+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
-#
-CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
-# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-CONFIG_NEC_OSPREY=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_VR4181=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_PREEMPT is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0"
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+++ /dev/null
-#
-# Makefile for common code of NEC vr4181 based boards
-#
-
-obj-y := irq.o int_handler.o serial.o time.o
-
-EXTRA_AFLAGS := $(CFLAGS)
+++ /dev/null
-/*
- * arch/mips/vr4181/common/int_handler.S
- *
- * Adapted to the VR4181 and almost entirely rewritten:
- * Copyright (C) 1999 Bradley D. LaRonde and Michael Klar
- *
- * Clean up to conform to the new IRQ
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-
-#include <asm/vr4181/vr4181.h>
-
-/*
- * [jsun]
- * See include/asm/vr4181/irq.h for IRQ assignment and strategy.
- */
-
- .text
- .set noreorder
-
- .align 5
- NESTED(vr4181_handle_irq, PT_SIZE, ra)
-
- .set noat
- SAVE_ALL
- CLI
-
- .set at
- .set noreorder
-
- mfc0 t0, CP0_CAUSE
- mfc0 t2, CP0_STATUS
-
- and t0, t2
-
- /* we check IP3 first; it happens most frequently */
- andi t1, t0, STATUSF_IP3
- bnez t1, ll_cpu_ip3
- andi t1, t0, STATUSF_IP2
- bnez t1, ll_cpu_ip2
- andi t1, t0, STATUSF_IP7 /* cpu timer */
- bnez t1, ll_cputimer_irq
- andi t1, t0, STATUSF_IP4
- bnez t1, ll_cpu_ip4
- andi t1, t0, STATUSF_IP5
- bnez t1, ll_cpu_ip5
- andi t1, t0, STATUSF_IP6
- bnez t1, ll_cpu_ip6
- andi t1, t0, STATUSF_IP0 /* software int 0 */
- bnez t1, ll_cpu_ip0
- andi t1, t0, STATUSF_IP1 /* software int 1 */
- bnez t1, ll_cpu_ip1
- nop
-
- .set reorder
-do_spurious:
- j spurious_interrupt
-
-/*
- * regular CPU irqs
- */
-ll_cputimer_irq:
- li a0, VR4181_IRQ_TIMER
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-
-ll_cpu_ip0:
- li a0, VR4181_IRQ_SW1
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip1:
- li a0, VR4181_IRQ_SW2
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip3:
- li a0, VR4181_IRQ_INT1
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip4:
- li a0, VR4181_IRQ_INT2
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip5:
- li a0, VR4181_IRQ_INT3
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip6:
- li a0, VR4181_IRQ_INT4
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-/*
- * One of the sys irq has happend.
- *
- * In the interest of speed, we first determine in the following order
- * which 16-irq block have pending interrupts:
- * sysint1 (16 sources, including cascading intrs from GPIO)
- * sysint2
- * gpio (16 intr sources)
- *
- * Then we do binary search to find the exact interrupt source.
- */
-ll_cpu_ip2:
-
- lui t3,%hi(VR4181_SYSINT1REG)
- lhu t0,%lo(VR4181_SYSINT1REG)(t3)
- lhu t2,%lo(VR4181_MSYSINT1REG)(t3)
- and t0, 0xfffb /* hack - remove RTC Long 1 intr */
- and t0, t2
- beqz t0, check_sysint2
-
- /* check for GPIO interrupts */
- andi t1, t0, 0x0100
- bnez t1, check_gpio_int
-
- /* so we have an interrupt in sysint1 which is not gpio int */
- li a0, VR4181_SYS_IRQ_BASE - 1
- j check_16
-
-check_sysint2:
-
- lhu t0,%lo(VR4181_SYSINT2REG)(t3)
- lhu t2,%lo(VR4181_MSYSINT2REG)(t3)
- and t0, 0xfffe /* hack - remove RTC Long 2 intr */
- and t0, t2
- li a0, VR4181_SYS_IRQ_BASE + 16 - 1
- j check_16
-
-check_gpio_int:
- lui t3,%hi(VR4181_GPINTMSK)
- lhu t0,%lo(VR4181_GPINTMSK)(t3)
- lhu t2,%lo(VR4181_GPINTSTAT)(t3)
- xori t0, 0xffff /* why? reverse logic? */
- and t0, t2
- li a0, VR4181_GPIO_IRQ_BASE - 1
- j check_16
-
-/*
- * When we reach check_16, we have 16-bit status in t0 and base irq number
- * in a0.
- */
-check_16:
- andi t1, t0, 0xff
- bnez t1, check_8
-
- srl t0, 8
- addi a0, 8
- j check_8
-
-/*
- * When we reach check_8, we have 8-bit status in t0 and base irq number
- * in a0.
- */
-check_8:
- andi t1, t0, 0xf
- bnez t1, check_4
-
- srl t0, 4
- addi a0, 4
- j check_4
-
-/*
- * When we reach check_4, we have 4-bit status in t0 and base irq number
- * in a0.
- */
-check_4:
- andi t0, t0, 0xf
- beqz t0, do_spurious
-
-loop:
- andi t2, t0, 0x1
- srl t0, 1
- addi a0, 1
- beqz t2, loop
-
-found_it:
- move a1, sp
- jal do_IRQ
-
- j ret_from_irq
-
- END(vr4181_handle_irq)
+++ /dev/null
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * linux/arch/mips/vr4181/common/irq.c
- * Completely re-written to use the new irq.c
- *
- * Credits to Bradley D. LaRonde and Michael Klar for writing the original
- * irq.c file which was derived from the common irq.c file.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/gdb-stub.h>
-
-#include <asm/vr4181/vr4181.h>
-
-/*
- * Strategy:
- *
- * We essentially have three irq controllers, CPU, system, and gpio.
- *
- * CPU irq controller is taken care by arch/mips/kernel/irq_cpu.c and
- * CONFIG_IRQ_CPU config option.
- *
- * We here provide sys_irq and gpio_irq controller code.
- */
-
-static int sys_irq_base;
-static int gpio_irq_base;
-
-/* ---------------------- sys irq ------------------------ */
-static void
-sys_irq_enable(unsigned int irq)
-{
- irq -= sys_irq_base;
- if (irq < 16) {
- *VR4181_MSYSINT1REG |= (u16)(1 << irq);
- } else {
- irq -= 16;
- *VR4181_MSYSINT2REG |= (u16)(1 << irq);
- }
-}
-
-static void
-sys_irq_disable(unsigned int irq)
-{
- irq -= sys_irq_base;
- if (irq < 16) {
- *VR4181_MSYSINT1REG &= ~((u16)(1 << irq));
- } else {
- irq -= 16;
- *VR4181_MSYSINT2REG &= ~((u16)(1 << irq));
- }
-
-}
-
-static unsigned int
-sys_irq_startup(unsigned int irq)
-{
- sys_irq_enable(irq);
- return 0;
-}
-
-#define sys_irq_shutdown sys_irq_disable
-#define sys_irq_ack sys_irq_disable
-
-static void
-sys_irq_end(unsigned int irq)
-{
- if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- sys_irq_enable(irq);
-}
-
-static hw_irq_controller sys_irq_controller = {
- "vr4181_sys_irq",
- sys_irq_startup,
- sys_irq_shutdown,
- sys_irq_enable,
- sys_irq_disable,
- sys_irq_ack,
- sys_irq_end,
- NULL /* no affinity stuff for UP */
-};
-
-/* ---------------------- gpio irq ------------------------ */
-/* gpio irq lines use reverse logic */
-static void
-gpio_irq_enable(unsigned int irq)
-{
- irq -= gpio_irq_base;
- *VR4181_GPINTMSK &= ~((u16)(1 << irq));
-}
-
-static void
-gpio_irq_disable(unsigned int irq)
-{
- irq -= gpio_irq_base;
- *VR4181_GPINTMSK |= (u16)(1 << irq);
-}
-
-static unsigned int
-gpio_irq_startup(unsigned int irq)
-{
- gpio_irq_enable(irq);
-
- irq -= gpio_irq_base;
- *VR4181_GPINTEN |= (u16)(1 << irq );
-
- return 0;
-}
-
-static void
-gpio_irq_shutdown(unsigned int irq)
-{
- gpio_irq_disable(irq);
-
- irq -= gpio_irq_base;
- *VR4181_GPINTEN &= ~((u16)(1 << irq ));
-}
-
-static void
-gpio_irq_ack(unsigned int irq)
-{
- u16 irqtype;
- u16 irqshift;
-
- gpio_irq_disable(irq);
-
- /* we clear interrupt if it is edge triggered */
- irq -= gpio_irq_base;
- if (irq < 8) {
- irqtype = *VR4181_GPINTTYPL;
- irqshift = 2 << (irq*2);
- } else {
- irqtype = *VR4181_GPINTTYPH;
- irqshift = 2 << ((irq-8)*2);
- }
- if ( ! (irqtype & irqshift) ) {
- *VR4181_GPINTSTAT = (u16) (1 << irq);
- }
-}
-
-static void
-gpio_irq_end(unsigned int irq)
-{
- if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- gpio_irq_enable(irq);
-}
-
-static hw_irq_controller gpio_irq_controller = {
- "vr4181_gpio_irq",
- gpio_irq_startup,
- gpio_irq_shutdown,
- gpio_irq_enable,
- gpio_irq_disable,
- gpio_irq_ack,
- gpio_irq_end,
- NULL /* no affinity stuff for UP */
-};
-
-/* --------------------- IRQ init stuff ---------------------- */
-
-extern asmlinkage void vr4181_handle_irq(void);
-extern void breakpoint(void);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-extern void mips_cpu_irq_init(u32 irq_base);
-
-static struct irqaction cascade =
- { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
-static struct irqaction reserved =
- { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
-
-void __init arch_init_irq(void)
-{
- int i;
-
- set_except_vector(0, vr4181_handle_irq);
-
- /* init CPU irqs */
- mips_cpu_irq_init(VR4181_CPU_IRQ_BASE);
-
- /* init sys irqs */
- sys_irq_base = VR4181_SYS_IRQ_BASE;
- for (i=sys_irq_base; i < sys_irq_base + VR4181_NUM_SYS_IRQ; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].handler = &sys_irq_controller;
- }
-
- /* init gpio irqs */
- gpio_irq_base = VR4181_GPIO_IRQ_BASE;
- for (i=gpio_irq_base; i < gpio_irq_base + VR4181_NUM_GPIO_IRQ; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].handler = &gpio_irq_controller;
- }
-
- /* Default all ICU IRQs to off ... */
- *VR4181_MSYSINT1REG = 0;
- *VR4181_MSYSINT2REG = 0;
-
- /* We initialize the level 2 ICU registers to all bits disabled. */
- *VR4181_MPIUINTREG = 0;
- *VR4181_MAIUINTREG = 0;
- *VR4181_MKIUINTREG = 0;
-
- /* disable all GPIO intrs */
- *VR4181_GPINTMSK = 0xffff;
-
- /* vector handler. What these do is register the IRQ as non-sharable */
- setup_irq(VR4181_IRQ_INT0, &cascade);
- setup_irq(VR4181_IRQ_GIU, &cascade);
-
- /*
- * RTC interrupts are interesting. They have two destinations.
