#include <linux/serial_reg.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
/*
#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
/* This structure holds all of the local port information */
-struct moschip_port
-{
+struct moschip_port {
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
__u8 shadowMSR; /* last MSR value received */
};
/* This structure holds all of the individual serial device information */
-struct moschip_serial
-{
+struct moschip_serial {
int interrupt_started;
};
#define MOSCHIP_DEVICE_ID_7715 0x7715
static struct usb_device_id moschip_port_id_table [] = {
- { USB_DEVICE(USB_VENDOR_ID_MOSCHIP,MOSCHIP_DEVICE_ID_7720) },
+ { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
{ } /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
__u8 sp1;
__u8 sp2;
- dbg("%s"," : Entering\n");
+ dbg("%s", " : Entering\n");
switch (status) {
case 0:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ dbg("%s - urb shutting down with status: %d", __func__,
status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ dbg("%s - nonzero urb status received: %d", __func__,
status);
goto exit;
}
if (result)
dev_err(&urb->dev->dev,
"%s - Error %d submitting control urb\n",
- __FUNCTION__, result);
+ __func__, result);
return;
}
mos7720_port = urb->context;
if (!mos7720_port) {
- dbg("%s","NULL mos7720_port pointer \n");
+ dbg("%s", "NULL mos7720_port pointer \n");
return ;
}
port = mos7720_port->port;
- dbg("Entering...%s", __FUNCTION__);
+ dbg("Entering...%s", __func__);
data = urb->transfer_buffer;
- tty = port->tty;
+ tty = port->port.tty;
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
dbg("Entering .........");
- tty = mos7720_port->port->tty;
+ tty = mos7720_port->port->port.tty;
if (tty && mos7720_port->open)
tty_wakeup(tty);
__u16 size = 0x0000;
if (value < MOS_MAX_PORT) {
- if (product == MOSCHIP_DEVICE_ID_7715) {
+ if (product == MOSCHIP_DEVICE_ID_7715)
value = value*0x100+0x100;
- } else {
+ else
value = value*0x100+0x200;
- }
} else {
value = 0x0000;
if ((product == MOSCHIP_DEVICE_ID_7715) &&
(index != 0x08)) {
dbg("serial->product== MOSCHIP_DEVICE_ID_7715");
- //index = 0x01 ;
+ /* index = 0x01 ; */
}
}
request = (__u8)MOS_READ;
requesttype = (__u8)0xC0;
size = 0x01;
- pipe = usb_rcvctrlpipe(serial->dev,0);
+ pipe = usb_rcvctrlpipe(serial->dev, 0);
}
status = usb_control_msg(serial->dev, pipe, request, requesttype,
value, index, data, size, MOS_WDR_TIMEOUT);
if (status < 0)
- dbg("Command Write failed Value %x index %x\n",value,index);
+ dbg("Command Write failed Value %x index %x\n", value, index);
return status;
}
-static int mos7720_open(struct usb_serial_port *port, struct file * filp)
+static int mos7720_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial;
struct usb_serial_port *port0;
/* Initialising the write urb pool */
for (j = 0; j < NUM_URBS; ++j) {
- urb = usb_alloc_urb(0,GFP_KERNEL);
+ urb = usb_alloc_urb(0, GFP_KERNEL);
mos7720_port->write_urb_pool[j] = urb;
if (urb == NULL) {
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s-out of memory for urb buffers.", __FUNCTION__);
+ err("%s-out of memory for urb buffers.", __func__);
usb_free_urb(mos7720_port->write_urb_pool[j]);
mos7720_port->write_urb_pool[j] = NULL;
continue;
*/
port_number = port->number - port->serial->minor;
send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
- dbg("SS::%p LSR:%x\n",mos7720_port, data);
+ dbg("SS::%p LSR:%x\n", mos7720_port, data);
dbg("Check:Sending Command ..........");
data = 0xCF;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
data = 0x03;
- mos7720_port->shadowLCR = data;
+ mos7720_port->shadowLCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
data = 0x0b;
- mos7720_port->shadowMCR = data;
+ mos7720_port->shadowMCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
data = 0x0b;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
data = 0x03;
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
data = 0x00;
- send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
+ send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT,
+ port_number + 1, &data);
*/
data = 0x00;
send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
data = 0x83;
- mos7720_port->shadowLCR = data;
+ mos7720_port->shadowLCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
data = 0x00;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
data = 0x03;
