* Copyright (C) 2002 James Simmons <jsimmons@users.sf.net>
*
* Credits:
- *
+ *
* The EDID Parser is a conglomeration from the following sources:
*
* 1. SciTech SNAP Graphics Architecture
*
* 2. XFree86 4.3.0, interpret_edid.c
* Copyright 1998 by Egbert Eich <Egbert.Eich@Physik.TU-Darmstadt.DE>
- *
- * 3. John Fremlin <vii@users.sourceforge.net> and
+ *
+ * 3. John Fremlin <vii@users.sourceforge.net> and
* Ani Joshi <ajoshi@unixbox.com>
- *
+ *
* Generalized Timing Formula is derived from:
*
- * GTF Spreadsheet by Andy Morrish (1/5/97)
+ * GTF Spreadsheet by Andy Morrish (1/5/97)
* available at http://www.vesa.org
*
* This file is subject to the terms and conditions of the GNU General Public
#endif
#include "edid.h"
-/*
+/*
* EDID parser
*/
#define DPRINTK(fmt, args...)
#endif
-#define FBMON_FIX_HEADER 1
-#define FBMON_FIX_INPUT 2
+#define FBMON_FIX_HEADER 1
+#define FBMON_FIX_INPUT 2
+#define FBMON_FIX_TIMINGS 3
#ifdef CONFIG_FB_MODE_HELPERS
struct broken_edid {
.model = 0x5a44,
.fix = FBMON_FIX_INPUT,
},
+ /* Sharp UXGA? */
+ {
+ .manufacturer = "SHP",
+ .model = 0x138e,
+ .fix = FBMON_FIX_TIMINGS,
+ },
};
static const unsigned char edid_v1_header[] = { 0x00, 0xff, 0xff, 0xff,
while (i-- && (*--s == 0x20)) *s = 0;
}
+static int edid_is_serial_block(unsigned char *block)
+{
+ if ((block[0] == 0x00) && (block[1] == 0x00) &&
+ (block[2] == 0x00) && (block[3] == 0xff) &&
+ (block[4] == 0x00))
+ return 1;
+ else
+ return 0;
+}
+
+static int edid_is_ascii_block(unsigned char *block)
+{
+ if ((block[0] == 0x00) && (block[1] == 0x00) &&
+ (block[2] == 0x00) && (block[3] == 0xfe) &&
+ (block[4] == 0x00))
+ return 1;
+ else
+ return 0;
+}
+
+static int edid_is_limits_block(unsigned char *block)
+{
+ if ((block[0] == 0x00) && (block[1] == 0x00) &&
+ (block[2] == 0x00) && (block[3] == 0xfd) &&
+ (block[4] == 0x00))
+ return 1;
+ else
+ return 0;
+}
+
+static int edid_is_monitor_block(unsigned char *block)
+{
+ if ((block[0] == 0x00) && (block[1] == 0x00) &&
+ (block[2] == 0x00) && (block[3] == 0xfc) &&
+ (block[4] == 0x00))
+ return 1;
+ else
+ return 0;
+}
+
+static int edid_is_timing_block(unsigned char *block)
+{
+ if ((block[0] != 0x00) || (block[1] != 0x00) ||
+ (block[2] != 0x00) || (block[4] != 0x00))
+ return 1;
+ else
+ return 0;
+}
+
static int check_edid(unsigned char *edid)
{
unsigned char *block = edid + ID_MANUFACTURER_NAME, manufacturer[4];
for (i = 0; i < ARRAY_SIZE(brokendb); i++) {
if (!strncmp(manufacturer, brokendb[i].manufacturer, 4) &&
brokendb[i].model == model) {
- printk("fbmon: The EDID Block of "
- "Manufacturer: %s Model: 0x%x is known to "
- "be broken,\n", manufacturer, model);
- fix = brokendb[i].fix;
- break;
+ fix = brokendb[i].fix;
+ break;
}
}
switch (fix) {
case FBMON_FIX_HEADER:
for (i = 0; i < 8; i++) {
- if (edid[i] != edid_v1_header[i])
+ if (edid[i] != edid_v1_header[i]) {
ret = fix;
+ break;
+ }
}
break;
case FBMON_FIX_INPUT:
if (b[4] & 0x01 && b[0] & 0x80)
ret = fix;
break;
+ case FBMON_FIX_TIMINGS:
+ b = edid + DETAILED_TIMING_DESCRIPTIONS_START;
+ ret = fix;
+
+ for (i = 0; i < 4; i++) {
