNAM ": %s: Attempting host reset! (sc=%p)\n",
hd->ioc->name, SCpnt);
/* If our attempts to reset the host failed, then return a failed
hd->tmState = TM_STATE_NONE;
}
- dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: "
+ dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
"Status = %s\n",
(status == SUCCESS) ? "SUCCESS" : "FAILED" ) );
if (hd->tmState == TM_STATE_NONE) {
hd->tmState = TM_STATE_IN_PROGRESS;
hd->tmPending = 1;
- status = SUCCESS;
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
+ status = SUCCESS;
break;
}
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
if(hd->tmPending == 0) {
status = SUCCESS;
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
+ spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
break;
}
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
if (pTarget == NULL) {
/* Driver doesn't know about this device.
* Kernel may generate a "Dummy Lun 0" which
- * may become a real Lun if a
+ * may become a real Lun if a
* "scsi add-single-device" command is executed
- * while the driver is active (hot-plug a
- * device). LSI Raid controllers need
+ * while the driver is active (hot-plug a
+ * device). LSI Raid controllers need
* queue_depth set to DEV_HIGH for this reason.
*/
scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG,
* If the peripheral qualifier filter is enabled then if the target reports a 0x1
* (i.e. The targer is capable of supporting the specified peripheral device type
* on this logical unit; however, the physical device is not currently connected
- * to this logical unit) it will be converted to a 0x3 (i.e. The target is not
+ * to this logical unit) it will be converted to a 0x3 (i.e. The target is not
* capable of supporting a physical device on this logical unit). This is to work
* around a bug in th emid-layer in some distributions in which the mid-layer will
* continue to try to communicate to the LUN and evntually create a dummy LUN.
/* Get a MF for this command.
*/
if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
- ioc->name));
+ dfailprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
+ ioc->name));
return -EAGAIN;
}
/* Get a MF for this command.
*/
if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
+ dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
ioc->name));
return -EAGAIN;
}
* some type of error occurred.
*/
MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr;
- if (pr->ActionStatus == MPI_RAID_ACTION_ASTATUS_SUCCESS)
+ if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
completionCode = MPT_SCANDV_GOOD;
else
completionCode = MPT_SCANDV_SOME_ERROR;
header1.PageLength = ioc->spi_data.sdp1length;
header1.PageNumber = 1;
header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
"offset=0 negoFlags=%x request=%x config=%x\n",
id, flags, requested, configuration));
- pcfg1Data->RequestedParameters = le32_to_cpu(requested);
+ pcfg1Data->RequestedParameters = cpu_to_le32(requested);
pcfg1Data->Reserved = 0;
- pcfg1Data->Configuration = le32_to_cpu(configuration);
+ pcfg1Data->Configuration = cpu_to_le32(configuration);
cfg.pageAddr = (bus<<8) | id;
mpt_config(hd->ioc, &cfg);
}
/* Prep cfg structure
*/
cfg.pageAddr = (bus<<8) | id;
- cfg.hdr = NULL;
+ cfg.cfghdr.hdr = NULL;
/* Prep SDP0 header
*/
pcfg1Data = (SCSIDevicePage1_t *) (pDvBuf + sz);
cfg1_dma_addr = dvbuf_dma + sz;
- /* Skip this ID? Set cfg.hdr to force config page write
+ /* Skip this ID? Set cfg.cfghdr.hdr to force config page write
*/
{
ScsiCfgData *pspi_data = &hd->ioc->spi_data;
dv.cmd = MPT_SET_MAX;
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
/* Save the final negotiated settings to
* SCSI device page 1.
dv.cmd = MPT_SET_MIN;
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
if ((pbuf1[56] & 0x02) == 0) {
pTarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
- "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
+ ddvprintk((MYIOC_s_NOTE_FMT
+ "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
ioc->name, id, pbuf1[56]));
}
}
u32 sdp0_info;
u32 sdp0_nego;
- cfg.hdr = &header0;
+ cfg.cfghdr.hdr = &header0;
cfg.physAddr = cfg0_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
cfg.dir = 0;
if (!firstPass)
doFallback = 1;
} else {
- ddvprintk((MYIOC_s_NOTE_FMT
+ ddvprintk((MYIOC_s_NOTE_FMT
"DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id));
hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE;
mptscsih_initTarget(hd,
} else if (rc == MPT_SCANDV_ISSUE_SENSE)
doFallback = 1; /* set fallback flag */
- else if ((rc == MPT_SCANDV_DID_RESET) ||
- (rc == MPT_SCANDV_SENSE) ||
+ else if ((rc == MPT_SCANDV_DID_RESET) ||
+ (rc == MPT_SCANDV_SENSE) ||
(rc == MPT_SCANDV_FALLBACK))
doFallback = 1; /* set fallback flag */
else
* 4) release
* 5) update nego parms to target struct
*/
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
/* Set if cfg1_dma_addr contents is valid
*/
- if ((cfg.hdr != NULL) && (retcode == 0)){
+ if ((cfg.cfghdr.hdr != NULL) && (retcode == 0)){
/* If disk, not U320, disable QAS
*/
if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) {
hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
+ ddvprintk((MYIOC_s_NOTE_FMT
"noQas set due to id=%d has factor=%x\n", ioc->name, id, dv.now.factor));
}
* skip save of the final negotiated settings to
* SCSI device page 1.
*
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
/* Update tmax values with those from Device Page 0.*/
pPage0 = (SCSIDevicePage0_t *) pPage;
if (pPage0) {
- val = cpu_to_le32(pPage0->NegotiatedParameters);
+ val = le32_to_cpu(pPage0->NegotiatedParameters);
dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
dv->now.offset, &val, &configuration, dv->now.flags);
dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
- ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x request=%x configuration=%x\n",
+ ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
break;
offset, &val, &configuration, negoFlags);
dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
id, width, factor, offset, negoFlags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
id, width, factor, offset, val, configuration, negoFlags));
if (pPage1) {
mptscsih_setDevicePage1Flags (width, factor, offset, &val,
&configuration, dv->now.flags);
- dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x flags=%x request=%x config=%x\n",
+ dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
id, width, offset, factor, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",
u8 *mem;
int error=0;
int r;
-
+
if ((r = mpt_attach(pdev,id)) != 0)
return r;
-
+
ioc = pci_get_drvdata(pdev);
ioc->DoneCtx = mptspiDoneCtx;
ioc->TaskCtx = mptspiTaskCtx;
ioc->InternalCtx = mptspiInternalCtx;
-
+
/* Added sanity check on readiness of the MPT adapter.
*/
if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
menu "SCSI device support"
+config RAID_ATTRS
+ tristate "RAID Transport Class"
+ default n
+ ---help---
+ Provides RAID
+
config SCSI
tristate "SCSI device support"
---help---
obj-$(CONFIG_SCSI) += scsi_mod.o
+obj-$(CONFIG_RAID_ATTRS) += raid_class.o
+
# --- NOTE ORDERING HERE ---
# For kernel non-modular link, transport attributes need to
# be initialised before drivers
fibsize = sizeof(struct aac_read64) +
((le32_to_cpu(readcmd->sg.count) - 1) *
sizeof (struct sgentry64));
- BUG_ON (fibsize > (sizeof(struct hw_fib) -
+ BUG_ON (fibsize > (dev->max_fib_size -
sizeof(struct aac_fibhdr)));
/*
* Now send the Fib to the adapter
static struct scsi_transport_template *ahd_linux_transport_template = NULL;
-/*
- * Include aiclib.c as part of our
- * "module dependencies are hard" work around.
- */
-#include "aiclib.c"
-
#include <linux/init.h> /* __setup */
#include <linux/mm.h> /* For fetching system memory size */
#include <linux/blkdev.h> /* For block_size() */
struct ahd_linux_device *,
struct scsi_cmnd *);
static void ahd_linux_setup_tag_info_global(char *p);
-static aic_option_callback_t ahd_linux_setup_tag_info;
-static aic_option_callback_t ahd_linux_setup_iocell_info;
static int aic79xx_setup(char *c);
static int ahd_linux_unit;
}
}
+static char *
+ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
+ void (*callback)(u_long, int, int, int32_t),
+ u_long callback_arg)
+{
+ char *tok_end;
+ char *tok_end2;
+ int i;
+ int instance;
+ int targ;
+ int done;
+ char tok_list[] = {'.', ',', '{', '}', '\0'};
+
+ /* All options use a ':' name/arg separator */
+ if (*opt_arg != ':')
+ return (opt_arg);
+ opt_arg++;
+ instance = -1;
+ targ = -1;
+ done = FALSE;
+ /*
+ * Restore separator that may be in
+ * the middle of our option argument.
+ */
+ tok_end = strchr(opt_arg, '\0');
+ if (tok_end < end)
+ *tok_end = ',';
+ while (!done) {
+ switch (*opt_arg) {
+ case '{':
+ if (instance == -1) {
+ instance = 0;
+ } else {
+ if (depth > 1) {
+ if (targ == -1)
+ targ = 0;
+ } else {
+ printf("Malformed Option %s\n",
+ opt_name);
+ done = TRUE;
+ }
+ }
+ opt_arg++;
+ break;
+ case '}':
+ if (targ != -1)
+ targ = -1;
+ else if (instance != -1)
+ instance = -1;
+ opt_arg++;
+ break;
+ case ',':
+ case '.':
+ if (instance == -1)
+ done = TRUE;
+ else if (targ >= 0)
+ targ++;
+ else if (instance >= 0)
+ instance++;
+ opt_arg++;
+ break;
+ case '\0':
+ done = TRUE;
+ break;
+ default:
+ tok_end = end;
+ for (i = 0; tok_list[i]; i++) {
+ tok_end2 = strchr(opt_arg, tok_list[i]);
+ if ((tok_end2) && (tok_end2 < tok_end))
+ tok_end = tok_end2;
+ }
+ callback(callback_arg, instance, targ,
+ simple_strtol(opt_arg, NULL, 0));
+ opt_arg = tok_end;
+ break;
+ }
+ }
+ return (opt_arg);
+}
+
/*
* Handle Linux boot parameters. This routine allows for assigning a value
* to a parameter with a ':' between the parameter and the value.
if (strncmp(p, "global_tag_depth", n) == 0) {
ahd_linux_setup_tag_info_global(p + n);
} else if (strncmp(p, "tag_info", n) == 0) {
- s = aic_parse_brace_option("tag_info", p + n, end,
+ s = ahd_parse_brace_option("tag_info", p + n, end,
2, ahd_linux_setup_tag_info, 0);
} else if (strncmp(p, "slewrate", n) == 0) {
- s = aic_parse_brace_option("slewrate",
+ s = ahd_parse_brace_option("slewrate",
p + n, end, 1, ahd_linux_setup_iocell_info,
AIC79XX_SLEWRATE_INDEX);
} else if (strncmp(p, "precomp", n) == 0) {
- s = aic_parse_brace_option("precomp",
+ s = ahd_parse_brace_option("precomp",
p + n, end, 1, ahd_linux_setup_iocell_info,
AIC79XX_PRECOMP_INDEX);
} else if (strncmp(p, "amplitude", n) == 0) {
- s = aic_parse_brace_option("amplitude",
+ s = ahd_parse_brace_option("amplitude",
p + n, end, 1, ahd_linux_setup_iocell_info,
AIC79XX_AMPLITUDE_INDEX);
} else if (p[n] == ':') {
static int ahd_proc_write_seeprom(struct ahd_softc *ahd,
char *buffer, int length);
+/*
+ * Table of syncrates that don't follow the "divisible by 4"
+ * rule. This table will be expanded in future SCSI specs.
+ */
+static struct {
+ u_int period_factor;
+ u_int period; /* in 100ths of ns */
+} scsi_syncrates[] = {
+ { 0x08, 625 }, /* FAST-160 */
+ { 0x09, 1250 }, /* FAST-80 */
+ { 0x0a, 2500 }, /* FAST-40 40MHz */
+ { 0x0b, 3030 }, /* FAST-40 33MHz */
+ { 0x0c, 5000 } /* FAST-20 */
+};
+
+/*
+ * Return the frequency in kHz corresponding to the given
+ * sync period factor.
+ */
+static u_int
+ahd_calc_syncsrate(u_int period_factor)
+{
+ int i;
+ int num_syncrates;
+
+ num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]);
+ /* See if the period is in the "exception" table */
+ for (i = 0; i < num_syncrates; i++) {
+
+ if (period_factor == scsi_syncrates[i].period_factor) {
+ /* Period in kHz */
+ return (100000000 / scsi_syncrates[i].period);
+ }
+ }
+
+ /*
+ * Wasn't in the table, so use the standard
+ * 4 times conversion.
+ */
+ return (10000000 / (period_factor * 4 * 10));
+}
+
+
static void
copy_mem_info(struct info_str *info, char *data, int len)
{
speed = 3300;
freq = 0;
if (tinfo->offset != 0) {
- freq = aic_calc_syncsrate(tinfo->period);
+ freq = ahd_calc_syncsrate(tinfo->period);
speed = freq;
}
speed *= (0x01 << tinfo->width);
static struct scsi_transport_template *ahc_linux_transport_template = NULL;
-/*
- * Include aiclib.c as part of our
- * "module dependencies are hard" work around.