- * One is at sys irq controller, and the other is at CPU IP3 and IP4.
- * RTC timer is used as system timer.
- * We enable them here, but timer routine will register later
- * with CPU IP3/IP4.
- */
- setup_irq(VR4181_IRQ_RTCL1, &reserved);
- setup_irq(VR4181_IRQ_RTCL2, &reserved);
-}
+++ /dev/null
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/vr4181/common/serial.c
- * initialize serial port on vr4181.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * [jsun, 010925]
- * You need to make sure rs_table has at least one element in
- * drivers/char/serial.c file. There is no good way to do it right
- * now. A workaround is to include CONFIG_SERIAL_MANY_PORTS in your
- * configure file, which would gives you 64 ports and wastes 11K ram.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-
-#include <asm/vr4181/vr4181.h>
-
-void __init vr4181_init_serial(void)
-{
- struct serial_struct s;
-
- /* turn on UART clock */
- *VR4181_CMUCLKMSK |= VR4181_CMUCLKMSK_MSKSIU;
-
- /* clear memory */
- memset(&s, 0, sizeof(s));
-
- s.line = 0; /* we set the first one */
- s.baud_base = 1152000;
- s.irq = VR4181_IRQ_SIU;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; /* STD_COM_FLAGS */
- s.iomem_base = (u8*)VR4181_SIURB;
- s.iomem_reg_shift = 0;
- s.io_type = SERIAL_IO_MEM;
- if (early_serial_setup(&s) != 0) {
- panic("vr4181_init_serial() failed!");
- }
-}
-
+++ /dev/null
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * rtc and time ops for vr4181. Part of code is drived from
- * linux-vr, originally written by Bradley D. LaRonde & Michael Klar.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/param.h> /* for HZ */
-#include <linux/time.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/time.h>
-
-#include <asm/vr4181/vr4181.h>
-
-#define COUNTS_PER_JIFFY ((32768 + HZ/2) / HZ)
-
-/*
- * RTC ops
- */
-
-DEFINE_SPINLOCK(rtc_lock);
-
-/* per VR41xx docs, bad data can be read if between 2 counts */
-static inline unsigned short
-read_time_reg(volatile unsigned short *reg)
-{
- unsigned short value;
- do {
- value = *reg;
- barrier();
- } while (value != *reg);
- return value;
-}
-
-static unsigned long
-vr4181_rtc_get_time(void)
-{
- unsigned short regh, regm, regl;
-
- // why this crazy order, you ask? to guarantee that neither m
- // nor l wrap before all 3 read
- do {
- regm = read_time_reg(VR4181_ETIMEMREG);
- barrier();
- regh = read_time_reg(VR4181_ETIMEHREG);
- barrier();
- regl = read_time_reg(VR4181_ETIMELREG);
- } while (regm != read_time_reg(VR4181_ETIMEMREG));
- return ((regh << 17) | (regm << 1) | (regl >> 15));
-}
-
-static int
-vr4181_rtc_set_time(unsigned long timeval)
-{
- unsigned short intreg;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- intreg = *VR4181_RTCINTREG & 0x05;
- barrier();
- *VR4181_ETIMELREG = timeval << 15;
- *VR4181_ETIMEMREG = timeval >> 1;
- *VR4181_ETIMEHREG = timeval >> 17;
- barrier();
- // assume that any ints that just triggered are invalid, since the
- // time value is written non-atomically in 3 separate regs
- *VR4181_RTCINTREG = 0x05 ^ intreg;
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
-
-
-/*
- * timer interrupt routine (wrapper)
- *
- * we need our own interrupt routine because we need to clear
- * RTC1 interrupt.
- */
-static void
-vr4181_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- /* Clear the interrupt. */
- *VR4181_RTCINTREG = 0x2;
-
- /* call the generic one */
- timer_interrupt(irq, dev_id, regs);
-}
-
-
-/*
- * vr4181_time_init:
- *
- * We pick the following choices:
- * . we use elapsed timer as the RTC. We set some reasonable init data since
- * it does not persist across reset
- * . we use RTC1 as the system timer interrupt source.
- * . we use CPU counter for fast_gettimeoffset and we calivrate the cpu
- * frequency. In other words, we use calibrate_div64_gettimeoffset().
- * . we use our own timer interrupt routine which clears the interrupt
- * and then calls the generic high-level timer interrupt routine.
- *
- */
-
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-
-static void
-vr4181_timer_setup(struct irqaction *irq)
-{
- /* over-write the handler to be our own one */
- irq->handler = vr4181_timer_interrupt;
-
- /* sets up the frequency */
- *VR4181_RTCL1LREG = COUNTS_PER_JIFFY;
- *VR4181_RTCL1HREG = 0;
-
- /* and ack any pending ints */
- *VR4181_RTCINTREG = 0x2;
-
- /* setup irqaction */
- setup_irq(VR4181_IRQ_INT1, irq);
-
-}
-
-void
-vr4181_init_time(void)
-{
- /* setup hookup functions */
- rtc_get_time = vr4181_rtc_get_time;
- rtc_set_time = vr4181_rtc_set_time;
-
- board_timer_setup = vr4181_timer_setup;
-}
-
+++ /dev/null
-#
-# Makefile for common code of NEC Osprey board
-#
-
-obj-y := setup.o prom.o reset.o
-
-obj-$(CONFIG_KGDB) += dbg_io.o
+++ /dev/null
-/*
- * kgdb io functions for osprey. We use the serial port on debug board.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/* ======================= CONFIG ======================== */
-
-/* [jsun] we use the second serial port for kdb */
-#define BASE 0xb7fffff0
-#define MAX_BAUD 115200
-
-/* distance in bytes between two serial registers */
-#define REG_OFFSET 1
-
-/*
- * 0 - kgdb does serial init
- * 1 - kgdb skip serial init
- */
-static int remoteDebugInitialized = 1;
-
-/*
- * the default baud rate *if* kgdb does serial init
- */
-#define BAUD_DEFAULT UART16550_BAUD_38400
-
-/* ======================= END OF CONFIG ======================== */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-/* register offset */
-#define OFS_RCV_BUFFER 0
-#define OFS_TRANS_HOLD 0
-#define OFS_SEND_BUFFER 0
-#define OFS_INTR_ENABLE (1*REG_OFFSET)
-#define OFS_INTR_ID (2*REG_OFFSET)
-#define OFS_DATA_FORMAT (3*REG_OFFSET)
-#define OFS_LINE_CONTROL (3*REG_OFFSET)
-#define OFS_MODEM_CONTROL (4*REG_OFFSET)
-#define OFS_RS232_OUTPUT (4*REG_OFFSET)
-#define OFS_LINE_STATUS (5*REG_OFFSET)
-#define OFS_MODEM_STATUS (6*REG_OFFSET)
-#define OFS_RS232_INPUT (6*REG_OFFSET)
-#define OFS_SCRATCH_PAD (7*REG_OFFSET)
-
-#define OFS_DIVISOR_LSB (0*REG_OFFSET)
-#define OFS_DIVISOR_MSB (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
-#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
- /* disable interrupts */
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- /* set up buad rate */
- {
- uint32 divisor;
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- divisor = MAX_BAUD / baud;
- UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
- UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
- /* clear DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
- }
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-
-uint8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
- return 1;
-}
+++ /dev/null
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/vr4181/osprey/prom.c
- * prom code for osprey.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-const char *get_system_type(void)
-{
- return "NEC_Vr41xx Osprey";
-}
-
-/*
- * [jsun] right now we assume it is the nec debug monitor, which does
- * not pass any arguments.
