* chips. The MAX6680 and MAX6681 only differ in the pinout so they can
* be treated identically.
*
+ * This driver also supports the MAX6695 and MAX6696, two other sensor
+ * chips made by Maxim. These are also quite similar to other Maxim
+ * chips, but support three temperature sensors instead of two. MAX6695
+ * and MAX6696 only differ in the pinout so they can be treated identically.
+ *
* This driver also supports the ADT7461 chip from Analog Devices.
* It's supported in both compatibility and extended mode. It is mostly
* compatible with LM90 except for a data format difference for the
0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
- max6646, w83l771 };
+ max6646, w83l771, max6696 };
/*
* The LM90 registers
#define LM90_REG_R_TCRIT_HYST 0x21
#define LM90_REG_W_TCRIT_HYST 0x21
-/* MAX6646/6647/6649/6657/6658/6659 registers */
+/* MAX6646/6647/6649/6657/6658/6659/6695/6696 registers */
#define MAX6657_REG_R_LOCAL_TEMPL 0x11
+#define MAX6696_REG_R_STATUS2 0x12
#define MAX6659_REG_R_REMOTE_EMERG 0x16
#define MAX6659_REG_W_REMOTE_EMERG 0x16
#define MAX6659_REG_R_LOCAL_EMERG 0x17
#define LM90_HAVE_LOCAL_EXT (1 << 2) /* extended local temperature */
#define LM90_HAVE_REM_LIMIT_EXT (1 << 3) /* extended remote limit */
#define LM90_HAVE_EMERGENCY (1 << 4) /* 3rd upper (emergency) limit */
+#define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm */
+#define LM90_HAVE_TEMP3 (1 << 6) /* 3rd temperature sensor */
/*
* Functions declaration
static void lm90_alert(struct i2c_client *client, unsigned int flag);
static int lm90_remove(struct i2c_client *client);
static struct lm90_data *lm90_update_device(struct device *dev);
+static inline void lm90_select_remote_channel(struct i2c_client *client,
+ struct lm90_data *data,
+ int channel);
/*
* Driver data (common to all clients)
{ "max6659", max6659 },
{ "max6680", max6680 },
{ "max6681", max6680 },
+ { "max6695", max6696 },
+ { "max6696", max6696 },
{ "w83l771", w83l771 },
{ }
};
int flags;
u8 config_orig; /* Original configuration register value */
- u8 alert_alarms; /* Which alarm bits trigger ALERT# */
+ u16 alert_alarms; /* Which alarm bits trigger ALERT# */
+ /* Upper 8 bits for max6695/96 */
/* registers values */
- s8 temp8[6]; /* 0: local low limit
+ s8 temp8[8]; /* 0: local low limit
1: local high limit
2: local critical limit
3: remote critical limit
- 4: local emergency limit (max6659 only)
- 5: remote emergency limit (max6659 only) */
- s16 temp11[5]; /* 0: remote input
+ 4: local emergency limit (max6659 and max6695/96)
+ 5: remote emergency limit (max6659 and max6695/96)
+ 6: remote 2 critical limit (max6695/96 only)
+ 7: remote 2 emergency limit (max6695/96 only) */
+ s16 temp11[8]; /* 0: remote input
1: remote low limit
2: remote high limit
- 3: remote offset (except max6646 and max6657/58/59)
- 4: local input */
+ 3: remote offset (except max6646, max6657/58/59,
+ and max6695/96)
+ 4: local input
+ 5: remote 2 input (max6695/96 only)
+ 6: remote 2 low limit (max6695/96 only)
+ 7: remote 2 high limit (ma6695/96 only) */
u8 temp_hyst;
- u8 alarms; /* bitvector */
+ u16 alarms; /* bitvector (upper 8 bits for max6695/96) */
};
/*
static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
{
- static const u8 reg[6] = {
+ static const u8 reg[8] = {
LM90_REG_W_LOCAL_LOW,
LM90_REG_W_LOCAL_HIGH,
LM90_REG_W_LOCAL_CRIT,
LM90_REG_W_REMOTE_CRIT,
MAX6659_REG_W_LOCAL_EMERG,
MAX6659_REG_W_REMOTE_EMERG,
+ LM90_REG_W_REMOTE_CRIT,
+ MAX6659_REG_W_REMOTE_EMERG,
};
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
data->temp8[nr] = temp_to_u8(val);
else
data->temp8[nr] = temp_to_s8(val);
+
+ lm90_select_remote_channel(client, data, nr >= 6);
i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]);
+ lm90_select_remote_channel(client, data, 0);
+
mutex_unlock(&data->update_lock);
return count;
}
struct {
u8 high;
u8 low;
- } reg[3] = {
- { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL },
- { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL },
- { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL }
+ int channel;
+ } reg[5] = {
+ { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 0 },
+ { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 0 },
+ { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL, 0 },
+ { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 1 },
+ { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 }
};
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
else
data->temp11[index] = temp_to_s8(val) << 8;
+ lm90_select_remote_channel(client, data, reg[nr].channel);
i2c_smbus_write_byte_data(client, reg[nr].high,
data->temp11[index] >> 8);
if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
i2c_smbus_write_byte_data(client, reg[nr].low,
data->temp11[index] & 0xff);
+ lm90_select_remote_channel(client, data, 0);
+
mutex_unlock(&data->update_lock);
return count;
}
.attrs = lm90_emergency_attributes,
};
+static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 13);
+
+static struct attribute *lm90_emergency_alarm_attributes[] = {
+ &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group lm90_emergency_alarm_group = {
+ .attrs = lm90_emergency_alarm_attributes,
+};
+
+/*
+ * Additional attributes for devices with 3 temperature sensors
+ */
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL, 0, 5);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp11,
+ set_temp11, 3, 6);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp11,
+ set_temp11, 4, 7);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp8,
+ set_temp8, 6);
+static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp3_emergency, S_IWUSR | S_IRUGO, show_temp8,
+ set_temp8, 7);
+static SENSOR_DEVICE_ATTR(temp3_emergency_hyst, S_IRUGO, show_temphyst,
+ NULL, 7);
+
+static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp3_emergency_alarm, S_IRUGO, show_alarm, NULL, 14);
+
+static struct attribute *lm90_temp3_attributes[] = {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_emergency.dev_attr.attr,
+ &sensor_dev_attr_temp3_emergency_hyst.dev_attr.attr,
+
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_emergency_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group lm90_temp3_group = {
+ .attrs = lm90_temp3_attributes,
+};
+
/* pec used for ADM1032 only */
static ssize_t show_pec(struct device *dev, struct device_attribute *dummy,
char *buf)
return 0;
}
+/*
+ * client->update_lock must be held when calling this function (unless we are
+ * in detection or initialization steps), and while a remote channel other
+ * than channel 0 is selected. Also, calling code must make sure to re-select
+ * external channel 0 before releasing the lock. This is necessary because
+ * various registers have different meanings as a result of selecting a
+ * non-default remote channel.
+ */
+static inline void lm90_select_remote_channel(struct i2c_client *client,
+ struct lm90_data *data,
+ int channel)
+{
+ u8 config;
+
+ if (data->kind == max6696) {
+ lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+ config &= ~0x08;
+ if (channel)
+ config |= 0x08;
+ i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+ config);
+ }
+}
+
/* Return 0 if detection is successful, -ENODEV otherwise */
static int lm90_detect(struct i2c_client *new_client,
struct i2c_board_info *info)
}
} else
if (man_id == 0x4D) { /* Maxim */
+ int reg_emerg, reg_emerg2, reg_status2;
+
+ /*
+ * We read MAX6659_REG_R_REMOTE_EMERG twice, and re-read
+ * LM90_REG_R_MAN_ID in between. If MAX6659_REG_R_REMOTE_EMERG
+ * exists, both readings will reflect the same value. Otherwise,
+ * the readings will be different.
+ */
+ if ((reg_emerg = i2c_smbus_read_byte_data(new_client,
+ MAX6659_REG_R_REMOTE_EMERG)) < 0
+ || i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID) < 0
+ || (reg_emerg2 = i2c_smbus_read_byte_data(new_client,
+ MAX6659_REG_R_REMOTE_EMERG)) < 0
+ || (reg_status2 = i2c_smbus_read_byte_data(new_client,
+ MAX6696_REG_R_STATUS2)) < 0)
+ return -ENODEV;
+
/*
* The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
* register. Reading from that address will return the last
else
name = "max6659";
} else
+ /*
+ * Even though MAX6695 and MAX6696 do not have a chip ID
+ * register, reading it returns 0x01. Bit 4 of the config1
+ * register is unused and should return zero when read. Bit 0 of
+ * the status2 register is unused and should return zero when
+ * read.
+ *
+ * MAX6695 and MAX6696 have an additional set of temperature
+ * limit registers. We can detect those chips by checking if
+ * one of those registers exists.
