Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Moxa C101 User's Manual
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/capability.h>
int result;
if (irq<3 || irq>15 || irq == 6) /* FIXME */ {
- printk(KERN_ERR "c101: invalid IRQ value\n");
+ pr_err("invalid IRQ value\n");
return -ENODEV;
}
if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) !=0) {
- printk(KERN_ERR "c101: invalid RAM value\n");
+ pr_err("invalid RAM value\n");
return -ENODEV;
}
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "c101: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
return -ENOBUFS;
}
card->dev = alloc_hdlcdev(card);
if (!card->dev) {
- printk(KERN_ERR "c101: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
kfree(card);
return -ENOBUFS;
}
if (request_irq(irq, sca_intr, 0, devname, card)) {
- printk(KERN_ERR "c101: could not allocate IRQ\n");
+ pr_err("could not allocate IRQ\n");
c101_destroy_card(card);
return -EBUSY;
}
card->irq = irq;
if (!request_mem_region(winbase, C101_MAPPED_RAM_SIZE, devname)) {
- printk(KERN_ERR "c101: could not request RAM window\n");
+ pr_err("could not request RAM window\n");
c101_destroy_card(card);
return -EBUSY;
}
card->phy_winbase = winbase;
card->win0base = ioremap(winbase, C101_MAPPED_RAM_SIZE);
if (!card->win0base) {
- printk(KERN_ERR "c101: could not map I/O address\n");
+ pr_err("could not map I/O address\n");
c101_destroy_card(card);
return -EFAULT;
}
result = register_hdlc_device(dev);
if (result) {
- printk(KERN_WARNING "c101: unable to register hdlc device\n");
+ pr_warn("unable to register hdlc device\n");
c101_destroy_card(card);
return result;
}
sca_init_port(card); /* Set up C101 memory */
set_carrier(card);
- printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
- " using %u TX + %u RX packets rings\n",
- dev->name, card->irq,
- card->tx_ring_buffers, card->rx_ring_buffers);
+ netdev_info(dev, "Moxa C101 on IRQ%u, using %u TX + %u RX packets rings\n",
+ card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
*new_card = card;
new_card = &card->next_card;
{
if (hw == NULL) {
#ifdef MODULE
- printk(KERN_INFO "c101: no card initialized\n");
+ pr_info("no card initialized\n");
#endif
return -EINVAL; /* no parameters specified, abort */
}
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
do {
unsigned long irq, ram;
return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
- printk(KERN_ERR "c101: invalid hardware parameters\n");
+ pr_err("invalid hardware parameters\n");
return first_card ? 0 : -EINVAL;
}
sca_in(DSR_RX(phy_node(port)), card), port->rxin,
sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
- printk(KERN_CONT "\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_in(DSR_TX(phy_node(port)), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port_to_card(port)->tx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
- printk("\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x, ST: %02x %02x %02x %02x,"
" FST: %02x CST: %02x %02x\n",
sca_in(DSR_RX(port->chan), card), port->rxin,
sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
- printk(KERN_CONT "\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_in(DSR_TX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->tx_ring_buffers; cnt++)
- printk(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
- printk("\n");
+ pr_cont(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
+ pr_cont("\n");
printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x,"
" ST: %02x %02x %02x %02x %02x, FST: %02x CST: %02x %02x\n",
* - proto->start() and stop() are called with spin_lock_irq held.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/errno.h>