- */
-void __init prom_init(void)
-{
- // cmdline is now set in default config
- // strcpy(arcs_cmdline, "ip=bootp ");
- // strcat(arcs_cmdline, "ether=46,0x03fe0300,eth0 ");
- // strcpy(arcs_cmdline, "ether=0,0x0300,eth0 "
- // strcat(arcs_cmdline, "video=vr4181fb:xres:240,yres:320,bpp:8 ");
-
- mips_machgroup = MACH_GROUP_NEC_VR41XX;
- mips_machtype = MACH_NEC_OSPREY;
-
- /* 16MB fixed */
- add_memory_region(0, 16 << 20, BOOT_MEM_RAM);
-}
-
-unsigned long __init prom_free_prom_memory(void)
-{
- return 0;
-}
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-
-void nec_osprey_restart(char *command)
-{
- set_c0_status(ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void nec_osprey_halt(void)
-{
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-void nec_osprey_power_off(void)
-{
- nec_osprey_halt();
-}
+++ /dev/null
-/*
- * linux/arch/mips/vr4181/setup.c
- *
- * VR41xx setup routines
- *
- * Copyright (C) 1999 Bradley D. LaRonde
- * Copyright (C) 1999, 2000 Michael Klar
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/reboot.h>
-#include <asm/vr4181/vr4181.h>
-#include <asm/io.h>
-
-
-extern void nec_osprey_restart(char* c);
-extern void nec_osprey_halt(void);
-extern void nec_osprey_power_off(void);
-
-extern void vr4181_init_serial(void);
-extern void vr4181_init_time(void);
-
-static void __init nec_osprey_setup(void)
-{
- set_io_port_base(VR4181_PORT_BASE);
- isa_slot_offset = VR4181_ISAMEM_BASE;
-
- vr4181_init_serial();
- vr4181_init_time();
-
- _machine_restart = nec_osprey_restart;
- _machine_halt = nec_osprey_halt;
- _machine_power_off = nec_osprey_power_off;
-
- /* setup resource limit */
- ioport_resource.end = 0xffffffff;
- iomem_resource.end = 0xffffffff;
-
- /* [jsun] hack */
- /*
- printk("[jsun] hack to change external ISA control register, %x -> %x\n",
- (*VR4181_XISACTL),
- (*VR4181_XISACTL) | 0x2);
- *VR4181_XISACTL |= 0x2;
- */
-
- // *VR4181_GPHIBSTH = 0x2000;
- // *VR4181_GPMD0REG = 0x00c0;
- // *VR4181_GPINTEN = 1<<6;
-
- /* [jsun] I believe this will get the interrupt type right
- * for the ether port.
- */
- *VR4181_GPINTTYPL = 0x3000;
-}
-
-early_initcall(nec_osprey_setup);
+++ /dev/null
-/*
- * Macros for vr4181 IRQ numbers.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * Strategy:
- *
- * Vr4181 has conceptually three levels of interrupt controllers:
- * 1. the CPU itself with 8 intr level.
- * 2. system interrupt controller, cascaded from int0 pin in CPU, 32 intrs
- * 3. GPIO interrupts : forwarding external interrupts to sys intr controller
- */
-
-/* decide the irq block assignment */
-#define VR4181_NUM_CPU_IRQ 8
-#define VR4181_NUM_SYS_IRQ 32
-#define VR4181_NUM_GPIO_IRQ 16
-
-#define VR4181_IRQ_BASE 0
-
-#define VR4181_CPU_IRQ_BASE VR4181_IRQ_BASE
-#define VR4181_SYS_IRQ_BASE (VR4181_CPU_IRQ_BASE + VR4181_NUM_CPU_IRQ)
-#define VR4181_GPIO_IRQ_BASE (VR4181_SYS_IRQ_BASE + VR4181_NUM_SYS_IRQ)
-
-/* CPU interrupts */
-
-/*
- IP0 - Software interrupt
- IP1 - Software interrupt
- IP2 - All but battery, high speed modem, and real time clock
- IP3 - RTC Long1 (system timer)
- IP4 - RTC Long2
- IP5 - High Speed Modem (unused on VR4181)
- IP6 - Unused
- IP7 - Timer interrupt from CPO_COMPARE
-*/
-
-#define VR4181_IRQ_SW1 (VR4181_CPU_IRQ_BASE + 0)
-#define VR4181_IRQ_SW2 (VR4181_CPU_IRQ_BASE + 1)
-#define VR4181_IRQ_INT0 (VR4181_CPU_IRQ_BASE + 2)
-#define VR4181_IRQ_INT1 (VR4181_CPU_IRQ_BASE + 3)
-#define VR4181_IRQ_INT2 (VR4181_CPU_IRQ_BASE + 4)
-#define VR4181_IRQ_INT3 (VR4181_CPU_IRQ_BASE + 5)
-#define VR4181_IRQ_INT4 (VR4181_CPU_IRQ_BASE + 6)
-#define VR4181_IRQ_TIMER (VR4181_CPU_IRQ_BASE + 7)
-
-
-/* Cascaded from VR4181_IRQ_INT0 (ICU mapped interrupts) */
-
-/*
- IP2 - same as VR4181_IRQ_INT1
- IP8 - This is a cascade to GPIO IRQ's. Do not use.
- IP16 - same as VR4181_IRQ_INT2
- IP18 - CompactFlash
-*/
-
-#define VR4181_IRQ_BATTERY (VR4181_SYS_IRQ_BASE + 0)
-#define VR4181_IRQ_POWER (VR4181_SYS_IRQ_BASE + 1)
-#define VR4181_IRQ_RTCL1 (VR4181_SYS_IRQ_BASE + 2)
-#define VR4181_IRQ_ETIMER (VR4181_SYS_IRQ_BASE + 3)
-#define VR4181_IRQ_RFU12 (VR4181_SYS_IRQ_BASE + 4)
-#define VR4181_IRQ_PIU (VR4181_SYS_IRQ_BASE + 5)
-#define VR4181_IRQ_AIU (VR4181_SYS_IRQ_BASE + 6)
-#define VR4181_IRQ_KIU (VR4181_SYS_IRQ_BASE + 7)
-#define VR4181_IRQ_GIU (VR4181_SYS_IRQ_BASE + 8)
-#define VR4181_IRQ_SIU (VR4181_SYS_IRQ_BASE + 9)
-#define VR4181_IRQ_RFU18 (VR4181_SYS_IRQ_BASE + 10)
-#define VR4181_IRQ_SOFT (VR4181_SYS_IRQ_BASE + 11)
-#define VR4181_IRQ_RFU20 (VR4181_SYS_IRQ_BASE + 12)
-#define VR4181_IRQ_DOZEPIU (VR4181_SYS_IRQ_BASE + 13)
-#define VR4181_IRQ_RFU22 (VR4181_SYS_IRQ_BASE + 14)
-#define VR4181_IRQ_RFU23 (VR4181_SYS_IRQ_BASE + 15)
-#define VR4181_IRQ_RTCL2 (VR4181_SYS_IRQ_BASE + 16)
-#define VR4181_IRQ_LED (VR4181_SYS_IRQ_BASE + 17)
-#define VR4181_IRQ_ECU (VR4181_SYS_IRQ_BASE + 18)
-#define VR4181_IRQ_CSU (VR4181_SYS_IRQ_BASE + 19)
-#define VR4181_IRQ_USB (VR4181_SYS_IRQ_BASE + 20)
-#define VR4181_IRQ_DMA (VR4181_SYS_IRQ_BASE + 21)
-#define VR4181_IRQ_LCD (VR4181_SYS_IRQ_BASE + 22)
-#define VR4181_IRQ_RFU31 (VR4181_SYS_IRQ_BASE + 23)
-#define VR4181_IRQ_RFU32 (VR4181_SYS_IRQ_BASE + 24)
-#define VR4181_IRQ_RFU33 (VR4181_SYS_IRQ_BASE + 25)
-#define VR4181_IRQ_RFU34 (VR4181_SYS_IRQ_BASE + 26)
-#define VR4181_IRQ_RFU35 (VR4181_SYS_IRQ_BASE + 27)
-#define VR4181_IRQ_RFU36 (VR4181_SYS_IRQ_BASE + 28)
-#define VR4181_IRQ_RFU37 (VR4181_SYS_IRQ_BASE + 29)
-#define VR4181_IRQ_RFU38 (VR4181_SYS_IRQ_BASE + 30)
-#define VR4181_IRQ_RFU39 (VR4181_SYS_IRQ_BASE + 31)
-
-/* Cascaded from VR4181_IRQ_GIU */
-#define VR4181_IRQ_GPIO0 (VR4181_GPIO_IRQ_BASE + 0)
-#define VR4181_IRQ_GPIO1 (VR4181_GPIO_IRQ_BASE + 1)
-#define VR4181_IRQ_GPIO2 (VR4181_GPIO_IRQ_BASE + 2)
-#define VR4181_IRQ_GPIO3 (VR4181_GPIO_IRQ_BASE + 3)
-#define VR4181_IRQ_GPIO4 (VR4181_GPIO_IRQ_BASE + 4)
-#define VR4181_IRQ_GPIO5 (VR4181_GPIO_IRQ_BASE + 5)
-#define VR4181_IRQ_GPIO6 (VR4181_GPIO_IRQ_BASE + 6)
-#define VR4181_IRQ_GPIO7 (VR4181_GPIO_IRQ_BASE + 7)
-#define VR4181_IRQ_GPIO8 (VR4181_GPIO_IRQ_BASE + 8)
