{ 0x414c4770, 0xfffffff0, "ALC203", NULL, NULL },
{ 0x434d4941, 0xffffffff, "CMI9738", patch_cm9738, NULL },
{ 0x434d4961, 0xffffffff, "CMI9739", patch_cm9739, NULL },
+{ 0x434d4969, 0xffffffff, "CMI9780", patch_cm9780, NULL },
{ 0x434d4978, 0xffffffff, "CMI9761", patch_cm9761, NULL },
{ 0x434d4982, 0xffffffff, "CMI9761", patch_cm9761, NULL },
{ 0x434d4983, 0xffffffff, "CMI9761", patch_cm9761, NULL },
{ 0x4e534331, 0xffffffff, "LM4549", NULL, NULL },
{ 0x4e534350, 0xffffffff, "LM4550", NULL, NULL },
{ 0x50534304, 0xffffffff, "UCB1400", NULL, NULL },
-{ 0x53494c20, 0xffffffe0, "Si3036,8", NULL, mpatch_si3036 },
+{ 0x53494c20, 0xffffffe0, "Si3036,8", mpatch_si3036, mpatch_si3036, AC97_MODEM_PATCH },
{ 0x54524102, 0xffffffff, "TR28022", NULL, NULL },
{ 0x54524106, 0xffffffff, "TR28026", NULL, NULL },
{ 0x54524108, 0xffffffff, "TR28028", patch_tritech_tr28028, NULL }, // added by xin jin [07/09/99]
ac97->regs[reg] = value;
ac97->bus->ops->write(ac97, reg, value);
}
+ set_bit(reg, ac97->reg_accessed);
up(&ac97->reg_mutex);
return change;
}
ac97->regs[reg] = new;
ac97->bus->ops->write(ac97, reg, new);
}
+ set_bit(reg, ac97->reg_accessed);
return change;
}
{
ac97_t *ac97 = snd_kcontrol_chip(kcontrol);
struct ac97_enum *e = (struct ac97_enum *)kcontrol->private_value;
- unsigned short val;
+ unsigned short val, bitmask;
+ for (bitmask = 1; bitmask < e->mask; bitmask <<= 1)
+ ;
val = snd_ac97_read_cache(ac97, e->reg);
- ucontrol->value.enumerated.item[0] = (val >> e->shift_l) & (e->mask - 1);
+ ucontrol->value.enumerated.item[0] = (val >> e->shift_l) & (bitmask - 1);
if (e->shift_l != e->shift_r)
- ucontrol->value.enumerated.item[1] = (val >> e->shift_r) & (e->mask - 1);
+ ucontrol->value.enumerated.item[1] = (val >> e->shift_r) & (bitmask - 1);
return 0;
}
ac97_t *ac97 = snd_kcontrol_chip(kcontrol);
struct ac97_enum *e = (struct ac97_enum *)kcontrol->private_value;
unsigned short val;
- unsigned short mask;
+ unsigned short mask, bitmask;
+ for (bitmask = 1; bitmask < e->mask; bitmask <<= 1)
+ ;
if (ucontrol->value.enumerated.item[0] > e->mask - 1)
return -EINVAL;
val = ucontrol->value.enumerated.item[0] << e->shift_l;
- mask = (e->mask - 1) << e->shift_l;
+ mask = (bitmask - 1) << e->shift_l;
if (e->shift_l != e->shift_r) {
if (ucontrol->value.enumerated.item[1] > e->mask - 1)
return -EINVAL;
val |= ucontrol->value.enumerated.item[1] << e->shift_r;
- mask |= (e->mask - 1) << e->shift_r;
+ mask |= (bitmask - 1) << e->shift_r;
}
return snd_ac97_update_bits(ac97, e->reg, mask, val);
}
static const snd_kcontrol_new_t snd_ac97_control_eapd =
AC97_SINGLE("External Amplifier", AC97_POWERDOWN, 15, 1, 1);
+static const snd_kcontrol_new_t snd_ac97_controls_modem_switches[2] = {
+AC97_SINGLE("Off-hook Switch", AC97_GPIO_STATUS, 0, 1, 0),
+AC97_SINGLE("Caller ID Switch", AC97_GPIO_STATUS, 2, 1, 0)
+};
+
/* change the existing EAPD control as inverted */
static void set_inv_eapd(ac97_t *ac97, snd_kcontrol_t *kctl)
{
for (i = 0 ; i < ARRAY_SIZE(cbit); i++) {
unsigned short val;
snd_ac97_write(ac97, reg, 0x8080 | cbit[i] | (cbit[i] << 8));
+ /* Do the read twice due to buffers on some ac97 codecs.
+ * e.g. The STAC9704 returns exactly what you wrote the the register
+ * if you read it immediately. This causes the detect routine to fail.
