sata_mv cosmetics

More cosmetic cleanups to unclutter the changes needed for PMP support.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 3e2f779..89a7982 100644 (file)
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -224,14 +224,20 @@ enum {
        SATA_STATUS_OFS         = 0x300,  /* ctrl, err regs follow status */
        SATA_ACTIVE_OFS         = 0x350,
        SATA_FIS_IRQ_CAUSE_OFS  = 0x364,
+
        LTMODE_OFS              = 0x30c,
+       LTMODE_BIT8             = (1 << 8),     /* unknown, but necessary */
+
        PHY_MODE3               = 0x310,
        PHY_MODE4               = 0x314,
        PHY_MODE2               = 0x330,
        SATA_IFCTL_OFS          = 0x344,
        SATA_IFSTAT_OFS         = 0x34c,
        VENDOR_UNIQUE_FIS_OFS   = 0x35c,
+
        FIS_CFG_OFS             = 0x360,
+       FIS_CFG_SINGLE_SYNC     = (1 << 16),    /* SYNC on DMA activation */
+
        MV5_PHY_MODE            = 0x74,
        MV5_LT_MODE             = 0x30,
        MV5_PHY_CTL             = 0x0C,
@@ -616,10 +622,10 @@ static const struct ata_port_info mv_port_info[] = {
                .port_ops       = &mv_iie_ops,
        },
        {  /* chip_soc */
-               .flags = MV_COMMON_FLAGS | MV_FLAG_SOC,
-               .pio_mask = 0x1f,      /* pio0-4 */
-               .udma_mask = ATA_UDMA6,
-               .port_ops = &mv_iie_ops,
+               .flags          = MV_COMMON_FLAGS | MV_FLAG_SOC,
+               .pio_mask       = 0x1f, /* pio0-4 */
+               .udma_mask      = ATA_UDMA6,
+               .port_ops       = &mv_iie_ops,
        },
 };
 
@@ -1377,7 +1383,8 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 
        if ((qc->tf.protocol != ATA_PROT_DMA) &&
            (qc->tf.protocol != ATA_PROT_NCQ)) {
-               /* We're about to send a non-EDMA capable command to the
+               /*
+                * We're about to send a non-EDMA capable command to the
                 * port.  Turn off EDMA so there won't be problems accessing
                 * shadow block, etc registers.
                 */
@@ -2293,14 +2300,13 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 
        /* Workaround for errata FEr SATA#10 (part 2) */
        do {
-               const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+               const unsigned long *timing =
+                               sata_ehc_deb_timing(&link->eh_context);
 
-               rc = sata_link_hardreset(link, timing, deadline + extra, &online, NULL);
-               if (rc) {
-                       ata_link_printk(link, KERN_ERR,
-                                       "COMRESET failed (errno=%d)\n", rc);
+               rc = sata_link_hardreset(link, timing, deadline + extra,
+                                        &online, NULL);
+               if (rc)
                        return rc;
-               }
                sata_scr_read(link, SCR_STATUS, &sstatus);
                if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
                        /* Force 1.5gb/s link speed and try again */
@@ -2310,7 +2316,7 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
                }
        } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
 
-       return online ? -EAGAIN : rc;
+       return rc;
 }
 
 static void mv_eh_freeze(struct ata_port *ap)
@@ -2975,7 +2981,7 @@ MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-MODULE_ALIAS("platform:sata_mv");
+MODULE_ALIAS("platform:" DRV_NAME);
 
 #ifdef CONFIG_PCI
 module_param(msi, int, 0444);