* Channel flags set by the regulatory control code.
*
* @IEEE80211_CHAN_DISABLED: This channel is disabled.
- * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
- * on this channel.
- * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes
+ * sending probe requests or beaconing.
* @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
* @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
* is not permitted.
*/
enum ieee80211_channel_flags {
IEEE80211_CHAN_DISABLED = 1<<0,
- IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
- IEEE80211_CHAN_NO_IBSS = 1<<2,
+ IEEE80211_CHAN_NO_IR = 1<<1,
+ /* hole at 1<<2 */
IEEE80211_CHAN_RADAR = 1<<3,
IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
const struct cfg80211_chan_def *chandef,
u32 prohibited_flags);
+/**
+ * cfg80211_chandef_dfs_required - checks if radar detection is required
+ * @wiphy: the wiphy to validate against
+ * @chandef: the channel definition to check
+ * Return: 1 if radar detection is required, 0 if it is not, < 0 on error
+ */
+int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
+ const struct cfg80211_chan_def *chandef);
+
/**
* ieee80211_chandef_rate_flags - returns rate flags for a channel
*
* @capability: station capability
* @ext_capab: extended capabilities of the station
* @ext_capab_len: number of extended capabilities
+ * @supported_channels: supported channels in IEEE 802.11 format
+ * @supported_channels_len: number of supported channels
+ * @supported_oper_classes: supported oper classes in IEEE 802.11 format
+ * @supported_oper_classes_len: number of supported operating classes
*/
struct station_parameters {
const u8 *supported_rates;
u16 capability;
const u8 *ext_capab;
u8 ext_capab_len;
+ const u8 *supported_channels;
+ u8 supported_channels_len;
+ const u8 *supported_oper_classes;
+ u8 supported_oper_classes_len;
};
/**
* sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
* required to assume that the port is unauthorized until authorized by
* user space. Otherwise, port is marked authorized by default.
+ * @userspace_handles_dfs: whether user space controls DFS operation, i.e.
+ * changes the channel when a radar is detected. This is required
+ * to operate on DFS channels.
* @basic_rates: bitmap of basic rates to use when creating the IBSS
* @mcast_rate: per-band multicast rate index + 1 (0: disabled)
* @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask
bool channel_fixed;
bool privacy;
bool control_port;
+ bool userspace_handles_dfs;
int mcast_rate[IEEE80211_NUM_BANDS];
struct ieee80211_ht_cap ht_capa;
struct ieee80211_ht_cap ht_capa_mask;
size_t ie_len;
};
+/**
+ * struct cfg80211_mgmt_tx_params - mgmt tx parameters
+ *
+ * This structure provides information needed to transmit a mgmt frame
+ *
+ * @chan: channel to use
+ * @offchan: indicates wether off channel operation is required
+ * @wait: duration for ROC
+ * @buf: buffer to transmit
+ * @len: buffer length
+ * @no_cck: don't use cck rates for this frame
+ * @dont_wait_for_ack: tells the low level not to wait for an ack
+ */
+struct cfg80211_mgmt_tx_params {
+ struct ieee80211_channel *chan;
+ bool offchan;
+ unsigned int wait;
+ const u8 *buf;
+ size_t len;
+ bool no_cck;
+ bool dont_wait_for_ack;
+};
+
/**
* struct cfg80211_ops - backend description for wireless configuration
*
u64 cookie);
int (*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev,
- struct ieee80211_channel *chan, bool offchan,
- unsigned int wait, const u8 *buf, size_t len,
- bool no_cck, bool dont_wait_for_ack, u64 *cookie);
+ struct cfg80211_mgmt_tx_params *params,
+ u64 *cookie);
int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
struct wireless_dev *wdev,
u64 cookie);
/**
* enum wiphy_flags - wiphy capability flags
*
- * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
- * has its own custom regulatory domain and cannot identify the
- * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
- * we will disregard the first regulatory hint (when the
- * initiator is %REGDOM_SET_BY_CORE).
- * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
- * ignore regulatory domain settings until it gets its own regulatory
- * domain via its regulatory_hint() unless the regulatory hint is
- * from a country IE. After its gets its own regulatory domain it will
- * only allow further regulatory domain settings to further enhance
- * compliance. For example if channel 13 and 14 are disabled by this
- * regulatory domain no user regulatory domain can enable these channels
- * at a later time. This can be used for devices which do not have
- * calibration information guaranteed for frequencies or settings
- * outside of its regulatory domain. If used in combination with
- * WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings
- * will be followed.
- * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
- * that passive scan flags and beaconing flags may not be lifted by
- * cfg80211 due to regulatory beacon hints. For more information on beacon
- * hints read the documenation for regulatory_hint_found_beacon()
* @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
* wiphy at all
* @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
* beaconing mode (AP, IBSS, Mesh, ...).
*/
enum wiphy_flags {
- WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
- WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
- WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
+ /* use hole at 0 */
+ /* use hole at 1 */
+ /* use hole at 2 */
WIPHY_FLAG_NETNS_OK = BIT(3),
WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
WIPHY_FLAG_4ADDR_AP = BIT(5),
* @software_iftypes: bitmask of software interface types, these are not
* subject to any restrictions since they are purely managed in SW.
* @flags: wiphy flags, see &enum wiphy_flags
+ * @regulatory_flags: wiphy regulatory flags, see
+ * &enum ieee80211_regulatory_flags
* @features: features advertised to nl80211, see &enum nl80211_feature_flags.
* @bss_priv_size: each BSS struct has private data allocated with it,
* this variable determines its size
u16 max_acl_mac_addrs;
- u32 flags, features;
+ u32 flags, regulatory_flags, features;
u32 ap_sme_capa;
* @conn: (private) cfg80211 software SME connection state machine data
* @connect_keys: (private) keys to set after connection is established
* @ibss_fixed: (private) IBSS is using fixed BSSID
+ * @ibss_dfs_possible: (private) IBSS may change to a DFS channel
* @event_list: (private) list for internal event processing
* @event_lock: (private) lock for event list
*/
struct ieee80211_channel *channel;
bool ibss_fixed;
+ bool ibss_dfs_possible;
bool ps;
int ps_timeout;
* custom regulatory domain will be trusted completely and as such previous
* default channel settings will be disregarded. If no rule is found for a
* channel on the regulatory domain the channel will be disabled.
+ * Drivers using this for a wiphy should also set the wiphy flag
+ * WIPHY_FLAG_CUSTOM_REGULATORY or cfg80211 will set it for the wiphy
+ * that called this helper.
*/
void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
const struct ieee80211_regdomain *regd);
const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
u32 center_freq);
+/**
+ * reg_initiator_name - map regulatory request initiator enum to name
+ * @initiator: the regulatory request initiator
+ *
+ * You can use this to map the regulatory request initiator enum to a
+ * proper string representation.
+ */
+const char *reg_initiator_name(enum nl80211_reg_initiator initiator);
+
/*
* callbacks for asynchronous cfg80211 methods, notification
* functions and BSS handling helpers
/**
* cfg80211_cac_event - Channel availability check (CAC) event
* @netdev: network device
+ * @chandef: chandef for the current channel
* @event: type of event
* @gfp: context flags
*
* also by full-MAC drivers.
*/
void cfg80211_cac_event(struct net_device *netdev,
+ const struct cfg80211_chan_def *chandef,
enum nl80211_radar_event event, gfp_t gfp);
* @dev: the device which switched channels
* @chandef: the new channel definition
*
- * Acquires wdev_lock, so must only be called from sleepable driver context!
+ * Caller must acquire wdev_lock, therefore must only be called from sleepable
+ * driver context!
*/
void cfg80211_ch_switch_notify(struct net_device *dev,
struct cfg80211_chan_def *chandef);