#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/aer.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
lpfc_link_speed_show, lpfc_link_speed_store);
+/*
+# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
+# 0 = aer disabled or not supported
+# 1 = aer supported and enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+
+/**
+ * lpfc_aer_support_store - Set the adapter for aer support
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string "selective".
+ * @count: unused variable.
+ *
+ * Description:
+ * If the val is 1 and currently the device's AER capability was not
+ * enabled, invoke the kernel's enable AER helper routine, trying to
+ * enable the device's AER capability. If the helper routine enabling
+ * AER returns success, update the device's cfg_aer_support flag to
+ * indicate AER is supported by the device; otherwise, if the device
+ * AER capability is already enabled to support AER, then do nothing.
+ *
+ * If the val is 0 and currently the device's AER support was enabled,
+ * invoke the kernel's disable AER helper routine. After that, update
+ * the device's cfg_aer_support flag to indicate AER is not supported
+ * by the device; otherwise, if the device AER capability is already
+ * disabled from supporting AER, then do nothing.
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0, rc = -EINVAL;
+
+ if (!isdigit(buf[0]))
+ return -EINVAL;
+ if (sscanf(buf, "%i", &val) != 1)
+ return -EINVAL;
+
+ switch (val) {
+ case 0:
+ if (phba->hba_flag & HBA_AER_ENABLED) {
+ rc = pci_disable_pcie_error_reporting(phba->pcidev);
+ if (!rc) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_AER_ENABLED;
+ spin_unlock_irq(&phba->hbalock);
+ phba->cfg_aer_support = 0;
+ rc = strlen(buf);
+ } else
+ rc = -EINVAL;
+ } else
+ phba->cfg_aer_support = 0;
+ rc = strlen(buf);
+ break;
+ case 1:
+ if (!(phba->hba_flag & HBA_AER_ENABLED)) {
+ rc = pci_enable_pcie_error_reporting(phba->pcidev);
+ if (!rc) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= HBA_AER_ENABLED;
+ spin_unlock_irq(&phba->hbalock);
+ phba->cfg_aer_support = 1;
+ rc = strlen(buf);
+ } else
+ rc = -EINVAL;
+ } else
+ phba->cfg_aer_support = 1;
+ rc = strlen(buf);
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+ return rc;
+}
+
+static int lpfc_aer_support = 1;
+module_param(lpfc_aer_support, int, 1);
+MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
+lpfc_param_show(aer_support)
+
+/**
+ * lpfc_aer_support_init - Set the initial adapters aer support flag
+ * @phba: lpfc_hba pointer.
+ * @val: link speed value.
+ *
+ * Description:
+ * If val is in a valid range [0,1], then set the adapter's initial
+ * cfg_aer_support field. It will be up to the driver's probe_one
+ * routine to determine whether the device's AER support can be set
+ * or not.
+ *
+ * Notes:
+ * If the value is not in range log a kernel error message, and
+ * choose the default value of setting AER support and return.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_aer_support_init(struct lpfc_hba *phba, int val)
+{
+ if (val == 0 || val == 1) {
+ phba->cfg_aer_support = val;
+ return 0;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2712 lpfc_aer_support attribute value %d out "
+ "of range, allowed values are 0|1, setting it "
+ "to default value of 1\n", val);
+ phba->cfg_aer_support = 1;
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR,
+ lpfc_aer_support_show, lpfc_aer_support_store);
+
+/**
+ * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string "selective".
+ * @count: unused variable.
+ *
+ * Description:
+ * If the @buf contains 1 and the device currently has the AER support
+ * enabled, then invokes the kernel AER helper routine
+ * pci_cleanup_aer_uncorrect_error_status to clean up the uncorrectable
+ * error status register.
+ *
+ * Notes:
+ *
+ * Returns:
+ * -EINVAL if the buf does not contain the 1 or the device is not currently
+ * enabled with the AER support.
