* Features:
* o Changes power status of internal codec blocks depending on the
* dynamic configuration of codec internal audio paths and active
- * DAC's/ADC's.
+ * DACs/ADCs.
* o Platform power domain - can support external components i.e. amps and
* mic/meadphone insertion events.
* o Automatic Mic Bias support
/* dapm power sequences - make this per codec in the future */
static int dapm_up_seq[] = {
- snd_soc_dapm_pre, snd_soc_dapm_micbias, snd_soc_dapm_mic,
- snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_dac,
- snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_pga,
- snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_post
+ snd_soc_dapm_pre, snd_soc_dapm_supply, snd_soc_dapm_micbias,
+ snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux,
+ snd_soc_dapm_dac, snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl,
+ snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
+ snd_soc_dapm_post
};
static int dapm_down_seq[] = {
snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
- snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_post
+ snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply,
+ snd_soc_dapm_post
};
-static int dapm_status = 1;
-module_param(dapm_status, int, 0);
-MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries");
-
static void pop_wait(u32 pop_time)
{
if (pop_time)
return kmemdup(_widget, sizeof(*_widget), GFP_KERNEL);
}
+/**
+ * snd_soc_dapm_set_bias_level - set the bias level for the system
+ * @socdev: audio device
+ * @level: level to configure
+ *
+ * Configure the bias (power) levels for the SoC audio device.
+ *
+ * Returns 0 for success else error.
+ */
+static int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
+ enum snd_soc_bias_level level)
+{
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_codec *codec = socdev->card->codec;
+ int ret = 0;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ dev_dbg(socdev->dev, "Setting full bias\n");
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ dev_dbg(socdev->dev, "Setting bias prepare\n");
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ dev_dbg(socdev->dev, "Setting standby bias\n");
+ break;
+ case SND_SOC_BIAS_OFF:
+ dev_dbg(socdev->dev, "Setting bias off\n");
+ break;
+ default:
+ dev_err(socdev->dev, "Setting invalid bias %d\n", level);
+ return -EINVAL;
+ }
+
+ if (card->set_bias_level)
+ ret = card->set_bias_level(card, level);
+ if (ret == 0 && codec->set_bias_level)
+ ret = codec->set_bias_level(codec, level);
+
+ return ret;
+}
+
/* set up initial codec paths */
static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
struct snd_soc_dapm_path *p, int i)
case snd_soc_dapm_dac:
case snd_soc_dapm_micbias:
case snd_soc_dapm_vmid:
+ case snd_soc_dapm_supply:
p->connect = 1;
break;
/* does effect routing - dynamically connected */
}
}
-/* connect mux widget to it's interconnecting audio paths */
+/* connect mux widget to its interconnecting audio paths */
static int dapm_connect_mux(struct snd_soc_codec *codec,
struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
struct snd_soc_dapm_path *path, const char *control_name,
return -ENODEV;
}
-/* connect mixer widget to it's interconnecting audio paths */
+/* connect mixer widget to its interconnecting audio paths */
static int dapm_connect_mixer(struct snd_soc_codec *codec,
struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
struct snd_soc_dapm_path *path, const char *control_name)
path->long_name);
ret = snd_ctl_add(codec->card, path->kcontrol);
if (ret < 0) {
- printk(KERN_ERR "asoc: failed to add dapm kcontrol %s\n",
- path->long_name);
+ printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n",
+ path->long_name,
+ ret);
kfree(path->long_name);
path->long_name = NULL;
return ret;
struct snd_soc_dapm_path *path;
int con = 0;
+ if (widget->id == snd_soc_dapm_supply)
+ return 0;
+
if (widget->id == snd_soc_dapm_adc && widget->active)
return 1;
struct snd_soc_dapm_path *path;
int con = 0;
+ if (widget->id == snd_soc_dapm_supply)
+ return 0;
+
/* active stream ? */
if (widget->id == snd_soc_dapm_dac && widget->active)
return 1;
}
EXPORT_SYMBOL_GPL(dapm_reg_event);
-/*
- * Scan a single DAPM widget for a complete audio path and update the
- * power status appropriately.
+/* Standard power change method, used to apply power changes to most
+ * widgets.