- mos7720_port->shadowLCR = data;
+ mos7720_port->shadowLCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-//Matrix
-
/* force low_latency on so that our tty_push actually forces *
* the data through,otherwise it is scheduled, and with *
* high data rates (like with OHCI) data can get lost. */
- if (port->tty)
- port->tty->low_latency = 1;
+ if (tty)
+ tty->low_latency = 1;
/* see if we've set up our endpoint info yet *
* (can't set it up in mos7720_startup as the *
/* set up our interrupt urb */
usb_fill_int_urb(port0->interrupt_in_urb, serial->dev,
- usb_rcvintpipe(serial->dev,
- port->interrupt_in_endpointAddress),
- port0->interrupt_in_buffer,
- port0->interrupt_in_urb->transfer_buffer_length,
- mos7720_interrupt_callback, mos7720_port,
- port0->interrupt_in_urb->interval);
+ usb_rcvintpipe(serial->dev,
+ port->interrupt_in_endpointAddress),
+ port0->interrupt_in_buffer,
+ port0->interrupt_in_urb->transfer_buffer_length,
+ mos7720_interrupt_callback, mos7720_port,
+ port0->interrupt_in_urb->interval);
/* start interrupt read for this mos7720 this interrupt *
- * will continue as long as the mos7720 is connected */
+ * will continue as long as the mos7720 is connected */
dbg("Submit URB over !!!");
response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL);
if (response)
dev_err(&port->dev,
"%s - Error %d submitting control urb\n",
- __FUNCTION__, response);
+ __func__, response);
}
/* set up our bulk in urb */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
+ port->bulk_in_endpointAddress),
port->bulk_in_buffer,
port->read_urb->transfer_buffer_length,
mos7720_bulk_in_callback, mos7720_port);
response = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (response)
- dev_err(&port->dev,
- "%s - Error %d submitting read urb\n", __FUNCTION__, response);
+ dev_err(&port->dev, "%s - Error %d submitting read urb\n",
+ __func__, response);
/* initialize our icount structure */
memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));
* system,
* Otherwise we return a negative error number.
*/
-static int mos7720_chars_in_buffer(struct usb_serial_port *port)
+static int mos7720_chars_in_buffer(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
int i;
int chars = 0;
struct moschip_port *mos7720_port;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
- dbg("%s:leaving ...........", __FUNCTION__);
+ dbg("%s:leaving ...........", __func__);
return -ENODEV;
}
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
+ if (mos7720_port->write_urb_pool[i] &&
+ mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
chars += URB_TRANSFER_BUFFER_SIZE;
}
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
-static void mos7720_close(struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial;
struct moschip_port *mos7720_port;
}
/* While closing port, shutdown all bulk read, write *
- * and interrupt read if they exists */
- if (serial->dev) {
- dbg("Shutdown bulk write");
- usb_kill_urb(port->write_urb);
- dbg("Shutdown bulk read");
- usb_kill_urb(port->read_urb);
+ * and interrupt read if they exists, otherwise nop */
+ dbg("Shutdown bulk write");
+ usb_kill_urb(port->write_urb);
+ dbg("Shutdown bulk read");
+ usb_kill_urb(port->read_urb);
+
+ mutex_lock(&serial->disc_mutex);
+ /* these commands must not be issued if the device has
+ * been disconnected */
+ if (!serial->disconnected) {
+ data = 0x00;
+ send_mos_cmd(serial, MOS_WRITE,
+ port->number - port->serial->minor, 0x04, &data);
+
+ data = 0x00;
+ send_mos_cmd(serial, MOS_WRITE,
+ port->number - port->serial->minor, 0x01, &data);
}
-
- data = 0x00;
- send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
- 0x04, &data);
-
- data = 0x00;
- send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
- 0x01, &data);
-
+ mutex_unlock(&serial->disc_mutex);
mos7720_port->open = 0;
- dbg("Leaving %s", __FUNCTION__);
+ dbg("Leaving %s", __func__);
}
-static void mos7720_break(struct usb_serial_port *port, int break_state)
+static void mos7720_break(struct tty_struct *tty, int break_state)
{
- unsigned char data;
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned char data;
struct usb_serial *serial;
struct moschip_port *mos7720_port;
- dbg("Entering %s", __FUNCTION__);
+ dbg("Entering %s", __func__);
serial = port->serial;
* If successful, we return the amount of room that we have for this port
* Otherwise we return a negative error number.