#include <linux/hdlc.h>
#include <linux/if_arp.h>
goto carrier_exit;
if (hdlc->carrier) {
- printk(KERN_INFO "%s: Carrier detected\n", dev->name);
+ netdev_info(dev, "Carrier detected\n");
hdlc_proto_start(dev);
} else {
- printk(KERN_INFO "%s: Carrier lost\n", dev->name);
+ netdev_info(dev, "Carrier lost\n");
hdlc_proto_stop(dev);
}
spin_lock_irq(&hdlc->state_lock);
if (hdlc->carrier) {
- printk(KERN_INFO "%s: Carrier detected\n", dev->name);
+ netdev_info(dev, "Carrier detected\n");
hdlc_proto_start(dev);
} else
- printk(KERN_INFO "%s: No carrier\n", dev->name);
+ netdev_info(dev, "No carrier\n");
hdlc->open = 1;
if (size)
if ((dev_to_hdlc(dev)->state = kmalloc(size,
GFP_KERNEL)) == NULL) {
- printk(KERN_WARNING "Memory squeeze on"
- " hdlc_proto_attach()\n");
+ netdev_warn(dev,
+ "Memory squeeze on hdlc_proto_attach()\n");
module_put(proto->module);
return -ENOBUFS;
}
{
int result;
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
return result;
dev_add_pack(&hdlc_packet_type);
skb = dev_alloc_skb(sizeof(struct hdlc_header) +
sizeof(struct cisco_packet));
if (!skb) {
- printk(KERN_WARNING
- "%s: Memory squeeze on cisco_keepalive_send()\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze on cisco_keepalive_send()\n");
return;
}
skb_reserve(skb, 4);
CISCO_PACKET_LEN) &&
(skb->len != sizeof(struct hdlc_header) +
CISCO_BIG_PACKET_LEN)) {
- printk(KERN_INFO "%s: Invalid length of Cisco control"
- " packet (%d bytes)\n", dev->name, skb->len);
+ netdev_info(dev, "Invalid length of Cisco control packet (%d bytes)\n",
+ skb->len);
goto rx_error;
}
return NET_RX_SUCCESS;
case CISCO_ADDR_REPLY:
- printk(KERN_INFO "%s: Unexpected Cisco IP address "
- "reply\n", dev->name);
+ netdev_info(dev, "Unexpected Cisco IP address reply\n");
goto rx_error;
case CISCO_KEEPALIVE_REQ:
min = sec / 60; sec -= min * 60;
hrs = min / 60; min -= hrs * 60;
days = hrs / 24; hrs -= days * 24;
- printk(KERN_INFO "%s: Link up (peer "
- "uptime %ud%uh%um%us)\n",
- dev->name, days, hrs, min, sec);
+ netdev_info(dev, "Link up (peer uptime %ud%uh%um%us)\n",
+ days, hrs, min, sec);
netif_dormant_off(dev);
st->up = 1;
}
} /* switch (keepalive type) */
} /* switch (protocol) */
- printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name,
- ntohs(data->protocol));
+ netdev_info(dev, "Unsupported protocol %x\n", ntohs(data->protocol));
dev_kfree_skb_any(skb);
return NET_RX_DROP;
if (st->up &&
time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) {
st->up = 0;
- printk(KERN_INFO "%s: Link down\n", dev->name);
+ netdev_info(dev, "Link down\n");
netif_dormant_on(dev);
}
static inline void fr_log_dlci_active(pvc_device *pvc)
{
- printk(KERN_INFO "%s: DLCI %d [%s%s%s]%s %s\n",
- pvc->frad->name,
- pvc->dlci,
- pvc->main ? pvc->main->name : "",
- pvc->main && pvc->ether ? " " : "",
- pvc->ether ? pvc->ether->name : "",
- pvc->state.new ? " new" : "",
- !pvc->state.exist ? "deleted" :
- pvc->state.active ? "active" : "inactive");
+ netdev_info(pvc->frad, "DLCI %d [%s%s%s]%s %s\n",
+ pvc->dlci,
+ pvc->main ? pvc->main->name : "",
+ pvc->main && pvc->ether ? " " : "",
+ pvc->ether ? pvc->ether->name : "",
+ pvc->state.new ? " new" : "",
+ !pvc->state.exist ? "deleted" :
+ pvc->state.active ? "active" : "inactive");
}
if (dce && fullrep) {
len += state(hdlc)->dce_pvc_count * (2 + stat_len);
if (len > HDLC_MAX_MRU) {
- printk(KERN_WARNING "%s: Too many PVCs while sending "
- "LMI full report\n", dev->name);
+ netdev_warn(dev, "Too many PVCs while sending LMI full report\n");
return;
}
}
skb = dev_alloc_skb(len);
if (!skb) {