*/
-static int dapm_power_widget(struct snd_soc_codec *codec, int event,
- struct snd_soc_dapm_widget *w)
+static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w)
{
- int in, out, power_change, power, ret;
-
- /* vmid - no action */
- if (w->id == snd_soc_dapm_vmid)
- return 0;
-
- /* active ADC */
- if (w->id == snd_soc_dapm_adc && w->active) {
- in = is_connected_input_ep(w);
- dapm_clear_walk(w->codec);
- w->power = (in != 0) ? 1 : 0;
- dapm_update_bits(w);
- return 0;
- }
-
- /* active DAC */
- if (w->id == snd_soc_dapm_dac && w->active) {
- out = is_connected_output_ep(w);
- dapm_clear_walk(w->codec);
- w->power = (out != 0) ? 1 : 0;
- dapm_update_bits(w);
- return 0;
- }
-
- /* pre and post event widgets */
- if (w->id == snd_soc_dapm_pre) {
- if (!w->event)
- return 0;
-
- if (event == SND_SOC_DAPM_STREAM_START) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_PRE_PMU);
- if (ret < 0)
- return ret;
- } else if (event == SND_SOC_DAPM_STREAM_STOP) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_PRE_PMD);
- if (ret < 0)
- return ret;
- }
- return 0;
- }
- if (w->id == snd_soc_dapm_post) {
- if (!w->event)
- return 0;
-
- if (event == SND_SOC_DAPM_STREAM_START) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_POST_PMU);
- if (ret < 0)
- return ret;
- } else if (event == SND_SOC_DAPM_STREAM_STOP) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_POST_PMD);
- if (ret < 0)
- return ret;
- }
- return 0;
- }
-
- /* all other widgets */
- in = is_connected_input_ep(w);
- dapm_clear_walk(w->codec);
- out = is_connected_output_ep(w);
- dapm_clear_walk(w->codec);
- power = (out != 0 && in != 0) ? 1 : 0;
- power_change = (w->power == power) ? 0 : 1;
- w->power = power;
-
- if (!power_change)
- return 0;
+ int ret;
/* call any power change event handlers */
if (w->event)
w->name, w->event_flags);
/* power up pre event */
- if (power && w->event &&
+ if (w->power && w->event &&
(w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
if (ret < 0)
}
/* power down pre event */
- if (!power && w->event &&
+ if (!w->power && w->event &&
(w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
if (ret < 0)
}
/* Lower PGA volume to reduce pops */
- if (w->id == snd_soc_dapm_pga && !power)
- dapm_set_pga(w, power);
+ if (w->id == snd_soc_dapm_pga && !w->power)
+ dapm_set_pga(w, w->power);
dapm_update_bits(w);
/* Raise PGA volume to reduce pops */
- if (w->id == snd_soc_dapm_pga && power)
- dapm_set_pga(w, power);
+ if (w->id == snd_soc_dapm_pga && w->power)
+ dapm_set_pga(w, w->power);
/* power up post event */
- if (power && w->event &&
+ if (w->power && w->event &&
(w->event_flags & SND_SOC_DAPM_POST_PMU)) {
ret = w->event(w,
NULL, SND_SOC_DAPM_POST_PMU);
}
/* power down post event */
- if (!power && w->event &&
+ if (!w->power && w->event &&
(w->event_flags & SND_SOC_DAPM_POST_PMD)) {
ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
if (ret < 0)
return 0;
}
+/* Generic check to see if a widget should be powered.
+ */
+static int dapm_generic_check_power(struct snd_soc_dapm_widget *w)
+{
+ int in, out;
+
+ in = is_connected_input_ep(w);
+ dapm_clear_walk(w->codec);
+ out = is_connected_output_ep(w);
+ dapm_clear_walk(w->codec);
+ return out != 0 && in != 0;
+}
+
+/* Check to see if an ADC has power */
+static int dapm_adc_check_power(struct snd_soc_dapm_widget *w)
+{
+ int in;
+
+ if (w->active) {
+ in = is_connected_input_ep(w);
+ dapm_clear_walk(w->codec);
+ return in != 0;
+ } else {
+ return dapm_generic_check_power(w);
+ }
+}
+
+/* Check to see if a DAC has power */
+static int dapm_dac_check_power(struct snd_soc_dapm_widget *w)
+{
+ int out;
+
+ if (w->active) {
+ out = is_connected_output_ep(w);
+ dapm_clear_walk(w->codec);
+ return out != 0;
+ } else {
+ return dapm_generic_check_power(w);
+ }
+}
+
+/* Check to see if a power supply is needed */
+static int dapm_supply_check_power(struct snd_soc_dapm_widget *w)
+{
+ struct snd_soc_dapm_path *path;
+ int power = 0;
+
+ /* Check if one of our outputs is connected */
+ list_for_each_entry(path, &w->sinks, list_source) {
+ if (path->sink && path->sink->power_check &&
+ path->sink->power_check(path->sink)) {
+ power = 1;
+ break;
+ }
+ }
+
+ dapm_clear_walk(w->codec);
+
+ return power;
+}
+
+/*
+ * Scan a single DAPM widget for a complete audio path and update the
+ * power status appropriately.