+ if (edid_is_limits_block(b)) {
+ ret = 0;
+ break;
+ }
+
+ b += DETAILED_TIMING_DESCRIPTION_SIZE;
+ }
+
+ break;
}
+ if (ret)
+ printk("fbmon: The EDID Block of "
+ "Manufacturer: %s Model: 0x%x is known to "
+ "be broken,\n", manufacturer, model);
+
return ret;
}
static void fix_edid(unsigned char *edid, int fix)
{
- unsigned char *b;
+ int i;
+ unsigned char *b, csum = 0;
switch (fix) {
case FBMON_FIX_HEADER:
b = edid + EDID_STRUCT_DISPLAY;
b[0] &= ~0x80;
edid[127] += 0x80;
+ break;
+ case FBMON_FIX_TIMINGS:
+ printk("fbmon: trying to fix monitor timings\n");
+ b = edid + DETAILED_TIMING_DESCRIPTIONS_START;
+ for (i = 0; i < 4; i++) {
+ if (!(edid_is_serial_block(b) ||
+ edid_is_ascii_block(b) ||
+ edid_is_monitor_block(b) ||
+ edid_is_timing_block(b))) {
+ b[0] = 0x00;
+ b[1] = 0x00;
+ b[2] = 0x00;
+ b[3] = 0xfd;
+ b[4] = 0x00;
+ b[5] = 60; /* vfmin */
+ b[6] = 60; /* vfmax */
+ b[7] = 30; /* hfmin */
+ b[8] = 75; /* hfmax */
+ b[9] = 17; /* pixclock - 170 MHz*/
+ b[10] = 0; /* GTF */
+ break;
+ }
+
+ b += DETAILED_TIMING_DESCRIPTION_SIZE;
+ }
+
+ for (i = 0; i < EDID_LENGTH - 1; i++)
+ csum += edid[i];
+
+ edid[127] = 256 - csum;
+ break;
}
}
(flags & DPMS_SUSPEND) ? "yes" : "no",
(flags & DPMS_STANDBY) ? "yes" : "no");
}
-
+
static void get_chroma(unsigned char *block, struct fb_monspecs *specs)
{
int tmp;
tmp += 512;
specs->chroma.bluey = tmp/1024;
DPRINTK("BlueY: 0.%03d\n", specs->chroma.bluey);
-
+
tmp = ((block[6] & (3 << 2)) >> 2) | (block[0xd] << 2);
tmp *= 1000;
tmp += 512;
DPRINTK("WhiteY: 0.%03d\n", specs->chroma.whitey);
}
-static int edid_is_serial_block(unsigned char *block)
-{
- if ((block[0] == 0x00) && (block[1] == 0x00) &&
- (block[2] == 0x00) && (block[3] == 0xff) &&
- (block[4] == 0x00))
- return 1;
- else
- return 0;
-}
-
-static int edid_is_ascii_block(unsigned char *block)
-{
- if ((block[0] == 0x00) && (block[1] == 0x00) &&
- (block[2] == 0x00) && (block[3] == 0xfe) &&
- (block[4] == 0x00))
- return 1;
- else
- return 0;
-}
-
-static int edid_is_limits_block(unsigned char *block)
-{
- if ((block[0] == 0x00) && (block[1] == 0x00) &&
- (block[2] == 0x00) && (block[3] == 0xfd) &&
- (block[4] == 0x00))
- return 1;
- else
- return 0;
-}
-
-static int edid_is_monitor_block(unsigned char *block)
-{
- if ((block[0] == 0x00) && (block[1] == 0x00) &&
- (block[2] == 0x00) && (block[3] == 0xfc) &&
- (block[4] == 0x00))
- return 1;
- else
- return 0;
-}
-
static void calc_mode_timings(int xres, int yres, int refresh,
struct fb_videomode *mode)
{
struct fb_var_screeninfo *var;
-
+
var = kzalloc(sizeof(struct fb_var_screeninfo), GFP_KERNEL);
if (var) {
c = block[1];
if (c&0x80) {
- mode[num++] = vesa_modes[9];
+ mode[num++] = vesa_modes[9];
DPRINTK(" 800x600@72Hz\n");
}
if (c&0x40) {
- mode[num++] = vesa_modes[10];
+ mode[num++] = vesa_modes[10];
DPRINTK(" 800x600@75Hz\n");
}
if (c&0x20) {
static int get_std_timing(unsigned char *block, struct fb_videomode *mode)
{
int xres, yres = 0, refresh, ratio, i;
-
+
xres = (block[0] + 31) * 8;
if (xres <= 256)
return 0;
DPRINTK(" %dx%d@%dHz\n", xres, yres, refresh);
