static int set_input_clock(struct echoaudio *chip, u16 clock);
static int set_professional_spdif(struct echoaudio *chip, char prof);
static int set_digital_mode(struct echoaudio *chip, u8 mode);
-static int load_asic_generic(struct echoaudio *chip, u32 cmd,
- const struct firmware *asic);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
static int check_asic_status(struct echoaudio *chip);
int err;
DE_INIT(("init_hw() - Layla24\n"));
- snd_assert((subdevice_id & 0xfff0) == LAYLA24, return -ENODEV);
+ if (snd_BUG_ON((subdevice_id & 0xfff0) != LAYLA24))
+ return -ENODEV;
if ((err = init_dsp_comm_page(chip))) {
DE_INIT(("init_hw - could not initialize DSP comm page\n"));
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
chip->has_midi = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_LAYLA24_DSP];
+ chip->dsp_code_to_load = FW_LAYLA24_DSP;
chip->input_clock_types =
ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
return err;
err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
- snd_assert(err >= 0, return err);
+ if (err < 0)
+ return err;
err = set_professional_spdif(chip, TRUE);
DE_INIT(("init_hw done\n"));
/* Load the ASIC for the PCI card */
err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC,
- &card_fw[FW_LAYLA24_1_ASIC]);
+ FW_LAYLA24_1_ASIC);
if (err < 0)
return err;
- chip->asic_code = &card_fw[FW_LAYLA24_2S_ASIC];
+ chip->asic_code = FW_LAYLA24_2S_ASIC;
/* Now give the new ASIC a little time to set up */
mdelay(10);
/* Do the external one */
err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
- &card_fw[FW_LAYLA24_2S_ASIC]);
+ FW_LAYLA24_2S_ASIC);
if (err < 0)
return FALSE;
{
u32 control_reg, clock, base_rate;
- snd_assert(rate < 50000 || chip->digital_mode != DIGITAL_MODE_ADAT,
- return -EINVAL);
+ if (snd_BUG_ON(rate >= 50000 &&
+ chip->digital_mode == DIGITAL_MODE_ADAT))
+ return -EINVAL;
/* Only set the clock for internal mode. */
if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
/* Depending on what digital mode you want, Layla24 needs different ASICs
loaded. This function checks the ASIC needed for the new mode and sees
if it matches the one already loaded. */
-static int switch_asic(struct echoaudio *chip, const struct firmware *asic)
+static int switch_asic(struct echoaudio *chip, short asic)
{
s8 *monitors;
{
u32 control_reg;
int err, incompatible_clock;
- const struct firmware *asic;
+ short asic;
/* Set clock to "internal" if it's not compatible with the new mode */
incompatible_clock = FALSE;
case DIGITAL_MODE_SPDIF_RCA:
if (chip->input_clock == ECHO_CLOCK_ADAT)
incompatible_clock = TRUE;
- asic = &card_fw[FW_LAYLA24_2S_ASIC];
+ asic = FW_LAYLA24_2S_ASIC;
break;
case DIGITAL_MODE_ADAT:
if (chip->input_clock == ECHO_CLOCK_SPDIF)
incompatible_clock = TRUE;
- asic = &card_fw[FW_LAYLA24_2A_ASIC];
+ asic = FW_LAYLA24_2A_ASIC;
break;
default:
DE_ACT(("Digital mode not supported: %d\n", mode));