+ */
+static int dapm_power_widget(struct snd_soc_codec *codec, int event,
+ struct snd_soc_dapm_widget *w)
+{
+ int ret;
+
+ switch (w->id) {
+ case snd_soc_dapm_pre:
+ if (!w->event)
+ return 0;
+
+ if (event == SND_SOC_DAPM_STREAM_START) {
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_PRE_PMU);
+ if (ret < 0)
+ return ret;
+ } else if (event == SND_SOC_DAPM_STREAM_STOP) {
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_PRE_PMD);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+
+ case snd_soc_dapm_post:
+ if (!w->event)
+ return 0;
+
+ if (event == SND_SOC_DAPM_STREAM_START) {
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_POST_PMU);
+ if (ret < 0)
+ return ret;
+ } else if (event == SND_SOC_DAPM_STREAM_STOP) {
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_POST_PMD);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+
+ default:
+ return dapm_generic_apply_power(w);
+ }
+}
+
/*
* Scan each dapm widget for complete audio path.
* A complete path is a route that has valid endpoints i.e.:-
*/
static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
{
+ struct snd_soc_device *socdev = codec->socdev;
struct snd_soc_dapm_widget *w;
- int i, c = 1, *seq = NULL, ret = 0;
-
- /* do we have a sequenced stream event */
- if (event == SND_SOC_DAPM_STREAM_START) {
- c = ARRAY_SIZE(dapm_up_seq);
- seq = dapm_up_seq;
- } else if (event == SND_SOC_DAPM_STREAM_STOP) {
- c = ARRAY_SIZE(dapm_down_seq);
- seq = dapm_down_seq;
+ int ret = 0;
+ int i, power;
+ int sys_power = 0;
+
+ INIT_LIST_HEAD(&codec->up_list);
+ INIT_LIST_HEAD(&codec->down_list);
+
+ /* Check which widgets we need to power and store them in
+ * lists indicating if they should be powered up or down.
+ */
+ list_for_each_entry(w, &codec->dapm_widgets, list) {
+ switch (w->id) {
+ case snd_soc_dapm_pre:
+ list_add_tail(&codec->down_list, &w->power_list);
+ break;
+ case snd_soc_dapm_post:
+ list_add_tail(&codec->up_list, &w->power_list);
+ break;
+
+ default:
+ if (!w->power_check)
+ continue;
+
+ power = w->power_check(w);
+ if (power)
+ sys_power = 1;
+
+ if (w->power == power)
+ continue;
+
+ if (power)
+ list_add_tail(&w->power_list, &codec->up_list);
+ else
+ list_add_tail(&w->power_list,
+ &codec->down_list);
+
+ w->power = power;
+ break;
+ }
}
- for (i = 0; i < c; i++) {
- list_for_each_entry(w, &codec->dapm_widgets, list) {
+ /* If we're changing to all on or all off then prepare */
+ if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
+ (!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
+ ret = snd_soc_dapm_set_bias_level(socdev,
+ SND_SOC_BIAS_PREPARE);
+ if (ret != 0)
+ pr_err("Failed to prepare bias: %d\n", ret);
+ }
+ /* Power down widgets first; try to avoid amplifying pops. */
+ for (i = 0; i < ARRAY_SIZE(dapm_down_seq); i++) {
+ list_for_each_entry(w, &codec->down_list, power_list) {
/* is widget in stream order */
- if (seq && seq[i] && w->id != seq[i])
+ if (w->id != dapm_down_seq[i])
continue;
ret = dapm_power_widget(codec, event, w);
if (ret != 0)
- return ret;
+ pr_err("Failed to power down %s: %d\n",
+ w->name, ret);
}
}
+ /* Now power up. */
+ for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++) {
+ list_for_each_entry(w, &codec->up_list, power_list) {
+ /* is widget in stream order */
+ if (w->id != dapm_up_seq[i])
+ continue;
+
+ ret = dapm_power_widget(codec, event, w);
+ if (ret != 0)
+ pr_err("Failed to power up %s: %d\n",
+ w->name, ret);
+ }
+ }
+
+ /* If we just powered the last thing off drop to standby bias */
+ if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