- */
-#include "aiclib.c"
-
#include <linux/init.h> /* __setup */
#include <linux/mm.h> /* For fetching system memory size */
#include <linux/blkdev.h> /* For block_size() */
struct ahc_linux_device *,
struct scsi_cmnd *);
static void ahc_linux_setup_tag_info_global(char *p);
-static aic_option_callback_t ahc_linux_setup_tag_info;
static int aic7xxx_setup(char *s);
static int ahc_linux_unit;
}
}
+static char *
+ahc_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
+ void (*callback)(u_long, int, int, int32_t),
+ u_long callback_arg)
+{
+ char *tok_end;
+ char *tok_end2;
+ int i;
+ int instance;
+ int targ;
+ int done;
+ char tok_list[] = {'.', ',', '{', '}', '\0'};
+
+ /* All options use a ':' name/arg separator */
+ if (*opt_arg != ':')
+ return (opt_arg);
+ opt_arg++;
+ instance = -1;
+ targ = -1;
+ done = FALSE;
+ /*
+ * Restore separator that may be in
+ * the middle of our option argument.
+ */
+ tok_end = strchr(opt_arg, '\0');
+ if (tok_end < end)
+ *tok_end = ',';
+ while (!done) {
+ switch (*opt_arg) {
+ case '{':
+ if (instance == -1) {
+ instance = 0;
+ } else {
+ if (depth > 1) {
+ if (targ == -1)
+ targ = 0;
+ } else {
+ printf("Malformed Option %s\n",
+ opt_name);
+ done = TRUE;
+ }
+ }
+ opt_arg++;
+ break;
+ case '}':
+ if (targ != -1)
+ targ = -1;
+ else if (instance != -1)
+ instance = -1;
+ opt_arg++;
+ break;
+ case ',':
+ case '.':
+ if (instance == -1)
+ done = TRUE;
+ else if (targ >= 0)
+ targ++;
+ else if (instance >= 0)
+ instance++;
+ opt_arg++;
+ break;
+ case '\0':
+ done = TRUE;
+ break;
+ default:
+ tok_end = end;
+ for (i = 0; tok_list[i]; i++) {
+ tok_end2 = strchr(opt_arg, tok_list[i]);
+ if ((tok_end2) && (tok_end2 < tok_end))
+ tok_end = tok_end2;
+ }
+ callback(callback_arg, instance, targ,
+ simple_strtol(opt_arg, NULL, 0));
+ opt_arg = tok_end;
+ break;
+ }
+ }
+ return (opt_arg);
+}
+
/*
* Handle Linux boot parameters. This routine allows for assigning a value
* to a parameter with a ':' between the parameter and the value.
if (strncmp(p, "global_tag_depth", n) == 0) {
ahc_linux_setup_tag_info_global(p + n);
} else if (strncmp(p, "tag_info", n) == 0) {
- s = aic_parse_brace_option("tag_info", p + n, end,
+ s = ahc_parse_brace_option("tag_info", p + n, end,
2, ahc_linux_setup_tag_info, 0);
} else if (p[n] == ':') {
*(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
static int ahc_proc_write_seeprom(struct ahc_softc *ahc,
char *buffer, int length);
+/*
+ * Table of syncrates that don't follow the "divisible by 4"
+ * rule. This table will be expanded in future SCSI specs.
+ */
+static struct {
+ u_int period_factor;
+ u_int period; /* in 100ths of ns */
+} scsi_syncrates[] = {
+ { 0x08, 625 }, /* FAST-160 */
+ { 0x09, 1250 }, /* FAST-80 */
+ { 0x0a, 2500 }, /* FAST-40 40MHz */
+ { 0x0b, 3030 }, /* FAST-40 33MHz */
+ { 0x0c, 5000 } /* FAST-20 */
+};
+
+/*
+ * Return the frequency in kHz corresponding to the given
+ * sync period factor.
+ */
+static u_int
+ahc_calc_syncsrate(u_int period_factor)
+{
+ int i;
+ int num_syncrates;
+
+ num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]);
+ /* See if the period is in the "exception" table */
+ for (i = 0; i < num_syncrates; i++) {
+
+ if (period_factor == scsi_syncrates[i].period_factor) {
+ /* Period in kHz */
+ return (100000000 / scsi_syncrates[i].period);
+ }
+ }
+
+ /*
+ * Wasn't in the table, so use the standard
+ * 4 times conversion.
+ */
+ return (10000000 / (period_factor * 4 * 10));
+}
+
+
static void
copy_mem_info(struct info_str *info, char *data, int len)
{
speed = 3300;
freq = 0;
if (tinfo->offset != 0) {
- freq = aic_calc_syncsrate(tinfo->period);
+ freq = ahc_calc_syncsrate(tinfo->period);
speed = freq;
}
speed *= (0x01 << tinfo->width);
#include "aiclib.h"
-
-/*
- * Table of syncrates that don't follow the "divisible by 4"
- * rule. This table will be expanded in future SCSI specs.
- */
-static struct {
- u_int period_factor;
- u_int period; /* in 100ths of ns */
-} scsi_syncrates[] = {
- { 0x08, 625 }, /* FAST-160 */
- { 0x09, 1250 }, /* FAST-80 */
- { 0x0a, 2500 }, /* FAST-40 40MHz */
- { 0x0b, 3030 }, /* FAST-40 33MHz */
- { 0x0c, 5000 } /* FAST-20 */
-};
-
-/*
- * Return the frequency in kHz corresponding to the given
- * sync period factor.
- */
-u_int
-aic_calc_syncsrate(u_int period_factor)
-{
- int i;
- int num_syncrates;
-
- num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]);
- /* See if the period is in the "exception" table */
- for (i = 0; i < num_syncrates; i++) {
-
- if (period_factor == scsi_syncrates[i].period_factor) {
- /* Period in kHz */
- return (100000000 / scsi_syncrates[i].period);
- }
- }
-
- /*
- * Wasn't in the table, so use the standard
- * 4 times conversion.
- */
- return (10000000 / (period_factor * 4 * 10));
-}
-
-char *
-aic_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
- aic_option_callback_t *callback, u_long callback_arg)
-{
- char *tok_end;
- char *tok_end2;
- int i;
- int instance;
- int targ;
- int done;
- char tok_list[] = {'.', ',', '{', '}', '\0'};
-
- /* All options use a ':' name/arg separator */
- if (*opt_arg != ':')
- return (opt_arg);
- opt_arg++;
- instance = -1;
- targ = -1;
- done = FALSE;
- /*
- * Restore separator that may be in
- * the middle of our option argument.
- */
- tok_end = strchr(opt_arg, '\0');
- if (tok_end < end)
- *tok_end = ',';
- while (!done) {
- switch (*opt_arg) {
- case '{':
- if (instance == -1) {
- instance = 0;
- } else {
- if (depth > 1) {
- if (targ == -1)
- targ = 0;
- } else {
- printf("Malformed Option %s\n",
- opt_name);
- done = TRUE;
- }
- }
- opt_arg++;
- break;
- case '}':
- if (targ != -1)
- targ = -1;
- else if (instance != -1)
- instance = -1;
- opt_arg++;
- break;
- case ',':
- case '.':
- if (instance == -1)
- done = TRUE;
- else if (targ >= 0)
- targ++;
- else if (instance >= 0)
- instance++;
- opt_arg++;
- break;
- case '\0':
- done = TRUE;
- break;
- default:
- tok_end = end;
- for (i = 0; tok_list[i]; i++) {
- tok_end2 = strchr(opt_arg, tok_list[i]);
- if ((tok_end2) && (tok_end2 < tok_end))
- tok_end = tok_end2;
- }
- callback(callback_arg, instance, targ,
- simple_strtol(opt_arg, NULL, 0));
- opt_arg = tok_end;
- break;
- }
- }
- return (opt_arg);
-}
return (int)capacity;
}
-/**************************** Module Library Hack *****************************/
-/*
- * What we'd like to do is have a single "scsi library" module that both the
- * aic7xxx and aic79xx drivers could load and depend on. A cursory examination
- * of implementing module dependencies in Linux (handling the install and
- * initrd cases) does not look promissing. For now, we just duplicate this
- * code in both drivers using a simple symbol renaming scheme that hides this
- * hack from the drivers.
- */
-#define AIC_LIB_ENTRY_CONCAT(x, prefix) prefix ## x
-#define AIC_LIB_ENTRY_EXPAND(x, prefix) AIC_LIB_ENTRY_CONCAT(x, prefix)
-#define AIC_LIB_ENTRY(x) AIC_LIB_ENTRY_EXPAND(x, AIC_LIB_PREFIX)
-
-#define aic_calc_syncsrate AIC_LIB_ENTRY(_calc_syncrate)
-
-u_int aic_calc_syncsrate(u_int /*period_factor*/);
-
-typedef void aic_option_callback_t(u_long, int, int, int32_t);
-char * aic_parse_brace_option(char *opt_name, char *opt_arg,
- char *end, int depth,
- aic_option_callback_t *, u_long);
-
static __inline uint32_t
scsi_4btoul(uint8_t *bytes)
{
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
+#include <linux/kthread.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/init.h>
struct Scsi_Host *shost = dev_to_shost(dev);
struct device *parent = dev->parent;
- if (shost->ehandler) {
- DECLARE_COMPLETION(sem);
- shost->eh_notify = &sem;
- shost->eh_kill = 1;
- up(shost->eh_wait);
- wait_for_completion(&sem);
- shost->eh_notify = NULL;
- }
-
+ if (shost->ehandler)
+ kthread_stop(shost->ehandler);
if (shost->work_q)
destroy_workqueue(shost->work_q);
{
struct Scsi_Host *shost;
int gfp_mask = GFP_KERNEL, rval;
- DECLARE_COMPLETION(complete);
if (sht->unchecked_isa_dma && privsize)
gfp_mask |= __GFP_DMA;
snprintf(shost->shost_classdev.class_id, BUS_ID_SIZE, "host%d",
shost->host_no);
- shost->eh_notify = &complete;
- rval = kernel_thread(scsi_error_handler, shost, 0);
- if (rval < 0)
+ shost->ehandler = kthread_run(scsi_error_handler, shost,
+ "scsi_eh_%d", shost->host_no);
+ if (IS_ERR(shost->ehandler)) {
+ rval = PTR_ERR(shost->ehandler);
goto fail_destroy_freelist;
- wait_for_completion(&complete);
- shost->eh_notify = NULL;
+ }
scsi_proc_hostdir_add(shost->hostt);
return shost;
static int init_timeout = 5;
static int max_requests = 50;
-#define IBMVSCSI_VERSION "1.5.6"
+#define IBMVSCSI_VERSION "1.5.7"
MODULE_DESCRIPTION("IBM Virtual SCSI");
MODULE_AUTHOR("Dave Boutcher");
sizeof(*evt->xfer_iu) * i;
evt->xfer_iu = pool->iu_storage + i;
evt->hostdata = hostdata;
+ evt->ext_list = NULL;
+ evt->ext_list_token = 0;
}
return 0;
struct ibmvscsi_host_data *hostdata)
{
int i, in_use = 0;
- for (i = 0; i < pool->size; ++i)
+ for (i = 0; i < pool->size; ++i) {
if (atomic_read(&pool->events[i].free) != 1)
++in_use;
+ if (pool->events[i].ext_list) {
+ dma_free_coherent(hostdata->dev,
+ SG_ALL * sizeof(struct memory_descriptor),
+ pool->events[i].ext_list,
+ pool->events[i].ext_list_token);
+ }
+ }
if (in_use)
printk(KERN_WARNING
"ibmvscsi: releasing event pool with %d "
} else {
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
srp_cmd->data_out_format = SRP_INDIRECT_BUFFER;
- srp_cmd->data_out_count = numbuf;
+ srp_cmd->data_out_count =
+ numbuf < MAX_INDIRECT_BUFS ?
+ numbuf: MAX_INDIRECT_BUFS;
} else {
srp_cmd->data_in_format = SRP_INDIRECT_BUFFER;
- srp_cmd->data_in_count = numbuf;
+ srp_cmd->data_in_count =
+ numbuf < MAX_INDIRECT_BUFS ?
