* the off-channel channel when a remain-on-channel offload is done
* in hardware -- normal packets still flow and are expected to be
* handled properly by the device.
+ * @IEEE80211_TX_INTFL_TKIP_MIC_FAILURE: Marks this packet to be used for TKIP
+ * testing. It will be sent out with incorrect Michael MIC key to allow
+ * TKIP countermeasures to be tested.
*
* Note: If you have to add new flags to the enumeration, then don't
* forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
IEEE80211_TX_CTL_LDPC = BIT(22),
IEEE80211_TX_CTL_STBC = BIT(23) | BIT(24),
IEEE80211_TX_CTL_TX_OFFCHAN = BIT(25),
+ IEEE80211_TX_INTFL_TKIP_MIC_FAILURE = BIT(26),
};
#define IEEE80211_TX_CTL_STBC_SHIFT 23
* the frame.
* @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
* the frame.
- * @RX_FLAG_TSFT: The timestamp passed in the RX status (@mactime field)
- * is valid. This is useful in monitor mode and necessary for beacon frames
- * to enable IBSS merging.
+ * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime
+ * field) is valid and contains the time the first symbol of the MPDU
+ * was received. This is useful in monitor mode and for proper IBSS
+ * merging.
* @RX_FLAG_SHORTPRE: Short preamble was used for this frame
* @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
* @RX_FLAG_40MHZ: HT40 (40 MHz) was used
RX_FLAG_IV_STRIPPED = 1<<4,
RX_FLAG_FAILED_FCS_CRC = 1<<5,
RX_FLAG_FAILED_PLCP_CRC = 1<<6,
- RX_FLAG_TSFT = 1<<7,
+ RX_FLAG_MACTIME_MPDU = 1<<7,
RX_FLAG_SHORTPRE = 1<<8,
RX_FLAG_HT = 1<<9,
RX_FLAG_40MHZ = 1<<10,
* to decrypt group addressed frames, then IBSS RSN support is still
* possible but software crypto will be used. Advertise the wiphy flag
* only in that case.
+ *
+ * @IEEE80211_HW_AP_LINK_PS: When operating in AP mode the device
+ * autonomously manages the PS status of connected stations. When
+ * this flag is set mac80211 will not trigger PS mode for connected
+ * stations based on the PM bit of incoming frames.
+ * Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure
+ * the PS mode of connected stations.
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20,
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
+ IEEE80211_HW_AP_LINK_PS = 1<<22,
};
/**
* @napi_weight: weight used for NAPI polling. You must specify an
* appropriate value here if a napi_poll operation is provided
* by your driver.
+
+ * @max_rx_aggregation_subframes: maximum buffer size (number of
+ * sub-frames) to be used for A-MPDU block ack receiver
+ * aggregation.
+ * This is only relevant if the device has restrictions on the
+ * number of subframes, if it relies on mac80211 to do reordering
+ * it shouldn't be set.
+ *
+ * @max_tx_aggregation_subframes: maximum number of subframes in an
+ * aggregate an HT driver will transmit, used by the peer as a
+ * hint to size its reorder buffer.
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
u8 max_rates;
u8 max_report_rates;
u8 max_rate_tries;
+ u8 max_rx_aggregation_subframes;
+ u8 max_tx_aggregation_subframes;
};
/**
* station, AP, IBSS/WDS/mesh peer etc. This callback can sleep.
*
* @sta_notify: Notifies low level driver about power state transition of an
- * associated station, AP, IBSS/WDS/mesh peer etc. Must be atomic.
+ * associated station, AP, IBSS/WDS/mesh peer etc. For a VIF operating
+ * in AP mode, this callback will not be called when the flag
+ * %IEEE80211_HW_AP_LINK_PS is set. Must be atomic.
*
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue.
* ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
* is the first frame we expect to perform the action on. Notice
* that TX/RX_STOP can pass NULL for this parameter.
+ * The @buf_size parameter is only valid when the action is set to
+ * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder
+ * buffer size (number of subframes) for this session -- aggregates
+ * containing more subframes than this may not be transmitted to the peer.
* Returns a negative error code on failure.
* The callback can sleep.
*
* ieee80211_remain_on_channel_expired(). This callback may sleep.
* @cancel_remain_on_channel: Requests that an ongoing off-channel period is
* aborted before it expires. This callback may sleep.
+ * @offchannel_tx: Transmit frame on another channel, wait for a response
+ * and return. Reliable TX status must be reported for the frame. If the
+ * return value is 1, then the @remain_on_channel will be used with a
+ * regular transmission (if supported.)
+ * @offchannel_tx_cancel_wait: cancel wait associated with offchannel TX
*/
struct ieee80211_ops {
- int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
+ void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
int (*add_interface)(struct ieee80211_hw *hw,
int (*ampdu_action)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ u8 buf_size);
int (*get_survey)(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
void (*rfkill_poll)(struct ieee80211_hw *hw);
enum nl80211_channel_type channel_type,
int duration);
int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
+ int (*offchannel_tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int wait);
+ int (*offchannel_tx_cancel_wait)(struct ieee80211_hw *hw);
};
/**
local_bh_enable();
}
+/**
+ * ieee80211_sta_ps_transition - PS transition for connected sta
+ *
+ * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS
+ * flag set, use this function to inform mac80211 about a connected station
+ * entering/leaving PS mode.
+ *
+ * This function may not be called in IRQ context or with softirqs enabled.
+ *
+ * Calls to this function for a single hardware must be synchronized against
+ * each other.
+ *
+ * The function returns -EINVAL when the requested PS mode is already set.
+ *
+ * @sta: currently connected sta
+ * @start: start or stop PS
+ */
+int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
+
+/**
+ * ieee80211_sta_ps_transition_ni - PS transition for connected sta
+ * (in process context)
+ *
+ * Like ieee80211_sta_ps_transition() but can be called in process context
+ * (internally disables bottom halves). Concurrent call restriction still
+ * applies.
+ *
+ * @sta: currently connected sta
+ * @start: start or stop PS
+ */
+static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
+ bool start)
+{
+ int ret;
+
+ local_bh_disable();
+ ret = ieee80211_sta_ps_transition(sta, start);
+ local_bh_enable();
+
+ return ret;
+}
+
/*
* The TX headroom reserved by mac80211 for its own tx_status functions.
* This is enough for the radiotap header.
git.openpandora.org / pandora-kernel.git / blobdiff