-#define VR4181_IRQ_GPIO9 (VR4181_GPIO_IRQ_BASE + 9)
-#define VR4181_IRQ_GPIO10 (VR4181_GPIO_IRQ_BASE + 10)
-#define VR4181_IRQ_GPIO11 (VR4181_GPIO_IRQ_BASE + 11)
-#define VR4181_IRQ_GPIO12 (VR4181_GPIO_IRQ_BASE + 12)
-#define VR4181_IRQ_GPIO13 (VR4181_GPIO_IRQ_BASE + 13)
-#define VR4181_IRQ_GPIO14 (VR4181_GPIO_IRQ_BASE + 14)
-#define VR4181_IRQ_GPIO15 (VR4181_GPIO_IRQ_BASE + 15)
-
-
-// Alternative to above GPIO IRQ defines
-#define VR4181_IRQ_GPIO(pin) ((VR4181_IRQ_GPIO0) + (pin))
-
-#define VR4181_IRQ_MAX (VR4181_IRQ_BASE + VR4181_NUM_CPU_IRQ + \
- VR4181_NUM_SYS_IRQ + VR4181_NUM_GPIO_IRQ)
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Michael Klar
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- */
-#ifndef __ASM_VR4181_VR4181_H
-#define __ASM_VR4181_VR4181_H
-
-#include <asm/addrspace.h>
-
-#include <asm/vr4181/irq.h>
-
-#ifndef __ASSEMBLY__
-#define __preg8 (volatile unsigned char*)
-#define __preg16 (volatile unsigned short*)
-#define __preg32 (volatile unsigned int*)
-#else
-#define __preg8
-#define __preg16
-#define __preg32
-#endif
-
-// Embedded CPU peripheral registers
-// Note that many of the registers have different physical address for VR4181
-
-// Bus Control Unit (BCU)
-#define VR4181_BCUCNTREG1 __preg16(KSEG1 + 0x0A000000) /* BCU control register 1 (R/W) */
-#define VR4181_CMUCLKMSK __preg16(KSEG1 + 0x0A000004) /* Clock mask register (R/W) */
-#define VR4181_CMUCLKMSK_MSKCSUPCLK 0x0040
-#define VR4181_CMUCLKMSK_MSKAIUPCLK 0x0020
-#define VR4181_CMUCLKMSK_MSKPIUPCLK 0x0010
-#define VR4181_CMUCLKMSK_MSKADUPCLK 0x0008
-#define VR4181_CMUCLKMSK_MSKSIU18M 0x0004
-#define VR4181_CMUCLKMSK_MSKADU18M 0x0002
-#define VR4181_CMUCLKMSK_MSKUSB 0x0001
-#define VR4181_CMUCLKMSK_MSKSIU VR4181_CMUCLKMSK_MSKSIU18M
-#define VR4181_BCUSPEEDREG __preg16(KSEG1 + 0x0A00000C) /* BCU access time parameter (R/W) */
-#define VR4181_BCURFCNTREG __preg16(KSEG1 + 0x0A000010) /* BCU refresh control register (R/W) */
-#define VR4181_REVIDREG __preg16(KSEG1 + 0x0A000014) /* Revision ID register (R) */
-#define VR4181_CLKSPEEDREG __preg16(KSEG1 + 0x0A000018) /* Clock speed register (R) */
-#define VR4181_EDOMCYTREG __preg16(KSEG1 + 0x0A000300) /* Memory cycle timing register (R/W) */
-#define VR4181_MEMCFG_REG __preg16(KSEG1 + 0x0A000304) /* Memory configuration register (R/W) */
-#define VR4181_MODE_REG __preg16(KSEG1 + 0x0A000308) /* SDRAM mode register (R/W) */
-#define VR4181_SDTIMINGREG __preg16(KSEG1 + 0x0A00030C) /* SDRAM timing register (R/W) */
-
-// DMA Control Unit (DCU)
-#define VR4181_MICDEST1REG1 __preg16(KSEG1 + 0x0A000020) /* Microphone destination 1 address register 1 (R/W) */
-#define VR4181_MICDEST1REG2 __preg16(KSEG1 + 0x0A000022) /* Microphone destination 1 address register 2 (R/W) */
-#define VR4181_MICDEST2REG1 __preg16(KSEG1 + 0x0A000024) /* Microphone destination 2 address register 1 (R/W) */
-#define VR4181_MICDEST2REG2 __preg16(KSEG1 + 0x0A000026) /* Microphone destination 2 address register 2 (R/W) */
-#define VR4181_SPKRRC1REG1 __preg16(KSEG1 + 0x0A000028) /* Speaker Source 1 address register 1 (R/W) */
-#define VR4181_SPKRRC1REG2 __preg16(KSEG1 + 0x0A00002A) /* Speaker Source 1 address register 2 (R/W) */
-#define VR4181_SPKRRC2REG1 __preg16(KSEG1 + 0x0A00002C) /* Speaker Source 2 address register 1 (R/W) */
-#define VR4181_SPKRRC2REG2 __preg16(KSEG1 + 0x0A00002E) /* Speaker Source 2 address register 2 (R/W) */
-#define VR4181_DMARSTREG __preg16(KSEG1 + 0x0A000040) /* DMA Reset register (R/W) */
-#define VR4181_AIUDMAMSKREG __preg16(KSEG1 + 0x0A000046) /* Audio DMA mask register (R/W) */
-#define VR4181_USBDMAMSKREG __preg16(KSEG1 + 0x0A000600) /* USB DMA Mask register (R/W) */
-#define VR4181_USBRXS1AREG1 __preg16(KSEG1 + 0x0A000602) /* USB Rx source 1 address register 1 (R/W) */
-#define VR4181_USBRXS1AREG2 __preg16(KSEG1 + 0x0A000604) /* USB Rx source 1 address register 2 (R/W) */
-#define VR4181_USBRXS2AREG1 __preg16(KSEG1 + 0x0A000606) /* USB Rx source 2 address register 1 (R/W) */
-#define VR4181_USBRXS2AREG2 __preg16(KSEG1 + 0x0A000608) /* USB Rx source 2 address register 2 (R/W) */
-#define VR4181_USBTXS1AREG1 __preg16(KSEG1 + 0x0A00060A) /* USB Tx source 1 address register 1 (R/W) */
-#define VR4181_USBTXS1AREG2 __preg16(KSEG1 + 0x0A00060C) /* USB Tx source 1 address register 2 (R/W) */
-#define VR4181_USBTXS2AREG1 __preg16(KSEG1 + 0x0A00060E) /* USB Tx source 2 address register 1 (R/W) */
-#define VR4181_USBTXS2AREG2 __preg16(KSEG1 + 0x0A000610) /* USB Tx source 2 address register 2 (R/W) */
-#define VR4181_USBRXD1AREG1 __preg16(KSEG1 + 0x0A00062A) /* USB Rx destination 1 address register 1 (R/W) */
-#define VR4181_USBRXD1AREG2 __preg16(KSEG1 + 0x0A00062C) /* USB Rx destination 1 address register 2 (R/W) */
-#define VR4181_USBRXD2AREG1 __preg16(KSEG1 + 0x0A00062E) /* USB Rx destination 2 address register 1 (R/W) */
-#define VR4181_USBRXD2AREG2 __preg16(KSEG1 + 0x0A000630) /* USB Rx destination 2 address register 2 (R/W) */
-#define VR4181_USBTXD1AREG1 __preg16(KSEG1 + 0x0A000632) /* USB Tx destination 1 address register 1 (R/W) */
-#define VR4181_USBTXD1AREG2 __preg16(KSEG1 + 0x0A000634) /* USB Tx destination 1 address register 2 (R/W) */
-#define VR4181_USBTXD2AREG1 __preg16(KSEG1 + 0x0A000636) /* USB Tx destination 2 address register 1 (R/W) */
-#define VR4181_USBTXD2AREG2 __preg16(KSEG1 + 0x0A000638) /* USB Tx destination 2 address register 2 (R/W) */
-#define VR4181_RxRCLENREG __preg16(KSEG1 + 0x0A000652) /* USB Rx record length register (R/W) */
-#define VR4181_TxRCLENREG __preg16(KSEG1 + 0x0A000654) /* USB Tx record length register (R/W) */
-#define VR4181_MICRCLENREG __preg16(KSEG1 + 0x0A000658) /* Microphone record length register (R/W) */
-#define VR4181_SPKRCLENREG __preg16(KSEG1 + 0x0A00065A) /* Speaker record length register (R/W) */
-#define VR4181_USBCFGREG __preg16(KSEG1 + 0x0A00065C) /* USB configuration register (R/W) */
-#define VR4181_MICDMACFGREG __preg16(KSEG1 + 0x0A00065E) /* Microphone DMA configuration register (R/W) */
