arm: omap2plus: move NAND_BLOCK_SIZE out of boards
authorIgor Grinberg <grinberg@compulab.co.il>
Mon, 30 May 2011 07:11:45 +0000 (00:11 -0700)
committerTony Lindgren <tony@atomide.com>
Wed, 1 Jun 2011 09:25:05 +0000 (02:25 -0700)
Several boards defining mtd partitions also defined NAND_BLOCK_SIZE as
SZ_128K. Move the define to common-board-devices.h

This removes multiple defines of NAND_BLOCK_SIZE.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-cm-t35.c
arch/arm/mach-omap2/board-cm-t3517.c
arch/arm/mach-omap2/board-devkit8000.c
arch/arm/mach-omap2/board-omap3beagle.c
arch/arm/mach-omap2/board-omap3pandora.c
arch/arm/mach-omap2/board-omap3touchbook.c
arch/arm/mach-omap2/board-overo.c
arch/arm/mach-omap2/common-board-devices.h

index c63115b..77456de 100644 (file)
@@ -63,8 +63,6 @@
 #define SB_T35_SMSC911X_CS     4
 #define SB_T35_SMSC911X_GPIO   65
 
-#define NAND_BLOCK_SIZE                SZ_128K
-
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
 #include <plat/gpmc-smsc911x.h>
index 30e9c6b..c3a9fd3 100644 (file)
@@ -48,6 +48,7 @@
 
 #include "mux.h"
 #include "control.h"
+#include "common-board-devices.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void)
 #endif
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#define NAND_BLOCK_SIZE                SZ_128K
-
 static struct mtd_partition cm_t3517_nand_partitions[] = {
        {
                .name           = "xloader",
index cf520d7..34956ec 100644 (file)
@@ -61,8 +61,6 @@
 #include "timer-gp.h"
 #include "common-board-devices.h"
 
-#define NAND_BLOCK_SIZE                SZ_128K
-
 #define OMAP_DM9000_GPIO_IRQ   25
 #define OMAP3_DEVKIT_TS_GPIO   27
 
index 6ef78d3..7f21d24 100644 (file)
@@ -54,8 +54,6 @@
 #include "pm.h"
 #include "common-board-devices.h"
 
-#define NAND_BLOCK_SIZE                SZ_128K
-
 /*
  * OMAP3 Beagle revision
  * Run time detection of Beagle revision is done by reading GPIO.
index 5ee034a..2a0bb48 100644 (file)
@@ -57,8 +57,6 @@
 #define PANDORA_WIFI_NRESET_GPIO       23
 #define OMAP3_PANDORA_TS_GPIO          94
 
-#define NAND_BLOCK_SIZE                        SZ_128K
-
 static struct mtd_partition omap3pandora_nand_partitions[] = {
        {
                .name           = "xloader",
index 82872d7..5f649fa 100644 (file)
@@ -56,8 +56,6 @@
 
 #include <asm/setup.h>
 
-#define NAND_BLOCK_SIZE                SZ_128K
-
 #define OMAP3_AC_GPIO          136
 #define OMAP3_TS_GPIO          162
 #define TB_BL_PWM_TIMER                9
index 9952c20..175e1ab 100644 (file)
@@ -65,8 +65,6 @@
 #define OVERO_GPIO_USBH_CPEN   168
 #define OVERO_GPIO_USBH_NRESET 183
 
-#define NAND_BLOCK_SIZE SZ_128K
-
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
 #define OVERO_SMSC911X2_CS     4
index eb80b3b..6797190 100644 (file)
@@ -1,6 +1,8 @@
 #ifndef __OMAP_COMMON_BOARD_DEVICES__
 #define __OMAP_COMMON_BOARD_DEVICES__
 
+#define NAND_BLOCK_SIZE        SZ_128K
+
 struct twl4030_platform_data;
 struct mtd_partition;