PS3: gelic: add support for port link status

Add support for interrupt driven port link status detection.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 87fc3b7..3b11b1c 100644 (file)
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -87,6 +87,28 @@ static inline void gelic_card_rx_irq_off(struct gelic_card *card)
 {
        gelic_card_set_irq_mask(card, card->ghiintmask & ~GELIC_CARD_RXINT);
 }
+
+static void
+gelic_card_get_ether_port_status(struct gelic_card *card, int inform)
+{
+       u64 v2;
+       struct net_device *ether_netdev;
+
+       lv1_net_control(bus_id(card), dev_id(card),
+                       GELIC_LV1_GET_ETH_PORT_STATUS,
+                       GELIC_LV1_VLAN_TX_ETHERNET, 0, 0,
+                       &card->ether_port_status, &v2);
+
+       if (inform) {
+               ether_netdev = card->netdev;
+               if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
+                       netif_carrier_on(ether_netdev);
+               else
+                       netif_carrier_off(ether_netdev);
+       }
+}
+
+
 /**
  * gelic_descr_get_status -- returns the status of a descriptor
  * @descr: descriptor to look at
@@ -1032,6 +1054,10 @@ static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
                gelic_card_kick_txdma(card, card->tx_chain.tail);
                spin_unlock_irqrestore(&card->tx_dma_lock, flags);
        }
+
+       /* ether port status changed */
+       if (status & GELIC_CARD_PORT_STATUS_CHANGED)
+               gelic_card_get_ether_port_status(card, 1);
        return IRQ_HANDLED;
 }
 
@@ -1128,13 +1154,14 @@ static int gelic_net_open(struct net_device *netdev)
        napi_enable(&card->napi);
 
        card->tx_dma_progress = 0;
-       card->ghiintmask = GELIC_CARD_RXINT | GELIC_CARD_TXINT;
+       card->ghiintmask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
+               GELIC_CARD_PORT_STATUS_CHANGED;
 
        gelic_card_set_irq_mask(card, card->ghiintmask);
        gelic_card_enable_rxdmac(card);
 
        netif_start_queue(netdev);
-       netif_carrier_on(netdev);
+       gelic_card_get_ether_port_status(card, 1);
 
        return 0;
 
@@ -1157,39 +1184,35 @@ static int gelic_ether_get_settings(struct net_device *netdev,
                                    struct ethtool_cmd *cmd)
 {
        struct gelic_card *card = netdev_priv(netdev);
-       int status;
-       u64 v1, v2;
-       int speed, duplex;
 
-       speed = duplex = -1;
-       status = lv1_net_control(bus_id(card), dev_id(card),
-                                GELIC_LV1_GET_ETH_PORT_STATUS,
-                                GELIC_LV1_VLAN_TX_ETHERNET, 0, 0,
-                                &v1, &v2);
-       if (status) {
-               /* link down */
-       } else {
-               if (v1 & GELIC_LV1_ETHER_FULL_DUPLEX) {
-                       duplex = DUPLEX_FULL;
-               } else {
-                       duplex = DUPLEX_HALF;
-               }
+       gelic_card_get_ether_port_status(card, 0);
 
-               if (v1 & GELIC_LV1_ETHER_SPEED_10) {
-                       speed = SPEED_10;
-               } else if (v1 & GELIC_LV1_ETHER_SPEED_100) {
-                       speed = SPEED_100;
-               } else if (v1 & GELIC_LV1_ETHER_SPEED_1000) {
-                       speed = SPEED_1000;
-               }
+       if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
+               cmd->duplex = DUPLEX_FULL;
+       else
+               cmd->duplex = DUPLEX_HALF;
+
+       switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
+       case GELIC_LV1_ETHER_SPEED_10:
+               cmd->speed = SPEED_10;
+               break;
+       case GELIC_LV1_ETHER_SPEED_100:
+               cmd->speed = SPEED_100;
+               break;
+       case GELIC_LV1_ETHER_SPEED_1000:
+               cmd->speed = SPEED_1000;
+               break;
+       default:
+               pr_info("%s: speed unknown\n", __func__);
+               cmd->speed = SPEED_10;
+               break;
        }
+
        cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg |
                        SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
                        SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
                        SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
        cmd->advertising = cmd->supported;
-       cmd->speed = speed;
-       cmd->duplex = duplex;
        cmd->autoneg = AUTONEG_ENABLE; /* always enabled */
        cmd->port = PORT_TP;
 

diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 49695a5..957221f 100644 (file)
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -261,6 +261,8 @@ struct gelic_card {
        atomic_t tx_timeout_task_counter;
        wait_queue_head_t waitq;
 
+       u64 ether_port_status;
+
        struct gelic_descr *tx_top, *rx_top;
        struct gelic_descr descr[0];
 };