+ **/
+static ssize_t
+lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val, rc = -1;
+
+ if (!isdigit(buf[0]))
+ return -EINVAL;
+ if (sscanf(buf, "%i", &val) != 1)
+ return -EINVAL;
+
+ if (val == 1 && phba->hba_flag & HBA_AER_ENABLED)
+ rc = pci_cleanup_aer_uncorrect_error_status(phba->pcidev);
+
+ if (rc == 0)
+ return strlen(buf);
+ else
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,
+ lpfc_aer_cleanup_state);
+
/*
# lpfc_fcp_class: Determines FC class to use for the FCP protocol.
# Value range is [2,3]. Default value is 3.
&dev_attr_lpfc_max_scsicmpl_time,
&dev_attr_lpfc_stat_data_ctrl,
&dev_attr_lpfc_prot_sg_seg_cnt,
+ &dev_attr_lpfc_aer_support,
+ &dev_attr_lpfc_aer_state_cleanup,
NULL,
};
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
lpfc_enable_fip_init(phba, lpfc_enable_fip);
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+ lpfc_aer_support_init(phba, lpfc_aer_support);
return;
}
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
+#include <linux/aer.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
/* Restore device state from PCI config space */
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
return 0;
}
+/**
+ * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot reset. It
+ * disables the device interrupt and pci device, and aborts the internal FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2710 PCI channel I/O frozen\n");
+ /* Disable interrupt and pci device */
+ lpfc_sli_disable_intr(phba);
+ pci_disable_device(phba->pcidev);
+ /*
+ * There may be I/Os dropped by the firmware.
+ * Error iocb (I/O) on txcmplq and let the SCSI layer
+ * retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+}
+
+/**
+ * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot permanently
+ * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2711 PCI channel I/O permanent failure\n");
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+ /* Clean up all driver's outstanding SCSI I/Os */
+ lpfc_sli_flush_fcp_rings(phba);
+}
+
/**
* lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* as desired.
*
* Return codes
+ * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
* PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
- if (state == pci_channel_io_perm_failure) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0472 PCI channel I/O permanent failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
- /* Clean up all driver's outstanding SCSI I/Os */
- lpfc_sli_flush_fcp_rings(phba);
+ switch (state) {
+ case pci_channel_io_normal:
+ /* Non-fatal error, do nothing */
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ /* Fatal error, prepare for slot reset */
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ /* Permanent failure, prepare for device down */
+ lpfc_prep_dev_for_perm_failure(phba);
return PCI_ERS_RESULT_DISCONNECT;
+ default:
+ /* Unknown state, prepare and request slot reset */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0472 Unknown PCI error state: x%x\n", state);
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
}
-
- pci_disable_device(pdev);
- /*
- * There may be I/Os dropped by the firmware.
- * Error iocb (I/O) on txcmplq and let the SCSI layer
- * retry it after re-establishing link.
- */
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
-
- /* Disable interrupt */
- lpfc_sli_disable_intr(phba);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
}
/**
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Bring the device online */
lpfc_online(phba);
+
+ /* Clean up Advanced Error Reporting (AER) if needed */
+ if (phba->hba_flag & HBA_AER_ENABLED)
+ pci_cleanup_aer_uncorrect_error_status(pdev);
}
/**
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
+#include <linux/aer.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
struct lpfc_sli *psli;
volatile uint32_t word0;
void __iomem *to_slim;
+ uint32_t hba_aer_enabled;
spin_lock_irq(&phba->hbalock);
+ /* Take PCIe device Advanced Error Reporting (AER) state */
+ hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
+
psli = &phba->sli;
/* Restart HBA */
/* Give the INITFF and Post time to settle. */
mdelay(100);
+ /* Reset HBA AER if it was enabled, note hba_flag was reset above */
+ if (hba_aer_enabled)
+ pci_disable_pcie_error_reporting(phba->pcidev);
+
lpfc_hba_down_post(phba);
return 0;
if (rc)
goto lpfc_sli_hba_setup_error;
+ /* Enable PCIe device Advanced Error Reporting (AER) if configured */
+ if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
+ rc = pci_enable_pcie_error_reporting(phba->pcidev);
+ if (!rc) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2709 This device supports "
+ "Advanced Error Reporting (AER)\n");
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= HBA_AER_ENABLED;
+ spin_unlock_irq(&phba->hbalock);
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2708 This device does not support "
+ "Advanced Error Reporting (AER)\n");
+ phba->cfg_aer_support = 0;
+ }
+ }
+
if (phba->sli_rev == 3) {
phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE;
phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE;
git.openpandora.org / pandora-kernel.git / commitdiff