#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_ENRINTR (1 << 9) /* The end of Receive */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#endif
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IECC (1 << 31) /* IntEn - Configuration Change */
-#define UDCISR1_IESOF (1 << 30) /* IntEn - Start of Frame */
-#define UDCISR1_IERU (1 << 29) /* IntEn - Resume */
-#define UDCISR1_IESU (1 << 28) /* IntEn - Suspend */
-#define UDCISR1_IERS (1 << 27) /* IntEn - Reset */
-
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) ((x) - 1) /* Time slots per frame [1..8] */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
#define SSCR0_ADC (1 << 30) /* Audio clock select */
#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
#endif
#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
#define CICR1_TBIT (1 << 31) /* Transparency bit */
#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */
-#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */
+#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
#define CICR1_RGB_F (1 << 11) /* RGB format */
#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
wait count mask */
-#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */
+#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
#define CISR_EOL (1 << 8) /* End of line */
#define CISR_PAR_ERR (1 << 7) /* Parity error */
#define CISR_CQD (1 << 6) /* Camera interface quick disable */
-#define CISR_SOF (1 << 5) /* Start of frame */
-#define CISR_CDD (1 << 4) /* Camera interface disable done */
+#define CISR_CDD (1 << 5) /* Camera interface disable done */
+#define CISR_SOF (1 << 4) /* Start of frame */
#define CISR_EOF (1 << 3) /* End of frame */
#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
git.openpandora.org / pandora-kernel.git / blobdiff