- printk(KERN_WARNING "%s: Memory squeeze on fr_lmi_send()\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze on fr_lmi_send()\n");
return;
}
memset(skb->data, 0, len);
state(hdlc)->last_errors <<= 1; /* Shift the list */
if (state(hdlc)->request) {
if (state(hdlc)->reliable)
- printk(KERN_INFO "%s: No LMI status reply "
- "received\n", dev->name);
+ netdev_info(dev, "No LMI status reply received\n");
state(hdlc)->last_errors |= 1;
}
}
if (state(hdlc)->reliable != reliable) {
- printk(KERN_INFO "%s: Link %sreliable\n", dev->name,
- reliable ? "" : "un");
+ netdev_info(dev, "Link %sreliable\n", reliable ? "" : "un");
fr_set_link_state(reliable, dev);
}
if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH :
LMI_CCITT_CISCO_LENGTH)) {
- printk(KERN_INFO "%s: Short LMI frame\n", dev->name);
+ netdev_info(dev, "Short LMI frame\n");
return 1;
}
if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI :
NLPID_CCITT_ANSI_LMI)) {
- printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n",
- dev->name);
+ netdev_info(dev, "Received non-LMI frame with LMI DLCI\n");
return 1;
}
if (skb->data[4] != LMI_CALLREF) {
- printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n",
- dev->name, skb->data[4]);
+ netdev_info(dev, "Invalid LMI Call reference (0x%02X)\n",
+ skb->data[4]);
return 1;
}
if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) {
- printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n",
- dev->name, skb->data[5]);
+ netdev_info(dev, "Invalid LMI Message type (0x%02X)\n",
+ skb->data[5]);
return 1;
}
if (lmi == LMI_ANSI) {
if (skb->data[6] != LMI_ANSI_LOCKSHIFT) {
- printk(KERN_INFO "%s: Not ANSI locking shift in LMI"
- " message (0x%02X)\n", dev->name, skb->data[6]);
+ netdev_info(dev, "Not ANSI locking shift in LMI message (0x%02X)\n",
+ skb->data[6]);
return 1;
}
i = 7;
if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE :
LMI_ANSI_CISCO_REPTYPE)) {
- printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n",
- dev->name, skb->data[i]);
+ netdev_info(dev, "Not an LMI Report type IE (0x%02X)\n",
+ skb->data[i]);
return 1;
}
if (skb->data[++i] != LMI_REPT_LEN) {
- printk(KERN_INFO "%s: Invalid LMI Report type IE length"
- " (%u)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Invalid LMI Report type IE length (%u)\n",
+ skb->data[i]);
return 1;
}
reptype = skb->data[++i];
if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) {
- printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n",
- dev->name, reptype);
+ netdev_info(dev, "Unsupported LMI Report type (0x%02X)\n",
+ reptype);
return 1;
}
if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE :
LMI_ANSI_CISCO_ALIVE)) {
- printk(KERN_INFO "%s: Not an LMI Link integrity verification"
- " IE (0x%02X)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Not an LMI Link integrity verification IE (0x%02X)\n",
+ skb->data[i]);
return 1;
}
if (skb->data[++i] != LMI_INTEG_LEN) {
- printk(KERN_INFO "%s: Invalid LMI Link integrity verification"
- " IE length (%u)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Invalid LMI Link integrity verification IE length (%u)\n",
+ skb->data[i]);
return 1;
}
i++;
if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT :
LMI_ANSI_CISCO_PVCSTAT)) {
- printk(KERN_INFO "%s: Not an LMI PVC status IE"
- " (0x%02X)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Not an LMI PVC status IE (0x%02X)\n",
+ skb->data[i]);
return 1;
}
if (skb->data[++i] != stat_len) {
- printk(KERN_INFO "%s: Invalid LMI PVC status IE length"
- " (%u)\n", dev->name, skb->data[i]);
+ netdev_info(dev, "Invalid LMI PVC status IE length (%u)\n",
+ skb->data[i]);
return 1;
}
