US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Mario Rettig <mariorettig@web.de> */
+UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
+ "Nokia",
+ "Nokia 3250",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
* Einar Th. Einarsson <einarthered@gmail.com> */
UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
"Digital Camera EX-20 DSC",
US_SC_8070, US_PR_DEVICE, NULL, 0 ),
-/* The entry was here before I took over, and had US_SC_RBC. It turns
- * out that isn't needed. Additionally, Torsten Eriksson
- * <Torsten.Eriksson@bergianska.se> is able to use his device fine
- * without this entry at all - but I don't suspect that will be true
- * for all users (the protocol is likely needed), so is staying at
- * this time. - Phil Dibowitz <phil@ipom.com>
- */
-UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
- "LaCie",
- "USB Hard Disk",
- US_SC_DEVICE, US_PR_CB, NULL, 0 ),
-
/* Submitted by Joel Bourquard <numlock@freesurf.ch>
* Some versions of this device need the SubClass and Protocol overrides
* while others don't.
"Optio S/S4",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-
+
+/* This is a virtual windows driver CD, which the zd1211rw driver automatically
+ * converts into a WLAN device. */
+UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+ "ZyXEL",
+ "G-220F USB-WLAN Install",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE ),
+
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+/* David Kuehling <dvdkhlng@gmx.de>:
+ * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
+ * errors when trying to write.
+ */
+UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
+ "C-MEX",
+ "A-VOX",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
*/
-UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x1019, 0x0c55, 0x0110, 0x0110,
"Desknote",
"UCR-61S2B",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,