iwlwifi: remove apm_ops.stop
authorJohannes Berg <johannes.berg@intel.com>
Wed, 22 Sep 2010 16:02:10 +0000 (18:02 +0200)
committerWey-Yi Guy <wey-yi.w.guy@intel.com>
Thu, 7 Oct 2010 22:52:34 +0000 (15:52 -0700)
Since all devices share the same operation here,
there's no need to call it indirectly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
drivers/net/wireless/iwlwifi/iwl-1000.c
drivers/net/wireless/iwlwifi/iwl-3945.c
drivers/net/wireless/iwlwifi/iwl-4965.c
drivers/net/wireless/iwlwifi/iwl-5000.c
drivers/net/wireless/iwlwifi/iwl-6000.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-core.c
drivers/net/wireless/iwlwifi/iwl-core.h
drivers/net/wireless/iwlwifi/iwl-eeprom.c
drivers/net/wireless/iwlwifi/iwl3945-base.c

index 5bdfe9d..db54091 100644 (file)
@@ -194,7 +194,6 @@ static struct iwl_lib_ops iwl1000_lib = {
        .update_chain_flags = iwl_update_chain_flags,
        .apm_ops = {
                .init = iwl_apm_init,
-               .stop = iwl_apm_stop,
                .config = iwl1000_nic_config,
        },
        .eeprom_ops = {
index 824c942..b06a7bd 100644 (file)
@@ -2704,7 +2704,6 @@ static struct iwl_lib_ops iwl3945_lib = {
        .dump_nic_error_log = iwl3945_dump_nic_error_log,
        .apm_ops = {
                .init = iwl3945_apm_init,
-               .stop = iwl_apm_stop,
                .config = iwl3945_nic_config,
        },
        .eeprom_ops = {
index cda4a31..28ba563 100644 (file)
@@ -2266,7 +2266,6 @@ static struct iwl_lib_ops iwl4965_lib = {
        .set_channel_switch = iwl4965_hw_channel_switch,
        .apm_ops = {
                .init = iwl_apm_init,
-               .stop = iwl_apm_stop,
                .config = iwl4965_nic_config,
        },
        .eeprom_ops = {
index c90a16c..fd9fbc9 100644 (file)
@@ -368,7 +368,6 @@ static struct iwl_lib_ops iwl5000_lib = {
        .set_channel_switch = iwl5000_hw_channel_switch,
        .apm_ops = {
                .init = iwl_apm_init,
-               .stop = iwl_apm_stop,
                .config = iwl5000_nic_config,
        },
        .eeprom_ops = {
@@ -437,7 +436,6 @@ static struct iwl_lib_ops iwl5150_lib = {
        .set_channel_switch = iwl5000_hw_channel_switch,
        .apm_ops = {
                .init = iwl_apm_init,
-               .stop = iwl_apm_stop,
                .config = iwl5000_nic_config,
        },
        .eeprom_ops = {
index 02103a7..a45929e 100644 (file)
@@ -308,7 +308,6 @@ static struct iwl_lib_ops iwl6000_lib = {
        .set_channel_switch = iwl6000_hw_channel_switch,
        .apm_ops = {
                .init = iwl_apm_init,
-               .stop = iwl_apm_stop,
                .config = iwl6000_nic_config,
        },
        .eeprom_ops = {
@@ -380,7 +379,6 @@ static struct iwl_lib_ops iwl6000g2b_lib = {
        .set_channel_switch = iwl6000_hw_channel_switch,
        .apm_ops = {
                .init = iwl_apm_init,
-               .stop = iwl_apm_stop,
                .config = iwl6000_nic_config,
        },
        .eeprom_ops = {
index 75472a3..b1af79e 100644 (file)
@@ -2983,7 +2983,7 @@ static void __iwl_down(struct iwl_priv *priv)
        iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 
        /* Stop the device, and put it in low power state */
-       priv->cfg->ops->lib->apm_ops.stop(priv);
+       iwl_apm_stop(priv);
 
  exit:
        memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
@@ -4597,7 +4597,7 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
         * paths to avoid running iwl_down() at all before leaving driver.
         * This (inexpensive) call *makes sure* device is reset.
         */
-       priv->cfg->ops->lib->apm_ops.stop(priv);
+       iwl_apm_stop(priv);
 
        iwl_tt_exit(priv);
 
index 5cd16a7..b3efbe0 100644 (file)
@@ -2599,7 +2599,7 @@ int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
         * it will not call apm_ops.stop() to stop the DMA operation.
         * Calling apm_ops.stop here to make sure we stop the DMA.
         */
-       priv->cfg->ops->lib->apm_ops.stop(priv);
+       iwl_apm_stop(priv);
 
        pci_save_state(pdev);
        pci_disable_device(pdev);
index ae77279..c01262c 100644 (file)
@@ -117,7 +117,6 @@ struct iwl_hcmd_utils_ops {
 
 struct iwl_apm_ops {
        int (*init)(struct iwl_priv *priv);
-       void (*stop)(struct iwl_priv *priv);
        void (*config)(struct iwl_priv *priv);
 };
 
index bd51b06..66eccb1 100644 (file)
@@ -603,7 +603,7 @@ err:
        if (ret)
                iwl_eeprom_free(priv);
        /* Reset chip to save power until we load uCode during "up". */
-       priv->cfg->ops->lib->apm_ops.stop(priv);
+       iwl_apm_stop(priv);
 alloc_err:
        return ret;
 }
index c06b218..980c609 100644 (file)
@@ -2637,7 +2637,7 @@ static void __iwl3945_down(struct iwl_priv *priv)
        udelay(5);
 
        /* Stop the device, and put it in low power state */
-       priv->cfg->ops->lib->apm_ops.stop(priv);
+       iwl_apm_stop(priv);
 
  exit:
        memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
@@ -4212,7 +4212,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
         * paths to avoid running iwl_down() at all before leaving driver.
         * This (inexpensive) call *makes sure* device is reset.
         */
-       priv->cfg->ops->lib->apm_ops.stop(priv);
+       iwl_apm_stop(priv);
 
        /* make sure we flush any pending irq or
         * tasklet for the driver