+ */
+ val = snd_ac97_read(ac97, reg);
val = snd_ac97_read(ac97, reg);
if (! *lo_max && (val & 0x7f) == cbit[i])
*lo_max = max[i];
static int snd_ac97_modem_build(snd_card_t * card, ac97_t * ac97)
{
- /* TODO */
+ int err, idx;
+
//printk("AC97_GPIO_CFG = %x\n",snd_ac97_read(ac97,AC97_GPIO_CFG));
snd_ac97_write(ac97, AC97_GPIO_CFG, 0xffff & ~(AC97_GPIO_LINE1_OH));
snd_ac97_write(ac97, AC97_GPIO_POLARITY, 0xffff & ~(AC97_GPIO_LINE1_OH));
snd_ac97_write(ac97, AC97_GPIO_STICKY, 0xffff);
snd_ac97_write(ac97, AC97_GPIO_WAKEUP, 0x0);
snd_ac97_write(ac97, AC97_MISC_AFE, 0x0);
+
+ /* build modem switches */
+ for (idx = 0; idx < ARRAY_SIZE(snd_ac97_controls_modem_switches); idx++)
+ if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_controls_modem_switches[idx], ac97))) < 0)
+ return err;
+
+ /* build chip specific controls */
+ if (ac97->build_ops->build_specific)
+ if ((err = ac97->build_ops->build_specific(ac97)) < 0)
+ return err;
+
return 0;
}
goto __access_ok;
}
- snd_ac97_write(ac97, AC97_RESET, 0); /* reset to defaults */
+ /* reset to defaults */
+ if (!(ac97->scaps & AC97_SCAP_SKIP_AUDIO))
+ snd_ac97_write(ac97, AC97_RESET, 0);
+ if (!(ac97->scaps & AC97_SCAP_SKIP_MODEM))
+ snd_ac97_write(ac97, AC97_EXTENDED_MID, 0);
if (bus->ops->wait)
bus->ops->wait(ac97);
else {
/* note: it's important to set the rate at first */
tmp = AC97_MEA_GPIO;
if (ac97->ext_mid & AC97_MEI_LINE1) {
- snd_ac97_write_cache(ac97, AC97_LINE1_RATE, 12000);
+ snd_ac97_write_cache(ac97, AC97_LINE1_RATE, 8000);
tmp |= AC97_MEA_ADC1 | AC97_MEA_DAC1;
}
if (ac97->ext_mid & AC97_MEI_LINE2) {
- snd_ac97_write_cache(ac97, AC97_LINE2_RATE, 12000);
+ snd_ac97_write_cache(ac97, AC97_LINE2_RATE, 8000);
tmp |= AC97_MEA_ADC2 | AC97_MEA_DAC2;
}
if (ac97->ext_mid & AC97_MEI_HANDSET) {
- snd_ac97_write_cache(ac97, AC97_HANDSET_RATE, 12000);
+ snd_ac97_write_cache(ac97, AC97_HANDSET_RATE, 8000);
tmp |= AC97_MEA_HADC | AC97_MEA_HDAC;
}
- snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0xff00 & ~(tmp << 8));
+ snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0);
udelay(100);
/* nothing should be in powerdown mode */
- snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0xff00 & ~(tmp << 8));
+ snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0);
end_time = jiffies + (HZ / 10);
do {
if ((snd_ac97_read(ac97, AC97_EXTENDED_MSTATUS) & tmp) == tmp)
*/
void snd_ac97_resume(ac97_t *ac97)
{
- int i;
+ unsigned long end_time;
if (ac97->bus->ops->reset) {
ac97->bus->ops->reset(ac97);
snd_ac97_write(ac97, AC97_POWERDOWN, ac97->regs[AC97_POWERDOWN]);
if (ac97_is_audio(ac97)) {
ac97->bus->ops->write(ac97, AC97_MASTER, 0x8101);
- for (i = HZ/10; i >= 0; i--) {
+ end_time = jiffies + msecs_to_jiffies(100);
+ do {
if (snd_ac97_read(ac97, AC97_MASTER) == 0x8101)
break;
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1);
- }
+ } while (time_after_eq(end_time, jiffies));
/* FIXME: extra delay */
ac97->bus->ops->write(ac97, AC97_MASTER, 0x8000);
- if (snd_ac97_read(ac97, AC97_MASTER) != 0x8000) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HZ/4);
- }
+ if (snd_ac97_read(ac97, AC97_MASTER) != 0x8000)
+ msleep(250);
} else {
- for (i = HZ/10; i >= 0; i--) {
+ end_time = jiffies + msecs_to_jiffies(100);
+ do {
unsigned short val = snd_ac97_read(ac97, AC97_EXTENDED_MID);
if (val != 0xffff && (val & 1) != 0)
break;
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1);
- }
+ } while (time_after_eq(end_time, jiffies));
}
__reset_ready:
return result;
}
- for (; quirk->vendor; quirk++) {
- if (quirk->vendor != ac97->subsystem_vendor)
+ for (; quirk->subvendor; quirk++) {
+ if (quirk->subvendor != ac97->subsystem_vendor)
continue;
- if ((! quirk->mask && quirk->device == ac97->subsystem_device) ||
- quirk->device == (quirk->mask & ac97->subsystem_device)) {
+ if ((! quirk->mask && quirk->subdevice == ac97->subsystem_device) ||
+ quirk->subdevice == (quirk->mask & ac97->subsystem_device)) {
if (quirk->codec_id && quirk->codec_id != ac97->id)
continue;
snd_printdd("ac97 quirk for %s (%04x:%04x)\n", quirk->name, ac97->subsystem_vendor, ac97->subsystem_device);
git.openpandora.org / pandora-kernel.git / blobdiff