Merge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur...
[pandora-kernel.git] / sound / usb / mixer.c
index 60f65ac..ab23869 100644 (file)
@@ -765,10 +765,61 @@ static void usb_mixer_elem_free(struct snd_kcontrol *kctl)
  * interface to ALSA control for feature/mixer units
  */
 
+/* volume control quirks */
+static void volume_control_quirks(struct usb_mixer_elem_info *cval,
+                                 struct snd_kcontrol *kctl)
+{
+       switch (cval->mixer->chip->usb_id) {
+       case USB_ID(0x0471, 0x0101):
+       case USB_ID(0x0471, 0x0104):
+       case USB_ID(0x0471, 0x0105):
+       case USB_ID(0x0672, 0x1041):
+       /* quirk for UDA1321/N101.
+        * note that detection between firmware 2.1.1.7 (N101)
+        * and later 2.1.1.21 is not very clear from datasheets.
+        * I hope that the min value is -15360 for newer firmware --jk
+        */
+               if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
+                   cval->min == -15616) {
+                       snd_printk(KERN_INFO
+                                "set volume quirk for UDA1321/N101 chip\n");
+                       cval->max = -256;
+               }
+               break;
+
+       case USB_ID(0x046d, 0x09a4):
+               if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+                       snd_printk(KERN_INFO
+                               "set volume quirk for QuickCam E3500\n");
+                       cval->min = 6080;
+                       cval->max = 8768;
+                       cval->res = 192;
+               }
+               break;
+
+       case USB_ID(0x046d, 0x0808):
+       case USB_ID(0x046d, 0x0809):
+       case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+       case USB_ID(0x046d, 0x0991):
+       /* Most audio usb devices lie about volume resolution.
+        * Most Logitech webcams have res = 384.
+        * Proboly there is some logitech magic behind this number --fishor
+        */
+               if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+                       snd_printk(KERN_INFO
+                               "set resolution quirk: cval->res = 384\n");
+                       cval->res = 384;
+               }
+               break;
+
+       }
+}
+
 /*
  * retrieve the minimum and maximum values for the specified control
  */
-static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
+static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
+                                  int default_min, struct snd_kcontrol *kctl)
 {
        /* for failsafe */
        cval->min = default_min;
@@ -844,6 +895,9 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
                cval->initialized = 1;
        }
 
+       if (kctl)
+               volume_control_quirks(cval, kctl);
+
        /* USB descriptions contain the dB scale in 1/256 dB unit
         * while ALSA TLV contains in 1/100 dB unit
         */
@@ -864,6 +918,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
        return 0;
 }
 
+#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL)
 
 /* get a feature/mixer unit info */
 static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
@@ -882,7 +937,7 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_
                uinfo->value.integer.max = 1;
        } else {
                if (!cval->initialized) {
-                       get_min_max(cval, 0);
+                       get_min_max_with_quirks(cval, 0, kcontrol);
                        if (cval->initialized && cval->dBmin >= cval->dBmax) {
                                kcontrol->vd[0].access &= 
                                        ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1045,9 +1100,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
                cval->ch_readonly = readonly_mask;
        }
 
-       /* get min/max values */
-       get_min_max(cval, 0);
-
        /* if all channels in the mask are marked read-only, make the control
         * read-only. set_cur_mix_value() will check the mask again and won't
         * issue write commands to read-only channels. */
@@ -1069,6 +1121,9 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
                len = snd_usb_copy_string_desc(state, nameid,
                                kctl->id.name, sizeof(kctl->id.name));
 
+       /* get min/max values */
+       get_min_max_with_quirks(cval, 0, kctl);
+
        switch (control) {
        case UAC_FU_MUTE:
        case UAC_FU_VOLUME:
@@ -1118,51 +1173,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
                break;
        }
 
-       /* volume control quirks */
-       switch (state->chip->usb_id) {
-       case USB_ID(0x0471, 0x0101):
-       case USB_ID(0x0471, 0x0104):
-       case USB_ID(0x0471, 0x0105):
-       case USB_ID(0x0672, 0x1041):
-       /* quirk for UDA1321/N101.
-        * note that detection between firmware 2.1.1.7 (N101)
-        * and later 2.1.1.21 is not very clear from datasheets.
-        * I hope that the min value is -15360 for newer firmware --jk
-        */
-               if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
-                   cval->min == -15616) {
-                       snd_printk(KERN_INFO
-                                "set volume quirk for UDA1321/N101 chip\n");
-                       cval->max = -256;
-               }
-               break;
-
-       case USB_ID(0x046d, 0x09a4):
-               if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
-                       snd_printk(KERN_INFO
-                               "set volume quirk for QuickCam E3500\n");
-                       cval->min = 6080;
-                       cval->max = 8768;
-                       cval->res = 192;
-               }
-               break;
-
-       case USB_ID(0x046d, 0x0808):
-       case USB_ID(0x046d, 0x0809):
-       case USB_ID(0x046d, 0x0991):
-       /* Most audio usb devices lie about volume resolution.
-        * Most Logitech webcams have res = 384.
-        * Proboly there is some logitech magic behind this number --fishor
-        */
-               if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
-                       snd_printk(KERN_INFO
-                               "set resolution quirk: cval->res = 384\n");
-                       cval->res = 384;
-               }
-               break;
-
-       }
-
        range = (cval->max - cval->min) / cval->res;
        /* Are there devices with volume range more than 255? I use a bit more
         * to be sure. 384 is a resolution magic number found on Logitech