i++;
pvc = add_pvc(dev, dlci);
if (!pvc && !no_ram) {
- printk(KERN_WARNING
- "%s: Memory squeeze on fr_lmi_recv()\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze on fr_lmi_recv()\n");
no_ram = 1;
}
pvc = find_pvc(hdlc, dlci);
if (!pvc) {
#ifdef DEBUG_PKT
- printk(KERN_INFO "%s: No PVC for received frame's DLCI %d\n",
- frad->name, dlci);
+ netdev_info(frad, "No PVC for received frame's DLCI %d\n",
+ dlci);
#endif
dev_kfree_skb_any(skb);
return NET_RX_DROP;
break;
default:
- printk(KERN_INFO "%s: Unsupported protocol, OUI=%x "
- "PID=%x\n", frad->name, oui, pid);
+ netdev_info(frad, "Unsupported protocol, OUI=%x PID=%x\n",
+ oui, pid);
dev_kfree_skb_any(skb);
return NET_RX_DROP;
}
} else {
- printk(KERN_INFO "%s: Unsupported protocol, NLPID=%x "
- "length = %i\n", frad->name, data[3], skb->len);
+ netdev_info(frad, "Unsupported protocol, NLPID=%x length=%i\n",
+ data[3], skb->len);
dev_kfree_skb_any(skb);
return NET_RX_DROP;
}
int used;
if ((pvc = add_pvc(frad, dlci)) == NULL) {
- printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n",
- frad->name);
+ netdev_warn(frad, "Memory squeeze on fr_add_pvc()\n");
return -ENOBUFS;
}
dev = alloc_netdev(0, "pvc%d", pvc_setup);
if (!dev) {
- printk(KERN_WARNING "%s: Memory squeeze on fr_pvc()\n",
- frad->name);
+ netdev_warn(frad, "Memory squeeze on fr_pvc()\n");
delete_unused_pvcs(hdlc);
return -ENOBUFS;
}
skb = dev_alloc_skb(sizeof(struct hdlc_header) +
sizeof(struct cp_header) + magic_len + len);
if (!skb) {
- printk(KERN_WARNING "%s: out of memory in ppp_tx_cp()\n",
- dev->name);
+ netdev_warn(dev, "out of memory in ppp_tx_cp()\n");
return;
}
skb_reserve(skb, sizeof(struct hdlc_header));
ppp_tx_cp(dev, pid, CP_CODE_REJ, ++ppp->seq, len, data);
if (old_state != OPENED && proto->state == OPENED) {
- printk(KERN_INFO "%s: %s up\n", dev->name, proto_name(pid));
+ netdev_info(dev, "%s up\n", proto_name(pid));
if (pid == PID_LCP) {
netif_dormant_off(dev);
ppp_cp_event(dev, PID_IPCP, START, 0, 0, 0, NULL);
}
}
if (old_state == OPENED && proto->state != OPENED) {
- printk(KERN_INFO "%s: %s down\n", dev->name, proto_name(pid));
+ netdev_info(dev, "%s down\n", proto_name(pid));
if (pid == PID_LCP) {
netif_dormant_on(dev);
ppp_cp_event(dev, PID_IPCP, STOP, 0, 0, 0, NULL);
break;
if (time_after(jiffies, ppp->last_pong +
ppp->keepalive_timeout * HZ)) {
- printk(KERN_INFO "%s: Link down\n", proto->dev->name);
+ netdev_info(proto->dev, "Link down\n");
ppp_cp_event(proto->dev, PID_LCP, STOP, 0, 0, 0, NULL);
ppp_cp_event(proto->dev, PID_LCP, START, 0, 0, 0, NULL);
} else { /* send keep-alive packet */
unsigned char *ptr;
if ((skb = dev_alloc_skb(1)) == NULL) {
- printk(KERN_ERR "%s: out of memory\n", dev->name);
+ netdev_err(dev, "out of memory\n");
return;
}
/* Send connect confirm. msg to level 3 */
x25_connected(dev, 0);
else
- printk(KERN_ERR "%s: LAPB connect request "
- "failed, error code = %i\n",
- dev->name, result);
+ netdev_err(dev, "LAPB connect request failed, error code = %i\n",
+ result);
}
break;
/* Send disconnect confirm. msg to level 3 */
x25_disconnected(dev, 0);
else
- printk(KERN_ERR "%s: LAPB disconnect request "
- "failed, error code = %i\n",
- dev->name, result);
+ netdev_err(dev, "LAPB disconnect request failed, error code = %i\n",
+ result);
}
break;
* SDL Inc. PPP/HDLC/CISCO driver
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/capability.h>
int i;
if (io < 0x200 || io > 0x3FF || (io % N2_IOPORTS) != 0) {
- printk(KERN_ERR "n2: invalid I/O port value\n");
+ pr_err("invalid I/O port value\n");
return -ENODEV;
}
if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
