x86/PCI: use dev_printk when possible

Convert printks to use dev_printk().

I converted DBG() to dev_dbg().  This DBG() is from arch/x86/pci/pci.h and
requires source-code modification to enable, so dev_dbg() seems roughly
equivalent.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a3..4bdaa59 100644 (file)
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
                pci_read_config_byte(d, reg++, &busno);
                pci_read_config_byte(d, reg++, &suba);
                pci_read_config_byte(d, reg++, &subb);
-               DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+               dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+                       suba, subb);
                if (busno)
                        pci_scan_bus_with_sysdata(busno);       /* Bus A */
                if (suba < subb)

diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index a095058..5807d1b 100644 (file)
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,10 +128,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
                                pr = pci_find_parent_resource(dev, r);
                                if (!r->start || !pr ||
                                    request_resource(pr, r) < 0) {
-                                       printk(KERN_ERR "PCI: Cannot allocate "
-                                               "resource region %d "
-                                               "of bridge %s\n",
-                                               idx, pci_name(dev));
+                                       dev_err(&dev->dev, "BAR %d: can't "
+                                               "allocate resource\n", idx);
                                        /*
                                         * Something is wrong with the region.
                                         * Invalidate the resource to prevent
@@ -166,15 +164,15 @@ static void __init pcibios_allocate_resources(int pass)
                        else
                                disabled = !(command & PCI_COMMAND_MEMORY);
                        if (pass == disabled) {
-                               DBG("PCI: Resource %08lx-%08lx "
-                                   "(f=%lx, d=%d, p=%d)\n",
-                                   r->start, r->end, r->flags, disabled, pass);
+                               dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
+                                       "(f=%lx, d=%d, p=%d)\n",
+                                       (unsigned long long) r->start,
+                                       (unsigned long long) r->end,
+                                       r->flags, disabled, pass);
                                pr = pci_find_parent_resource(dev, r);
                                if (!pr || request_resource(pr, r) < 0) {
-                                       printk(KERN_ERR "PCI: Cannot allocate "
-                                               "resource region %d "
-                                               "of device %s\n",
-                                               idx, pci_name(dev));
+                                       dev_err(&dev->dev, "BAR %d: can't "
+                                               "allocate resource\n", idx);
                                        /* We'll assign a new address later */
                                        r->end -= r->start;
                                        r->start = 0;
@@ -187,8 +185,7 @@ static void __init pcibios_allocate_resources(int pass)
                                /* Turn the ROM off, leave the resource region,
                                 * but keep it unregistered. */
                                u32 reg;
-                               DBG("PCI: Switching off ROM of %s\n",
-                                       pci_name(dev));
+                               dev_dbg(&dev->dev, "disabling ROM\n");
                                r->flags &= ~IORESOURCE_ROM_ENABLE;
                                pci_read_config_dword(dev,
                                                dev->rom_base_reg, &reg);
@@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *dev)
                lat = pcibios_max_latency;
        else
                return;
-       printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-               pci_name(dev), lat);
+       dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
        pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 

diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 6a06a2e..fec0123 100644 (file)
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -436,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
        WARN_ON_ONCE(pirq >= 9);
        if (pirq > 8) {
-               printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+               dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
                return 0;
        }
        return read_config_nybble(router, 0x74, pirq-1);
@@ -446,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 {
        WARN_ON_ONCE(pirq >= 9);
        if (pirq > 8) {
-               printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+               dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
                return 0;
        }
        write_config_nybble(router, 0x74, pirq-1, irq);
@@ -492,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
        irq = 0;
        if (pirq <= 4)
                irq = read_config_nybble(router, 0x56, pirq - 1);
-       printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
-               dev->vendor, dev->device, pirq, irq);
+       dev_info(&dev->dev,
+                "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+                dev->vendor, dev->device, pirq, irq);
        return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-       printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
-               dev->vendor, dev->device, pirq, irq);
+       dev_info(&dev->dev,
+                "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+                dev->vendor, dev->device, pirq, irq);
        if (pirq <= 4)
                write_config_nybble(router, 0x56, pirq - 1, irq);
        return 1;
@@ -730,7 +732,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
        switch (device) {
        case PCI_DEVICE_ID_AL_M1533:
        case PCI_DEVICE_ID_AL_M1563:
-               printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
                r->name = "ALI";
                r->get = pirq_ali_get;
                r->set = pirq_ali_set;
@@ -840,11 +841,9 @@ static void __init pirq_find_router(struct irq_router *r)
                        h->probe(r, pirq_router_dev, pirq_router_dev->device))
                        break;
        }
-       printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-               pirq_router.name,
-               pirq_router_dev->vendor,
-               pirq_router_dev->device,
-               pci_name(pirq_router_dev));
+       dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+                pirq_router.name,
+                pirq_router_dev->vendor, pirq_router_dev->device);
 
        /* The device remains referenced for the kernel lifetime */
 }
@@ -877,7 +876,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
        /* Find IRQ pin */
        pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
        if (!pin) {
-               DBG(KERN_DEBUG " -> no interrupt pin\n");
+               dev_dbg(&dev->dev, "no interrupt pin\n");
                return 0;
        }
        pin = pin - 1;
@@ -887,20 +886,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
        if (!pirq_table)
                return 0;
 
-       DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
        info = pirq_get_info(dev);
        if (!info) {
-               DBG(" -> not found in routing table\n" KERN_DEBUG);
+               dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+                       'A' + pin);
                return 0;
        }
        pirq = info->irq[pin].link;
        mask = info->irq[pin].bitmap;
        if (!pirq) {
-               DBG(" -> not routed\n" KERN_DEBUG);
+               dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
                return 0;
        }
-       DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
-               pirq_table->exclusive_irqs);
+       dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+               'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
        mask &= pcibios_irq_mask;
 