for (i = 0; i < VESA_MODEDB_SIZE; i++) {
- if (vesa_modes[i].xres == xres &&
+ if (vesa_modes[i].xres == xres &&
vesa_modes[i].yres == yres &&
vesa_modes[i].refresh == refresh) {
*mode = vesa_modes[i];
{
int j, num = 0;
- for (j = 0; j < 6; j++, block+= STD_TIMING_DESCRIPTION_SIZE)
+ for (j = 0; j < 6; j++, block += STD_TIMING_DESCRIPTION_SIZE)
num += get_std_timing(block, &mode[num]);
return num;
}
-static void get_detailed_timing(unsigned char *block,
+static void get_detailed_timing(unsigned char *block,
struct fb_videomode *mode)
{
mode->xres = H_ACTIVE;
mode->right_margin = H_SYNC_OFFSET;
mode->left_margin = (H_ACTIVE + H_BLANKING) -
(H_ACTIVE + H_SYNC_OFFSET + H_SYNC_WIDTH);
- mode->upper_margin = V_BLANKING - V_SYNC_OFFSET -
+ mode->upper_margin = V_BLANKING - V_SYNC_OFFSET -
V_SYNC_WIDTH;
mode->lower_margin = V_SYNC_OFFSET;
mode->hsync_len = H_SYNC_WIDTH;
{
struct fb_videomode *mode, *m;
unsigned char *block;
- int num = 0, i;
+ int num = 0, i, first = 1;
mode = kzalloc(50 * sizeof(struct fb_videomode), GFP_KERNEL);
if (mode == NULL)
return NULL;
- if (edid == NULL || !edid_checksum(edid) ||
+ if (edid == NULL || !edid_checksum(edid) ||
!edid_check_header(edid)) {
kfree(mode);
return NULL;
DPRINTK(" Detailed Timings\n");
block = edid + DETAILED_TIMING_DESCRIPTIONS_START;
for (i = 0; i < 4; i++, block+= DETAILED_TIMING_DESCRIPTION_SIZE) {
- int first = 1;
-
if (!(block[0] == 0x00 && block[1] == 0x00)) {
get_detailed_timing(block, &mode[num]);
if (first) {
if (block[0] == 0x00 && block[1] == 0x00 && block[3] == 0xfa)
num += get_dst_timing(block + 5, &mode[num]);
}
-
+
/* Yikes, EDID data is totally useless */
if (!num) {
kfree(mode);
/* estimate monitor limits based on modes supported */
if (retval) {
struct fb_videomode *modes, *mode;
- int num_modes, i, hz, hscan, pixclock;
+ int num_modes, hz, hscan, pixclock;
int vtotal, htotal;
modes = fb_create_modedb(edid, &num_modes);
hscan = (pixclock + htotal / 2) / htotal;
hscan = (hscan + 500) / 1000 * 1000;
hz = (hscan + vtotal / 2) / vtotal;
-
+
if (specs->dclkmax == 0 || specs->dclkmax < pixclock)
specs->dclkmax = pixclock;
}
}
-static int edid_is_timing_block(unsigned char *block)
-{
- if ((block[0] != 0x00) || (block[1] != 0x00) ||
- (block[2] != 0x00) || (block[4] != 0x00))
- return 1;
- else
- return 0;
-}
-
int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
{
int i;
if (edid_is_timing_block(block)) {
var->xres = var->xres_virtual = H_ACTIVE;
var->yres = var->yres_virtual = V_ACTIVE;
- var->height = var->width = -1;
+ var->height = var->width = 0;
var->right_margin = H_SYNC_OFFSET;
var->left_margin = (H_ACTIVE + H_BLANKING) -
(H_ACTIVE + H_SYNC_OFFSET + H_SYNC_WIDTH);
DPRINTK("========================================\n");
}
-/*
- * VESA Generalized Timing Formula (GTF)
+/*
+ * VESA Generalized Timing Formula (GTF)
*/
#define FLYBACK 550
* @hfreq: horizontal freq
*
* DESCRIPTION:
- * vblank = right_margin + vsync_len + left_margin
+ * vblank = right_margin + vsync_len + left_margin
*
* given: right_margin = 1 (V_FRONTPORCH)