- printk(KERN_ERR "n2: invalid IRQ value\n");
+ pr_err("invalid IRQ value\n");
return -ENODEV;
}
if (winbase < 0xA0000 || winbase > 0xFFFFF || (winbase & 0xFFF) != 0) {
- printk(KERN_ERR "n2: invalid RAM value\n");
+ pr_err("invalid RAM value\n");
return -ENODEV;
}
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "n2: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
return -ENOBUFS;
}
card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
if (!card->ports[0].dev || !card->ports[1].dev) {
- printk(KERN_ERR "n2: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
n2_destroy_card(card);
return -ENOMEM;
}
if (!request_region(io, N2_IOPORTS, devname)) {
- printk(KERN_ERR "n2: I/O port region in use\n");
+ pr_err("I/O port region in use\n");
n2_destroy_card(card);
return -EBUSY;
}
card->io = io;
if (request_irq(irq, sca_intr, 0, devname, card)) {
- printk(KERN_ERR "n2: could not allocate IRQ\n");
+ pr_err("could not allocate IRQ\n");
n2_destroy_card(card);
return -EBUSY;
}
card->irq = irq;
if (!request_mem_region(winbase, USE_WINDOWSIZE, devname)) {
- printk(KERN_ERR "n2: could not request RAM window\n");
+ pr_err("could not request RAM window\n");
n2_destroy_card(card);
return -EBUSY;
}
card->phy_winbase = winbase;
card->winbase = ioremap(winbase, USE_WINDOWSIZE);
if (!card->winbase) {
- printk(KERN_ERR "n2: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
n2_destroy_card(card);
return -EFAULT;
}
break;
default:
- printk(KERN_ERR "n2: invalid window size\n");
+ pr_err("invalid window size\n");
n2_destroy_card(card);
return -ENODEV;
}
card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
(card->tx_ring_buffers + card->rx_ring_buffers);
- printk(KERN_INFO "n2: RISCom/N2 %u KB RAM, IRQ%u, "
- "using %u TX + %u RX packets rings\n", card->ram_size / 1024,
- card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+ pr_info("RISCom/N2 %u KB RAM, IRQ%u, using %u TX + %u RX packets rings\n",
+ card->ram_size / 1024, card->irq,
+ card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
- printk(KERN_ERR "n2: RAM test failed\n");
+ pr_err("RAM test failed\n");
n2_destroy_card(card);
return -EIO;
}
port->card = card;
if (register_hdlc_device(dev)) {
- printk(KERN_WARNING "n2: unable to register hdlc "
- "device\n");
+ pr_warn("unable to register hdlc device\n");
port->card = NULL;
n2_destroy_card(card);
return -ENOBUFS;
}
sca_init_port(port); /* Set up SCA memory */
- printk(KERN_INFO "%s: RISCom/N2 node %d\n",
- dev->name, port->phy_node);
+ netdev_info(dev, "RISCom/N2 node %d\n", port->phy_node);
}
*new_card = card;
{
if (hw==NULL) {
#ifdef MODULE
- printk(KERN_INFO "n2: no card initialized\n");
+ pr_info("no card initialized\n");
#endif
return -EINVAL; /* no parameters specified, abort */
}
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
do {
unsigned long io, irq, ram;
return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
- printk(KERN_ERR "n2: invalid hardware parameters\n");
+ pr_err("invalid hardware parameters\n");
return first_card ? 0 : -EINVAL;
}
* PC300/X21 cards.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
- printk(KERN_ERR "pc300: invalid card EEPROM parameters\n");
+ pr_err("invalid card EEPROM parameters\n");
pc300_pci_remove_one(pdev);
return -EFAULT;
}
if (card->plxbase == NULL ||
card->scabase == NULL ||
card->rambase == NULL) {
- printk(KERN_ERR "pc300: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
pc300_pci_remove_one(pdev);
}
for (i = 0; i < card->n_ports; i++)
if (!(card->ports[i].netdev = alloc_hdlcdev(&card->ports[i]))) {
- printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pc300_pci_remove_one(pdev);