*/
-static int mos7720_write_room(struct usb_serial_port *port)
+static int mos7720_write_room(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7720_port;
int room = 0;
int i;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
- dbg("%s:leaving ...........", __FUNCTION__);
+ dbg("%s:leaving ...........", __func__);
return -ENODEV;
}
+ /* FIXME: Locking */
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
+ if (mos7720_port->write_urb_pool[i] &&
+ mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
room += URB_TRANSFER_BUFFER_SIZE;
}
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
-static int mos7720_write(struct usb_serial_port *port,
- const unsigned char *data, int count)
+static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *data, int count)
{
int status;
int i;
struct urb *urb;
const unsigned char *current_position = data;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
serial = port->serial;
urb = NULL;
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
+ if (mos7720_port->write_urb_pool[i] &&
+ mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
urb = mos7720_port->write_urb_pool[i];
- dbg("URB:%d",i);
+ dbg("URB:%d", i);
break;
}
}
if (urb == NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __FUNCTION__);
+ err("%s no more kernel memory...", __func__);
goto exit;
}
}
- transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);
+ transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
memcpy(urb->transfer_buffer, current_position, transfer_size);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size,
+ usb_serial_debug_data(debug, &port->dev, __func__, transfer_size,
urb->transfer_buffer);
/* fill urb with data and submit */
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev,
- port->bulk_out_endpointAddress),
+ port->bulk_out_endpointAddress),
urb->transfer_buffer, transfer_size,
mos7720_bulk_out_data_callback, mos7720_port);
/* send it down the pipe */
- status = usb_submit_urb(urb,GFP_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __FUNCTION__, status);
+ __func__, status);
bytes_sent = status;
goto exit;
}
return bytes_sent;
}
-static void mos7720_throttle(struct usb_serial_port *port)
+static void mos7720_throttle(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7720_port;
- struct tty_struct *tty;
int status;
- dbg("%s- port %d\n", __FUNCTION__, port->number);
+ dbg("%s- port %d\n", __func__, port->number);
mos7720_port = usb_get_serial_port_data(port);
return;
}
- dbg("%s: Entering ..........", __FUNCTION__);
-
- tty = port->tty;
- if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
- return;
- }
+ dbg("%s: Entering ..........", __func__);
/* if we are implementing XON/XOFF, send the stop character */
if (I_IXOFF(tty)) {
unsigned char stop_char = STOP_CHAR(tty);
- status = mos7720_write(port, &stop_char, 1);
+ status = mos7720_write(tty, port, &stop_char, 1);
if (status <= 0)
return;
}
}
}
-static void mos7720_unthrottle(struct usb_serial_port *port)
+static void mos7720_unthrottle(struct tty_struct *tty)
{
- struct tty_struct *tty;
- int status;
+ struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+ int status;
if (mos7720_port == NULL)
return;
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
- dbg("%s: Entering ..........", __FUNCTION__);
-
- tty = port->tty;
- if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
- return;
- }
+ dbg("%s: Entering ..........", __func__);
/* if we are implementing XON/XOFF, send the start character */
if (I_IXOFF(tty)) {
unsigned char start_char = START_CHAR(tty);
- status = mos7720_write(port, &start_char, 1);
+ status = mos7720_write(tty, port, &start_char, 1);
if (status <= 0)
return;
}
port = mos7720_port->port;
serial = port->serial;
- /***********************************************
- * Init Sequence for higher rates
- ***********************************************/
+ /***********************************************
+ * Init Sequence for higher rates
+ ***********************************************/
dbg("Sending Setting Commands ..........");
port_number = port->number - port->serial->minor;
data = 0x0CF;
send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data);