+ numbuf: MAX_INDIRECT_BUFS;
}
}
}
+static void unmap_sg_list(int num_entries,
+ struct device *dev,
+ struct memory_descriptor *md)
+{
+ int i;
+
+ for (i = 0; i < num_entries; ++i) {
+ dma_unmap_single(dev,
+ md[i].virtual_address,
+ md[i].length, DMA_BIDIRECTIONAL);
+ }
+}
+
/**
* unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
* @cmd: srp_cmd whose additional_data member will be unmapped
* @dev: device for which the memory is mapped
*
*/
-static void unmap_cmd_data(struct srp_cmd *cmd, struct device *dev)
+static void unmap_cmd_data(struct srp_cmd *cmd,
+ struct srp_event_struct *evt_struct,
+ struct device *dev)
{
- int i;
-
if ((cmd->data_out_format == SRP_NO_BUFFER) &&
(cmd->data_in_format == SRP_NO_BUFFER))
return;
(struct indirect_descriptor *)cmd->additional_data;
int num_mapped = indirect->head.length /
sizeof(indirect->list[0]);
- for (i = 0; i < num_mapped; ++i) {
- struct memory_descriptor *data = &indirect->list[i];
- dma_unmap_single(dev,
- data->virtual_address,
- data->length, DMA_BIDIRECTIONAL);
+
+ if (num_mapped <= MAX_INDIRECT_BUFS) {
+ unmap_sg_list(num_mapped, dev, &indirect->list[0]);
+ return;
}
+
+ unmap_sg_list(num_mapped, dev, evt_struct->ext_list);
}
}
+static int map_sg_list(int num_entries,
+ struct scatterlist *sg,
+ struct memory_descriptor *md)
+{
+ int i;
+ u64 total_length = 0;
+
+ for (i = 0; i < num_entries; ++i) {
+ struct memory_descriptor *descr = md + i;
+ struct scatterlist *sg_entry = &sg[i];
+ descr->virtual_address = sg_dma_address(sg_entry);
+ descr->length = sg_dma_len(sg_entry);
+ descr->memory_handle = 0;
+ total_length += sg_dma_len(sg_entry);
+ }
+ return total_length;
+}
+
/**
* map_sg_data: - Maps dma for a scatterlist and initializes decriptor fields
* @cmd: Scsi_Cmnd with the scatterlist
* Returns 1 on success.
*/
static int map_sg_data(struct scsi_cmnd *cmd,
+ struct srp_event_struct *evt_struct,
struct srp_cmd *srp_cmd, struct device *dev)
{
- int i, sg_mapped;
+ int sg_mapped;
u64 total_length = 0;
struct scatterlist *sg = cmd->request_buffer;
struct memory_descriptor *data =
return 1;
}
- if (sg_mapped > MAX_INDIRECT_BUFS) {
+ if (sg_mapped > SG_ALL) {
printk(KERN_ERR
"ibmvscsi: More than %d mapped sg entries, got %d\n",
- MAX_INDIRECT_BUFS, sg_mapped);
+ SG_ALL, sg_mapped);
return 0;
}
indirect->head.virtual_address = 0;
indirect->head.length = sg_mapped * sizeof(indirect->list[0]);
indirect->head.memory_handle = 0;
- for (i = 0; i < sg_mapped; ++i) {
- struct memory_descriptor *descr = &indirect->list[i];
- struct scatterlist *sg_entry = &sg[i];
- descr->virtual_address = sg_dma_address(sg_entry);
- descr->length = sg_dma_len(sg_entry);
- descr->memory_handle = 0;
- total_length += sg_dma_len(sg_entry);
+
+ if (sg_mapped <= MAX_INDIRECT_BUFS) {
+ total_length = map_sg_list(sg_mapped, sg, &indirect->list[0]);
+ indirect->total_length = total_length;
+ return 1;
}
- indirect->total_length = total_length;
- return 1;
+ /* get indirect table */
+ if (!evt_struct->ext_list) {
+ evt_struct->ext_list =(struct memory_descriptor*)
+ dma_alloc_coherent(dev,
+ SG_ALL * sizeof(struct memory_descriptor),
+ &evt_struct->ext_list_token, 0);
+ if (!evt_struct->ext_list) {
+ printk(KERN_ERR
+ "ibmvscsi: Can't allocate memory for indirect table\n");
+ return 0;
+
+ }
+ }
+
+ total_length = map_sg_list(sg_mapped, sg, evt_struct->ext_list);
+
+ indirect->total_length = total_length;
+ indirect->head.virtual_address = evt_struct->ext_list_token;
+ indirect->head.length = sg_mapped * sizeof(indirect->list[0]);
+ memcpy(indirect->list, evt_struct->ext_list,
+ MAX_INDIRECT_BUFS * sizeof(struct memory_descriptor));
+
+ return 1;
}
/**
* Returns 1 on success.
*/
static int map_data_for_srp_cmd(struct scsi_cmnd *cmd,
+ struct srp_event_struct *evt_struct,
struct srp_cmd *srp_cmd, struct device *dev)
{
switch (cmd->sc_data_direction) {
if (!cmd->request_buffer)
return 1;
if (cmd->use_sg)
- return map_sg_data(cmd, srp_cmd, dev);
+ return map_sg_data(cmd, evt_struct, srp_cmd, dev);
return map_single_data(cmd, srp_cmd, dev);
}
printk(KERN_WARNING
"ibmvscsi: Warning, request_limit exceeded\n");
unmap_cmd_data(&evt_struct->iu.srp.cmd,
+ evt_struct,
hostdata->dev);
free_event_struct(&hostdata->pool, evt_struct);
return SCSI_MLQUEUE_HOST_BUSY;
return 0;
send_error:
- unmap_cmd_data(&evt_struct->iu.srp.cmd, hostdata->dev);
+ unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
if ((cmnd = evt_struct->cmnd) != NULL) {
cmnd->result = DID_ERROR << 16;
rsp->sense_and_response_data,
rsp->sense_data_list_length);
unmap_cmd_data(&evt_struct->iu.srp.cmd,
+ evt_struct,
evt_struct->hostdata->dev);
if (rsp->doover)
{
struct srp_cmd *srp_cmd;
struct srp_event_struct *evt_struct;
+ struct indirect_descriptor *indirect;
struct ibmvscsi_host_data *hostdata =
(struct ibmvscsi_host_data *)&cmnd->device->host->hostdata;
u16 lun = lun_from_dev(cmnd->device);
if (!evt_struct)
return SCSI_MLQUEUE_HOST_BUSY;
- init_event_struct(evt_struct,
- handle_cmd_rsp,
- VIOSRP_SRP_FORMAT,
- cmnd->timeout_per_command/HZ);
-
- evt_struct->cmnd = cmnd;
- evt_struct->cmnd_done = done;
-
/* Set up the actual SRP IU */
srp_cmd = &evt_struct->iu.srp.cmd;
memset(srp_cmd, 0x00, sizeof(*srp_cmd));
memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(cmnd->cmnd));
srp_cmd->lun = ((u64) lun) << 48;
- if (!map_data_for_srp_cmd(cmnd, srp_cmd, hostdata->dev)) {
+ if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
printk(KERN_ERR "ibmvscsi: couldn't convert cmd to srp_cmd\n");
free_event_struct(&hostdata->pool, evt_struct);
return SCSI_MLQUEUE_HOST_BUSY;
}
+ init_event_struct(evt_struct,
+ handle_cmd_rsp,
+ VIOSRP_SRP_FORMAT,
+ cmnd->timeout_per_command/HZ);
+
+ evt_struct->cmnd = cmnd;
+ evt_struct->cmnd_done = done;
+
/* Fix up dma address of the buffer itself */
- if ((srp_cmd->data_out_format == SRP_INDIRECT_BUFFER) ||
- (srp_cmd->data_in_format == SRP_INDIRECT_BUFFER)) {
- struct indirect_descriptor *indirect =
- (struct indirect_descriptor *)srp_cmd->additional_data;
+ indirect = (struct indirect_descriptor *)srp_cmd->additional_data;
+ if (((srp_cmd->data_out_format == SRP_INDIRECT_BUFFER) ||
+ (srp_cmd->data_in_format == SRP_INDIRECT_BUFFER)) &&
+ (indirect->head.virtual_address == 0)) {
indirect->head.virtual_address = evt_struct->crq.IU_data_ptr +
offsetof(struct srp_cmd, additional_data) +
offsetof(struct indirect_descriptor, list);
cmd->result = (DID_ABORT << 16);
list_del(&found_evt->list);
- unmap_cmd_data(&found_evt->iu.srp.cmd, found_evt->hostdata->dev);
+ unmap_cmd_data(&found_evt->iu.srp.cmd, found_evt,
+ found_evt->hostdata->dev);
free_event_struct(&found_evt->hostdata->pool, found_evt);
spin_unlock_irqrestore(hostdata->host->host_lock, flags);
atomic_inc(&hostdata->request_limit);
if (tmp_evt->cmnd)
tmp_evt->cmnd->result = (DID_RESET << 16);
list_del(&tmp_evt->list);
- unmap_cmd_data(&tmp_evt->iu.srp.cmd, tmp_evt->hostdata->dev);
+ unmap_cmd_data(&tmp_evt->iu.srp.cmd, tmp_evt,
+ tmp_evt->hostdata->dev);
free_event_struct(&tmp_evt->hostdata->pool,
tmp_evt);
atomic_inc(&hostdata->request_limit);
if (tmp_evt->cmnd) {
tmp_evt->cmnd->result = (DID_ERROR << 16);
unmap_cmd_data(&tmp_evt->iu.srp.cmd,
+ tmp_evt,
tmp_evt->hostdata->dev);
if (tmp_evt->cmnd_done)
tmp_evt->cmnd_done(tmp_evt->cmnd);
.cmd_per_lun = 16,
.can_queue = 1, /* Updated after SRP_LOGIN */
.this_id = -1,
- .sg_tablesize = MAX_INDIRECT_BUFS,
+ .sg_tablesize = SG_ALL,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ibmvscsi_attrs,
};
void (*cmnd_done) (struct scsi_cmnd *);
struct completion comp;
union viosrp_iu *sync_srp;
+ struct memory_descriptor *ext_list;
+ dma_addr_t ext_list_token;
};
/* a pool of event structs for use */
sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr);
}
+/* Scsi_Host attributes. */
+
+static ssize_t
+qla2x00_drvr_version_show(struct class_device *cdev, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", qla2x00_version_str);
+}
+
+static ssize_t
+qla2x00_fw_version_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ char fw_str[30];
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ha->isp_ops.fw_version_str(ha, fw_str));
+}
+
+static ssize_t
+qla2x00_serial_num_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ uint32_t sn;
+
+ sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | ha->serial1;
+ return snprintf(buf, PAGE_SIZE, "%c%05d\n", 'A' + sn / 100000,
+ sn % 100000);
+}
+
+static ssize_t
+qla2x00_isp_name_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ return snprintf(buf, PAGE_SIZE, "%s\n", ha->brd_info->isp_name);
+}
+
+static ssize_t
+qla2x00_isp_id_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ return snprintf(buf, PAGE_SIZE, "%04x %04x %04x %04x\n",
+ ha->product_id[0], ha->product_id[1], ha->product_id[2],
+ ha->product_id[3]);
+}
+
+static ssize_t
+qla2x00_model_name_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ return snprintf(buf, PAGE_SIZE, "%s\n", ha->model_number);
+}
+
+static ssize_t
+qla2x00_model_desc_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ha->model_desc ? ha->model_desc: "");
+}
+
+static ssize_t
+qla2x00_pci_info_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ char pci_info[30];
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ha->isp_ops.pci_info_str(ha, pci_info));
+}
+
+static ssize_t
+qla2x00_state_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ int len = 0;
+
+ if (atomic_read(&ha->loop_state) == LOOP_DOWN ||
+ atomic_read(&ha->loop_state) == LOOP_DEAD)
+ len = snprintf(buf, PAGE_SIZE, "Link Down\n");
+ else if (atomic_read(&ha->loop_state) != LOOP_READY ||
+ test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
+ test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags))
+ len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
+ else {
+ len = snprintf(buf, PAGE_SIZE, "Link Up - ");
+
+ switch (ha->current_topology) {
+ case ISP_CFG_NL:
+ len += snprintf(buf + len, PAGE_SIZE-len, "Loop\n");
+ break;
+ case ISP_CFG_FL:
+ len += snprintf(buf + len, PAGE_SIZE-len, "FL_Port\n");
+ break;
+ case ISP_CFG_N:
+ len += snprintf(buf + len, PAGE_SIZE-len,
+ "N_Port to N_Port\n");
+ break;
+ case ISP_CFG_F:
+ len += snprintf(buf + len, PAGE_SIZE-len, "F_Port\n");
+ break;
+ default:
+ len += snprintf(buf + len, PAGE_SIZE-len, "Loop\n");
+ break;
+ }
+ }
+ return len;
+}
+
+static CLASS_DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show,
+ NULL);
+static CLASS_DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
+static CLASS_DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
+static CLASS_DEVICE_ATTR(isp_name, S_IRUGO, qla2x00_isp_name_show, NULL);
+static CLASS_DEVICE_ATTR(isp_id, S_IRUGO, qla2x00_isp_id_show, NULL);
+static CLASS_DEVICE_ATTR(model_name, S_IRUGO, qla2x00_model_name_show, NULL);
+static CLASS_DEVICE_ATTR(model_desc, S_IRUGO, qla2x00_model_desc_show, NULL);
+static CLASS_DEVICE_ATTR(pci_info, S_IRUGO, qla2x00_pci_info_show, NULL);
+static CLASS_DEVICE_ATTR(state, S_IRUGO, qla2x00_state_show, NULL);
+
+struct class_device_attribute *qla2x00_host_attrs[] = {
+ &class_device_attr_driver_version,
+ &class_device_attr_fw_version,
+ &class_device_attr_serial_num,
+ &class_device_attr_isp_name,
+ &class_device_attr_isp_id,
+ &class_device_attr_model_name,
+ &class_device_attr_model_desc,
+ &class_device_attr_pci_info,
+ &class_device_attr_state,
+ NULL,
+};
+
/* Host attributes. */
static void
.show_host_node_name = 1,
.show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+
.get_host_port_id = qla2x00_get_host_port_id,
.show_host_port_id = 1,
.dd_fcrport_size = sizeof(struct fc_port *),
+ .show_rport_supported_classes = 1,
.get_starget_node_name = qla2x00_get_starget_node_name,
.show_starget_node_name = 1,
be64_to_cpu(*(uint64_t *)ha->init_cb->node_name);
fc_host_port_name(ha->host) =
be64_to_cpu(*(uint64_t *)ha->init_cb->port_name);
+ fc_host_supported_classes(ha->host) = FC_COS_CLASS3;
}
#define DEBUG2_3_11(x) do {x;} while (0);
#define DEBUG2_9_10(x) do {x;} while (0);
#define DEBUG2_11(x) do {x;} while (0);
+#define DEBUG2_13(x) do {x;} while (0);
#else
#define DEBUG2(x) do {} while (0);
#endif
#if defined(QL_DEBUG_LEVEL_13)
#define DEBUG13(x) do {x;} while (0)
+#if !defined(DEBUG2_13)
+#define DEBUG2_13(x) do {x;} while(0)
+#endif
#else
#define DEBUG13(x) do {} while (0)
+#if !defined(QL_DEBUG_LEVEL_2)
+#define DEBUG2_13(x) do {} while(0)
+#endif
#endif
#if defined(QL_DEBUG_LEVEL_14)
* valid range of an N-PORT id is 0 through 0x7ef.