* vsync_len = 3
{
u32 vblank;
- vblank = (hfreq * FLYBACK)/1000;
+ vblank = (hfreq * FLYBACK)/1000;
vblank = (vblank + 500)/1000;
return (vblank + V_FRONTPORCH);
}
-/**
+/**
* fb_get_hblank_by_freq - get horizontal blank time given hfreq
* @hfreq: horizontal freq
* @xres: horizontal resolution in pixels
*
* where: C = ((offset - scale factor) * blank_scale)
* -------------------------------------- + scale factor
- * 256
+ * 256
* M = blank_scale * gradient
*
*/
{
u32 c_val, m_val, duty_cycle, hblank;
- c_val = (((H_OFFSET - H_SCALEFACTOR) * H_BLANKSCALE)/256 +
+ c_val = (((H_OFFSET - H_SCALEFACTOR) * H_BLANKSCALE)/256 +
H_SCALEFACTOR) * 1000;
m_val = (H_BLANKSCALE * H_GRADIENT)/256;
m_val = (m_val * 1000000)/hfreq;
return (hblank);
}
-/**
+/**
* fb_get_hblank_by_dclk - get horizontal blank time given pixelclock
* @dclk: pixelclock in Hz
* @xres: horizontal resolution in pixels
*
* duty cycle = percent of htotal assigned to inactive display
* duty cycle = C - (M * h_period)
- *
+ *
* where: h_period = SQRT(100 - C + (0.4 * xres * M)/dclk) + C - 100
* -----------------------------------------------
* 2 * M
h_period = 100 - C_VAL;
h_period *= h_period;
h_period += (M_VAL * xres * 2 * 1000)/(5 * dclk);
- h_period *=10000;
+ h_period *= 10000;
h_period = int_sqrt(h_period);
h_period -= (100 - C_VAL) * 100;
- h_period *= 1000;
+ h_period *= 1000;
h_period /= 2 * M_VAL;
duty_cycle = C_VAL * 1000 - (M_VAL * h_period)/100;
hblank &= ~15;
return (hblank);
}
-
+
/**
* fb_get_hfreq - estimate hsync
* @vfreq: vertical refresh rate
* (yres + front_port) * vfreq * 1000000
* hfreq = -------------------------------------
* (1000000 - (vfreq * FLYBACK)
- *
+ *
*/
static u32 fb_get_hfreq(u32 vfreq, u32 yres)
{
u32 divisor, hfreq;
-
+
divisor = (1000000 - (vfreq * FLYBACK))/1000;
hfreq = (yres + V_FRONTPORCH) * vfreq * 1000;
return (hfreq/divisor);
timings->hfreq = fb_get_hfreq(timings->vfreq, timings->vactive);
timings->vblank = fb_get_vblank(timings->hfreq);
timings->vtotal = timings->vactive + timings->vblank;
- timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
+ timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
timings->hactive);
timings->htotal = timings->hactive + timings->hblank;
timings->dclk = timings->htotal * timings->hfreq;
timings->vblank = fb_get_vblank(timings->hfreq);
timings->vtotal = timings->vactive + timings->vblank;
timings->vfreq = timings->hfreq/timings->vtotal;
- timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
+ timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
timings->hactive);
timings->htotal = timings->hactive + timings->hblank;
timings->dclk = timings->htotal * timings->hfreq;
static void fb_timings_dclk(struct __fb_timings *timings)
{
- timings->hblank = fb_get_hblank_by_dclk(timings->dclk,
+ timings->hblank = fb_get_hblank_by_dclk(timings->dclk,
timings->hactive);
timings->htotal = timings->hactive + timings->hblank;
timings->hfreq = timings->dclk/timings->htotal;
* @info: pointer to fb_info
*
* DESCRIPTION:
- * Calculates video mode based on monitor specs using VESA GTF.