data = 0x00b;
- mos7720_port->shadowMCR = data;
+ mos7720_port->shadowMCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
data = 0x00b;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
- /***********************************************
- * Set for higher rates *
- ***********************************************/
+ /***********************************************
+ * Set for higher rates *
+ ***********************************************/
data = baud * 0x10;
- send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1,&data);
+ send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
data = 0x003;
send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
data = 0x02b;
- mos7720_port->shadowMCR = data;
+ mos7720_port->shadowMCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
data = 0x02b;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
- /***********************************************
- * Set DLL/DLM
- ***********************************************/
+ /***********************************************
+ * Set DLL/DLM
+ ***********************************************/
data = mos7720_port->shadowLCR | UART_LCR_DLAB;
- mos7720_port->shadowLCR = data;
+ mos7720_port->shadowLCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
data = 0x001; /* DLL */
- send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
+ send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
data = 0x000; /* DLM */
- send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
+ send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
- mos7720_port->shadowLCR = data;
+ mos7720_port->shadowLCR = data;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
return 0;
}
/* baud rate information */
-struct divisor_table_entry
-{
+struct divisor_table_entry {
__u32 baudrate;
__u16 divisor;
};
__u16 round;
- dbg("%s - %d", __FUNCTION__, baudrate);
+ dbg("%s - %d", __func__, baudrate);
for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
if (divisor_table[i].baudrate == baudrate) {
}
}
- /* After trying for all the standard baud rates *
- * Try calculating the divisor for this baud rate */
+ /* After trying for all the standard baud rates *
+ * Try calculating the divisor for this baud rate */
if (baudrate > 75 && baudrate < 230400) {
/* get the divisor */
custom = (__u16)(230400L / baudrate);
custom++;
*divisor = custom;
- dbg("Baud %d = %d",baudrate, custom);
+ dbg("Baud %d = %d", baudrate, custom);
return 0;
}
port = mos7720_port->port;
serial = port->serial;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
number = port->number - port->serial->minor;
- dbg("%s - port = %d, baud = %d", __FUNCTION__, port->number, baudrate);
+ dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate);
- /* Calculate the Divisor */
+ /* Calculate the Divisor */
status = calc_baud_rate_divisor(baudrate, &divisor);
if (status) {
- err("%s - bad baud rate", __FUNCTION__);
+ err("%s - bad baud rate", __func__);
return status;
}
- /* Enable access to divisor latch */
- data = mos7720_port->shadowLCR | UART_LCR_DLAB;
- mos7720_port->shadowLCR = data;
- send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
+ /* Enable access to divisor latch */
+ data = mos7720_port->shadowLCR | UART_LCR_DLAB;
+ mos7720_port->shadowLCR = data;
+ send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
/* Write the divisor */
data = ((unsigned char)(divisor & 0xff));
- send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
+ send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
data = ((unsigned char)((divisor & 0xff00) >> 8));
- send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
+ send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
- /* Disable access to divisor latch */
- data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
- mos7720_port->shadowLCR = data;
- send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
+ /* Disable access to divisor latch */
+ data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+ mos7720_port->shadowLCR = data;
+ send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
return status;
}
* This routine is called to set the UART on the device to match
* the specified new settings.