*/
#define NPH_LAST_HANDLE 0x7ef
+#define NPH_MGMT_SERVER 0x7fa /* FFFFFA */
#define NPH_SNS 0x7fc /* FFFFFC */
#define NPH_FABRIC_CONTROLLER 0x7fd /* FFFFFD */
#define NPH_F_PORT 0x7fe /* FFFFFE */
#define MBC_WRITE_RAM_WORD_EXTENDED 0xd /* Write RAM word extended */
#define MBC_READ_RAM_EXTENDED 0xf /* Read RAM extended. */
#define MBC_IOCB_COMMAND 0x12 /* Execute IOCB command. */
+#define MBC_STOP_FIRMWARE 0x14 /* Stop firmware. */
#define MBC_ABORT_COMMAND 0x15 /* Abort IOCB command. */
#define MBC_ABORT_DEVICE 0x16 /* Abort device (ID/LUN). */
#define MBC_ABORT_TARGET 0x17 /* Abort target (ID). */
* MSB BIT 1 =
* MSB BIT 2 =
* MSB BIT 3 =
- * MSB BIT 4 =
+ * MSB BIT 4 = LED mode
* MSB BIT 5 = enable 50 ohm termination
* MSB BIT 6 = Data Rate (2300 only)
* MSB BIT 7 = Data Rate (2300 only)
* MSB BIT 1 =
* MSB BIT 2 =
* MSB BIT 3 =
- * MSB BIT 4 =
+ * MSB BIT 4 = LED mode
* MSB BIT 5 = enable 50 ohm termination
* MSB BIT 6 = Data Rate (2300 only)
* MSB BIT 7 = Data Rate (2300 only)
uint8_t link_down_timeout;
- uint8_t adapter_id_0[4];
- uint8_t adapter_id_1[4];
- uint8_t adapter_id_2[4];
- uint8_t adapter_id_3[4];
+ uint8_t adapter_id[16];
uint8_t alt1_boot_node_name[WWN_SIZE];
uint16_t alt1_boot_lun_number;
uint8_t cur_path; /* current path id */
struct fc_rport *rport;
+ u32 supported_classes;
} fc_port_t;
/*
#define CT_REJECT_RESPONSE 0x8001
#define CT_ACCEPT_RESPONSE 0x8002
+#define CT_REASON_CANNOT_PERFORM 0x09
+#define CT_EXPL_ALREADY_REGISTERED 0x10
#define NS_N_PORT_TYPE 0x01
#define NS_NL_PORT_TYPE 0x02
#define RSNN_NN_REQ_SIZE (16 + 8 + 1 + 255)
#define RSNN_NN_RSP_SIZE 16
+/*
+ * HBA attribute types.
+ */
+#define FDMI_HBA_ATTR_COUNT 9
+#define FDMI_HBA_NODE_NAME 1
+#define FDMI_HBA_MANUFACTURER 2
+#define FDMI_HBA_SERIAL_NUMBER 3
+#define FDMI_HBA_MODEL 4
+#define FDMI_HBA_MODEL_DESCRIPTION 5
+#define FDMI_HBA_HARDWARE_VERSION 6
+#define FDMI_HBA_DRIVER_VERSION 7
+#define FDMI_HBA_OPTION_ROM_VERSION 8
+#define FDMI_HBA_FIRMWARE_VERSION 9
+#define FDMI_HBA_OS_NAME_AND_VERSION 0xa
+#define FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH 0xb
+
+struct ct_fdmi_hba_attr {
+ uint16_t type;
+ uint16_t len;
+ union {
+ uint8_t node_name[WWN_SIZE];
+ uint8_t manufacturer[32];
+ uint8_t serial_num[8];
+ uint8_t model[16];
+ uint8_t model_desc[80];
+ uint8_t hw_version[16];
+ uint8_t driver_version[32];
+ uint8_t orom_version[16];
+ uint8_t fw_version[16];
+ uint8_t os_version[128];
+ uint8_t max_ct_len[4];
+ } a;
+};
+
+struct ct_fdmi_hba_attributes {
+ uint32_t count;
+ struct ct_fdmi_hba_attr entry[FDMI_HBA_ATTR_COUNT];
+};
+
+/*
+ * Port attribute types.
+ */
+#define FDMI_PORT_ATTR_COUNT 5
+#define FDMI_PORT_FC4_TYPES 1
+#define FDMI_PORT_SUPPORT_SPEED 2
+#define FDMI_PORT_CURRENT_SPEED 3
+#define FDMI_PORT_MAX_FRAME_SIZE 4
+#define FDMI_PORT_OS_DEVICE_NAME 5
+#define FDMI_PORT_HOST_NAME 6
+
+struct ct_fdmi_port_attr {
+ uint16_t type;
+ uint16_t len;
+ union {
+ uint8_t fc4_types[32];
+ uint32_t sup_speed;
+ uint32_t cur_speed;
+ uint32_t max_frame_size;
+ uint8_t os_dev_name[32];
+ uint8_t host_name[32];
+ } a;
+};
+
+/*
+ * Port Attribute Block.
+ */
+struct ct_fdmi_port_attributes {
+ uint32_t count;
+ struct ct_fdmi_port_attr entry[FDMI_PORT_ATTR_COUNT];
+};
+
+/* FDMI definitions. */
+#define GRHL_CMD 0x100
+#define GHAT_CMD 0x101
+#define GRPL_CMD 0x102
+#define GPAT_CMD 0x110
+
+#define RHBA_CMD 0x200
+#define RHBA_RSP_SIZE 16
+
+#define RHAT_CMD 0x201
+#define RPRT_CMD 0x210
+
+#define RPA_CMD 0x211
+#define RPA_RSP_SIZE 16
+
+#define DHBA_CMD 0x300
+#define DHBA_REQ_SIZE (16 + 8)
+#define DHBA_RSP_SIZE 16
+
+#define DHAT_CMD 0x301
+#define DPRT_CMD 0x310
+#define DPA_CMD 0x311
+
/* CT command header -- request/response common fields */
struct ct_cmd_hdr {
uint8_t revision;
uint8_t name_len;
uint8_t sym_node_name[255];
} rsnn_nn;
+
+ struct {
+ uint8_t hba_indentifier[8];
+ } ghat;
+
+ struct {
+ uint8_t hba_identifier[8];
+ uint32_t entry_count;
+ uint8_t port_name[8];
+ struct ct_fdmi_hba_attributes attrs;
+ } rhba;
+
+ struct {
+ uint8_t hba_identifier[8];
+ struct ct_fdmi_hba_attributes attrs;
+ } rhat;
+
+ struct {
+ uint8_t port_name[8];
+ struct ct_fdmi_port_attributes attrs;
+ } rpa;
+
+ struct {
+ uint8_t port_name[8];
+ } dhba;
+
+ struct {
+ uint8_t port_name[8];
+ } dhat;
+
+ struct {
+ uint8_t port_name[8];
+ } dprt;
+
+ struct {
+ uint8_t port_name[8];
+ } dpa;
} req;
};
struct {
uint8_t fc4_types[32];
} gft_id;
+
+ struct {
+ uint32_t entry_count;
+ uint8_t port_name[8];
+ struct ct_fdmi_hba_attributes attrs;
+ } ghat;
} rsp;
};
uint16_t (*calc_req_entries) (uint16_t);
void (*build_iocbs) (srb_t *, cmd_entry_t *, uint16_t);
void * (*prep_ms_iocb) (struct scsi_qla_host *, uint32_t, uint32_t);
+ void * (*prep_ms_fdmi_iocb) (struct scsi_qla_host *, uint32_t,
+ uint32_t);
uint8_t * (*read_nvram) (struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
#define IOCTL_ERROR_RECOVERY 23
#define LOOP_RESET_NEEDED 24
#define BEACON_BLINK_NEEDED 25
+#define REGISTER_FDMI_NEEDED 26
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0
int port_down_retry_count;
uint8_t mbx_count;
uint16_t last_loop_id;
+ uint16_t mgmt_svr_loop_id;
uint32_t login_retry_count;
uint8_t model_number[16+1];
#define BINZERO "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
char *model_desc;
+ uint8_t adapter_id[16+1];
uint8_t *node_name;
uint8_t *port_name;
#define QLA_SUSPENDED 0x106
#define QLA_BUSY 0x107
#define QLA_RSCNS_HANDLED 0x108
+#define QLA_ALREADY_REGISTERED 0x109
/*
* Stat info for all adpaters
extern int ql2xenablezio;
extern int ql2xintrdelaytimer;
extern int ql2xloginretrycount;
+extern int ql2xfdmienable;
extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
qla2x00_abort_target(fc_port_t *);
#endif
-extern int
-qla2x00_target_reset(scsi_qla_host_t *, struct fc_port *);
-
extern int
qla2x00_get_adapter_id(scsi_qla_host_t *, uint16_t *, uint8_t *, uint8_t *,
uint8_t *, uint16_t *);
extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
+extern int
+qla2x00_stop_firmware(scsi_qla_host_t *);
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
extern int qla2x00_rff_id(scsi_qla_host_t *);
extern int qla2x00_rnn_id(scsi_qla_host_t *);
extern int qla2x00_rsnn_nn(scsi_qla_host_t *);
+extern void *qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
+extern void *qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
+extern int qla2x00_fdmi_register(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_rscn.c source file.
/*
* Global Function Prototypes in qla_attr.c source file.
*/
+struct class_device_attribute;
+extern struct class_device_attribute *qla2x00_host_attrs[];
struct fc_function_template;
extern struct fc_function_template qla2xxx_transport_functions;
extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
return (rval);
}
+
+/**
+ * qla2x00_mgmt_svr_login() - Login to fabric Managment Service.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+static int
+qla2x00_mgmt_svr_login(scsi_qla_host_t *ha)
+{
+ int ret;
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+
+ ret = QLA_SUCCESS;
+ if (ha->flags.management_server_logged_in)
+ return ret;
+
+ ha->isp_ops.fabric_login(ha, ha->mgmt_svr_loop_id, 0xff, 0xff, 0xfa,
+ mb, BIT_1);
+ if (mb[0] != MBS_COMMAND_COMPLETE) {
+ DEBUG2_13(printk("%s(%ld): Failed MANAGEMENT_SERVER login: "
+ "loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x\n",
+ __func__, ha->host_no, ha->mgmt_svr_loop_id, mb[0], mb[1],
+ mb[2], mb[6], mb[7]));
+ ret = QLA_FUNCTION_FAILED;
+ } else
+ ha->flags.management_server_logged_in = 1;
+
+ return ret;
+}
+
+/**
+ * qla2x00_prep_ms_fdmi_iocb() - Prepare common MS IOCB fields for FDMI query.
+ * @ha: HA context
+ * @req_size: request size in bytes
+ * @rsp_size: response size in bytes
+ *
+ * Returns a pointer to the @ha's ms_iocb.