-#define VR4181_SPKDMACFGREG __preg16(KSEG1 + 0x0A000660) /* Speaker DMA configuration register (R/W) */
-#define VR4181_DMAITRQREG __preg16(KSEG1 + 0x0A000662) /* DMA interrupt request register (R/W) */
-#define VR4181_DMACLTREG __preg16(KSEG1 + 0x0A000664) /* DMA control register (R/W) */
-#define VR4181_DMAITMKREG __preg16(KSEG1 + 0x0A000666) /* DMA interrupt mask register (R/W) */
-
-// ISA Bridge
-#define VR4181_ISABRGCTL __preg16(KSEG1 + 0x0B0002C0) /* ISA Bridge Control Register (R/W) */
-#define VR4181_ISABRGSTS __preg16(KSEG1 + 0x0B0002C2) /* ISA Bridge Status Register (R/W) */
-#define VR4181_XISACTL __preg16(KSEG1 + 0x0B0002C4) /* External ISA Control Register (R/W) */
-
-// Clocked Serial Interface (CSI)
-#define VR4181_CSIMODE __preg16(KSEG1 + 0x0B000900) /* CSI Mode Register (R/W) */
-#define VR4181_CSIRXDATA __preg16(KSEG1 + 0x0B000902) /* CSI Receive Data Register (R) */
-#define VR4181_CSITXDATA __preg16(KSEG1 + 0x0B000904) /* CSI Transmit Data Register (R/W) */
-#define VR4181_CSILSTAT __preg16(KSEG1 + 0x0B000906) /* CSI Line Status Register (R/W) */
-#define VR4181_CSIINTMSK __preg16(KSEG1 + 0x0B000908) /* CSI Interrupt Mask Register (R/W) */
-#define VR4181_CSIINTSTAT __preg16(KSEG1 + 0x0B00090a) /* CSI Interrupt Status Register (R/W) */
-#define VR4181_CSITXBLEN __preg16(KSEG1 + 0x0B00090c) /* CSI Transmit Burst Length Register (R/W) */
-#define VR4181_CSIRXBLEN __preg16(KSEG1 + 0x0B00090e) /* CSI Receive Burst Length Register (R/W) */
-
-// Interrupt Control Unit (ICU)
-#define VR4181_SYSINT1REG __preg16(KSEG1 + 0x0A000080) /* Level 1 System interrupt register 1 (R) */
-#define VR4181_MSYSINT1REG __preg16(KSEG1 + 0x0A00008C) /* Level 1 mask system interrupt register 1 (R/W) */
-#define VR4181_NMIREG __preg16(KSEG1 + 0x0A000098) /* NMI register (R/W) */
-#define VR4181_SOFTINTREG __preg16(KSEG1 + 0x0A00009A) /* Software interrupt register (R/W) */
-#define VR4181_SYSINT2REG __preg16(KSEG1 + 0x0A000200) /* Level 1 System interrupt register 2 (R) */
-#define VR4181_MSYSINT2REG __preg16(KSEG1 + 0x0A000206) /* Level 1 mask system interrupt register 2 (R/W) */
-#define VR4181_PIUINTREGro __preg16(KSEG1 + 0x0B000082) /* Level 2 PIU interrupt register (R) */
-#define VR4181_AIUINTREG __preg16(KSEG1 + 0x0B000084) /* Level 2 AIU interrupt register (R) */
-#define VR4181_MPIUINTREG __preg16(KSEG1 + 0x0B00008E) /* Level 2 mask PIU interrupt register (R/W) */
-#define VR4181_MAIUINTREG __preg16(KSEG1 + 0x0B000090) /* Level 2 mask AIU interrupt register (R/W) */
-#define VR4181_MKIUINTREG __preg16(KSEG1 + 0x0B000092) /* Level 2 mask KIU interrupt register (R/W) */
-#define VR4181_KIUINTREG __preg16(KSEG1 + 0x0B000198) /* Level 2 KIU interrupt register (R) */
-
-// Power Management Unit (PMU)
-#define VR4181_PMUINTREG __preg16(KSEG1 + 0x0B0000A0) /* PMU Status Register (R/W) */
-#define VR4181_PMUINT_POWERSW 0x1 /* Power switch */
-#define VR4181_PMUINT_BATT 0x2 /* Low batt during normal operation */
-#define VR4181_PMUINT_DEADMAN 0x4 /* Deadman's switch */
-#define VR4181_PMUINT_RESET 0x8 /* Reset switch */
-#define VR4181_PMUINT_RTCRESET 0x10 /* RTC Reset */
-#define VR4181_PMUINT_TIMEOUT 0x20 /* HAL Timer Reset */
-#define VR4181_PMUINT_BATTLOW 0x100 /* Battery low */
-#define VR4181_PMUINT_RTC 0x200 /* RTC Alarm */
-#define VR4181_PMUINT_DCD 0x400 /* DCD# */
-#define VR4181_PMUINT_GPIO0 0x1000 /* GPIO0 */
-#define VR4181_PMUINT_GPIO1 0x2000 /* GPIO1 */
-#define VR4181_PMUINT_GPIO2 0x4000 /* GPIO2 */
-#define VR4181_PMUINT_GPIO3 0x8000 /* GPIO3 */
-
-#define VR4181_PMUCNTREG __preg16(KSEG1 + 0x0B0000A2) /* PMU Control Register (R/W) */
-#define VR4181_PMUWAITREG __preg16(KSEG1 + 0x0B0000A8) /* PMU Wait Counter Register (R/W) */
-#define VR4181_PMUDIVREG __preg16(KSEG1 + 0x0B0000AC) /* PMU Divide Mode Register (R/W) */
-#define VR4181_DRAMHIBCTL __preg16(KSEG1 + 0x0B0000B2) /* DRAM Hibernate Control Register (R/W) */
-
-// Real Time Clock Unit (RTC)
-#define VR4181_ETIMELREG __preg16(KSEG1 + 0x0B0000C0) /* Elapsed Time L Register (R/W) */
-#define VR4181_ETIMEMREG __preg16(KSEG1 + 0x0B0000C2) /* Elapsed Time M Register (R/W) */
-#define VR4181_ETIMEHREG __preg16(KSEG1 + 0x0B0000C4) /* Elapsed Time H Register (R/W) */
-#define VR4181_ECMPLREG __preg16(KSEG1 + 0x0B0000C8) /* Elapsed Compare L Register (R/W) */
-#define VR4181_ECMPMREG __preg16(KSEG1 + 0x0B0000CA) /* Elapsed Compare M Register (R/W) */
-#define VR4181_ECMPHREG __preg16(KSEG1 + 0x0B0000CC) /* Elapsed Compare H Register (R/W) */
-#define VR4181_RTCL1LREG __preg16(KSEG1 + 0x0B0000D0) /* RTC Long 1 L Register (R/W) */
-#define VR4181_RTCL1HREG __preg16(KSEG1 + 0x0B0000D2) /* RTC Long 1 H Register (R/W) */
-#define VR4181_RTCL1CNTLREG __preg16(KSEG1 + 0x0B0000D4) /* RTC Long 1 Count L Register (R) */
-#define VR4181_RTCL1CNTHREG __preg16(KSEG1 + 0x0B0000D6) /* RTC Long 1 Count H Register (R) */
-#define VR4181_RTCL2LREG __preg16(KSEG1 + 0x0B0000D8) /* RTC Long 2 L Register (R/W) */
-#define VR4181_RTCL2HREG __preg16(KSEG1 + 0x0B0000DA) /* RTC Long 2 H Register (R/W) */
-#define VR4181_RTCL2CNTLREG __preg16(KSEG1 + 0x0B0000DC) /* RTC Long 2 Count L Register (R) */
-#define VR4181_RTCL2CNTHREG __preg16(KSEG1 + 0x0B0000DE) /* RTC Long 2 Count H Register (R) */
-#define VR4181_RTCINTREG __preg16(KSEG1 + 0x0B0001DE) /* RTC Interrupt Register (R/W) */
-
-// Deadman's Switch Unit (DSU)
-#define VR4181_DSUCNTREG __preg16(KSEG1 + 0x0B0000E0) /* DSU Control Register (R/W) */
-#define VR4181_DSUSETREG __preg16(KSEG1 + 0x0B0000E2) /* DSU Dead Time Set Register (R/W) */
-#define VR4181_DSUCLRREG __preg16(KSEG1 + 0x0B0000E4) /* DSU Clear Register (W) */
-#define VR4181_DSUTIMREG __preg16(KSEG1 + 0x0B0000E6) /* DSU Elapsed Time Register (R/W) */
-
-// General Purpose I/O Unit (GIU)
-#define VR4181_GPMD0REG __preg16(KSEG1 + 0x0B000300) /* GPIO Mode 0 Register (R/W) */
-#define VR4181_GPMD1REG __preg16(KSEG1 + 0x0B000302) /* GPIO Mode 1 Register (R/W) */
-#define VR4181_GPMD2REG __preg16(KSEG1 + 0x0B000304) /* GPIO Mode 2 Register (R/W) */
