#include <plat/gpmc.h>
#include <plat/dma.h>
-#include <asm/tlbflush.h>
-
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
}
#endif
-/* Scratchpad offsets */
-#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
-#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
-#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
-
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
return IRQ_HANDLED;
}
-/* Function to restore the table entry that was modified for enabling MMU */
-static void restore_table_entry(void)
+static void omap34xx_do_sram_idle(unsigned long save_state)
{
- void __iomem *scratchpad_address;
- u32 previous_value, control_reg_value;
- u32 *address;
-
- scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
-
- /* Get address of entry that was modified */
- address = (u32 *)__raw_readl(scratchpad_address +
- OMAP343X_TABLE_ADDRESS_OFFSET);
- /* Get the previous value which needs to be restored */
- previous_value = __raw_readl(scratchpad_address +
- OMAP343X_TABLE_VALUE_OFFSET);
- address = __va(address);
- *address = previous_value;
- flush_tlb_all();
- control_reg_value = __raw_readl(scratchpad_address
- + OMAP343X_CONTROL_REG_VALUE_OFFSET);
- /* This will enable caches and prediction */
- set_cr(control_reg_value);
+ _omap_sram_idle(omap3_arm_context, save_state);
}
void omap_sram_idle(void)
sdrc_pwr = sdrc_read_reg(SDRC_POWER);
/*
- * omap3_arm_context is the location where ARM registers
- * get saved. The restore path then reads from this
- * location and restores them back.
+ * omap3_arm_context is the location where some ARM context
+ * get saved. The rest is placed on the stack, and restored
+ * from there before resuming.
*/
- _omap_sram_idle(omap3_arm_context, save_state);
- cpu_init();
+ if (save_state == 1 || save_state == 3)
+ cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, save_state,
+ omap34xx_do_sram_idle);
+ else
+ omap34xx_do_sram_idle(save_state);
/* Restore normal SDRC POWER settings */
if (omap_rev() >= OMAP3430_REV_ES3_0 &&
core_next_state == PWRDM_POWER_OFF)
sdrc_write_reg(sdrc_pwr, SDRC_POWER);
- /* Restore table entry modified during MMU restoration */
- if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
- restore_table_entry();
-
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
stmia r8!, {r4-r5} @ Push parameters for restore call
- /* Check what that target sleep state is from r1 */
- cmp r1, #0x2 @ Only L2 lost, no need to save context
- beq clean_caches
-
-l1_logic_lost:
- mov r4, sp @ Store sp
- mrs r5, spsr @ Store spsr
- mov r6, lr @ Store lr
- stmia r8!, {r4-r6}
-
- mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register
- mrc p15, 0, r5, c2, c0, 0 @ TTBR0
- mrc p15, 0, r6, c2, c0, 1 @ TTBR1
- mrc p15, 0, r7, c2, c0, 2 @ TTBCR
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mrc p15, 0, r5, c10, c2, 0 @ PRRR
- mrc p15, 0, r6, c10, c2, 1 @ NMRR
- stmia r8!,{r4-r6}
-
- mrc p15, 0, r4, c13, c0, 1 @ Context ID
- mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- mrs r7, cpsr @ Store current cpsr
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c1, c0, 0 @ save control register
- stmia r8!, {r4}
-
-clean_caches:
/*
* jump out to kernel flush routine
* - reuse that code is better
orr r1, r1, #2 @ re-enable L2 cache
mcr p15, 0, r1, c1, c0, 1
skipl2reen:
- mov r1, #0
- /*
- * Invalidate all instruction caches to PoU
- * and flush branch target cache
- */
- mcr p15, 0, r1, c7, c5, 0
- ldr r4, scratchpad_base
- ldr r3, [r4,#0xBC]
- adds r3, r3, #16
-
- ldmia r3!, {r4-r6}
- mov sp, r4 @ Restore sp
- msr spsr_cxsf, r5 @ Restore spsr
- mov lr, r6 @ Restore lr
-
- ldmia r3!, {r4-r7}
- mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register
- mcr p15, 0, r5, c2, c0, 0 @ TTBR0
- mcr p15, 0, r6, c2, c0, 1 @ TTBR1
- mcr p15, 0, r7, c2, c0, 2 @ TTBCR
-
- ldmia r3!,{r4-r6}
- mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mcr p15, 0, r5, c10, c2, 0 @ PRRR
- mcr p15, 0, r6, c10, c2, 1 @ NMRR
-
-
- ldmia r3!,{r4-r7}
- mcr p15, 0, r4, c13, c0, 1 @ Context ID
- mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- msr cpsr, r7 @ store cpsr
-
- /* Enabling MMU here */
- mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
- /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
- and r7, #0x7
- cmp r7, #0x0
- beq usettbr0
-ttbr_error:
- /*
- * More work needs to be done to support N[0:2] value other than 0
- * So looping here so that the error can be detected
- */
- b ttbr_error
-usettbr0:
- mrc p15, 0, r2, c2, c0, 0
- ldr r5, ttbrbit_mask
- and r2, r5
- mov r4, pc
- ldr r5, table_index_mask
- and r4, r5 @ r4 = 31 to 20 bits of pc
- /* Extract the value to be written to table entry */
- ldr r1, table_entry
- /* r1 has the value to be written to table entry*/
- add r1, r1, r4
- /* Getting the address of table entry to modify */
- lsr r4, #18
- /* r2 has the location which needs to be modified */
- add r2, r4
- /* Storing previous entry of location being modified */
- ldr r5, scratchpad_base
- ldr r4, [r2]
- str r4, [r5, #0xC0]
- /* Modify the table entry */
- str r1, [r2]
- /*
- * Storing address of entry being modified
- * - will be restored after enabling MMU
- */
- ldr r5, scratchpad_base
- str r2, [r5, #0xC4]
-
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
- mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
- mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
- mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
- /*
- * Restore control register. This enables the MMU.
- * The caches and prediction are not enabled here, they
- * will be enabled after restoring the MMU table entry.
- */
- ldmia r3!, {r4}
- /* Store previous value of control register in scratchpad */
- str r4, [r5, #0xC8]
- ldr r2, cache_pred_disable_mask
- and r4, r2
- mcr p15, 0, r4, c1, c0, 0
- dsb
- isb
- ldr r0, =restoremmu_on
- bx r0
-
-/*
- * ==============================
- * == Exit point from OFF mode ==
- * ==============================
- */
-restoremmu_on:
- ldmfd sp!, {r4 - r11, pc} @ restore regs and return
+ /* Now branch to the common CPU resume function */
+ b cpu_resume
+ .ltorg
/*
* Internal functions
.word SRAM_BASE_P + 0x8000
sdrc_power:
.word SDRC_POWER_V
-ttbrbit_mask:
- .word 0xFFFFC000
-table_index_mask:
- .word 0xFFF00000
-table_entry:
- .word 0x00000C02
-cache_pred_disable_mask:
- .word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
control_mem_rta:
git.openpandora.org / pandora-kernel.git / commitdiff