return -ENOMEM;
}
card->buff_offset = card->n_ports * sizeof(pkt_desc) *
(card->tx_ring_buffers + card->rx_ring_buffers);
- printk(KERN_INFO "pc300: PC300/%s, %u KB RAM at 0x%x, IRQ%u, "
- "using %u TX + %u RX packets rings\n",
- card->type == PC300_X21 ? "X21" :
- card->type == PC300_TE ? "TE" : "RSV",
- ramsize / 1024, ramphys, pdev->irq,
- card->tx_ring_buffers, card->rx_ring_buffers);
+ pr_info("PC300/%s, %u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
+ card->type == PC300_X21 ? "X21" :
+ card->type == PC300_TE ? "TE" : "RSV",
+ ramsize / 1024, ramphys, pdev->irq,
+ card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
- printk(KERN_ERR "pc300: RAM test failed\n");
+ pr_err("RAM test failed\n");
pc300_pci_remove_one(pdev);
return -EFAULT;
}
/* Allocate IRQ */
if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pc300", card)) {
- printk(KERN_WARNING "pc300: could not allocate IRQ%d.\n",
- pdev->irq);
+ pr_warn("could not allocate IRQ%d\n", pdev->irq);
pc300_pci_remove_one(pdev);
return -EBUSY;
}
sca_init_port(port);
if (register_hdlc_device(dev)) {
- printk(KERN_ERR "pc300: unable to register hdlc "
- "device\n");
+ pr_err("unable to register hdlc device\n");
port->card = NULL;
pc300_pci_remove_one(pdev);
return -ENOBUFS;
}
- printk(KERN_INFO "%s: PC300 channel %d\n",
- dev->name, port->chan);
+ netdev_info(dev, "PC300 channel %d\n", port->chan);
}
return 0;
}
static int __init pc300_init_module(void)
{
if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
- printk(KERN_ERR "pc300: Invalid PCI clock frequency\n");
+ pr_err("Invalid PCI clock frequency\n");
return -EINVAL;
}
if (use_crystal_clock != 0 && use_crystal_clock != 1) {
- printk(KERN_ERR "pc300: Invalid 'use_crystal_clock' value\n");
+ pr_err("Invalid 'use_crystal_clock' value\n");
return -EINVAL;
}
* PLX Technology Inc. PCI9052 Data Book
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/capability.h>
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "pci200syn: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]);
card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]);
if (!card->ports[0].netdev || !card->ports[1].netdev) {
- printk(KERN_ERR "pci200syn: unable to allocate memory\n");
+ pr_err("unable to allocate memory\n");
pci200_pci_remove_one(pdev);
return -ENOMEM;
}
if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
- printk(KERN_ERR "pci200syn: invalid card EEPROM parameters\n");
+ pr_err("invalid card EEPROM parameters\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
if (card->plxbase == NULL ||
card->scabase == NULL ||
card->rambase == NULL) {
- printk(KERN_ERR "pci200syn: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
card->rx_ring_buffers);
- printk(KERN_INFO "pci200syn: %u KB RAM at 0x%x, IRQ%u, using %u TX +"
- " %u RX packets rings\n", ramsize / 1024, ramphys,
- pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+ pr_info("%u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
+ ramsize / 1024, ramphys,
+ pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
- printk(KERN_ERR "pci200syn: RAM test failed\n");
+ pr_err("RAM test failed\n");
pci200_pci_remove_one(pdev);
return -EFAULT;
}
/* Allocate IRQ */
if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) {
- printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
- pdev->irq);
+ pr_warn("could not allocate IRQ%d\n", pdev->irq);
pci200_pci_remove_one(pdev);
return -EBUSY;
}
port->card = card;
sca_init_port(port);
if (register_hdlc_device(dev)) {
- printk(KERN_ERR "pci200syn: unable to register hdlc "
- "device\n");
+ pr_err("unable to register hdlc device\n");