        /* Work around broken HP Pavilion Notebooks which assign USB to
@@ -930,10 +929,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                if (pci_probe & PCI_USE_PIRQ_MASK)
                        newirq = 0;
                else
-                       printk("\n" KERN_WARNING
-                               "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
-                               KERN_DEBUG, newirq,
-                               pci_name(dev));
+                       dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+                                "%#x; try pci=usepirqmask\n", newirq, mask);
        }
        if (!newirq && assign) {
                for (i = 0; i < 16; i++) {
@@ -944,39 +941,35 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                                newirq = i;
                }
        }
-       DBG(" -> newirq=%d", newirq);
+       dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
 
        /* Check if it is hardcoded */
        if ((pirq & 0xf0) == 0xf0) {
                irq = pirq & 0xf;
-               DBG(" -> hardcoded IRQ %d\n", irq);
-               msg = "Hardcoded";
+               msg = "hardcoded";
        } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
        ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
-               DBG(" -> got IRQ %d\n", irq);
-               msg = "Found";
+               msg = "found";
                eisa_set_level_irq(irq);
        } else if (newirq && r->set &&
                (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-               DBG(" -> assigning IRQ %d", newirq);
                if (r->set(pirq_router_dev, dev, pirq, newirq)) {
                        eisa_set_level_irq(newirq);
-                       DBG(" ... OK\n");
-                       msg = "Assigned";
+                       msg = "assigned";
                        irq = newirq;
                }
        }
 
        if (!irq) {
-               DBG(" ... failed\n");
                if (newirq && mask == (1 << newirq)) {
-                       msg = "Guessed";
+                       msg = "guessed";
                        irq = newirq;
-               } else
+               } else {
+                       dev_dbg(&dev->dev, "can't route interrupt\n");
                        return 0;
+               }
        }
-       printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
-               pci_name(dev));
+       dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
 
        /* Update IRQ for all devices with the same pirq value */
        while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -996,17 +989,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                        (!(pci_probe & PCI_USE_PIRQ_MASK) || \
                        ((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-                               printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
-                                      pci_name(dev2), dev2->irq, irq);
+                               dev_info(&dev2->dev, "IRQ routing conflict: "
+                                        "have IRQ %d, want IRQ %d\n",
+                                        dev2->irq, irq);
 #endif
                                continue;
                        }
                        dev2->irq = irq;
                        pirq_penalty[irq]++;
                        if (dev != dev2)
-                               printk(KERN_INFO
-                                       "PCI: Sharing IRQ %d with %s\n",
-                                       irq, pci_name(dev2));
+                               dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+                                        irq, pci_name(dev2));
                }
        }
        return 1;
@@ -1025,8 +1018,7 @@ static void __init pcibios_fixup_irqs(void)
                 * already in use.
                 */
                if (dev->irq >= 16) {
-                       DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
-                               pci_name(dev), dev->irq);
+                       dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
                        dev->irq = 0;
                }
                /*
@@ -1070,12 +1062,12 @@ static void __init pcibios_fixup_irqs(void)
                                        irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
                                                        PCI_SLOT(bridge->devfn), pin);
                                        if (irq >= 0)
-                                               printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-                                                       pci_name(bridge), 'A' + pin, irq);
+                                               dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+                                                        pci_name(bridge),
+                                                        'A' + pin, irq);
                                }
                                if (irq >= 0) {
-                                       printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-                                               pci_name(dev), 'A' + pin, irq);
+                                       dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
                                        dev->irq = irq;
                                }
                        }
@@ -1231,25 +1223,24 @@ static int pirq_enable_irq(struct pci_dev *dev)
                                irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
                                                PCI_SLOT(bridge->devfn), pin);
                                if (irq >= 0)
-                                       printk(KERN_WARNING
-                                               "PCI: using PPB %s[%c] to get irq %d\n",
-                                               pci_name(bridge),
-                                               'A' + pin, irq);
+                                       dev_warn(&dev->dev, "using bridge %s "
+                                                "INT %c to get IRQ %d\n",
+                                                pci_name(bridge), 'A' + pin,
+                                                irq);
                                dev = bridge;
                        }
                        dev = temp_dev;
                        if (irq >= 0) {
-                               printk(KERN_INFO
-                                       "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-                                       pci_name(dev), 'A' + pin, irq);
+                               dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+                                        "INT %c -> IRQ %d\n", 'A' + pin, irq);
                                dev->irq = irq;
                                return 0;
                        } else
-                               msg = " Probably buggy MP table.";
+                               msg = "; probably buggy MP table";
                } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
                        msg = "";
                else
-                       msg = " Please try using pci=biosirq.";
+                       msg = "; please try using pci=biosirq";
 
                /*
                 * With IDE legacy devices the IRQ lookup failure is not
@@ -1259,9 +1250,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
                                !(dev->class & 0x5))
                        return 0;
 
-               printk(KERN_WARNING
-                       "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-                       'A' + pin, pci_name(dev), msg);
+               dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+                        'A' + pin, msg);
        }
        return 0;
 }

diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index f4b16dc..1177845 100644 (file)
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -131,13 +131,14 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
        u8 busno, suba, subb;
        int quad = BUS2QUAD(d->bus->number);
 
-       printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+       dev_info(&d->dev, "searching for i450NX host bridges\n");
        reg = 0xd0;
        for(pxb=0; pxb<2; pxb++) {
                pci_read_config_byte(d, reg++, &busno);
                pci_read_config_byte(d, reg++, &suba);
                pci_read_config_byte(d, reg++, &subb);
-               DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+               dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+                       pxb, busno, suba, subb);
                if (busno) {
                        /* Bus A */
                        pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));