-#define VR4181_GPMD3REG __preg16(KSEG1 + 0x0B000306) /* GPIO Mode 3 Register (R/W) */
-#define VR4181_GPDATHREG __preg16(KSEG1 + 0x0B000308) /* GPIO Data High Register (R/W) */
-#define VR4181_GPDATHREG_GPIO16 0x0001
-#define VR4181_GPDATHREG_GPIO17 0x0002
-#define VR4181_GPDATHREG_GPIO18 0x0004
-#define VR4181_GPDATHREG_GPIO19 0x0008
-#define VR4181_GPDATHREG_GPIO20 0x0010
-#define VR4181_GPDATHREG_GPIO21 0x0020
-#define VR4181_GPDATHREG_GPIO22 0x0040
-#define VR4181_GPDATHREG_GPIO23 0x0080
-#define VR4181_GPDATHREG_GPIO24 0x0100
-#define VR4181_GPDATHREG_GPIO25 0x0200
-#define VR4181_GPDATHREG_GPIO26 0x0400
-#define VR4181_GPDATHREG_GPIO27 0x0800
-#define VR4181_GPDATHREG_GPIO28 0x1000
-#define VR4181_GPDATHREG_GPIO29 0x2000
-#define VR4181_GPDATHREG_GPIO30 0x4000
-#define VR4181_GPDATHREG_GPIO31 0x8000
-#define VR4181_GPDATLREG __preg16(KSEG1 + 0x0B00030A) /* GPIO Data Low Register (R/W) */
-#define VR4181_GPDATLREG_GPIO0 0x0001
-#define VR4181_GPDATLREG_GPIO1 0x0002
-#define VR4181_GPDATLREG_GPIO2 0x0004
-#define VR4181_GPDATLREG_GPIO3 0x0008
-#define VR4181_GPDATLREG_GPIO4 0x0010
-#define VR4181_GPDATLREG_GPIO5 0x0020
-#define VR4181_GPDATLREG_GPIO6 0x0040
-#define VR4181_GPDATLREG_GPIO7 0x0080
-#define VR4181_GPDATLREG_GPIO8 0x0100
-#define VR4181_GPDATLREG_GPIO9 0x0200
-#define VR4181_GPDATLREG_GPIO10 0x0400
-#define VR4181_GPDATLREG_GPIO11 0x0800
-#define VR4181_GPDATLREG_GPIO12 0x1000
-#define VR4181_GPDATLREG_GPIO13 0x2000
-#define VR4181_GPDATLREG_GPIO14 0x4000
-#define VR4181_GPDATLREG_GPIO15 0x8000
-#define VR4181_GPINTEN __preg16(KSEG1 + 0x0B00030C) /* GPIO Interrupt Enable Register (R/W) */
-#define VR4181_GPINTMSK __preg16(KSEG1 + 0x0B00030E) /* GPIO Interrupt Mask Register (R/W) */
-#define VR4181_GPINTTYPH __preg16(KSEG1 + 0x0B000310) /* GPIO Interrupt Type High Register (R/W) */
-#define VR4181_GPINTTYPL __preg16(KSEG1 + 0x0B000312) /* GPIO Interrupt Type Low Register (R/W) */
-#define VR4181_GPINTSTAT __preg16(KSEG1 + 0x0B000314) /* GPIO Interrupt Status Register (R/W) */
-#define VR4181_GPHIBSTH __preg16(KSEG1 + 0x0B000316) /* GPIO Hibernate Pin State High Register (R/W) */
-#define VR4181_GPHIBSTL __preg16(KSEG1 + 0x0B000318) /* GPIO Hibernate Pin State Low Register (R/W) */
-#define VR4181_GPSICTL __preg16(KSEG1 + 0x0B00031A) /* GPIO Serial Interface Control Register (R/W) */
-#define VR4181_KEYEN __preg16(KSEG1 + 0x0B00031C) /* Keyboard Scan Pin Enable Register (R/W) */
-#define VR4181_PCS0STRA __preg16(KSEG1 + 0x0B000320) /* Programmable Chip Select [0] Start Address Register (R/W) */
-#define VR4181_PCS0STPA __preg16(KSEG1 + 0x0B000322) /* Programmable Chip Select [0] Stop Address Register (R/W) */
-#define VR4181_PCS0HIA __preg16(KSEG1 + 0x0B000324) /* Programmable Chip Select [0] High Address Register (R/W) */
-#define VR4181_PCS1STRA __preg16(KSEG1 + 0x0B000326) /* Programmable Chip Select [1] Start Address Register (R/W) */
-#define VR4181_PCS1STPA __preg16(KSEG1 + 0x0B000328) /* Programmable Chip Select [1] Stop Address Register (R/W) */
-#define VR4181_PCS1HIA __preg16(KSEG1 + 0x0B00032A) /* Programmable Chip Select [1] High Address Register (R/W) */
-#define VR4181_PCSMODE __preg16(KSEG1 + 0x0B00032C) /* Programmable Chip Select Mode Register (R/W) */
-#define VR4181_LCDGPMODE __preg16(KSEG1 + 0x0B00032E) /* LCD General Purpose Mode Register (R/W) */
-#define VR4181_MISCREG0 __preg16(KSEG1 + 0x0B000330) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG1 __preg16(KSEG1 + 0x0B000332) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG2 __preg16(KSEG1 + 0x0B000334) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG3 __preg16(KSEG1 + 0x0B000336) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG4 __preg16(KSEG1 + 0x0B000338) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG5 __preg16(KSEG1 + 0x0B00033A) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG6 __preg16(KSEG1 + 0x0B00033C) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG7 __preg16(KSEG1 + 0x0B00033D) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG8 __preg16(KSEG1 + 0x0B000340) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG9 __preg16(KSEG1 + 0x0B000342) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG10 __preg16(KSEG1 + 0x0B000344) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG11 __preg16(KSEG1 + 0x0B000346) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG12 __preg16(KSEG1 + 0x0B000348) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG13 __preg16(KSEG1 + 0x0B00034A) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG14 __preg16(KSEG1 + 0x0B00034C) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG15 __preg16(KSEG1 + 0x0B00034E) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_SECIRQMASKL VR4181_GPINTEN
-// No SECIRQMASKH for VR4181
-
-// Touch Panel Interface Unit (PIU)
-#define VR4181_PIUCNTREG __preg16(KSEG1 + 0x0B000122) /* PIU Control register (R/W) */
-#define VR4181_PIUCNTREG_PIUSEQEN 0x0004
-#define VR4181_PIUCNTREG_PIUPWR 0x0002
-#define VR4181_PIUCNTREG_PADRST 0x0001
-
-#define VR4181_PIUINTREG __preg16(KSEG1 + 0x0B000124) /* PIU Interrupt cause register (R/W) */
-#define VR4181_PIUINTREG_OVP 0x8000
-#define VR4181_PIUINTREG_PADCMD 0x0040
-#define VR4181_PIUINTREG_PADADP 0x0020
-#define VR4181_PIUINTREG_PADPAGE1 0x0010
-#define VR4181_PIUINTREG_PADPAGE0 0x0008
-#define VR4181_PIUINTREG_PADDLOST 0x0004
-#define VR4181_PIUINTREG_PENCHG 0x0001
-
-#define VR4181_PIUSIVLREG __preg16(KSEG1 + 0x0B000126) /* PIU Data sampling interval register (R/W) */
-#define VR4181_PIUSTBLREG __preg16(KSEG1 + 0x0B000128) /* PIU A/D converter start delay register (R/W) */
-#define VR4181_PIUCMDREG __preg16(KSEG1 + 0x0B00012A) /* PIU A/D command register (R/W) */
-#define VR4181_PIUASCNREG __preg16(KSEG1 + 0x0B000130) /* PIU A/D port scan register (R/W) */
-#define VR4181_PIUAMSKREG __preg16(KSEG1 + 0x0B000132) /* PIU A/D scan mask register (R/W) */
-#define VR4181_PIUCIVLREG __preg16(KSEG1 + 0x0B00013E) /* PIU Check interval register (R) */
