#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/wm8955.h>
struct wm8955_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8955_MAX_REGISTER + 1];
-
unsigned int mclk_rate;
int deemph;
static int wm8955_add_widgets(struct snd_soc_codec *codec)
{
+ struct snd_soc_dapm_context *dapm = &codec->dapm;
+
snd_soc_add_controls(codec, wm8955_snd_controls,
ARRAY_SIZE(wm8955_snd_controls));
- snd_soc_dapm_new_controls(codec, wm8955_dapm_widgets,
+ snd_soc_dapm_new_controls(dapm, wm8955_dapm_widgets,
ARRAY_SIZE(wm8955_dapm_widgets));
-
- snd_soc_dapm_add_routes(codec, wm8955_intercon,
+ snd_soc_dapm_add_routes(dapm, wm8955_intercon,
ARRAY_SIZE(wm8955_intercon));
return 0;
enum snd_soc_bias_level level)
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
break;
case SND_SOC_BIAS_STANDBY:
- if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
wm8955->supplies);
if (ret != 0) {
/* Sync back cached values if they're
* different from the hardware default.
*/
- for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
+ for (i = 0; i < codec->driver->reg_cache_size; i++) {
if (i == WM8955_RESET)
continue;
- if (wm8955->reg_cache[i] == wm8955_reg[i])
+ if (reg_cache[i] == wm8955_reg[i])
continue;
- snd_soc_write(codec, i, wm8955->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
/* Enable VREF and VMID */
wm8955->supplies);
break;
}
- codec->bias_level = level;
+ codec->dapm.bias_level = level;
return 0;
}
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type);
}
/* Change some default settings - latch VU and enable ZC */
- wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
- wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
- wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
- wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
- wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
- wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
- wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+ reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
+ reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
+ reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
+ reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
+ reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
+ reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
+ reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
/* Also enable adaptive bass boost by default */
- wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+ reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
/* Set platform data values */
if (pdata) {
if (pdata->out2_speaker)
- wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
+ reg_cache[WM8955_ADDITIONAL_CONTROL_2]
|= WM8955_ROUT2INV;
if (pdata->monoin_diff)
- wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
+ reg_cache[WM8955_MONO_OUT_MIX_1]
|= WM8955_DMEN;
}
return -ENOMEM;
i2c_set_clientdata(i2c, wm8955);
+ wm8955->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8955, &wm8955_dai, 1);