If you are not using a security module that requires using
extended attributes for file security labels, say N.
+config EXT4DEV_FS
+ tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select JBD2
+ help
+ Ext4dev is a predecessor filesystem of the next generation
+ extended fs ext4, based on ext3 filesystem code. It will be
+ renamed ext4 fs later, once ext4dev is mature and stabilized.
+
+ Unlike the change from ext2 filesystem to ext3 filesystem,
+ the on-disk format of ext4dev is not the same as ext3 any more:
+ it is based on extent maps and it supports 48-bit physical block
+ numbers. These combined on-disk format changes will allow
+ ext4dev/ext4 to handle more than 16 TB filesystem volumes --
+ a hard limit that ext3 cannot overcome without changing the
+ on-disk format.
+
+ Other than extent maps and 48-bit block numbers, ext4dev also is
+ likely to have other new features such as persistent preallocation,
+ high resolution time stamps, and larger file support etc. These
+ features will be added to ext4dev gradually.
+
+ To compile this file system support as a module, choose M here. The
+ module will be called ext4dev. Be aware, however, that the filesystem
+ of your root partition (the one containing the directory /) cannot
+ be compiled as a module, and so this could be dangerous.
+
+ If unsure, say N.
+
+config EXT4DEV_FS_XATTR
+ bool "Ext4dev extended attributes"
+ depends on EXT4DEV_FS
+ default y
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+ You need this for POSIX ACL support on ext4dev/ext4.
+
+config EXT4DEV_FS_POSIX_ACL
+ bool "Ext4dev POSIX Access Control Lists"
+ depends on EXT4DEV_FS_XATTR
+ select FS_POSIX_ACL
+ help
+ POSIX Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the POSIX ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config EXT4DEV_FS_SECURITY
+ bool "Ext4dev Security Labels"
+ depends on EXT4DEV_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ext4dev/ext4 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
config JBD
tristate
help
generated. To turn debugging off again, do
"echo 0 > /proc/sys/fs/jbd-debug".
+config JBD2
+ tristate
+ help
+ This is a generic journaling layer for block devices that support
+ both 32-bit and 64-bit block numbers. It is currently used by
+ the ext4dev/ext4 filesystem, but it could also be used to add
+ journal support to other file systems or block devices such
+ as RAID or LVM.
+
+ If you are using ext4dev/ext4, you need to say Y here. If you are not
+ using ext4dev/ext4 then you will probably want to say N.
+
+ To compile this device as a module, choose M here. The module will be
+ called jbd2. If you are compiling ext4dev/ext4 into the kernel,
+ you cannot compile this code as a module.
+
+config JBD2_DEBUG
+ bool "JBD2 (ext4dev/ext4) debugging support"
+ depends on JBD2
+ help
+ If you are using the ext4dev/ext4 journaled file system (or
+ potentially any other filesystem/device using JBD2), this option
+ allows you to enable debugging output while the system is running,
+ in order to help track down any problems you are having.
+ By default, the debugging output will be turned off.
+
+ If you select Y here, then you will be able to turn on debugging
+ with "echo N > /proc/sys/fs/jbd2-debug", where N is a number between
+ 1 and 5. The higher the number, the more debugging output is
+ generated. To turn debugging off again, do
+ "echo 0 > /proc/sys/fs/jbd2-debug".
+
config FS_MBCACHE
-# Meta block cache for Extended Attributes (ext2/ext3)
+# Meta block cache for Extended Attributes (ext2/ext3/ext4)
tristate
- depends on EXT2_FS_XATTR || EXT3_FS_XATTR
- default y if EXT2_FS=y || EXT3_FS=y
- default m if EXT2_FS=m || EXT3_FS=m
+ depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
+ default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
+ default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
config REISERFS_FS
tristate "Reiserfs support"
default n
source "fs/xfs/Kconfig"
+source "fs/gfs2/Kconfig"
config OCFS2_FS
tristate "OCFS2 file system support"
If you want to develop a userspace FS, or if you want to use
a filesystem based on FUSE, answer Y or M.
+config GENERIC_ACL
+ bool
+ select FS_POSIX_ACL
+
if BLOCK
menu "CD-ROM/DVD Filesystems"
To compile this file system support as a module, choose M here: the
module will be called affs. If unsure, say N.
+config ECRYPT_FS
+ tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && KEYS && CRYPTO
+ help
+ Encrypted filesystem that operates on the VFS layer. See
+ <file:Documentation/ecryptfs.txt> to learn more about
+ eCryptfs. Userspace components are required and can be
+ obtained from <http://ecryptfs.sf.net>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ecryptfs.
+
config HFS_FS
tristate "Apple Macintosh file system support (EXPERIMENTAL)"
depends on BLOCK && EXPERIMENTAL
If you have floppies or hard disk partitions like that, it is likely
that they contain binaries from those other Unix systems; in order
- to run these binaries, you will want to install linux-abi which is a
+ to run these binaries, you will want to install linux-abi which is
a set of kernel modules that lets you run SCO, Xenix, Wyse,
UnixWare, Dell Unix and System V programs under Linux. It is
available via FTP (user: ftp) from
select CRYPTO
select CRYPTO_MD5
select CRYPTO_DES
+ select CRYPTO_CBC
help
Provides for secure RPC calls by means of a gss-api
mechanism based on Kerberos V5. This is required for
select CRYPTO_MD5
select CRYPTO_DES
select CRYPTO_CAST5
+ select CRYPTO_CBC
help
Provides for secure RPC calls by means of a gss-api
mechanism based on the SPKM3 public-key mechanism.
config CIFS_UPCALL
bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
depends on CIFS_EXPERIMENTAL
- select CONNECTOR
+ depends on CONNECTOR
help
Enables an upcall mechanism for CIFS which will be used to contact
userspace helper utilities to provide SPNEGO packaged Kerberos
If unsure, say N.
-config GENERIC_ACL
- bool
- select FS_POSIX_ACL
-
endmenu
if BLOCK
endif
source "fs/nls/Kconfig"
+source "fs/dlm/Kconfig"
endmenu
git.openpandora.org / pandora-kernel.git / blobdiff