+ */
+void *
+qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *ha, uint32_t req_size,
+ uint32_t rsp_size)
+{
+ ms_iocb_entry_t *ms_pkt;
+
+ ms_pkt = ha->ms_iocb;
+ memset(ms_pkt, 0, sizeof(ms_iocb_entry_t));
+
+ ms_pkt->entry_type = MS_IOCB_TYPE;
+ ms_pkt->entry_count = 1;
+ SET_TARGET_ID(ha, ms_pkt->loop_id, ha->mgmt_svr_loop_id);
+ ms_pkt->control_flags = __constant_cpu_to_le16(CF_READ | CF_HEAD_TAG);
+ ms_pkt->timeout = __constant_cpu_to_le16(59);
+ ms_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
+ ms_pkt->total_dsd_count = __constant_cpu_to_le16(2);
+ ms_pkt->rsp_bytecount = cpu_to_le32(rsp_size);
+ ms_pkt->req_bytecount = cpu_to_le32(req_size);
+
+ ms_pkt->dseg_req_address[0] = cpu_to_le32(LSD(ha->ct_sns_dma));
+ ms_pkt->dseg_req_address[1] = cpu_to_le32(MSD(ha->ct_sns_dma));
+ ms_pkt->dseg_req_length = ms_pkt->req_bytecount;
+
+ ms_pkt->dseg_rsp_address[0] = cpu_to_le32(LSD(ha->ct_sns_dma));
+ ms_pkt->dseg_rsp_address[1] = cpu_to_le32(MSD(ha->ct_sns_dma));
+ ms_pkt->dseg_rsp_length = ms_pkt->rsp_bytecount;
+
+ return ms_pkt;
+}
+
+/**
+ * qla24xx_prep_ms_fdmi_iocb() - Prepare common MS IOCB fields for FDMI query.
+ * @ha: HA context
+ * @req_size: request size in bytes
+ * @rsp_size: response size in bytes
+ *
+ * Returns a pointer to the @ha's ms_iocb.
+ */
+void *
+qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *ha, uint32_t req_size,
+ uint32_t rsp_size)
+{
+ struct ct_entry_24xx *ct_pkt;
+
+ ct_pkt = (struct ct_entry_24xx *)ha->ms_iocb;
+ memset(ct_pkt, 0, sizeof(struct ct_entry_24xx));
+
+ ct_pkt->entry_type = CT_IOCB_TYPE;
+ ct_pkt->entry_count = 1;
+ ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id);
+ ct_pkt->timeout = __constant_cpu_to_le16(59);
+ ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
+ ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
+ ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
+ ct_pkt->cmd_byte_count = cpu_to_le32(req_size);
+
+ ct_pkt->dseg_0_address[0] = cpu_to_le32(LSD(ha->ct_sns_dma));
+ ct_pkt->dseg_0_address[1] = cpu_to_le32(MSD(ha->ct_sns_dma));
+ ct_pkt->dseg_0_len = ct_pkt->cmd_byte_count;
+
+ ct_pkt->dseg_1_address[0] = cpu_to_le32(LSD(ha->ct_sns_dma));
+ ct_pkt->dseg_1_address[1] = cpu_to_le32(MSD(ha->ct_sns_dma));
+ ct_pkt->dseg_1_len = ct_pkt->rsp_byte_count;
+
+ return ct_pkt;
+}
+
+static inline ms_iocb_entry_t *
+qla2x00_update_ms_fdmi_iocb(scsi_qla_host_t *ha, uint32_t req_size)
+{
+ ms_iocb_entry_t *ms_pkt = ha->ms_iocb;
+ struct ct_entry_24xx *ct_pkt = (struct ct_entry_24xx *)ha->ms_iocb;
+
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ ct_pkt->cmd_byte_count = cpu_to_le32(req_size);
+ ct_pkt->dseg_0_len = ct_pkt->cmd_byte_count;
+ } else {
+ ms_pkt->req_bytecount = cpu_to_le32(req_size);
+ ms_pkt->dseg_req_length = ms_pkt->req_bytecount;
+ }
+
+ return ms_pkt;
+}
+
+/**
+ * qla2x00_prep_ct_req() - Prepare common CT request fields for SNS query.
+ * @ct_req: CT request buffer
+ * @cmd: GS command
+ * @rsp_size: response size in bytes
+ *
+ * Returns a pointer to the intitialized @ct_req.
+ */
+static inline struct ct_sns_req *
+qla2x00_prep_ct_fdmi_req(struct ct_sns_req *ct_req, uint16_t cmd,
+ uint16_t rsp_size)
+{
+ memset(ct_req, 0, sizeof(struct ct_sns_pkt));
+
+ ct_req->header.revision = 0x01;
+ ct_req->header.gs_type = 0xFA;
+ ct_req->header.gs_subtype = 0x10;
+ ct_req->command = cpu_to_be16(cmd);
+ ct_req->max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
+
+ return ct_req;
+}
+
+/**
+ * qla2x00_fdmi_rhba() -
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+static int
+qla2x00_fdmi_rhba(scsi_qla_host_t *ha)
+{
+ int rval, alen;
+ uint32_t size, sn;
+
+ ms_iocb_entry_t *ms_pkt;
+ struct ct_sns_req *ct_req;
+ struct ct_sns_rsp *ct_rsp;
+ uint8_t *entries;
+ struct ct_fdmi_hba_attr *eiter;
+
+ /* Issue RHBA */
+ /* Prepare common MS IOCB */
+ /* Request size adjusted after CT preparation */
+ ms_pkt = ha->isp_ops.prep_ms_fdmi_iocb(ha, 0, RHBA_RSP_SIZE);
+
+ /* Prepare CT request */
+ ct_req = qla2x00_prep_ct_fdmi_req(&ha->ct_sns->p.req, RHBA_CMD,
+ RHBA_RSP_SIZE);
+ ct_rsp = &ha->ct_sns->p.rsp;
+
+ /* Prepare FDMI command arguments -- attribute block, attributes. */
+ memcpy(ct_req->req.rhba.hba_identifier, ha->port_name, WWN_SIZE);
+ ct_req->req.rhba.entry_count = __constant_cpu_to_be32(1);
+ memcpy(ct_req->req.rhba.port_name, ha->port_name, WWN_SIZE);
+ size = 2 * WWN_SIZE + 4 + 4;
+
+ /* Attributes */
+ ct_req->req.rhba.attrs.count =
+ __constant_cpu_to_be32(FDMI_HBA_ATTR_COUNT);
+ entries = ct_req->req.rhba.hba_identifier;
+
+ /* Nodename. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_NODE_NAME);
+ eiter->len = __constant_cpu_to_be16(4 + WWN_SIZE);
+ memcpy(eiter->a.node_name, ha->node_name, WWN_SIZE);
+ size += 4 + WWN_SIZE;
+
+ DEBUG13(printk("%s(%ld): NODENAME=%02x%02x%02x%02x%02x%02x%02x%02x.\n",
+ __func__, ha->host_no,
+ eiter->a.node_name[0], eiter->a.node_name[1], eiter->a.node_name[2],
+ eiter->a.node_name[3], eiter->a.node_name[4], eiter->a.node_name[5],
+ eiter->a.node_name[6], eiter->a.node_name[7]));
+
+ /* Manufacturer. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_MANUFACTURER);
+ strcpy(eiter->a.manufacturer, "QLogic Corporation");
+ alen = strlen(eiter->a.manufacturer);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): MANUFACTURER=%s.\n", __func__, ha->host_no,
+ eiter->a.manufacturer));
+
+ /* Serial number. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_SERIAL_NUMBER);
+ sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | ha->serial1;
+ sprintf(eiter->a.serial_num, "%c%05d", 'A' + sn / 100000, sn % 100000);
+ alen = strlen(eiter->a.serial_num);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): SERIALNO=%s.\n", __func__, ha->host_no,
+ eiter->a.serial_num));
+
+ /* Model name. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_MODEL);
+ strcpy(eiter->a.model, ha->model_number);
+ alen = strlen(eiter->a.model);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): MODEL_NAME=%s.\n", __func__, ha->host_no,
+ eiter->a.model));
+
+ /* Model description. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_MODEL_DESCRIPTION);
+ if (ha->model_desc)
+ strncpy(eiter->a.model_desc, ha->model_desc, 80);
+ alen = strlen(eiter->a.model_desc);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): MODEL_DESC=%s.\n", __func__, ha->host_no,
+ eiter->a.model_desc));
+
+ /* Hardware version. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_HARDWARE_VERSION);
+ strcpy(eiter->a.hw_version, ha->adapter_id);
+ alen = strlen(eiter->a.hw_version);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): HARDWAREVER=%s.\n", __func__, ha->host_no,
+ eiter->a.hw_version));
+
+ /* Driver version. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_DRIVER_VERSION);
+ strcpy(eiter->a.driver_version, qla2x00_version_str);
+ alen = strlen(eiter->a.driver_version);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): DRIVERVER=%s.\n", __func__, ha->host_no,
+ eiter->a.driver_version));
+
+ /* Option ROM version. */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_OPTION_ROM_VERSION);
+ strcpy(eiter->a.orom_version, "0.00");
+ alen = strlen(eiter->a.orom_version);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): OPTROMVER=%s.\n", __func__, ha->host_no,
+ eiter->a.orom_version));
+
+ /* Firmware version */
+ eiter = (struct ct_fdmi_hba_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_HBA_FIRMWARE_VERSION);
+ ha->isp_ops.fw_version_str(ha, eiter->a.fw_version);
+ alen = strlen(eiter->a.fw_version);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): FIRMWAREVER=%s.\n", __func__, ha->host_no,
+ eiter->a.fw_version));
+
+ /* Update MS request size. */
+ qla2x00_update_ms_fdmi_iocb(ha, size + 16);
+
+ DEBUG13(printk("%s(%ld): RHBA identifier="
+ "%02x%02x%02x%02x%02x%02x%02x%02x size=%d.\n", __func__,
+ ha->host_no, ct_req->req.rhba.hba_identifier[0],
+ ct_req->req.rhba.hba_identifier[1],
+ ct_req->req.rhba.hba_identifier[2],
+ ct_req->req.rhba.hba_identifier[3],
+ ct_req->req.rhba.hba_identifier[4],
+ ct_req->req.rhba.hba_identifier[5],
+ ct_req->req.rhba.hba_identifier[6],
+ ct_req->req.rhba.hba_identifier[7], size));
+ DEBUG13(qla2x00_dump_buffer(entries, size));
+
+ /* Execute MS IOCB */
+ rval = qla2x00_issue_iocb(ha, ha->ms_iocb, ha->ms_iocb_dma,
+ sizeof(ms_iocb_entry_t));
+ if (rval != QLA_SUCCESS) {
+ /*EMPTY*/
+ DEBUG2_3(printk("scsi(%ld): RHBA issue IOCB failed (%d).\n",
+ ha->host_no, rval));
+ } else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp, "RHBA") !=
+ QLA_SUCCESS) {
+ rval = QLA_FUNCTION_FAILED;
+ if (ct_rsp->header.reason_code == CT_REASON_CANNOT_PERFORM &&
+ ct_rsp->header.explanation_code ==
+ CT_EXPL_ALREADY_REGISTERED) {
+ DEBUG2_13(printk("%s(%ld): HBA already registered.\n",
+ __func__, ha->host_no));
+ rval = QLA_ALREADY_REGISTERED;
+ }
+ } else {
+ DEBUG2(printk("scsi(%ld): RHBA exiting normally.\n",
+ ha->host_no));
+ }
+
+ return rval;
+}
+
+/**
+ * qla2x00_fdmi_dhba() -
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+static int
+qla2x00_fdmi_dhba(scsi_qla_host_t *ha)
+{
+ int rval;
+
+ ms_iocb_entry_t *ms_pkt;
+ struct ct_sns_req *ct_req;
+ struct ct_sns_rsp *ct_rsp;
+
+ /* Issue RPA */
+ /* Prepare common MS IOCB */
+ ms_pkt = ha->isp_ops.prep_ms_fdmi_iocb(ha, DHBA_REQ_SIZE,
+ DHBA_RSP_SIZE);
+
+ /* Prepare CT request */
+ ct_req = qla2x00_prep_ct_fdmi_req(&ha->ct_sns->p.req, DHBA_CMD,
+ DHBA_RSP_SIZE);
+ ct_rsp = &ha->ct_sns->p.rsp;
+
+ /* Prepare FDMI command arguments -- portname. */
+ memcpy(ct_req->req.dhba.port_name, ha->port_name, WWN_SIZE);
+
+ DEBUG13(printk("%s(%ld): DHBA portname="
+ "%02x%02x%02x%02x%02x%02x%02x%02x.\n", __func__, ha->host_no,
+ ct_req->req.dhba.port_name[0], ct_req->req.dhba.port_name[1],
+ ct_req->req.dhba.port_name[2], ct_req->req.dhba.port_name[3],
