#ifndef _ASM_IO_H
#define _ASM_IO_H
-#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/types.h>
* hardware. An example use would be for flash memory that's used for
* execute in place.
*/
-# define __raw_ioswabb(x) (x)
-# define __raw_ioswabw(x) (x)
-# define __raw_ioswabl(x) (x)
-# define __raw_ioswabq(x) (x)
-# define ____raw_ioswabq(x) (x)
+# define __raw_ioswabb(a,x) (x)
+# define __raw_ioswabw(a,x) (x)
+# define __raw_ioswabl(a,x) (x)
+# define __raw_ioswabq(a,x) (x)
+# define ____raw_ioswabq(a,x) (x)
-/*
- * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
- * less sane hardware forces software to fiddle with this...
- *
- * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
- * you can't have the numerical value of data and byte addresses within
- * multibyte quantities both preserved at the same time. Hence two
- * variations of functions: non-prefixed ones that preserve the value
- * and prefixed ones that preserve byte addresses. The latters are
- * typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "__mem_" prefix.
- */
-#if defined(CONFIG_SWAP_IO_SPACE)
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# ifdef CONFIG_SGI_IP22
-/*
- * IP22 seems braindead enough to swap 16bits values in hardware, but
- * not 32bits. Go figure... Can't tell without documentation.
- */
-# define ioswabw(x) (x)
-# define __mem_ioswabw(x) le16_to_cpu(x)
-# else
-# define ioswabw(x) le16_to_cpu(x)
-# define __mem_ioswabw(x) (x)
-# endif
-# define ioswabl(x) le32_to_cpu(x)
-# define __mem_ioswabl(x) (x)
-# define ioswabq(x) le64_to_cpu(x)
-# define __mem_ioswabq(x) (x)
-
-#else
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# define ioswabw(x) (x)
-# define __mem_ioswabw(x) cpu_to_le16(x)
-# define ioswabl(x) (x)
-# define __mem_ioswabl(x) cpu_to_le32(x)
-# define ioswabq(x) (x)
-# define __mem_ioswabq(x) cpu_to_le32(x)
-
-#endif
+/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
#define IO_SPACE_LIMIT 0xffff
\
__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
\
- __val = pfx##ioswab##bwlq(val); \
+ __val = pfx##ioswab##bwlq(__mem, val); \
\
if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
*__mem = __val; \
BUG(); \
} \
\
- return pfx##ioswab##bwlq(__val); \
+ return pfx##ioswab##bwlq(__mem, __val); \
}
#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
volatile type *__addr; \
type __val; \
\
- port = __swizzle_addr_##bwlq(port); \
- __addr = (void *)(mips_io_port_base + port); \
+ __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
\
- __val = pfx##ioswab##bwlq(val); \
+ __val = pfx##ioswab##bwlq(__addr, val); \
\
/* Really, we want this to be atomic */ \
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
volatile type *__addr; \
type __val; \
\
- port = __swizzle_addr_##bwlq(port); \
- __addr = (void *)(mips_io_port_base + port); \
+ __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
\
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
\
__val = *__addr; \
slow; \
\
- return pfx##ioswab##bwlq(__val); \
+ return pfx##ioswab##bwlq(__addr, __val); \
}
#define __BUILD_MEMORY_PFX(bus, bwlq, type) \
*/
#define __ISA_IO_base ((char *)(isa_slot_offset))
-#define isa_readb(a) readb(__ISA_IO_base + (a))
-#define isa_readw(a) readw(__ISA_IO_base + (a))
-#define isa_readl(a) readl(__ISA_IO_base + (a))
-#define isa_readq(a) readq(__ISA_IO_base + (a))
-#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a))
-#define isa_writew(w,a) writew(w,__ISA_IO_base + (a))
-#define isa_writel(l,a) writel(l,__ISA_IO_base + (a))
-#define isa_writeq(q,a) writeq(q,__ISA_IO_base + (a))
-#define isa_memset_io(a,b,c) memset_io(__ISA_IO_base + (a),(b),(c))
-#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c))
-#define isa_memcpy_toio(a,b,c) memcpy_toio(__ISA_IO_base + (a),(b),(c))
-
/*
* We don't have csum_partial_copy_fromio() yet, so we cheat here and
* just copy it. The net code will then do the checksum later.
*/
#define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len))
-#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(b),(c),(d))
-
-/*
- * check_signature - find BIOS signatures
- * @io_addr: mmio address to check
- * @signature: signature block
- * @length: length of signature
- *
- * Perform a signature comparison with the mmio address io_addr. This
- * address should have been obtained by ioremap.
- * Returns 1 on a match.
- */
-static inline int check_signature(char __iomem *io_addr,
- const unsigned char *signature, int length)
-{
- int retval = 0;
- do {
- if (readb(io_addr) != *signature)
- goto out;
- io_addr++;
- signature++;
- length--;
- } while (length);
- retval = 1;
-out:
- return retval;
-}
/*
* The caches on some architectures aren't dma-coherent and have need to
git.openpandora.org / pandora-kernel.git / blobdiff