#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/rcupdate.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
pos++;
/* IEEE80211_RADIOTAP_RATE */
- if (status->flag & RX_FLAG_HT) {
+ if (!rate || status->flag & RX_FLAG_HT) {
/*
+ * Without rate information don't add it. If we have,
* MCS information is a separate field in radiotap,
* added below. The byte here is needed as padding
* for the channel though, so initialise it to 0.
else if (status->flag & RX_FLAG_HT)
put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
pos);
- else if (rate->flags & IEEE80211_RATE_ERP_G)
+ else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
pos);
- else
+ else if (rate)
put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
pos);
+ else
+ put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
pos += 2;
/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
struct ieee80211_local *local = rx->local;
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct sta_info *sta = rx->sta;
struct tid_ampdu_rx *tid_agg_rx;
u16 sc;
- int tid;
+ u8 tid, ack_policy;
if (!ieee80211_is_data_qos(hdr->frame_control))
goto dont_reorder;
if (!sta)
goto dont_reorder;
+ ack_policy = *ieee80211_get_qos_ctl(hdr) &
+ IEEE80211_QOS_CTL_ACK_POLICY_MASK;
tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]);
if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC)))
goto dont_reorder;
+ /* not part of a BA session */
+ if (ack_policy != IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK &&
+ ack_policy != IEEE80211_QOS_CTL_ACK_POLICY_NORMAL)
+ goto dont_reorder;
+
+ /* not actually part of this BA session */
+ if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
+ goto dont_reorder;
+
/* new, potentially un-ordered, ampdu frame - process it */
/* reset session timer */
rx->sdata->control_port_protocol)
return RX_CONTINUE;
}
+
+ if (rx->sdata->vif.type == NL80211_IFTYPE_AP &&
+ cfg80211_rx_spurious_frame(rx->sdata->dev,
+ hdr->addr2,
+ GFP_ATOMIC))
+ return RX_DROP_UNUSABLE;
+
return RX_DROP_MONITOR;
}
/*
* If we receive a 4-addr nullfunc frame from a STA
- * that was not moved to a 4-addr STA vlan yet, drop
- * the frame to the monitor interface, to make sure
- * that hostapd sees it
+ * that was not moved to a 4-addr STA vlan yet send
+ * the event to userspace and for older hostapd drop
+ * the frame to the monitor interface.
*/
if (ieee80211_has_a4(hdr->frame_control) &&
(rx->sdata->vif.type == NL80211_IFTYPE_AP ||
(rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
- !rx->sdata->u.vlan.sta)))
+ !rx->sdata->u.vlan.sta))) {
+ if (!test_and_set_sta_flag(sta, WLAN_STA_4ADDR_EVENT))
+ cfg80211_rx_unexpected_4addr_frame(
+ rx->sdata->dev, sta->sta.addr,
+ GFP_ATOMIC);
return RX_DROP_MONITOR;
+ }
/*
* Update counter and free packet here to avoid
* counting this as a dropped packed.
static ieee80211_rx_result
ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
{
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr *fwd_hdr, *hdr;
+ struct ieee80211_tx_info *info;
struct ieee80211s_hdr *mesh_hdr;
- unsigned int hdrlen;
struct sk_buff *skb = rx->skb, *fwd_skb;
struct ieee80211_local *local = rx->local;
struct ieee80211_sub_if_data *sdata = rx->sdata;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ __le16 reason = cpu_to_le16(WLAN_REASON_MESH_PATH_NOFORWARD);
+ u16 q, hdrlen;
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
return RX_CONTINUE;
if (!mesh_hdr->ttl)
- /* illegal frame */
- return RX_DROP_MONITOR;
-
- if (ieee80211_queue_stopped(&local->hw, skb_get_queue_mapping(skb))) {
- IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
- dropped_frames_congestion);
return RX_DROP_MONITOR;
- }
if (mesh_hdr->flags & MESH_FLAGS_AE) {
struct mesh_path *mppath;
compare_ether_addr(sdata->vif.addr, hdr->addr3) == 0)
return RX_CONTINUE;
- mesh_hdr->ttl--;
+ q = ieee80211_select_queue_80211(local, skb, hdr);
+ if (ieee80211_queue_stopped(&local->hw, q)) {
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion);
+ return RX_DROP_MONITOR;
+ }
+ skb_set_queue_mapping(skb, q);
- if (status->rx_flags & IEEE80211_RX_RA_MATCH) {
- if (!mesh_hdr->ttl)
- IEEE80211_IFSTA_MESH_CTR_INC(&rx->sdata->u.mesh,
- dropped_frames_ttl);
- else {
- struct ieee80211_hdr *fwd_hdr;
- struct ieee80211_tx_info *info;
-
- fwd_skb = skb_copy(skb, GFP_ATOMIC);
-
- if (!fwd_skb && net_ratelimit())
- printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
- sdata->name);
- if (!fwd_skb)
- goto out;
-
- fwd_hdr = (struct ieee80211_hdr *) fwd_skb->data;
- memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
- info = IEEE80211_SKB_CB(fwd_skb);
- memset(info, 0, sizeof(*info));