+ ct_req->req.dhba.port_name[4], ct_req->req.dhba.port_name[5],
+ ct_req->req.dhba.port_name[6], ct_req->req.dhba.port_name[7]));
+
+ /* Execute MS IOCB */
+ rval = qla2x00_issue_iocb(ha, ha->ms_iocb, ha->ms_iocb_dma,
+ sizeof(ms_iocb_entry_t));
+ if (rval != QLA_SUCCESS) {
+ /*EMPTY*/
+ DEBUG2_3(printk("scsi(%ld): DHBA issue IOCB failed (%d).\n",
+ ha->host_no, rval));
+ } else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp, "DHBA") !=
+ QLA_SUCCESS) {
+ rval = QLA_FUNCTION_FAILED;
+ } else {
+ DEBUG2(printk("scsi(%ld): DHBA exiting normally.\n",
+ ha->host_no));
+ }
+
+ return rval;
+}
+
+/**
+ * qla2x00_fdmi_rpa() -
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+static int
+qla2x00_fdmi_rpa(scsi_qla_host_t *ha)
+{
+ int rval, alen;
+ uint32_t size, max_frame_size;
+
+ ms_iocb_entry_t *ms_pkt;
+ struct ct_sns_req *ct_req;
+ struct ct_sns_rsp *ct_rsp;
+ uint8_t *entries;
+ struct ct_fdmi_port_attr *eiter;
+ struct init_cb_24xx *icb24 = (struct init_cb_24xx *)ha->init_cb;
+
+ /* Issue RPA */
+ /* Prepare common MS IOCB */
+ /* Request size adjusted after CT preparation */
+ ms_pkt = ha->isp_ops.prep_ms_fdmi_iocb(ha, 0, RPA_RSP_SIZE);
+
+ /* Prepare CT request */
+ ct_req = qla2x00_prep_ct_fdmi_req(&ha->ct_sns->p.req, RPA_CMD,
+ RPA_RSP_SIZE);
+ ct_rsp = &ha->ct_sns->p.rsp;
+
+ /* Prepare FDMI command arguments -- attribute block, attributes. */
+ memcpy(ct_req->req.rpa.port_name, ha->port_name, WWN_SIZE);
+ size = WWN_SIZE + 4;
+
+ /* Attributes */
+ ct_req->req.rpa.attrs.count =
+ __constant_cpu_to_be32(FDMI_PORT_ATTR_COUNT);
+ entries = ct_req->req.rpa.port_name;
+
+ /* FC4 types. */
+ eiter = (struct ct_fdmi_port_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_PORT_FC4_TYPES);
+ eiter->len = __constant_cpu_to_be16(4 + 32);
+ eiter->a.fc4_types[2] = 0x01;
+ size += 4 + 32;
+
+ DEBUG13(printk("%s(%ld): FC4_TYPES=%02x %02x.\n", __func__, ha->host_no,
+ eiter->a.fc4_types[2], eiter->a.fc4_types[1]));
+
+ /* Supported speed. */
+ eiter = (struct ct_fdmi_port_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_PORT_SUPPORT_SPEED);
+ eiter->len = __constant_cpu_to_be16(4 + 4);
+ if (IS_QLA25XX(ha))
+ eiter->a.sup_speed = __constant_cpu_to_be32(4);
+ else if (IS_QLA24XX(ha))
+ eiter->a.sup_speed = __constant_cpu_to_be32(8);
+ else if (IS_QLA23XX(ha))
+ eiter->a.sup_speed = __constant_cpu_to_be32(2);
+ else
+ eiter->a.sup_speed = __constant_cpu_to_be32(1);
+ size += 4 + 4;
+
+ DEBUG13(printk("%s(%ld): SUPPORTED_SPEED=%x.\n", __func__, ha->host_no,
+ eiter->a.sup_speed));
+
+ /* Current speed. */
+ eiter = (struct ct_fdmi_port_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_PORT_CURRENT_SPEED);
+ eiter->len = __constant_cpu_to_be16(4 + 4);
+ switch (ha->link_data_rate) {
+ case 0:
+ eiter->a.cur_speed = __constant_cpu_to_be32(1);
+ break;
+ case 1:
+ eiter->a.cur_speed = __constant_cpu_to_be32(2);
+ break;
+ case 3:
+ eiter->a.cur_speed = __constant_cpu_to_be32(8);
+ break;
+ case 4:
+ eiter->a.cur_speed = __constant_cpu_to_be32(4);
+ break;
+ }
+ size += 4 + 4;
+
+ DEBUG13(printk("%s(%ld): CURRENT_SPEED=%x.\n", __func__, ha->host_no,
+ eiter->a.cur_speed));
+
+ /* Max frame size. */
+ eiter = (struct ct_fdmi_port_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
+ eiter->len = __constant_cpu_to_be16(4 + 4);
+ max_frame_size = IS_QLA24XX(ha) || IS_QLA25XX(ha) ?
+ (uint32_t) icb24->frame_payload_size:
+ (uint32_t) ha->init_cb->frame_payload_size;
+ eiter->a.max_frame_size = cpu_to_be32(max_frame_size);
+ size += 4 + 4;
+
+ DEBUG13(printk("%s(%ld): MAX_FRAME_SIZE=%x.\n", __func__, ha->host_no,
+ eiter->a.max_frame_size));
+
+ /* OS device name. */
+ eiter = (struct ct_fdmi_port_attr *) (entries + size);
+ eiter->type = __constant_cpu_to_be16(FDMI_PORT_OS_DEVICE_NAME);
+ sprintf(eiter->a.os_dev_name, "/proc/scsi/qla2xxx/%ld", ha->host_no);
+ alen = strlen(eiter->a.os_dev_name);
+ alen += (alen & 3) ? (4 - (alen & 3)) : 4;
+ eiter->len = cpu_to_be16(4 + alen);
+ size += 4 + alen;
+
+ DEBUG13(printk("%s(%ld): OS_DEVICE_NAME=%s.\n", __func__, ha->host_no,
+ eiter->a.os_dev_name));
+
+ /* Update MS request size. */
+ qla2x00_update_ms_fdmi_iocb(ha, size + 16);
+
+ DEBUG13(printk("%s(%ld): RPA portname="
+ "%02x%02x%02x%02x%02x%02x%02x%02x size=%d.\n", __func__,
+ ha->host_no, ct_req->req.rpa.port_name[0],
+ ct_req->req.rpa.port_name[1], ct_req->req.rpa.port_name[2],
+ ct_req->req.rpa.port_name[3], ct_req->req.rpa.port_name[4],
+ ct_req->req.rpa.port_name[5], ct_req->req.rpa.port_name[6],
+ ct_req->req.rpa.port_name[7], size));
+ DEBUG13(qla2x00_dump_buffer(entries, size));
+
+ /* Execute MS IOCB */
+ rval = qla2x00_issue_iocb(ha, ha->ms_iocb, ha->ms_iocb_dma,
+ sizeof(ms_iocb_entry_t));
+ if (rval != QLA_SUCCESS) {
+ /*EMPTY*/
+ DEBUG2_3(printk("scsi(%ld): RPA issue IOCB failed (%d).\n",
+ ha->host_no, rval));
+ } else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp, "RPA") !=
+ QLA_SUCCESS) {
+ rval = QLA_FUNCTION_FAILED;
+ } else {
+ DEBUG2(printk("scsi(%ld): RPA exiting normally.\n",
+ ha->host_no));
+ }
+
+ return rval;
+}
+
+/**
+ * qla2x00_fdmi_register() -
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+int
+qla2x00_fdmi_register(scsi_qla_host_t *ha)
+{
+ int rval;
+
+ rval = qla2x00_mgmt_svr_login(ha);
+ if (rval)
+ return rval;
+
+ rval = qla2x00_fdmi_rhba(ha);
+ if (rval) {
+ if (rval != QLA_ALREADY_REGISTERED)
+ return rval;
+
+ rval = qla2x00_fdmi_dhba(ha);
+ if (rval)
+ return rval;
+
+ rval = qla2x00_fdmi_rhba(ha);
+ if (rval)
+ return rval;
+ }
+ rval = qla2x00_fdmi_rpa(ha);
+
+ return rval;
+}
ha->mbx_flags = 0;
ha->isp_abort_cnt = 0;
ha->beacon_blink_led = 0;
+ set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
rval = ha->isp_ops.pci_config(ha);
ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0);
ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
- ha->flags.enable_led_scheme = ((nv->efi_parameters & BIT_3) ? 1 : 0);
+ ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
ha->operating_mode =
(icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;
fcport->iodesc_idx_sent = IODESC_INVALID_INDEX;
atomic_set(&fcport->state, FCS_UNCONFIGURED);
fcport->flags = FCF_RLC_SUPPORT;
+ fcport->supported_classes = FC_COS_UNSPECIFIED;
return (fcport);
}
continue;
/* Bypass if not same domain and area of adapter. */
- if (area != ha->d_id.b.area || domain != ha->d_id.b.domain)
+ if (area && domain &&
+ (area != ha->d_id.b.area || domain != ha->d_id.b.domain))
continue;
/* Bypass invalid local loop ID. */
return;
}
rport->dd_data = fcport;
+ rport->supported_classes = fcport->supported_classes;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
if (fcport->port_type == FCT_INITIATOR)
return (QLA_SUCCESS);
}
do {
+ /* FDMI support. */
+ if (ql2xfdmienable &&
+ test_and_clear_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags))
+ qla2x00_fdmi_register(ha);
+
/* Ensure we are logged into the SNS. */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
loop_id = NPH_SNS;
if (new_fcport->d_id.b24 == ha->d_id.b24)
continue;
+ /* Bypass if same domain and area of adapter. */
+ if (((new_fcport->d_id.b24 & 0xffff00) ==
+ (ha->d_id.b24 & 0xffff00)) && ha->current_topology ==
+ ISP_CFG_FL)
+ continue;
+
/* Bypass reserved domain fields. */
if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0)
continue;
}
}
+ if (mb[10] & BIT_0)
+ fcport->supported_classes |= FC_COS_CLASS2;
+ if (mb[10] & BIT_1)
+ fcport->supported_classes |= FC_COS_CLASS3;
+
rval = QLA_SUCCESS;
break;
} else if (mb[0] == MBS_LOOP_ID_USED) {
ha->req_q_cnt = ha->request_q_length -
(ha->req_ring_index - cnt);
}
- if (ha->req_q_cnt < (req_cnt + 2)) {
- if (cmd->use_sg)
- pci_unmap_sg(ha->pdev, sg, cmd->use_sg,
- cmd->sc_data_direction);
+ if (ha->req_q_cnt < (req_cnt + 2))
goto queuing_error;
- }
/* Build command packet. */
ha->current_outstanding_cmd = handle;
ha->flags.management_server_logged_in = 0;
ha->link_data_rate = 0;
+ if (ql2xfdmienable)
+ set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
/* Update AEN queue. */
qla2x00_enqueue_aen(ha, MBA_LOOP_DOWN, NULL);
#include "qla_def.h"
#include <linux/delay.h>
+#include <scsi/scsi_transport_fc.h>
static void
qla2x00_mbx_sem_timeout(unsigned long data)
mb0 = RD_REG_WORD(®->isp24.mailbox0);
ictrl = RD_REG_DWORD(®->isp24.ictrl);
} else {
- mb0 = RD_MAILBOX_REG(ha, reg->isp, 0);
+ mb0 = RD_MAILBOX_REG(ha, ®->isp, 0);
ictrl = RD_REG_WORD(®->isp.ictrl);
}
printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
}
#endif
-/*
- * qla2x00_target_reset
- * Issue target reset mailbox command.
- *
- * Input:
- * ha = adapter block pointer.
- * TARGET_QUEUE_LOCK must be released.
- * ADAPTER_STATE_LOCK must be released.
- *
- * Returns:
- * qla2x00 local function return status code.
- *
- * Context:
- * Kernel context.
- */
-int
-qla2x00_target_reset(scsi_qla_host_t *ha, struct fc_port *fcport)
-{
- int rval;
- mbx_cmd_t mc;
- mbx_cmd_t *mcp = &mc;
-
- DEBUG11(printk("qla2x00_target_reset(%ld): entered.\n", ha->host_no);)
-
- if (atomic_read(&fcport->state) != FCS_ONLINE)
- return 0;
-
- mcp->mb[0] = MBC_TARGET_RESET;
- if (HAS_EXTENDED_IDS(ha))
- mcp->mb[1] = fcport->loop_id;
- else
- mcp->mb[1] = fcport->loop_id << 8;
- mcp->mb[2] = ha->loop_reset_delay;
- mcp->out_mb = MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_0;
- mcp->tov = 30;
- mcp->flags = 0;
- rval = qla2x00_mailbox_command(ha, mcp);
-
- if (rval != QLA_SUCCESS) {
- /*EMPTY*/
- DEBUG2_3_11(printk("qla2x00_target_reset(%ld): failed=%x.\n",
- ha->host_no, rval);)
- } else {
- /*EMPTY*/
- DEBUG11(printk("qla2x00_target_reset(%ld): done.\n",
- ha->host_no);)
- }
-
- return rval;
-}
-
/*
* qla2x00_get_adapter_id
* Get adapter ID and topology.
fcport->port_type = FCT_INITIATOR;
else
fcport->port_type = FCT_TARGET;
+
+ /* Passback COS information. */
+ fcport->supported_classes = (pd->options & BIT_4) ?
