ARM: dts: Update Nanobone dts file

Update dts file to reflect:-
* new flash memory layout
* add missing phy-mode property
* dual_emac now just a boolean
* rename mcp to microchip
* update gpio definition

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index a346645..5ed4ca6 100644 (file)
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -213,7 +213,9 @@
        pinctrl-0 = <&i2c0_pins>;
 
        gpio@20 {
-               compatible = "mcp,mcp23017";
+               compatible = "microchip,mcp23017";
+               gpio-controller;
+               #gpio-cells = <2>;
                reg = <0x20>;
        };
 
@@ -222,7 +224,7 @@
        };
 
        eeprom@53 {
-               compatible = "mcp,24c02";
+               compatible = "microchip,24c02";
                reg = <0x53>;
                pagesize = <8>;
        };
@@ -297,8 +299,8 @@
                |            |-->0x004FFFFF-> Kernel end
                |            |-->0x00500000-> File system start
                |            |
-               |            |-->0x014FFFFF-> File system end
-               |            |-->0x01500000-> User data start
+               |            |-->0x01FFFFFF-> File system end
+               |            |-->0x02000000-> User data start
                |            |
                |            |-->0x03FFFFFF-> User data end
                |            |-->0x04000000-> Data storage start
@@ -327,12 +329,12 @@
 
                partition@4 {
                        label = "rootfs";
-                       reg = <0x00500000 0x01000000>; /* 16MB */
+                       reg = <0x00500000 0x01b00000>; /* 27MB */
                };
 
                partition@5 {
                        label = "user";
-                       reg = <0x01500000 0x02b00000>; /* 43MB */
+                       reg = <0x02000000 0x02000000>; /* 32MB */
                };
 
                partition@6 {
@@ -343,7 +345,7 @@
 };
 
 &mac {
-       dual_emac = <1>;
+       dual_emac;
        status = "okay";
 };
 
@@ -353,11 +355,13 @@
 
 &cpsw_emac0 {
        phy_id = <&davinci_mdio>, <0>;
+       phy-mode = "mii";
        dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
        phy_id = <&davinci_mdio>, <1>;
+       phy-mode = "mii";
        dual_emac_res_vlan = <2>;
 };