- info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
- info->control.vif = &rx->sdata->vif;
- if (is_multicast_ether_addr(fwd_hdr->addr1)) {
- IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
- fwded_mcast);
- skb_set_queue_mapping(fwd_skb,
- ieee80211_select_queue(sdata, fwd_skb));
- ieee80211_set_qos_hdr(sdata, fwd_skb);
- } else {
- int err;
- /*
- * Save TA to addr1 to send TA a path error if a
- * suitable next hop is not found
- */
- memcpy(fwd_hdr->addr1, fwd_hdr->addr2,
- ETH_ALEN);
- err = mesh_nexthop_lookup(fwd_skb, sdata);
- /* Failed to immediately resolve next hop:
- * fwded frame was dropped or will be added
- * later to the pending skb queue. */
- if (err)
- return RX_DROP_MONITOR;
-
- IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
- fwded_unicast);
- }
- IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
- fwded_frames);
- ieee80211_add_pending_skb(local, fwd_skb);
- }
+ if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
+ goto out;
+
+ if (!--mesh_hdr->ttl) {
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
+ return RX_DROP_MONITOR;
+ }
+
+ fwd_skb = skb_copy(skb, GFP_ATOMIC);
+ if (!fwd_skb) {
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
+ sdata->name);
+ goto out;
}
+ fwd_hdr = (struct ieee80211_hdr *) fwd_skb->data;
+ info = IEEE80211_SKB_CB(fwd_skb);
+ memset(info, 0, sizeof(*info));
+ info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
+ info->control.vif = &rx->sdata->vif;
+ info->control.jiffies = jiffies;
+ if (is_multicast_ether_addr(fwd_hdr->addr1)) {
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_mcast);
+ memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
+ } else if (!mesh_nexthop_lookup(fwd_skb, sdata)) {
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast);
+ } else {
+ /* unable to resolve next hop */
+ mesh_path_error_tx(ifmsh->mshcfg.element_ttl, fwd_hdr->addr3,
+ 0, reason, fwd_hdr->addr2, sdata);
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_no_route);
+ return RX_DROP_MONITOR;
+ }
+
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_frames);
+ ieee80211_add_pending_skb(local, fwd_skb);
out:
if (is_multicast_ether_addr(hdr->addr1) ||
sdata->dev->flags & IFF_PROMISC)
return RX_DROP_MONITOR;
/*
- * Allow the cooked monitor interface of an AP to see 4-addr frames so
- * that a 4-addr station can be detected and moved into a separate VLAN
+ * Send unexpected-4addr-frame event to hostapd. For older versions,
+ * also drop the frame to cooked monitor interfaces.
*/
if (ieee80211_has_a4(hdr->frame_control) &&
- sdata->vif.type == NL80211_IFTYPE_AP)
+ sdata->vif.type == NL80211_IFTYPE_AP) {
+ if (rx->sta &&
+ !test_and_set_sta_flag(rx->sta, WLAN_STA_4ADDR_EVENT))
+ cfg80211_rx_unexpected_4addr_frame(
+ rx->sdata->dev, rx->sta->sta.addr, GFP_ATOMIC);
return RX_DROP_MONITOR;
+ }
err = __ieee80211_data_to_8023(rx, &port_control);
if (unlikely(err))
if (!ieee80211_is_mgmt(mgmt->frame_control))
return RX_DROP_MONITOR;
+ if (rx->sdata->vif.type == NL80211_IFTYPE_AP &&
+ ieee80211_is_beacon(mgmt->frame_control) &&
+ !(rx->flags & IEEE80211_RX_BEACON_REPORTED)) {
+ struct ieee80211_rx_status *status;
+
+ status = IEEE80211_SKB_RXCB(rx->skb);
+ cfg80211_report_obss_beacon(rx->local->hw.wiphy,
+ rx->skb->data, rx->skb->len,
+ status->freq, GFP_ATOMIC);
+ rx->flags |= IEEE80211_RX_BEACON_REPORTED;
+ }
+
if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
return RX_DROP_MONITOR;
switch (mgmt->u.action.category) {
case WLAN_CATEGORY_BACK:
- /*
- * The aggregation code is not prepared to handle
- * anything but STA/AP due to the BSSID handling;
- * IBSS could work in the code but isn't supported
- * by drivers or the standard.
- */
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- sdata->vif.type != NL80211_IFTYPE_AP)
+ sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
break;
/* verify action_code is present */
return 0;
} else if (!ieee80211_bssid_match(bssid,
sdata->vif.addr)) {
+ /*
+ * Accept public action frames even when the
+ * BSSID doesn't match, this is used for P2P
+ * and location updates. Note that mac80211
+ * itself never looks at these frames.
+ */
+ if (!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
+ ieee80211_is_public_action(hdr, skb->len))
+ return 1;
if (!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
- !ieee80211_is_beacon(hdr->frame_control) &&
- !(ieee80211_is_action(hdr->frame_control) &&
- sdata->vif.p2p))
+ !ieee80211_is_beacon(hdr->frame_control))
return 0;
status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
}
git.openpandora.org / pandora-kernel.git / blobdiff