*/
-static void change_port_settings(struct moschip_port *mos7720_port,
+static void change_port_settings(struct tty_struct *tty,
+ struct moschip_port *mos7720_port,
struct ktermios *old_termios)
{
struct usb_serial_port *port;
struct usb_serial *serial;
- struct tty_struct *tty;
int baud;
unsigned cflag;
unsigned iflag;
serial = port->serial;
port_number = port->number - port->serial->minor;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
- tty = mos7720_port->port->tty;
-
- if ((!tty) || (!tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
lData = UART_LCR_WLEN8;
lStop = 0x00; /* 1 stop bit */
if (cflag & PARENB) {
if (cflag & PARODD) {
lParity = UART_LCR_PARITY;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
lParity = (UART_LCR_EPAR | UART_LCR_PARITY);
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CMSPAR)
/* Change the Stop bit */
if (cflag & CSTOPB) {
lStop = UART_LCR_STOP;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
lStop = 0x00;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
#define LCR_PAR_MASK 0x38 /* Mask for parity field */
/* Update the LCR with the correct value */
- mos7720_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+ mos7720_port->shadowLCR &=
+ ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
mos7720_port->shadowLCR |= (lData | lParity | lStop);
/* Disable Interrupts */
data = 0x00;
- send_mos_cmd(serial,MOS_WRITE,port->number - port->serial->minor, UART_IER, &data);
+ send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
+ UART_IER, &data);
data = 0x00;
- send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
+ send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
data = 0xcf;
- send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
+ send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
/* Send the updated LCR value to the mos7720 */
data = mos7720_port->shadowLCR;
- send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
+ send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
- data = 0x00b;
- mos7720_port->shadowMCR = data;
- send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
- data = 0x00b;
- send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+ data = 0x00b;
+ mos7720_port->shadowMCR = data;
+ send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+ data = 0x00b;
+ send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
/* set up the MCR register and send it to the mos7720 */
mos7720_port->shadowMCR = UART_MCR_OUT2;
if (cflag & CRTSCTS) {
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
-
- /* To set hardware flow control to the specified *
- * serial port, in SP1/2_CONTROL_REG */
+ /* To set hardware flow control to the specified *
+ * serial port, in SP1/2_CONTROL_REG */
if (port->number) {
data = 0x001;
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
return;
}
- dbg("%s - baud rate = %d", __FUNCTION__, baud);
+ dbg("%s - baud rate = %d", __func__, baud);
status = send_cmd_write_baud_rate(mos7720_port, baud);
-
+ /* FIXME: needs to write actual resulting baud back not just
+ blindly do so */
+ if (cflag & CBAUD)
+ tty_encode_baud_rate(tty, baud, baud);
/* Enable Interrupts */
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
* this function is called by the tty driver when it wants to change the
* termios structure.
*/
-static void mos7720_set_termios(struct usb_serial_port *port,
- struct ktermios *old_termios)
+static void mos7720_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
int status;
unsigned int cflag;
struct usb_serial *serial;
struct moschip_port *mos7720_port;
- struct tty_struct *tty;
serial = port->serial;
if (mos7720_port == NULL)
return;
- tty = port->tty;
-
- if (!port->tty || !port->tty->termios) {
- dbg("%s - no tty or termios", __FUNCTION__);
- return;
- }
-
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
- dbg("%s\n","setting termios - ASPIRE");
+ dbg("%s\n", "setting termios - ASPIRE");
cflag = tty->termios->c_cflag;
- if (!cflag) {
- printk("%s %s\n",__FUNCTION__,"cflag is NULL");
- return;
- }
-
- dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - cflag %08x iflag %08x", __func__,
tty->termios->c_cflag,
RELEVANT_IFLAG(tty->termios->c_iflag));
- if (old_termios)
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
- old_termios->c_cflag,
- RELEVANT_IFLAG(old_termios->c_iflag));
+ dbg("%s - old cflag %08x old iflag %08x", __func__,
+ old_termios->c_cflag,
+ RELEVANT_IFLAG(old_termios->c_iflag));
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* change the port settings to the new ones specified */
- change_port_settings(mos7720_port, old_termios);
+ change_port_settings(tty, mos7720_port, old_termios);
- if(!port->read_urb) {
- dbg("%s","URB KILLED !!!!!\n");
+ if (!port->read_urb) {
+ dbg("%s", "URB KILLED !!!!!\n");
return;
}
- if(port->read_urb->status != -EINPROGRESS) {
+ if (port->read_urb->status != -EINPROGRESS) {
port->read_urb->dev = serial->dev;
status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (status)
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
-static int get_lsr_info(struct moschip_port *mos7720_port,
- unsigned int __user *value)
+static int get_lsr_info(struct tty_struct *tty,
+ struct moschip_port *mos7720_port, unsigned int __user *value)
{
