#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
#define IEEE80211_ASSOC_MAX_TRIES 3
#define IEEE80211_MONITORING_INTERVAL (2 * HZ)
-#define IEEE80211_PROBE_INTERVAL (60 * HZ)
+#define IEEE80211_PROBE_IDLE_TIME (60 * HZ)
#define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
/* utils */
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
bss->cbss.capability, bss->has_erp_value, bss->erp_value);
+ cfg80211_hold_bss(&bss->cbss);
+
ieee80211_rx_bss_put(local, bss);
}
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
+ struct ieee80211_conf *conf = &local_to_hw(local)->conf;
+ struct ieee80211_bss *bss;
struct sta_info *sta;
u32 changed = 0, config_changed = 0;
ieee80211_sta_tear_down_BA_sessions(sta);
+ bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
+ conf->channel->center_freq,
+ ifmgd->ssid, ifmgd->ssid_len);
+
+ if (bss) {
+ cfg80211_unhold_bss(&bss->cbss);
+ ieee80211_rx_bss_put(local, bss);
+ }
+
if (self_disconnected) {
if (deauth)
ieee80211_send_deauth_disassoc(sdata,
mod_timer(&ifmgd->timer, jiffies + IEEE80211_ASSOC_TIMEOUT);
}
+void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_hdr *hdr)
+{
+ /*
+ * We can postpone the mgd.timer whenever receiving unicast frames
+ * from AP because we know that the connection is working both ways
+ * at that time. But multicast frames (and hence also beacons) must
+ * be ignored here, because we need to trigger the timer during
+ * data idle periods for sending the periodical probe request to
+ * the AP.
+ */
+ if (!is_multicast_ether_addr(hdr->addr1))
+ mod_timer(&sdata->u.mgd.timer,
+ jiffies + IEEE80211_MONITORING_INTERVAL);
+}
+
+void ieee80211_beacon_loss_work(struct work_struct *work)
+{
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ u.mgd.beacon_loss_work);
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
+ "- sending probe request\n", sdata->dev->name,
+ sdata->u.mgd.bssid);
+ }
+#endif
+
+ ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+ ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
+ ifmgd->ssid_len, NULL, 0);
+
+ mod_timer(&ifmgd->timer, jiffies + IEEE80211_MONITORING_INTERVAL);
+}
+
+void ieee80211_beacon_loss(struct ieee80211_vif *vif)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ queue_work(sdata->local->hw.workqueue,
+ &sdata->u.mgd.beacon_loss_work);
+}
+EXPORT_SYMBOL(ieee80211_beacon_loss);
static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- int disassoc;
+ bool disassoc = false;
/* TODO: start monitoring current AP signal quality and number of
* missed beacons. Scan other channels every now and then and search
if (!sta) {
printk(KERN_DEBUG "%s: No STA entry for own AP %pM\n",
sdata->dev->name, ifmgd->bssid);
- disassoc = 1;
- } else {
- disassoc = 0;
- if (time_after(jiffies,
- sta->last_rx + IEEE80211_MONITORING_INTERVAL)) {
- if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
- printk(KERN_DEBUG "%s: No ProbeResp from "
- "current AP %pM - assume out of "
- "range\n",
- sdata->dev->name, ifmgd->bssid);
- disassoc = 1;
- } else
- ieee80211_send_probe_req(sdata, ifmgd->bssid,
- ifmgd->ssid,
- ifmgd->ssid_len,
- NULL, 0);
- ifmgd->flags ^= IEEE80211_STA_PROBEREQ_POLL;
- } else {
- ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
- if (time_after(jiffies, ifmgd->last_probe +
- IEEE80211_PROBE_INTERVAL)) {
- ifmgd->last_probe = jiffies;
- ieee80211_send_probe_req(sdata, ifmgd->bssid,
- ifmgd->ssid,
- ifmgd->ssid_len,
- NULL, 0);
- }
+ disassoc = true;
+ goto unlock;
+ }
+
+ if ((ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) &&
+ time_after(jiffies, sta->last_rx + IEEE80211_MONITORING_INTERVAL)) {
+ printk(KERN_DEBUG "%s: no probe response from AP %pM "
+ "- disassociating\n",
+ sdata->dev->name, ifmgd->bssid);
+ disassoc = true;
+ ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+ goto unlock;
+ }
+
+ /*
+ * Beacon filtering is only enabled with power save and then the
+ * stack should not check for beacon loss.
+ */
+ if (!((local->hw.flags & IEEE80211_HW_BEACON_FILTER) &&
+ (local->hw.conf.flags & IEEE80211_CONF_PS)) &&
+ time_after(jiffies,
+ ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: beacon loss from AP %pM "
+ "- sending probe request\n",
+ sdata->dev->name, ifmgd->bssid);
}
+#endif
+ ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+ ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
+ ifmgd->ssid_len, NULL, 0);
+ goto unlock;
+
}
+ if (time_after(jiffies, sta->last_rx + IEEE80211_PROBE_IDLE_TIME)) {
+ ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+ ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
+ ifmgd->ssid_len, NULL, 0);
+ }
+
+ unlock:
rcu_read_unlock();
if (disassoc)
bss_conf->assoc_capability = capab_info;
ieee80211_set_associated(sdata, changed);
+ /*
+ * initialise the time of last beacon to be the association time,
+ * otherwise beacon loss check will trigger immediately
+ */
+ ifmgd->last_beacon = jiffies;
+
ieee80211_associated(sdata);
cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, len);
}
size_t len,
struct ieee80211_rx_status *rx_status)
{
+ struct ieee80211_if_managed *ifmgd;
size_t baselen;
struct ieee802_11_elems elems;
+ ifmgd = &sdata->u.mgd;
+
if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN))
return; /* ignore ProbeResp to foreign address */
/* direct probe may be part of the association flow */
if (test_and_clear_bit(IEEE80211_STA_REQ_DIRECT_PROBE,
- &sdata->u.mgd.request)) {
+ &ifmgd->request)) {
printk(KERN_DEBUG "%s direct probe responded\n",
sdata->dev->name);
ieee80211_authenticate(sdata);
}
+
+ if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL)
+ ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
}
static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
ifmgd = &sdata->u.mgd;
INIT_WORK(&ifmgd->work, ieee80211_sta_work);
INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
+ INIT_WORK(&ifmgd->beacon_loss_work, ieee80211_beacon_loss_work);
setup_timer(&ifmgd->timer, ieee80211_sta_timer,
(unsigned long) sdata);
setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
struct ieee80211_local *local =
container_of(work, struct ieee80211_local,
dynamic_ps_enable_work);
+ /* XXX: using scan_sdata is completely broken! */
struct ieee80211_sub_if_data *sdata = local->scan_sdata;
if (local->hw.conf.flags & IEEE80211_CONF_PS)
return;
- if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+ if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata)
ieee80211_send_nullfunc(local, sdata, 1);
local->hw.conf.flags |= IEEE80211_CONF_PS;