- * The GTF is best for VESA GTF compliant monitors but is
+ * Calculates video mode based on monitor specs using VESA GTF.
+ * The GTF is best for VESA GTF compliant monitors but is
* specifically formulated to work for older monitors as well.
*
- * If @flag==0, the function will attempt to maximize the
+ * If @flag==0, the function will attempt to maximize the
* refresh rate. Otherwise, it will calculate timings based on
- * the flag and accompanying value.
+ * the flag and accompanying value.
*
- * If FB_IGNOREMON bit is set in @flags, monitor specs will be
+ * If FB_IGNOREMON bit is set in @flags, monitor specs will be
* ignored and @var will be filled with the calculated timings.
*
* All calculations are based on the VESA GTF Spreadsheet
* available at VESA's public ftp (http://www.vesa.org).
- *
+ *
* NOTES:
* The timings generated by the GTF will be different from VESA
* DMT. It might be a good idea to keep a table of standard
* VESA modes as well. The GTF may also not work for some displays,
* such as, and especially, analog TV.
- *
+ *
* REQUIRES:
* A valid info->monspecs, otherwise 'safe numbers' will be used.
- */
+ */
int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_info *info)
{
struct __fb_timings *timings;
if (!timings)
return -ENOMEM;
- /*
+ /*
* If monspecs are invalid, use values that are enough
* for 640x480@60
*/
timings->hactive = var->xres;
timings->vactive = var->yres;
- if (var->vmode & FB_VMODE_INTERLACED) {
+ if (var->vmode & FB_VMODE_INTERLACED) {
timings->vactive /= 2;
interlace = 2;
}
break;
default:
err = -EINVAL;
-
- }
-
+
+ }
+
if (err || (!(flags & FB_IGNOREMON) &&
(timings->vfreq < vfmin || timings->vfreq > vfmax ||
timings->hfreq < hfmin || timings->hfreq > hfmax ||
var->upper_margin = (timings->vblank * interlace)/dscan -
(var->vsync_len + var->lower_margin);
}
-
+
kfree(timings);
return err;
}
return -EINVAL;
}
#endif /* CONFIG_FB_MODE_HELPERS */
-
+
/*
* fb_validate_mode - validates var against monitor capabilities
* @var: pointer to fb_var_screeninfo
u32 hfreq, vfreq, htotal, vtotal, pixclock;
u32 hfmin, hfmax, vfmin, vfmax, dclkmin, dclkmax;
- /*
+ /*
* If monspecs are invalid, use values that are enough
* for 640x480@60
*/
if (!var->pixclock)
return -EINVAL;
pixclock = PICOS2KHZ(var->pixclock) * 1000;
-
- htotal = var->xres + var->right_margin + var->hsync_len +
+
+ htotal = var->xres + var->right_margin + var->hsync_len +
var->left_margin;
- vtotal = var->yres + var->lower_margin + var->vsync_len +
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
var->upper_margin;
if (var->vmode & FB_VMODE_INTERLACED)
vfreq = hfreq/vtotal;
- return (vfreq < vfmin || vfreq > vfmax ||
+ return (vfreq < vfmin || vfreq > vfmax ||
hfreq < hfmin || hfreq > hfmax ||
pixclock < dclkmin || pixclock > dclkmax) ?
-EINVAL : 0;
git.openpandora.org / pandora-kernel.git / blobdiff