port->card = NULL;
pci200_pci_remove_one(pdev);
return -ENOBUFS;
}
- printk(KERN_INFO "%s: PCI200SYN channel %d\n",
- dev->name, port->chan);
+ netdev_info(dev, "PCI200SYN channel %d\n", port->chan);
}
sca_flush(card);
static int __init pci200_init_module(void)
{
if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
- printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n");
+ pr_err("Invalid PCI clock frequency\n");
return -EINVAL;
}
return pci_register_driver(&pci200_pci_driver);
* - wanXL100 will require minor driver modifications, no access to hw
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
{
dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
if (addr + size > 0x100000000LL)
- printk(KERN_CRIT "wanXL %s: pci_map_single() returned memory"
- " at 0x%LX!\n", pci_name(pdev),
- (unsigned long long)addr);
+ pr_crit("%s: pci_map_single() returned memory at 0x%llx!\n",
+ pci_name(pdev), (unsigned long long)addr);
return addr;
}
}
dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE";
}
- printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
- port->dev->name, pm, dte, cable, dsr, dcd);
+ netdev_info(port->dev, "%s%s module, %s cable%s%s\n",
+ pm, dte, cable, dsr, dcd);
if (value & STATUS_CABLE_DCD)
netif_carrier_on(port->dev);
while (desc = &card->status->rx_descs[card->rx_in],
desc->stat != PACKET_EMPTY) {
if ((desc->stat & PACKET_PORT_MASK) > card->n_ports)
- printk(KERN_CRIT "wanXL %s: received packet for"
- " nonexistent port\n", pci_name(card->pdev));
+ pr_crit("%s: received packet for nonexistent port\n",
+ pci_name(card->pdev));
else {
struct sk_buff *skb = card->rx_skbs[card->rx_in];
port_t *port = &card->ports[desc->stat &
int i;
if (get_status(port)->open) {
- printk(KERN_ERR "%s: port already open\n", dev->name);
+ netdev_err(dev, "port already open\n");
return -EIO;
}
if ((i = hdlc_open(dev)) != 0)
}
} while (time_after(timeout, jiffies));
- printk(KERN_ERR "%s: unable to open port\n", dev->name);
+ netdev_err(dev, "unable to open port\n");
/* ask the card to close the port, should it be still alive */
writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr);
return -EFAULT;
} while (time_after(timeout, jiffies));
if (get_status(port)->open)
- printk(KERN_ERR "%s: unable to close port\n", dev->name);
+ netdev_err(dev, "unable to close port\n");
netif_stop_queue(dev);
int i, ports, alloc_size;
#ifndef MODULE
- static int printed_version;
- if (!printed_version) {
- printed_version++;
- printk(KERN_INFO "%s\n", version);
- }
+ pr_info_once("%s\n", version);
#endif
i = pci_enable_device(pdev);
work on most platforms */
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
- printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+ pr_err("No usable DMA configuration\n");
return -EIO;
}
alloc_size = sizeof(card_t) + ports * sizeof(port_t);
card = kzalloc(alloc_size, GFP_KERNEL);
if (card == NULL) {
- printk(KERN_ERR "wanXL %s: unable to allocate memory\n",
- pci_name(pdev));
+ pr_err("%s: unable to allocate memory\n", pci_name(pdev));
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
to indicate the card can do 32-bit DMA addressing */
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) ||
pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+ pr_err("No usable DMA configuration\n");
wanxl_pci_remove_one(pdev);
return -EIO;
}
card->plx = ioremap_nocache(plx_phy, 0x70);
if (!card->plx) {
- printk(KERN_ERR "wanxl: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
wanxl_pci_remove_one(pdev);
return -EFAULT;
}
timeout = jiffies + 20 * HZ;
while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
