* Partition info commands
*
* These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The lenght is always 2. First byte is the subcommand code
+ * the SMU. The length is always 2. First byte is the subcommand code
* and second byte is the partition ID.
*
* The reply is 6 bytes:
* Power supply control
*
* The "sub" command is an ASCII string in the data, the
- * data lenght is that of the string.
+ * data length is that of the string.
*
* The VSLEW command can be used to get or set the voltage slewing.
- * - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
* reply at data offset 6, 7 and 8.
- * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
* used to set the voltage slewing point. The SMU replies with "DONE"
* I yet have to figure out their exact meaning of those 3 bytes in
* both cases. They seem to be:
*/
#define SMU_CMD_READ_ADC 0xd8
+
/* Misc commands
*
* This command seem to be a grab bag of various things
+ *
+ * Parameters:
+ * 1: subcommand
*/
#define SMU_CMD_MISC_df_COMMAND 0xdf
-#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 /* i: 1 byte */
+
+/*
+ * Sets "system ready" status
+ *
+ * I did not yet understand how it exactly works or what it does.
+ *
+ * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
+ * the same codebase for all OF versions. On PowerBooks, this command would
+ * enable the backlight. For the G5s, it only activates the front LED. However,
+ * don't take this for granted.
+ *
+ * Parameters:
+ * 2: status [0x00, 0x01 or 0x02]
+ */
+#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02
+
+/*
+ * Sets mode of power switch.
+ *
+ * What this actually does is not yet known. Maybe it enables some interrupt.
+ *
+ * Parameters:
+ * 2: enable power switch? [0x00 or 0x01]
+ * 3 (optional): enable nmi? [0x00 or 0x01]
+ *
+ * Returns:
+ * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
+ * NMI is enabled. Otherwise unknown.
+ */
#define SMU_CMD_MISC_df_NMI_OPTION 0x04
+/* Sets LED dimm offset.
+ *
+ * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
+ * frequency) depends on current time. Therefore, the SMU needs to know the
+ * timezone.
+ *
+ * Parameters:
+ * 2-8: unknown (BCD coding)
+ */
+#define SMU_CMD_MISC_df_DIMM_OFFSET 0x99
+
+
/*
* Version info commands
*
- * I haven't quite tried to figure out how these work
+ * Parameters:
+ * 1 (optional): Specifies version part to retrieve
+ *
+ * Returns:
+ * Version value
*/
#define SMU_CMD_VERSION_COMMAND 0xea
+#define SMU_VERSION_RUNNING 0x00
+#define SMU_VERSION_BASE 0x01
+#define SMU_VERSION_UPDATE 0x02
+
+
+/*
+ * Switches
+ *
+ * These are switches whose status seems to be known to the SMU.
+ *
+ * Parameters:
+ * none
+ *
+ * Result:
+ * Switch bits (ORed, see below)
+ */
+#define SMU_CMD_SWITCHES 0xdc
+
+/* Switches bits */
+#define SMU_SWITCH_CASE_CLOSED 0x01
+#define SMU_SWITCH_AC_POWER 0x04
+#define SMU_SWITCH_POWER_SWITCH 0x08
/*
*/
#define SMU_CMD_MISC_ee_COMMAND 0xee
#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02
-#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */
+
+/* Retrieves currently used watts.
+ *
+ * Parameters:
+ * 1: 0x03 (Meaning unknown)
+ */
+#define SMU_CMD_MISC_ee_GET_WATTS 0x03
+
+#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */
#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */
+/*
+ * Power related commands
+ *
+ * Parameters:
+ * 1: subcommand
+ */
+#define SMU_CMD_POWER_EVENTS_COMMAND 0x8f
+
+/* SMU_POWER_EVENTS subcommands */
+enum {
+ SMU_PWR_GET_POWERUP_EVENTS = 0x00,
+ SMU_PWR_SET_POWERUP_EVENTS = 0x01,
+ SMU_PWR_CLR_POWERUP_EVENTS = 0x02,
+ SMU_PWR_GET_WAKEUP_EVENTS = 0x03,
+ SMU_PWR_SET_WAKEUP_EVENTS = 0x04,
+ SMU_PWR_CLR_WAKEUP_EVENTS = 0x05,
+
+ /*
+ * Get last shutdown cause
+ *
+ * Returns:
+ * 1 byte (signed char): Last shutdown cause. Exact meaning unknown.
+ */
+ SMU_PWR_LAST_SHUTDOWN_CAUSE = 0x07,
+
+ /*
+ * Sets or gets server ID. Meaning or use is unknown.
+ *
+ * Parameters:
+ * 2 (optional): Set server ID (1 byte)
+ *
+ * Returns:
+ * 1 byte (server ID?)
+ */
+ SMU_PWR_SERVER_ID = 0x08,
+};
+
+/* Power events wakeup bits */
+enum {
+ SMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */
+ SMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */
+ SMU_PWR_WAKEUP_AC_CHANGE = 0x04,
+ SMU_PWR_WAKEUP_LID_OPEN = 0x08,
+ SMU_PWR_WAKEUP_RING = 0x10,
+};
+
/*
* - Kernel side interface -
* This returns the pointer to an SMU "sdb" partition data or NULL
* if not found. The data format is described below
*/
-extern struct smu_sdbp_header *smu_get_sdb_partition(int id,
+extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
unsigned int *size);
/* Get "sdb" partition data from an SMU satellite */
__u8 cmd; /* SMU command byte */
__u8 pad[3]; /* padding */
- __u32 data_len; /* Lenght of data following */
+ __u32 data_len; /* Length of data following */
};
struct smu_user_reply_hdr
{
__u32 status; /* Command status */
- __u32 reply_len; /* Lenght of data follwing */
+ __u32 reply_len; /* Length of data follwing */
};
#endif /* _SMU_H */
git.openpandora.org / pandora-kernel.git / blobdiff