GFS2: Support for I/O barriers

[pandora-kernel.git] / include / asm-blackfin / mach-bf537 / blackfin.h

diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h
index 53fcfa3..cffc786 100644 (file)
--- a/include/asm-blackfin/mach-bf537/blackfin.h
+++ b/include/asm-blackfin/mach-bf537/blackfin.h
@@ -82,8 +82,6 @@
 #define STATUS_P1      0x02
 #define STATUS_P0      0x01
 
-/* UART 0*/
-
 /* DMA Channnel */
 #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
 #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
@@ -106,37 +104,52 @@
 /* MMR Registers*/
 #define bfin_read_UART_THR() bfin_read_UART0_THR()
 #define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define UART_THR UART0_THR
+#define BFIN_UART_THR UART0_THR
 #define bfin_read_UART_RBR() bfin_read_UART0_RBR()
 #define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define UART_RBR UART0_RBR
+#define BFIN_UART_RBR UART0_RBR
 #define bfin_read_UART_DLL() bfin_read_UART0_DLL()
 #define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define UART_DLL UART0_DLL
+#define BFIN_UART_DLL UART0_DLL
 #define bfin_read_UART_IER() bfin_read_UART0_IER()
 #define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define UART_IER UART0_IER
+#define BFIN_UART_IER UART0_IER
 #define bfin_read_UART_DLH() bfin_read_UART0_DLH()
 #define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define UART_DLH UART0_DLH
+#define BFIN_UART_DLH UART0_DLH
 #define bfin_read_UART_IIR() bfin_read_UART0_IIR()
 #define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define UART_IIR UART0_IIR
+#define BFIN_UART_IIR UART0_IIR
 #define bfin_read_UART_LCR() bfin_read_UART0_LCR()
 #define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define UART_LCR UART0_LCR
+#define BFIN_UART_LCR UART0_LCR
 #define bfin_read_UART_MCR() bfin_read_UART0_MCR()
 #define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define UART_MCR UART0_MCR
+#define BFIN_UART_MCR UART0_MCR
 #define bfin_read_UART_LSR() bfin_read_UART0_LSR()
 #define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define UART_LSR UART0_LSR
+#define BFIN_UART_LSR UART0_LSR
 #define bfin_read_UART_SCR() bfin_read_UART0_SCR()
 #define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define UART_SCR  UART0_SCR
+#define BFIN_UART_SCR  UART0_SCR
 #define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
 #define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-#define UART_GCTL UART0_GCTL
+#define BFIN_UART_GCTL UART0_GCTL
+
+#define BFIN_UART_NR_PORTS     2
+
+#define OFFSET_THR              0x00   /* Transmit Holding register            */
+#define OFFSET_RBR              0x00   /* Receive Buffer register              */
+#define OFFSET_DLL              0x00   /* Divisor Latch (Low-Byte)             */
+#define OFFSET_IER              0x04   /* Interrupt Enable Register            */
+#define OFFSET_DLH              0x04   /* Divisor Latch (High-Byte)            */
+#define OFFSET_IIR              0x08   /* Interrupt Identification Register    */
+#define OFFSET_LCR              0x0C   /* Line Control Register                */
+#define OFFSET_MCR              0x10   /* Modem Control Register               */
+#define OFFSET_LSR              0x14   /* Line Status Register                 */
+#define OFFSET_MSR              0x18   /* Modem Status Register                */
+#define OFFSET_SCR              0x1C   /* SCR Scratch Register                 */
+#define OFFSET_GCTL             0x24   /* Global Control Register              */
 
 /* DPMC*/
 #define bfin_read_STOPCK_OFF() bfin_read_STOPCK()