+ */
+ if (chip_id == 0x01
+ && (reg_config1 & 0x10) == 0x00
+ && (reg_status2 & 0x01) == 0x00
+ && reg_emerg == reg_emerg2
+ && reg_convrate <= 0x07) {
+ name = "max6696";
+ } else
/*
* The chip_id register of the MAX6680 and MAX6681 holds the
* revision of the chip. The lowest bit of the config1 register
static void lm90_remove_files(struct i2c_client *client, struct lm90_data *data)
{
+ if (data->flags & LM90_HAVE_TEMP3)
+ sysfs_remove_group(&client->dev.kobj, &lm90_temp3_group);
+ if (data->flags & LM90_HAVE_EMERGENCY_ALARM)
+ sysfs_remove_group(&client->dev.kobj,
+ &lm90_emergency_alarm_group);
if (data->flags & LM90_HAVE_EMERGENCY)
sysfs_remove_group(&client->dev.kobj,
&lm90_emergency_group);
case lm86:
data->alert_alarms = 0x7b;
break;
+ case max6696:
+ data->alert_alarms = 0x187c;
+ break;
default:
data->alert_alarms = 0x7c;
break;
/* Set chip capabilities */
if (data->kind != max6657 && data->kind != max6659
- && data->kind != max6646)
+ && data->kind != max6646 && data->kind != max6696)
data->flags |= LM90_HAVE_OFFSET;
if (data->kind == max6657 || data->kind == max6659
- || data->kind == max6646)
+ || data->kind == max6646 || data->kind == max6696)
data->flags |= LM90_HAVE_LOCAL_EXT;
if (data->kind != max6657 && data->kind != max6659
- && data->kind != max6646 && data->kind != max6680)
+ && data->kind != max6646 && data->kind != max6680
+ && data->kind != max6696)
data->flags |= LM90_HAVE_REM_LIMIT_EXT;
- if (data->kind == max6659)
+ if (data->kind == max6659 || data->kind == max6696)
data->flags |= LM90_HAVE_EMERGENCY;
+ if (data->kind == max6696)
+ data->flags |= LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3;
+
/* Initialize the LM90 chip */
lm90_init_client(new_client);
if (err)
goto exit_remove_files;
}
+ if (data->flags & LM90_HAVE_EMERGENCY_ALARM) {
+ err = sysfs_create_group(&new_client->dev.kobj,
+ &lm90_emergency_alarm_group);
+ if (err)
+ goto exit_remove_files;
+ }
+ if (data->flags & LM90_HAVE_TEMP3) {
+ err = sysfs_create_group(&new_client->dev.kobj,
+ &lm90_temp3_group);
+ if (err)
+ goto exit_remove_files;
+ }
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
if (data->kind == max6680)
config |= 0x18;
+ /*
+ * Select external channel 0 for max6695/96
+ */
+ if (data->kind == max6696)
+ config &= ~0x08;
+
config &= 0xBF; /* run */
if (config != data->config_orig) /* Only write if changed */
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
static void lm90_alert(struct i2c_client *client, unsigned int flag)
{
struct lm90_data *data = i2c_get_clientdata(client);
- u8 config, alarms;
+ u8 config, alarms, alarms2 = 0;
lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
- if ((alarms & 0x7f) == 0) {
+
+ if (data->kind == max6696)
+ lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms2);
+
+ if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) {
dev_info(&client->dev, "Everything OK\n");
} else {
if (alarms & 0x61)
dev_warn(&client->dev,
"temp%d diode open, please check!\n", 2);
+ if (alarms2 & 0x18)
+ dev_warn(&client->dev,
+ "temp%d out of range, please check!\n", 3);
+
/* Disable ALERT# output, because these chips don't implement
SMBus alert correctly; they should only hold the alert line
low briefly. */
if (time_after(jiffies, data->last_updated + HZ / 2 + HZ / 10)
|| !data->valid) {
u8 h, l;
+ u8 alarms;
dev_dbg(&client->dev, "Updating lm90 data.\n");
lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]);
lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
&data->temp8[5]);
}
- lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
+ lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
+ data->alarms = alarms; /* save as 16 bit value */
+
+ if (data->kind == max6696) {
+ lm90_select_remote_channel(client, data, 1);
+ lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
+ &data->temp8[6]);
+ lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
+ &data->temp8[7]);
+ lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
+ LM90_REG_R_REMOTE_TEMPL, &data->temp11[5]);
+ if (!lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h))
+ data->temp11[6] = h << 8;
+ if (!lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h))
+ data->temp11[7] = h << 8;
+ lm90_select_remote_channel(client, data, 0);
+
+ if (!lm90_read_reg(client, MAX6696_REG_R_STATUS2,
+ &alarms))
+ data->alarms |= alarms << 8;
+ }
/* Re-enable ALERT# output if it was originally enabled and
* relevant alarms are all clear */
git.openpandora.org / pandora-kernel.git / commitdiff