#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/prefetch.h>
+#include <linux/lockdep.h>
#include <asm/page.h>
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) (!((unsigned long)(addr) & \
- (current_thread_info()->addr_limit.seg)))
-
-/*
- * Uhhuh, this needs 65-bit arithmetic. We have a carry..
- */
-#define __range_not_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("# range_ok\n\r" \
- "addq %3,%1 ; sbbq %0,%0 ; cmpq %1,%4 ; sbbq $0,%0" \
- : "=&r" (flag), "=r" (roksum) \
- : "1" (addr), "g" ((long)(size)), \
- "g" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-#define access_ok(type, addr, size) (__range_not_ok(addr, size) == 0)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#define ARCH_HAS_SEARCH_EXTABLE
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- : "=a" (ret),"=d" (x) \
- : "0" (ptr)) \
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-#define get_user(x, ptr) \
-({ \
- unsigned long __val_gu; \
- int __ret_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- case 8: \
- __get_user_x(8, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_bad(); \
- break; \
- } \
- (x) = (__force typeof(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-extern void __put_user_bad(void);
-
-#define __put_user_x(size, ret, x, ptr) \
- asm volatile("call __put_user_" #size \
- :"=a" (ret) \
- :"c" (ptr),"d" (x) \
- :"r8")
-
-#define put_user(x, ptr) \
- __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- int __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err); \
- __pu_err; \
-})
-
-
-#define __put_user_check(x, ptr, size) \
-({ \
- int __pu_err; \
- typeof(*(ptr)) __user *__pu_addr = (ptr); \
- switch (size) { \
- case 1: \
- __put_user_x(1, __pu_err, x, __pu_addr); \
- break; \
- case 2: \
- __put_user_x(2, __pu_err, x, __pu_addr); \
- break; \
- case 4: \
- __put_user_x(4, __pu_err, x, __pu_addr); \
- break; \
- case 8: \
- __put_user_x(8, __pu_err, x, __pu_addr); \
- break; \
- default: \
- __put_user_bad(); \
- } \
- __pu_err; \
-})
-
-#define __put_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", -EFAULT);\
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", -EFAULT);\
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "k", "ir", -EFAULT);\
- break; \
- case 8: \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-/* FIXME: this hack is definitely wrong -AK */
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errno), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- int __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err); \
- (x) = (__force typeof(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern int __get_user_1(void);
-extern int __get_user_2(void);
-extern int __get_user_4(void);
-extern int __get_user_8(void);
-extern int __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", -EFAULT);\
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", -EFAULT);\
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "k", "=r", -EFAULT);\
- break; \
- case 8: \
- __get_user_asm(x, ptr, retval, "q", "", "=r", -EFAULT); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i"(errno), "0"(err))
-
/*
* Copy To/From Userspace
*/
return copy_user_generic((__force void *)dst, src, size);
}
-#define ARCH_HAS_NOCACHE_UACCESS 1
extern long __copy_user_nocache(void *dst, const void __user *src,
unsigned size, int zerorest);
return __copy_user_nocache(dst, src, size, 0);
}
+unsigned long
+copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest);
+
#endif /* __X86_64_UACCESS_H */
git.openpandora.org / pandora-kernel.git / blobdiff