-#define VR4181_PIUPB00REG __preg16(KSEG1 + 0x0B0002A0) /* PIU Page 0 Buffer 0 register (R/W) */
-#define VR4181_PIUPB01REG __preg16(KSEG1 + 0x0B0002A2) /* PIU Page 0 Buffer 1 register (R/W) */
-#define VR4181_PIUPB02REG __preg16(KSEG1 + 0x0B0002A4) /* PIU Page 0 Buffer 2 register (R/W) */
-#define VR4181_PIUPB03REG __preg16(KSEG1 + 0x0B0002A6) /* PIU Page 0 Buffer 3 register (R/W) */
-#define VR4181_PIUPB10REG __preg16(KSEG1 + 0x0B0002A8) /* PIU Page 1 Buffer 0 register (R/W) */
-#define VR4181_PIUPB11REG __preg16(KSEG1 + 0x0B0002AA) /* PIU Page 1 Buffer 1 register (R/W) */
-#define VR4181_PIUPB12REG __preg16(KSEG1 + 0x0B0002AC) /* PIU Page 1 Buffer 2 register (R/W) */
-#define VR4181_PIUPB13REG __preg16(KSEG1 + 0x0B0002AE) /* PIU Page 1 Buffer 3 register (R/W) */
-#define VR4181_PIUAB0REG __preg16(KSEG1 + 0x0B0002B0) /* PIU A/D scan Buffer 0 register (R/W) */
-#define VR4181_PIUAB1REG __preg16(KSEG1 + 0x0B0002B2) /* PIU A/D scan Buffer 1 register (R/W) */
-#define VR4181_PIUAB2REG __preg16(KSEG1 + 0x0B0002B4) /* PIU A/D scan Buffer 2 register (R/W) */
-#define VR4181_PIUAB3REG __preg16(KSEG1 + 0x0B0002B6) /* PIU A/D scan Buffer 3 register (R/W) */
-#define VR4181_PIUPB04REG __preg16(KSEG1 + 0x0B0002BC) /* PIU Page 0 Buffer 4 register (R/W) */
-#define VR4181_PIUPB14REG __preg16(KSEG1 + 0x0B0002BE) /* PIU Page 1 Buffer 4 register (R/W) */
-
-// Audio Interface Unit (AIU)
-#define VR4181_SODATREG __preg16(KSEG1 + 0x0B000166) /* Speaker Output Data Register (R/W) */
-#define VR4181_SCNTREG __preg16(KSEG1 + 0x0B000168) /* Speaker Output Control Register (R/W) */
-#define VR4181_MIDATREG __preg16(KSEG1 + 0x0B000170) /* Mike Input Data Register (R/W) */
-#define VR4181_MCNTREG __preg16(KSEG1 + 0x0B000172) /* Mike Input Control Register (R/W) */
-#define VR4181_DVALIDREG __preg16(KSEG1 + 0x0B000178) /* Data Valid Register (R/W) */
-#define VR4181_SEQREG __preg16(KSEG1 + 0x0B00017A) /* Sequential Register (R/W) */
-#define VR4181_INTREG __preg16(KSEG1 + 0x0B00017C) /* Interrupt Register (R/W) */
-#define VR4181_SDMADATREG __preg16(KSEG1 + 0x0B000160) /* Speaker DMA Data Register (R/W) */
-#define VR4181_MDMADATREG __preg16(KSEG1 + 0x0B000162) /* Microphone DMA Data Register (R/W) */
-#define VR4181_DAVREF_SETUP __preg16(KSEG1 + 0x0B000164) /* DAC Vref setup register (R/W) */
-#define VR4181_SCNVC_END __preg16(KSEG1 + 0x0B00016E) /* Speaker sample rate control (R/W) */
-#define VR4181_MIDATREG __preg16(KSEG1 + 0x0B000170) /* Microphone Input Data Register (R/W) */
-#define VR4181_MCNTREG __preg16(KSEG1 + 0x0B000172) /* Microphone Input Control Register (R/W) */
-#define VR4181_MCNVC_END __preg16(KSEG1 + 0x0B00017E) /* Microphone sample rate control (R/W) */
-
-// Keyboard Interface Unit (KIU)
-#define VR4181_KIUDAT0 __preg16(KSEG1 + 0x0B000180) /* KIU Data0 Register (R/W) */
-#define VR4181_KIUDAT1 __preg16(KSEG1 + 0x0B000182) /* KIU Data1 Register (R/W) */
-#define VR4181_KIUDAT2 __preg16(KSEG1 + 0x0B000184) /* KIU Data2 Register (R/W) */
-#define VR4181_KIUDAT3 __preg16(KSEG1 + 0x0B000186) /* KIU Data3 Register (R/W) */
-#define VR4181_KIUDAT4 __preg16(KSEG1 + 0x0B000188) /* KIU Data4 Register (R/W) */
-#define VR4181_KIUDAT5 __preg16(KSEG1 + 0x0B00018A) /* KIU Data5 Register (R/W) */
-#define VR4181_KIUSCANREP __preg16(KSEG1 + 0x0B000190) /* KIU Scan/Repeat Register (R/W) */
-#define VR4181_KIUSCANREP_KEYEN 0x8000
-#define VR4181_KIUSCANREP_SCANSTP 0x0008
-#define VR4181_KIUSCANREP_SCANSTART 0x0004
-#define VR4181_KIUSCANREP_ATSTP 0x0002
-#define VR4181_KIUSCANREP_ATSCAN 0x0001
-#define VR4181_KIUSCANS __preg16(KSEG1 + 0x0B000192) /* KIU Scan Status Register (R) */
-#define VR4181_KIUWKS __preg16(KSEG1 + 0x0B000194) /* KIU Wait Keyscan Stable Register (R/W) */
-#define VR4181_KIUWKI __preg16(KSEG1 + 0x0B000196) /* KIU Wait Keyscan Interval Register (R/W) */
-#define VR4181_KIUINT __preg16(KSEG1 + 0x0B000198) /* KIU Interrupt Register (R/W) */
-#define VR4181_KIUINT_KDATLOST 0x0004
-#define VR4181_KIUINT_KDATRDY 0x0002
-#define VR4181_KIUINT_SCANINT 0x0001
-#define VR4181_KIUDAT6 __preg16(KSEG1 + 0x0B00018C) /* Scan Line 6 Key Data Register (R) */
-#define VR4181_KIUDAT7 __preg16(KSEG1 + 0x0B00018E) /* Scan Line 7 Key Data Register (R) */
-
-// CompactFlash Controller
-#define VR4181_PCCARDINDEX __preg8(KSEG1 + 0x0B0008E0) /* PC Card Controller Index Register */
-#define VR4181_PCCARDDATA __preg8(KSEG1 + 0x0B0008E1) /* PC Card Controller Data Register */
-#define VR4181_INTSTATREG __preg16(KSEG1 + 0x0B0008F8) /* Interrupt Status Register (R/W) */
-#define VR4181_INTMSKREG __preg16(KSEG1 + 0x0B0008FA) /* Interrupt Mask Register (R/W) */
-#define VR4181_CFG_REG_1 __preg16(KSEG1 + 0x0B0008FE) /* Configuration Register 1 */
-
-// LED Control Unit (LED)
-#define VR4181_LEDHTSREG __preg16(KSEG1 + 0x0B000240) /* LED H Time Set register (R/W) */
-#define VR4181_LEDLTSREG __preg16(KSEG1 + 0x0B000242) /* LED L Time Set register (R/W) */
-#define VR4181_LEDCNTREG __preg16(KSEG1 + 0x0B000248) /* LED Control register (R/W) */
-#define VR4181_LEDASTCREG __preg16(KSEG1 + 0x0B00024A) /* LED Auto Stop Time Count register (R/W) */
-#define VR4181_LEDINTREG __preg16(KSEG1 + 0x0B00024C) /* LED Interrupt register (R/W) */
-
-// Serial Interface Unit (SIU / SIU1 and SIU2)
-#define VR4181_SIURB __preg8(KSEG1 + 0x0C000010) /* Receiver Buffer Register (Read) DLAB = 0 (R) */
-#define VR4181_SIUTH __preg8(KSEG1 + 0x0C000010) /* Transmitter Holding Register (Write) DLAB = 0 (W) */
-#define VR4181_SIUDLL __preg8(KSEG1 + 0x0C000010) /* Divisor Latch (Least Significant Byte) DLAB = 1 (R/W) */
-#define VR4181_SIUIE __preg8(KSEG1 + 0x0C000011) /* Interrupt Enable DLAB = 0 (R/W) */
-#define VR4181_SIUDLM __preg8(KSEG1 + 0x0C000011) /* Divisor Latch (Most Significant Byte) DLAB = 1 (R/W) */
-#define VR4181_SIUIID __preg8(KSEG1 + 0x0C000012) /* Interrupt Identification Register (Read) (R) */
-#define VR4181_SIUFC __preg8(KSEG1 + 0x0C000012) /* FIFO Control Register (Write) (W) */
-#define VR4181_SIULC __preg8(KSEG1 + 0x0C000013) /* Line Control Register (R/W) */
