x86/pci: add pci=skip_isa_align command lines.
authorYinghai Lu <yhlu.kernel.send@gmail.com>
Thu, 27 Mar 2008 08:31:18 +0000 (01:31 -0700)
committerJesse Barnes <jbarnes@virtuousgeek.org>
Mon, 5 May 2008 16:22:08 +0000 (09:22 -0700)
so we don't align the io port start address for pci cards.

also move out dmi check out acpi.c, because it has nothing to do with acpi.
it could spare some calling when we have several peer root buses.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Documentation/kernel-parameters.txt
arch/x86/pci/acpi.c
arch/x86/pci/common.c
arch/x86/pci/init.c
arch/x86/pci/pci.h

index 3ce193f..15d8216 100644 (file)
@@ -1518,6 +1518,8 @@ and is between 256 and 4096 characters. It is defined in the file
                                This is normally done in pci_enable_device(),
                                so this option is a temporary workaround
                                for broken drivers that don't call it.
+               skip_isa_align  [X86] do not align io start addr, so can
+                               handle more pci cards
                firmware        [ARM] Do not re-enumerate the bus but instead
                                just use the configuration from the
                                bootloader. This is currently used on
index 1a9c0c6..d95de2f 100644 (file)
@@ -6,45 +6,6 @@
 #include <asm/numa.h>
 #include "pci.h"
 
-static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
-{
-       pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
-       printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
-       return 0;
-}
-
-static struct dmi_system_id acpi_pciprobe_dmi_table[] __devinitdata = {
-/*
- * Systems where PCI IO resource ISA alignment can be skipped
- * when the ISA enable bit in the bridge control is not set
- */
-       {
-               .callback = can_skip_ioresource_align,
-               .ident = "IBM System x3800",
-               .matches = {
-                       DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
-                       DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
-               },
-       },
-       {
-               .callback = can_skip_ioresource_align,
-               .ident = "IBM System x3850",
-               .matches = {
-                       DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
-                       DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
-               },
-       },
-       {
-               .callback = can_skip_ioresource_align,
-               .ident = "IBM System x3950",
-               .matches = {
-                       DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
-                       DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
-               },
-       },
-       {}
-};
-
 struct pci_root_info {
        char *name;
        unsigned int res_num;
@@ -196,8 +157,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
        int pxm;
 #endif
 
-       dmi_check_system(acpi_pciprobe_dmi_table);
-
        if (domain && !pci_domains_supported) {
                printk(KERN_WARNING "PCI: Multiple domains not supported "
                       "(dom %d, bus %d)\n", domain, busnum);
index 88b5416..a6d2779 100644 (file)
@@ -90,6 +90,50 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
                rom_r->start = rom_r->end = rom_r->flags = 0;
 }
 
+static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
+{
+       pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+       printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
+       return 0;
+}
+
+static struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitdata = {
+/*
+ * Systems where PCI IO resource ISA alignment can be skipped
+ * when the ISA enable bit in the bridge control is not set
+ */
+       {
+               .callback = can_skip_ioresource_align,
+               .ident = "IBM System x3800",
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+               },
+       },
+       {
+               .callback = can_skip_ioresource_align,
+               .ident = "IBM System x3850",
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
+               },
+       },
+       {
+               .callback = can_skip_ioresource_align,
+               .ident = "IBM System x3950",
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
+               },
+       },
+       {}
+};
+
+void __init dmi_check_skip_isa_align(void)
+{
+       dmi_check_system(can_skip_pciprobe_dmi_table);
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
@@ -462,6 +506,9 @@ char * __devinit  pcibios_setup(char *str)
        } else if (!strcmp(str, "routeirq")) {
                pci_routeirq = 1;
                return NULL;
+       } else if (!strcmp(str, "skip_isa_align")) {
+               pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+               return NULL;
        }
        return str;
 }
index dd30c60..b394b2a 100644 (file)
@@ -33,6 +33,8 @@ static __init int pci_access_init(void)
                printk(KERN_ERR
                "PCI: Fatal: No config space access function found\n");
 
+       dmi_check_skip_isa_align();
+
        return 0;
 }
 arch_initcall(pci_access_init);
index c58805a..1019820 100644 (file)
@@ -38,6 +38,8 @@ enum pci_bf_sort_state {
        pci_dmi_bf,
 };
 
+extern void __init dmi_check_skip_isa_align(void);
+
 /* pci-i386.c */
 
 extern unsigned int pcibios_max_latency;