+ FC_COS_CLASS2: FC_COS_CLASS3;
}
gpd_error_out:
mb[1] |= BIT_1;
} else
mb[1] = BIT_0;
+
+ /* Passback COS information. */
+ mb[10] = 0;
+ if (lg->io_parameter[7] || lg->io_parameter[8])
+ mb[10] |= BIT_0; /* Class 2. */
+ if (lg->io_parameter[9] || lg->io_parameter[10])
+ mb[10] |= BIT_1; /* Class 3. */
}
dma_pool_free(ha->s_dma_pool, lg, lg_dma);
mb[2] = mcp->mb[2];
mb[6] = mcp->mb[6];
mb[7] = mcp->mb[7];
+ /* COS retrieved from Get-Port-Database mailbox command. */
+ mb[10] = 0;
}
if (rval != QLA_SUCCESS) {
return rval;
}
+
+int
+qla2x00_stop_firmware(scsi_qla_host_t *ha)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+ mcp->mb[0] = MBC_STOP_FIRMWARE;
+ mcp->out_mb = MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = 5;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(ha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
+ ha->host_no, rval));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+ }
+
+ return rval;
+}
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
-int ql2xfwloadbin;
+int ql2xfwloadbin=1;
module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xfwloadbin,
"Load ISP2xxx firmware image via hotplug.");
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
+int ql2xfdmienable;
+module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfdmienable,
+ "Enables FDMI registratons "
+ "Default is 0 - no FDMI. 1 - perfom FDMI.");
+
/*
* SCSI host template entry points
*/
static int qla2x00_loop_reset(scsi_qla_host_t *ha);
static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
+static int qla2x00_change_queue_depth(struct scsi_device *, int);
+static int qla2x00_change_queue_type(struct scsi_device *, int);
+
static struct scsi_host_template qla2x00_driver_template = {
.module = THIS_MODULE,
.name = "qla2xxx",
.slave_alloc = qla2xxx_slave_alloc,
.slave_destroy = qla2xxx_slave_destroy,
+ .change_queue_depth = qla2x00_change_queue_depth,
+ .change_queue_type = qla2x00_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
* which equates to 0x800000 sectors.
*/
.max_sectors = 0xFFFF,
+ .shost_attrs = qla2x00_host_attrs,
};
static struct scsi_host_template qla24xx_driver_template = {
.slave_alloc = qla2xxx_slave_alloc,
.slave_destroy = qla2xxx_slave_destroy,
+ .change_queue_depth = qla2x00_change_queue_depth,
+ .change_queue_type = qla2x00_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
+ .shost_attrs = qla2x00_host_attrs,
};
static struct scsi_transport_template *qla2xxx_transport_template = NULL;
static int
qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
{
-#define ABORT_POLLING_PERIOD HZ
-#define ABORT_WAIT_ITER ((10 * HZ) / (ABORT_POLLING_PERIOD))
+#define ABORT_POLLING_PERIOD 1000
+#define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
unsigned long wait_iter = ABORT_WAIT_ITER;
int ret = QLA_SUCCESS;
while (CMD_SP(cmd)) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(ABORT_POLLING_PERIOD);
+ msleep(ABORT_POLLING_PERIOD);
if (--wait_iter)
break;
if (fcport->port_type != FCT_TARGET)
continue;
- status = qla2x00_target_reset(ha, fcport);
+ status = qla2x00_device_reset(ha, fcport);
if (status != QLA_SUCCESS)
break;
}
sdev->hostdata = NULL;
}
+static int
+qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ return sdev->queue_depth;
+}
+
+static int
+qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
+{
+ if (sdev->tagged_supported) {
+ scsi_set_tag_type(sdev, tag_type);
+ if (tag_type)
+ scsi_activate_tcq(sdev, sdev->queue_depth);
+ else
+ scsi_deactivate_tcq(sdev, sdev->queue_depth);
+ } else
+ tag_type = 0;
+
+ return tag_type;
+}
+
/**
* qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
static void
qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
{
- /* Assume 32bit DMA address */
+ /* Assume a 32bit DMA mask. */
ha->flags.enable_64bit_addressing = 0;
- /*
- * Given the two variants pci_set_dma_mask(), allow the compiler to
- * assist in setting the proper dma mask.
- */
- if (sizeof(dma_addr_t) > 4) {
- if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK) == 0) {
+ if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
+ /* Any upper-dword bits set? */
+ if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
+ !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
+ /* Ok, a 64bit DMA mask is applicable. */
ha->flags.enable_64bit_addressing = 1;
ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
-
- if (pci_set_consistent_dma_mask(ha->pdev,
- DMA_64BIT_MASK)) {
- qla_printk(KERN_DEBUG, ha,
- "Failed to set 64 bit PCI consistent mask; "
- "using 32 bit.\n");
- pci_set_consistent_dma_mask(ha->pdev,
- DMA_32BIT_MASK);
- }
- } else {
- qla_printk(KERN_DEBUG, ha,
- "Failed to set 64 bit PCI DMA mask, falling back "
- "to 32 bit MASK.\n");
- pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK);
+ return;
}
- } else {
- pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK);
}
+
+ dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
+ pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
}
static int
ha->prev_topology = 0;
ha->ports = MAX_BUSES;
ha->init_cb_size = sizeof(init_cb_t);
+ ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
/* Assign ISP specific operations. */
ha->isp_ops.pci_config = qla2100_pci_config;
ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_32;
ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_32;
ha->isp_ops.prep_ms_iocb = qla2x00_prep_ms_iocb;
+ ha->isp_ops.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb;
ha->isp_ops.read_nvram = qla2x00_read_nvram_data;
ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
ha->isp_ops.fw_dump = qla2100_fw_dump;
ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct init_cb_24xx);
+ ha->mgmt_svr_loop_id = 10;
ha->isp_ops.pci_config = qla24xx_pci_config;
ha->isp_ops.reset_chip = qla24xx_reset_chip;
ha->isp_ops.chip_diag = qla24xx_chip_diag;
ha->isp_ops.fabric_login = qla24xx_login_fabric;
ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
+ ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
ha->isp_ops.fw_dump = qla24xx_fw_dump;
return 0;
probe_failed:
- fc_remove_host(ha->host);
-
qla2x00_free_device(ha);
scsi_host_put(host);
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
qla2x00_cancel_io_descriptors(ha);
- /* turn-off interrupts on the card */
- if (ha->interrupts_on)
- ha->isp_ops.disable_intrs(ha);
-
/* Disable timer */
if (ha->timer_active)
qla2x00_stop_timer(ha);
}
}
- qla2x00_mem_free(ha);
+ /* Stop currently executing firmware. */
+ qla2x00_stop_firmware(ha);
+
+ /* turn-off interrupts on the card */
+ if (ha->interrupts_on)
+ ha->isp_ops.disable_intrs(ha);
+ qla2x00_mem_free(ha);
ha->flags.online = 0;
{
struct list_head *fcpl, *fcptemp;
fc_port_t *fcport;
- unsigned long wtime;/* max wait time if mbx cmd is busy. */
+ unsigned int wtime;/* max wait time if mbx cmd is busy. */
if (ha == NULL) {
/* error */
}
/* Make sure all other threads are stopped. */
- wtime = 60 * HZ;
- while (ha->dpc_wait && wtime) {
- set_current_state(TASK_INTERRUPTIBLE);
- wtime = schedule_timeout(wtime);
- }
+ wtime = 60 * 1000;
+ while (ha->dpc_wait && wtime)
+ wtime = msleep_interruptible(wtime);
/* free ioctl memory */
qla2x00_free_ioctl_mem(ha);
int
qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
{
- const unsigned int step = HZ/10;
+ const unsigned int step = 100; /* msecs */
+ unsigned int iterations = jiffies_to_msecs(timeout)/100;
do {
if (!down_trylock(sema))
return 0;
- set_current_state(TASK_INTERRUPTIBLE);
- if (schedule_timeout(step))
+ if (msleep_interruptible(step))
break;
- } while ((timeout -= step) > 0);
+ } while (--iterations >= 0);
return -ETIMEDOUT;
}
uint32_t dwords)
{
uint32_t i;
- struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
-
- /* Pause RISC. */
- WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
/* Dword reads to flash. */
for (i = 0; i < dwords; i++, faddr++)
dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
flash_data_to_access_addr(faddr)));
- /* Release RISC pause. */
- WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
-
return dwptr;
}
ret = QLA_SUCCESS;
- /* Pause RISC. */
- WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
-
qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
ha->host_no, man_id, flash_id));
RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
- /* Release RISC pause. */
- WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
-
return ret;
}
{
uint32_t i;
uint32_t *dwptr;
- struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
-
- /* Pause RISC. */
- WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
/* Dword reads to flash. */
dwptr = (uint32_t *)buf;
dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
nvram_data_to_access_addr(naddr)));
- /* Release RISC pause. */
- WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
-
return buf;
}
ret = QLA_SUCCESS;
- /* Pause RISC. */
- WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
-
/* Enable flash write. */
WRT_REG_DWORD(®->ctrl_status,
RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE);
RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
- /* Release RISC pause. */
- WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE);
- RD_REG_DWORD(®->hccr); /* PCI Posting. */
-
return ret;
}
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.01.00b5-k"
+#define QLA2XXX_VERSION "8.01.00-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 1
#define QLA_DRIVER_PATCH_VER 0
-#define QLA_DRIVER_BETA_VER 5
+#define QLA_DRIVER_BETA_VER 0
--- /dev/null
+/*
+ * RAID Attributes
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/raid_class.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#define RAID_NUM_ATTRS 3
+
+struct raid_internal {
+ struct raid_template r;
+ struct raid_function_template *f;
+ /* The actual attributes */
+ struct class_device_attribute private_attrs[RAID_NUM_ATTRS];
+ /* The array of null terminated pointers to attributes
+ * needed by scsi_sysfs.c */
+ struct class_device_attribute *attrs[RAID_NUM_ATTRS + 1];
+};
+
+struct raid_component {
+ struct list_head node;
+ struct device *dev;
+ int num;
+};
+
+#define to_raid_internal(tmpl) container_of(tmpl, struct raid_internal, r)
+
+#define tc_to_raid_internal(tcont) ({ \
+ struct raid_template *r = \
+ container_of(tcont, struct raid_template, raid_attrs); \
+ to_raid_internal(r); \
+})
+
+#define ac_to_raid_internal(acont) ({ \
+ struct transport_container *tc = \
+ container_of(acont, struct transport_container, ac); \
+ tc_to_raid_internal(tc); \
+})
+
+#define class_device_to_raid_internal(cdev) ({ \
+ struct attribute_container *ac = \
+ attribute_container_classdev_to_container(cdev); \
+ ac_to_raid_internal(ac); \
+})
+
+
+static int raid_match(struct attribute_container *cont, struct device *dev)
+{
+ /* We have to look for every subsystem that could house
+ * emulated RAID devices, so start with SCSI */
+ struct raid_internal *i = ac_to_raid_internal(cont);
+
+ if (scsi_is_sdev_device(dev)) {
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ if (i->f->cookie != sdev->host->hostt)
+ return 0;
+
+ return i->f->is_raid(dev);
+ }
+ /* FIXME: look at other subsystems too */
+ return 0;
+}
+
+static int raid_setup(struct transport_container *tc, struct device *dev,
+ struct class_device *cdev)
+{
+ struct raid_data *rd;
+
+ BUG_ON(class_get_devdata(cdev));
+
+ rd = kmalloc(sizeof(*rd), GFP_KERNEL);
+ if (!rd)
+ return -ENOMEM;
+
+ memset(rd, 0, sizeof(*rd));
+ INIT_LIST_HEAD(&rd->component_list);
+ class_set_devdata(cdev, rd);
+
+ return 0;
+}
+
+static int raid_remove(struct transport_container *tc, struct device *dev,
+ struct class_device *cdev)
+{
+ struct raid_data *rd = class_get_devdata(cdev);
+ struct raid_component *rc, *next;
+ class_set_devdata(cdev, NULL);
+ list_for_each_entry_safe(rc, next, &rd->component_list, node) {
+ char buf[40];
+ snprintf(buf, sizeof(buf), "component-%d", rc->num);
+ list_del(&rc->node);
+ sysfs_remove_link(&cdev->kobj, buf);
+ kfree(rc);
+ }
+ kfree(class_get_devdata(cdev));
+ return 0;
+}
+