-#define VR4181_SIUMC __preg8(KSEG1 + 0x0C000014) /* MODEM Control Register (R/W) */
-#define VR4181_SIULS __preg8(KSEG1 + 0x0C000015) /* Line Status Register (R/W) */
-#define VR4181_SIUMS __preg8(KSEG1 + 0x0C000016) /* MODEM Status Register (R/W) */
-#define VR4181_SIUSC __preg8(KSEG1 + 0x0C000017) /* Scratch Register (R/W) */
-#define VR4181_SIURESET __preg8(KSEG1 + 0x0C000019) /* SIU Reset Register (R/W) */
-#define VR4181_SIUACTMSK __preg8(KSEG1 + 0x0C00001C) /* SIU Activity Mask (R/W) */
-#define VR4181_SIUACTTMR __preg8(KSEG1 + 0x0C00001E) /* SIU Activity Timer (R/W) */
-#define VR4181_SIURB_2 __preg8(KSEG1 + 0x0C000000) /* Receive Buffer Register (Read) (R) */
-#define VR4181_SIUTH_2 __preg8(KSEG1 + 0x0C000000) /* Transmitter Holding Register (Write) (W) */
-#define VR4181_SIUDLL_2 __preg8(KSEG1 + 0x0C000000) /* Divisor Latch (Least Significant Byte) (R/W) */
-#define VR4181_SIUIE_2 __preg8(KSEG1 + 0x0C000001) /* Interrupt Enable (DLAB = 0) (R/W) */
-#define VR4181_SIUDLM_2 __preg8(KSEG1 + 0x0C000001) /* Divisor Latch (Most Significant Byte) (DLAB = 1) (R/W) */
-#define VR4181_SIUIID_2 __preg8(KSEG1 + 0x0C000002) /* Interrupt Identification Register (Read) (R) */
-#define VR4181_SIUFC_2 __preg8(KSEG1 + 0x0C000002) /* FIFO Control Register (Write) (W) */
-#define VR4181_SIULC_2 __preg8(KSEG1 + 0x0C000003) /* Line Control Register (R/W) */
-#define VR4181_SIUMC_2 __preg8(KSEG1 + 0x0C000004) /* Modem Control Register (R/W) */
-#define VR4181_SIULS_2 __preg8(KSEG1 + 0x0C000005) /* Line Status Register (R/W) */
-#define VR4181_SIUMS_2 __preg8(KSEG1 + 0x0C000006) /* Modem Status Register (R/W) */
-#define VR4181_SIUSC_2 __preg8(KSEG1 + 0x0C000007) /* Scratch Register (R/W) */
-#define VR4181_SIUIRSEL_2 __preg8(KSEG1 + 0x0C000008) /* SIU IrDA Selectot (R/W) */
-#define VR4181_SIURESET_2 __preg8(KSEG1 + 0x0C000009) /* SIU Reset Register (R/W) */
-#define VR4181_SIUCSEL_2 __preg8(KSEG1 + 0x0C00000A) /* IrDA Echo-back Control (R/W) */
-#define VR4181_SIUACTMSK_2 __preg8(KSEG1 + 0x0C00000C) /* SIU Activity Mask Register (R/W) */
-#define VR4181_SIUACTTMR_2 __preg8(KSEG1 + 0x0C00000E) /* SIU Activity Timer Register (R/W) */
-
-
-// USB Module
-#define VR4181_USBINFIFO __preg16(KSEG1 + 0x0B000780) /* USB Bulk Input FIFO (Bulk In End Point) (W) */
-#define VR4181_USBOUTFIFO __preg16(KSEG1 + 0x0B000782) /* USB Bulk Output FIFO (Bulk Out End Point) (R) */
-#define VR4181_USBCTLFIFO __preg16(KSEG1 + 0x0B000784) /* USB Control FIFO (Control End Point) (W) */
-#define VR4181_USBSTAT __preg16(KSEG1 + 0x0B000786) /* Interrupt Status Register (R/W) */
-#define VR4181_USBINTMSK __preg16(KSEG1 + 0x0B000788) /* Interrupt Mask Register (R/W) */
-#define VR4181_USBCTLREG __preg16(KSEG1 + 0x0B00078A) /* Control Register (R/W) */
-#define VR4181_USBSTPREG __preg16(KSEG1 + 0x0B00078C) /* USB Transfer Stop Register (R/W) */
-
-// LCD Controller
-#define VR4181_HRTOTALREG __preg16(KSEG1 + 0x0A000400) /* Horizontal total Register (R/W) */
-#define VR4181_HRVISIBREG __preg16(KSEG1 + 0x0A000402) /* Horizontal Visible Register (R/W) */
-#define VR4181_LDCLKSTREG __preg16(KSEG1 + 0x0A000404) /* Load clock start Register (R/W) */
-#define VR4181_LDCLKNDREG __preg16(KSEG1 + 0x0A000406) /* Load clock end Register (R/W) */
-#define VR4181_VRTOTALREG __preg16(KSEG1 + 0x0A000408) /* Vertical Total Register (R/W) */
-#define VR4181_VRVISIBREG __preg16(KSEG1 + 0x0A00040A) /* Vertical Visible Register (R/W) */
-#define VR4181_FVSTARTREG __preg16(KSEG1 + 0x0A00040C) /* FLM vertical start Register (R/W) */
-#define VR4181_FVENDREG __preg16(KSEG1 + 0x0A00040E) /* FLM vertical end Register (R/W) */
-#define VR4181_LCDCTRLREG __preg16(KSEG1 + 0x0A000410) /* LCD control Register (R/W) */
-#define VR4181_LCDINRQREG __preg16(KSEG1 + 0x0A000412) /* LCD Interrupt request Register (R/W) */
-#define VR4181_LCDCFGREG0 __preg16(KSEG1 + 0x0A000414) /* LCD Configuration Register 0 (R/W) */
-#define VR4181_LCDCFGREG1 __preg16(KSEG1 + 0x0A000416) /* LCD Configuration Register 1 (R/W) */
-#define VR4181_FBSTAD1REG __preg16(KSEG1 + 0x0A000418) /* Frame Buffer Start Address 1 Register (R/W) */
-#define VR4181_FBSTAD2REG __preg16(KSEG1 + 0x0A00041A) /* Frame Buffer Start Address 2 Register (R/W) */
-#define VR4181_FBNDAD1REG __preg16(KSEG1 + 0x0A000420) /* Frame Buffer End Address 1 Register (R/W) */
-#define VR4181_FBNDAD2REG __preg16(KSEG1 + 0x0A000422) /* Frame Buffer End Address 2 register (R/W) */
-#define VR4181_FHSTARTREG __preg16(KSEG1 + 0x0A000424) /* FLM horizontal Start Register (R/W) */
-#define VR4181_FHENDREG __preg16(KSEG1 + 0x0A000426) /* FLM horizontal End Register (R/W) */
-#define VR4181_PWRCONREG1 __preg16(KSEG1 + 0x0A000430) /* Power Control register 1 (R/W) */
-#define VR4181_PWRCONREG2 __preg16(KSEG1 + 0x0A000432) /* Power Control register 2 (R/W) */
-#define VR4181_LCDIMSKREG __preg16(KSEG1 + 0x0A000434) /* LCD Interrupt Mask register (R/W) */
-#define VR4181_CPINDCTREG __preg16(KSEG1 + 0x0A00047E) /* Color palette Index and control Register (R/W) */
-#define VR4181_CPALDATREG __preg32(KSEG1 + 0x0A000480) /* Color palette data register (32bits Register) (R/W) */
-
-// physical address spaces
-#define VR4181_LCD 0x0a000000
-#define VR4181_INTERNAL_IO_2 0x0b000000
-#define VR4181_INTERNAL_IO_1 0x0c000000
-#define VR4181_ISA_MEM 0x10000000
-#define VR4181_ISA_IO 0x14000000
-#define VR4181_ROM 0x18000000
-
-// This is the base address for IO port decoding to which the 16 bit IO port address
-// is added. Defining it to 0 will usually cause a kernel oops any time port IO is
-// attempted, which can be handy for turning up parts of the kernel that make
-// incorrect architecture assumptions (by assuming that everything acts like a PC),
-// but we need it correctly defined to use the PCMCIA/CF controller:
-#define VR4181_PORT_BASE (KSEG1 + VR4181_ISA_IO)
-#define VR4181_ISAMEM_BASE (KSEG1 + VR4181_ISA_MEM)
-
-#endif /* __ASM_VR4181_VR4181_H */
git.openpandora.org / pandora-kernel.git / commitdiff