+ ret = snd_soc_dapm_set_bias_level(socdev,
+ SND_SOC_BIAS_STANDBY);
+ if (ret != 0)
+ pr_err("Failed to apply standby bias: %d\n", ret);
+ }
+
+ /* If we just powered up then move to active bias */
+ if (codec->bias_level == SND_SOC_BIAS_PREPARE && sys_power) {
+ ret = snd_soc_dapm_set_bias_level(socdev,
+ SND_SOC_BIAS_ON);
+ if (ret != 0)
+ pr_err("Failed to apply active bias: %d\n", ret);
+ }
+
return 0;
}
case snd_soc_dapm_pga:
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
+ case snd_soc_dapm_supply:
if (w->name) {
in = is_connected_input_ep(w);
dapm_clear_walk(w->codec);
case snd_soc_dapm_pga:
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
+ case snd_soc_dapm_supply:
if (w->name)
count += sprintf(buf + count, "%s: %s\n",
w->name, w->power ? "On":"Off");
int snd_soc_dapm_sys_add(struct device *dev)
{
- if (!dapm_status)
- return 0;
return device_create_file(dev, &dev_attr_dapm_widget);
}
static void snd_soc_dapm_sys_remove(struct device *dev)
{
- if (dapm_status) {
- device_remove_file(dev, &dev_attr_dapm_widget);
- }
+ device_remove_file(dev, &dev_attr_dapm_widget);
}
/* free all dapm widgets and resources */
case snd_soc_dapm_vmid:
case snd_soc_dapm_pre:
case snd_soc_dapm_post:
+ case snd_soc_dapm_supply:
list_add(&path->list, &codec->dapm_paths);
list_add(&path->list_sink, &wsink->sources);
list_add(&path->list_source, &wsource->sinks);
case snd_soc_dapm_switch:
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
+ w->power_check = dapm_generic_check_power;
dapm_new_mixer(codec, w);
break;
case snd_soc_dapm_mux:
case snd_soc_dapm_value_mux:
+ w->power_check = dapm_generic_check_power;
dapm_new_mux(codec, w);
break;
case snd_soc_dapm_adc:
+ w->power_check = dapm_adc_check_power;
+ break;
case snd_soc_dapm_dac:
+ w->power_check = dapm_dac_check_power;
+ break;
case snd_soc_dapm_pga:
+ w->power_check = dapm_generic_check_power;
dapm_new_pga(codec, w);
break;
case snd_soc_dapm_input:
case snd_soc_dapm_hp:
case snd_soc_dapm_mic:
case snd_soc_dapm_line:
+ w->power_check = dapm_generic_check_power;
+ break;
+ case snd_soc_dapm_supply:
+ w->power_check = dapm_supply_check_power;
case snd_soc_dapm_vmid:
case snd_soc_dapm_pre:
case snd_soc_dapm_post:
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event);
-/**
- * snd_soc_dapm_set_bias_level - set the bias level for the system
- * @socdev: audio device
- * @level: level to configure
- *
- * Configure the bias (power) levels for the SoC audio device.
- *
- * Returns 0 for success else error.
- */
-int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
- enum snd_soc_bias_level level)
-{
- struct snd_soc_card *card = socdev->card;
- struct snd_soc_codec *codec = socdev->card->codec;
- int ret = 0;
-
- if (card->set_bias_level)
- ret = card->set_bias_level(card, level);
- if (ret == 0 && codec->set_bias_level)
- ret = codec->set_bias_level(codec, level);
-
- return ret;
-}
-
/**
* snd_soc_dapm_enable_pin - enable pin.
* @codec: SoC codec
* @pin: pin name
*
- * Enables input/output pin and it's parents or children widgets iff there is
+ * Enables input/output pin and its parents or children widgets iff there is
* a valid audio route and active audio stream.
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
* do any widget power switching.
* @codec: SoC codec
* @pin: pin name
*
- * Disables input/output pin and it's parents or children widgets.
+ * Disables input/output pin and its parents or children widgets.
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
* do any widget power switching.
*/
git.openpandora.org / pandora-kernel.git / blobdiff