if (time_before(timeout, jiffies)) {
- printk(KERN_WARNING "wanXL %s: timeout waiting for"
- " PUTS to complete\n", pci_name(pdev));
+ pr_warn("%s: timeout waiting for PUTS to complete\n",
+ pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
break;
default:
- printk(KERN_WARNING "wanXL %s: PUTS test 0x%X"
- " failed\n", pci_name(pdev), stat & 0x30);
+ pr_warn("%s: PUTS test 0x%X failed\n",
+ pci_name(pdev), stat & 0x30);
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
/* sanity check the board's reported memory size */
if (ramsize < BUFFERS_ADDR +
(TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
- printk(KERN_WARNING "wanXL %s: no enough on-board RAM"
- " (%u bytes detected, %u bytes required)\n",
- pci_name(pdev), ramsize, BUFFERS_ADDR +
- (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
+ pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n",
+ pci_name(pdev), ramsize,
+ BUFFERS_ADDR +
+ (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
- printk(KERN_WARNING "wanXL %s: unable to Set Byte Swap"
- " Mode\n", pci_name(pdev));
+ pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
mem = ioremap_nocache(mem_phy, PDM_OFFSET + sizeof(firmware));
if (!mem) {
- printk(KERN_ERR "wanxl: ioremap() failed\n");
+ pr_err("ioremap() failed\n");
wanxl_pci_remove_one(pdev);
return -EFAULT;
}
writel(0, card->plx + PLX_MAILBOX_5);
if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
- printk(KERN_WARNING "wanXL %s: unable to Abort and Jump\n",
- pci_name(pdev));
+ pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
}while (time_after(timeout, jiffies));
if (!stat) {
- printk(KERN_WARNING "wanXL %s: timeout while initializing card "
- "firmware\n", pci_name(pdev));
+ pr_warn("%s: timeout while initializing card firmware\n",
+ pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
ramsize = stat;
#endif
- printk(KERN_INFO "wanXL %s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
- pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
+ pr_info("%s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
+ pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
/* Allocate IRQ */
if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) {
- printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
- pci_name(pdev), pdev->irq);
+ pr_warn("%s: could not allocate IRQ%i\n",
+ pci_name(pdev), pdev->irq);
wanxl_pci_remove_one(pdev);
return -EBUSY;
}
port_t *port = &card->ports[i];
struct net_device *dev = alloc_hdlcdev(port);
if (!dev) {
- printk(KERN_ERR "wanXL %s: unable to allocate"
- " memory\n", pci_name(pdev));
+ pr_err("%s: unable to allocate memory\n",
+ pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENOMEM;
}
port->node = i;
get_status(port)->clocking = CLOCK_EXT;
if (register_hdlc_device(dev)) {
- printk(KERN_ERR "wanXL %s: unable to register hdlc"
- " device\n", pci_name(pdev));
+ pr_err("%s: unable to register hdlc device\n",
+ pci_name(pdev));
free_netdev(dev);
wanxl_pci_remove_one(pdev);
return -ENOBUFS;
card->n_ports++;
}
- printk(KERN_INFO "wanXL %s: port", pci_name(pdev));
+ pr_info("%s: port", pci_name(pdev));
for (i = 0; i < ports; i++)
- printk("%s #%i: %s", i ? "," : "", i,
- card->ports[i].dev->name);
- printk("\n");
+ pr_cont("%s #%i: %s",
+ i ? "," : "", i, card->ports[i].dev->name);
+ pr_cont("\n");
for (i = 0; i < ports; i++)
wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/
static int __init wanxl_init_module(void)
{
#ifdef MODULE
- printk(KERN_INFO "%s\n", version);
+ pr_info("%s\n", version);
#endif
return pci_register_driver(&wanxl_pci_driver);
}
git.openpandora.org / pandora-kernel.git / commitdiff