ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes

Use usbhs_init_phys() to register the PHY's RESET regulator
and NOP PHY device. VAUX2 supplies the PHY's VCC.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2bba362..1004d2a 100644 (file)
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -346,7 +346,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
 };
 
 static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-       REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+       REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"),     /* hsusb port 2 */
 };
 
 /* ads7846 on SPI and 2 nub controllers on I2C */
@@ -561,6 +561,14 @@ fail:
        printk(KERN_ERR "wl1251 board initialisation failed\n");
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+       {
+               .port = 2,
+               .reset_gpio = 16,
+               .vcc_gpio = -EINVAL,
+       },
+};
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
        &pandora_leds_gpio,
        &pandora_keys_gpio,
@@ -569,15 +577,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-       .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-       .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-       .phy_reset  = true,
-       .reset_gpio_port[0]  = -EINVAL,
-       .reset_gpio_port[1]  = 16,
-       .reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -601,7 +601,10 @@ static void __init omap3pandora_init(void)
        spi_register_board_info(omap3pandora_spi_board_info,
                        ARRAY_SIZE(omap3pandora_spi_board_info));
        omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
+
+       usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
        usbhs_init(&usbhs_bdata);
+
        usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
        usb_musb_init(NULL);
        gpmc_nand_init(&pandora_nand_data, NULL);