+static DECLARE_TRANSPORT_CLASS(raid_class,
+ "raid_devices",
+ raid_setup,
+ raid_remove,
+ NULL);
+
+static struct {
+ enum raid_state value;
+ char *name;
+} raid_states[] = {
+ { RAID_ACTIVE, "active" },
+ { RAID_DEGRADED, "degraded" },
+ { RAID_RESYNCING, "resyncing" },
+ { RAID_OFFLINE, "offline" },
+};
+
+static const char *raid_state_name(enum raid_state state)
+{
+ int i;
+ char *name = NULL;
+
+ for (i = 0; i < sizeof(raid_states)/sizeof(raid_states[0]); i++) {
+ if (raid_states[i].value == state) {
+ name = raid_states[i].name;
+ break;
+ }
+ }
+ return name;
+}
+
+
+#define raid_attr_show_internal(attr, fmt, var, code) \
+static ssize_t raid_show_##attr(struct class_device *cdev, char *buf) \
+{ \
+ struct raid_data *rd = class_get_devdata(cdev); \
+ code \
+ return snprintf(buf, 20, #fmt "\n", var); \
+}
+
+#define raid_attr_ro_states(attr, states, code) \
+raid_attr_show_internal(attr, %s, name, \
+ const char *name; \
+ code \
+ name = raid_##states##_name(rd->attr); \
+) \
+static CLASS_DEVICE_ATTR(attr, S_IRUGO, raid_show_##attr, NULL)
+
+
+#define raid_attr_ro_internal(attr, code) \
+raid_attr_show_internal(attr, %d, rd->attr, code) \
+static CLASS_DEVICE_ATTR(attr, S_IRUGO, raid_show_##attr, NULL)
+
+#define ATTR_CODE(attr) \
+ struct raid_internal *i = class_device_to_raid_internal(cdev); \
+ if (i->f->get_##attr) \
+ i->f->get_##attr(cdev->dev);
+
+#define raid_attr_ro(attr) raid_attr_ro_internal(attr, )
+#define raid_attr_ro_fn(attr) raid_attr_ro_internal(attr, ATTR_CODE(attr))
+#define raid_attr_ro_state(attr) raid_attr_ro_states(attr, attr, ATTR_CODE(attr))
+
+raid_attr_ro(level);
+raid_attr_ro_fn(resync);
+raid_attr_ro_state(state);
+
+void raid_component_add(struct raid_template *r,struct device *raid_dev,
+ struct device *component_dev)
+{
+ struct class_device *cdev =
+ attribute_container_find_class_device(&r->raid_attrs.ac,
+ raid_dev);
+ struct raid_component *rc;
+ struct raid_data *rd = class_get_devdata(cdev);
+ char buf[40];
+
+ rc = kmalloc(sizeof(*rc), GFP_KERNEL);
+ if (!rc)
+ return;
+
+ INIT_LIST_HEAD(&rc->node);
+ rc->dev = component_dev;
+ rc->num = rd->component_count++;
+
+ snprintf(buf, sizeof(buf), "component-%d", rc->num);
+ list_add_tail(&rc->node, &rd->component_list);
+ sysfs_create_link(&cdev->kobj, &component_dev->kobj, buf);
+}
+EXPORT_SYMBOL(raid_component_add);
+
+struct raid_template *
+raid_class_attach(struct raid_function_template *ft)
+{
+ struct raid_internal *i = kmalloc(sizeof(struct raid_internal),
+ GFP_KERNEL);
+ int count = 0;
+
+ if (unlikely(!i))
+ return NULL;
+
+ memset(i, 0, sizeof(*i));
+
+ i->f = ft;
+
+ i->r.raid_attrs.ac.class = &raid_class.class;
+ i->r.raid_attrs.ac.match = raid_match;
+ i->r.raid_attrs.ac.attrs = &i->attrs[0];
+
+ attribute_container_register(&i->r.raid_attrs.ac);
+
+ i->attrs[count++] = &class_device_attr_level;
+ i->attrs[count++] = &class_device_attr_resync;
+ i->attrs[count++] = &class_device_attr_state;
+
+ i->attrs[count] = NULL;
+ BUG_ON(count > RAID_NUM_ATTRS);
+
+ return &i->r;
+}
+EXPORT_SYMBOL(raid_class_attach);
+
+void
+raid_class_release(struct raid_template *r)
+{
+ struct raid_internal *i = to_raid_internal(r);
+
+ attribute_container_unregister(&i->r.raid_attrs.ac);
+
+ kfree(i);
+}
+EXPORT_SYMBOL(raid_class_release);
+
+static __init int raid_init(void)
+{
+ return transport_class_register(&raid_class);
+}
+
+static __exit void raid_exit(void)
+{
+ transport_class_unregister(&raid_class);
+}
+
+MODULE_AUTHOR("James Bottomley");
+MODULE_DESCRIPTION("RAID device class");
+MODULE_LICENSE("GPL");
+
+module_init(raid_init);
+module_exit(raid_exit);
+
{"SGI", "RAID5", "*", BLIST_SPARSELUN},
{"SGI", "TP9100", "*", BLIST_REPORTLUN2},
{"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+ {"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
{"SONY", "TSL", NULL, BLIST_FORCELUN}, /* DDS3 & DDS4 autoloaders */
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/kthread.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
add_timer(&scmd->eh_timeout);
}
-EXPORT_SYMBOL(scsi_add_timer);
/**
* scsi_delete_timer - Delete/cancel timer for a given function.
return rtn;
}
-EXPORT_SYMBOL(scsi_delete_timer);
/**
* scsi_times_out - Timeout function for normal scsi commands.
__FUNCTION__, scmd, rtn));
if (rtn == SUCCESS)
return 0;
- else if (rtn == NEEDS_RETRY)
+ else if (rtn == NEEDS_RETRY) {
if (retry_cnt--)
goto retry_tur;
+ return 0;
+ }
return 1;
}
int rtn;
DECLARE_MUTEX_LOCKED(sem);
- /*
- * Flush resources
- */
-
- daemonize("scsi_eh_%d", shost->host_no);
-
current->flags |= PF_NOFREEZE;
-
shost->eh_wait = &sem;
- shost->ehandler = current;
/*
* Wake up the thread that created us.
SCSI_LOG_ERROR_RECOVERY(3, printk("Wake up parent of"
" scsi_eh_%d\n",shost->host_no));
- complete(shost->eh_notify);
-
while (1) {
/*
* If we get a signal, it means we are supposed to go
* semaphores isn't unreasonable.
*/
down_interruptible(&sem);
- if (shost->eh_kill)
+ if (kthread_should_stop())
break;
SCSI_LOG_ERROR_RECOVERY(1, printk("Error handler"
* Make sure that nobody tries to wake us up again.
*/
shost->eh_wait = NULL;
-
- /*
- * Knock this down too. From this point on, the host is flying
- * without a pilot. If this is because the module is being unloaded,
- * that's fine. If the user sent a signal to this thing, we are
- * potentially in real danger.
- */
- shost->eh_active = 0;
- shost->ehandler = NULL;
-
- /*
- * If anyone is waiting for us to exit (i.e. someone trying to unload
- * a driver), then wake up that process to let them know we are on
- * the way out the door.
- */
- complete_and_exit(shost->eh_notify, 0);
return 0;
}
#define MAX_BUF PAGE_SIZE
-/*
- * If we are told to probe a host, we will return 0 if the host is not
- * present, 1 if the host is present, and will return an identifying
- * string at *arg, if arg is non null, filling to the length stored at
- * (int *) arg
+/**
+ * ioctl_probe -- return host identification
+ * @host: host to identify
+ * @buffer: userspace buffer for identification
+ *
+ * Return an identifying string at @buffer, if @buffer is non-NULL, filling
+ * to the length stored at * (int *) @buffer.
*/
-
static int ioctl_probe(struct Scsi_Host *host, void __user *buffer)
{
unsigned int len, slen;
const char *string;
- int temp = host->hostt->present;
- if (temp && buffer) {
+ if (buffer) {
if (get_user(len, (unsigned int __user *) buffer))
return -EFAULT;
return -EFAULT;
}
}
- return temp;
+ return 1;
}
/*
extern void scsi_exit_devinfo(void);
/* scsi_error.c */
+extern void scsi_add_timer(struct scsi_cmnd *, int,
+ void (*)(struct scsi_cmnd *));
+extern int scsi_delete_timer(struct scsi_cmnd *);
extern void scsi_times_out(struct scsi_cmnd *cmd);
extern int scsi_error_handler(void *host);
extern int scsi_decide_disposition(struct scsi_cmnd *cmd);
sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
{
unsigned char cmd[10];
- unsigned long spintime_value = 0;
+ unsigned long spintime_expire = 0;
int retries, spintime;
unsigned int the_result;
struct scsi_sense_hdr sshdr;
scsi_execute_req(sdkp->device, cmd, DMA_NONE,
NULL, 0, &sshdr,
SD_TIMEOUT, SD_MAX_RETRIES);
- spintime_value = jiffies;
+ spintime_expire = jiffies + 100 * HZ;
+ spintime = 1;
}
- spintime = 1;
/* Wait 1 second for next try */
msleep(1000);
printk(".");
+
+ /*
+ * Wait for USB flash devices with slow firmware.
+ * Yes, this sense key/ASC combination shouldn't
+ * occur here. It's characteristic of these devices.
+ */
+ } else if (sense_valid &&
+ sshdr.sense_key == UNIT_ATTENTION &&
+ sshdr.asc == 0x28) {
+ if (!spintime) {
+ spintime_expire = jiffies + 5 * HZ;
+ spintime = 1;
+ }
+ /* Wait 1 second for next try */
+ msleep(1000);
} else {
/* we don't understand the sense code, so it's
* probably pointless to loop */
break;
}
- } while (spintime &&
- time_after(spintime_value + 100 * HZ, jiffies));
+ } while (spintime && time_before_eq(jiffies, spintime_expire));
if (spintime) {
if (scsi_status_is_good(the_result))
#ifdef CONFIG_SCSI_PROC_FS
#include <linux/proc_fs.h>
-static char *sg_version_date = "20050328";
+static char *sg_version_date = "20050901";
static int sg_proc_init(void);
static void sg_proc_cleanup(void);
unsigned long uaddr, size_t count, int rw,
unsigned long max_pfn)
{
+ unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ unsigned long start = uaddr >> PAGE_SHIFT;
+ const int nr_pages = end - start;
int res, i, j;
- unsigned int nr_pages;
struct page **pages;
- nr_pages = ((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
-
/* User attempted Overflow! */
if ((uaddr + count) < uaddr)
return -EINVAL;
Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
*/
-static char *verstr = "20050802";
+static char *verstr = "20050830";
#include <linux/module.h>
static int sgl_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages,
unsigned long uaddr, size_t count, int rw)
{
+ unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ unsigned long start = uaddr >> PAGE_SHIFT;
+ const int nr_pages = end - start;
int res, i, j;
- unsigned int nr_pages;
struct page **pages;
- nr_pages = ((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
-
/* User attempted Overflow! */
if ((uaddr + count) < uaddr)
return -EINVAL;
#include <linux/device.h>
#include <linux/list.h>
+#include <linux/klist.h>
#include <linux/spinlock.h>
struct attribute_container {
struct list_head node;
- struct list_head containers;
- spinlock_t containers_lock;
+ struct klist containers;
struct class *class;
struct class_device_attribute **attrs;
int (*match)(struct attribute_container *, struct device *);
--- /dev/null
+/*
+ */
+#include <linux/transport_class.h>
+
+struct raid_template {
+ struct transport_container raid_attrs;
+};
+
+struct raid_function_template {
+ void *cookie;
+ int (*is_raid)(struct device *);
+ void (*get_resync)(struct device *);
+ void (*get_state)(struct device *);
+};
+
+enum raid_state {
+ RAID_ACTIVE = 1,
+ RAID_DEGRADED,
+ RAID_RESYNCING,
+ RAID_OFFLINE,
+};
+
+struct raid_data {
+ struct list_head component_list;
+ int component_count;
+ int level;
+ enum raid_state state;
+ int resync;
+};
+
+#define DEFINE_RAID_ATTRIBUTE(type, attr) \
+static inline void \
+raid_set_##attr(struct raid_template *r, struct device *dev, type value) { \
+ struct class_device *cdev = \
+ attribute_container_find_class_device(&r->raid_attrs.ac, dev);\
+ struct raid_data *rd; \
+ BUG_ON(!cdev); \
+ rd = class_get_devdata(cdev); \
+ rd->attr = value; \
+} \
+static inline type \
+raid_get_##attr(struct raid_template *r, struct device *dev) { \
+ struct class_device *cdev = \
+ attribute_container_find_class_device(&r->raid_attrs.ac, dev);\
+ struct raid_data *rd; \
+ BUG_ON(!cdev); \
+ rd = class_get_devdata(cdev); \
+ return rd->attr; \
+}
+
+DEFINE_RAID_ATTRIBUTE(int, level)
+DEFINE_RAID_ATTRIBUTE(int, resync)
+DEFINE_RAID_ATTRIBUTE(enum raid_state, state)
+
+struct raid_template *raid_class_attach(struct raid_function_template *);
+void raid_class_release(struct raid_template *);
+
+void raid_component_add(struct raid_template *, struct device *,
+ struct device *);
}
-extern void scsi_add_timer(struct scsi_cmnd *, int,
- void (*)(struct scsi_cmnd *));
-extern int scsi_delete_timer(struct scsi_cmnd *);
extern void scsi_report_bus_reset(struct Scsi_Host *, int);
extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
extern int scsi_block_when_processing_errors(struct scsi_device *);
struct task_struct * ehandler; /* Error recovery thread. */
struct semaphore * eh_wait; /* The error recovery thread waits
on this. */
- struct completion * eh_notify; /* wait for eh to begin or end */
struct semaphore * eh_action; /* Wait for specific actions on the
host. */
unsigned int eh_active:1; /* Indicates the eh thread is awake and active if
this is true. */
- unsigned int eh_kill:1; /* set when killing the eh thread */
wait_queue_head_t host_wait;
struct scsi_host_template *hostt;
struct scsi_transport_template *transportt;
git.openpandora.org / pandora-kernel.git / commitdiff