int count;
unsigned int result = 0;
- count = mos7720_chars_in_buffer(mos7720_port->port);
+ count = mos7720_chars_in_buffer(tty);
if (count == 0) {
- dbg("%s -- Empty", __FUNCTION__);
+ dbg("%s -- Empty", __func__);
result = TIOCSER_TEMT;
}
unsigned int __user *value)
{
unsigned int result = 0;
- struct tty_struct *tty = mos7720_port->port->tty;
+ struct tty_struct *tty = mos7720_port->port->port.tty;
if (!tty)
return -ENOIOCTLCMD;
result = tty->read_cnt;
- dbg("%s(%d) = %d", __FUNCTION__, mos7720_port->port->number, result);
+ dbg("%s(%d) = %d", __func__, mos7720_port->port->number, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
if (mos7720_port == NULL)
return -1;
- port = (struct usb_serial_port*)mos7720_port->port;
+ port = (struct usb_serial_port *)mos7720_port->port;
mcr = mos7720_port->shadowMCR;
if (copy_from_user(&arg, value, sizeof(int)))
| ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
tmp.port = mos7720_port->port->number;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
+ tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
tmp.baud_base = 9600;
tmp.close_delay = 5*HZ;
tmp.closing_wait = 30*HZ;
return 0;
}
-static int mos7720_ioctl(struct usb_serial_port *port, struct file *file,
+static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7720_port;
struct async_icount cnow;
struct async_icount cprev;
if (mos7720_port == NULL)
return -ENODEV;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
case TIOCINQ:
/* return number of bytes available */
- dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCINQ", __func__, port->number);
return get_number_bytes_avail(mos7720_port,
(unsigned int __user *)arg);
break;
case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
- return get_lsr_info(mos7720_port, (unsigned int __user *)arg);
+ dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
+ return get_lsr_info(tty, mos7720_port,
+ (unsigned int __user *)arg);
return 0;
+ /* FIXME: These should be using the mode methods */
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__,
- port->number);
+ dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET",
+ __func__, port->number);
return set_modem_info(mos7720_port, cmd,
(unsigned int __user *)arg);
case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMGET", __func__, port->number);
return get_modem_info(mos7720_port,
(unsigned int __user *)arg);
case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(mos7720_port,
(struct serial_struct __user *)arg);
- case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
- break;
-
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
cprev = mos7720_port->icount;
while (1) {
if (signal_pending(current))
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
return 0;
}
cprev = cnow;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
- port->number, icount.rx, icount.tx );
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
+ port->number, icount.rx, icount.tx);
if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
int i;
char data;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
if (!serial) {
dbg("Invalid Handler");
/* create our private serial structure */
mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
if (mos7720_serial == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
return -ENOMEM;
}
for (i = 0; i < serial->num_ports; ++i) {
mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7720_port == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
usb_set_serial_data(serial, NULL);
kfree(mos7720_serial);
return -ENOMEM;
/* Initialize all port interrupt end point to port 0 int
* endpoint. Our device has only one interrupt endpoint
* comman to all ports */
- serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress;
+ serial->port[i]->interrupt_in_endpointAddress =
+ serial->port[0]->interrupt_in_endpointAddress;
mos7720_port->port = serial->port[i];
usb_set_serial_port_data(serial->port[i], mos7720_port);
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00,0x01,0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
- send_mos_cmd(serial,MOS_READ,0x00, UART_LSR, &data); // LSR For Port 1
- dbg("LSR:%x",data);
+ /* LSR For Port 1 */
+ send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data);
+ dbg("LSR:%x", data);
- send_mos_cmd(serial,MOS_READ,0x01, UART_LSR, &data); // LSR For Port 2
- dbg("LSR:%x",data);
+ /* LSR For Port 2 */
+ send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data);
+ dbg("LSR:%x", data);
return 0;
}
int i;
/* free private structure allocated for serial port */
- for (i=0; i < serial->num_ports; ++i) {
+ for (i = 0; i < serial->num_ports; ++i) {
kfree(usb_get_serial_port_data(serial->port[i]));
usb_set_serial_port_data(serial->port[i], NULL);
}
.description = "Moschip 2 port adapter",
.usb_driver = &usb_driver,
.id_table = moschip_port_id_table,
- .num_interrupt_in = 1,
- .num_bulk_in = 2,
- .num_bulk_out = 2,
.num_ports = 2,
.open = mos7720_open,
.close = mos7720_close,
{
int retval;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
/* Register with the usb serial */
retval = usb_serial_register(&moschip7720_2port_driver);
module_exit(moschip7720_exit);
/* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
git.openpandora.org / pandora-kernel.git / blobdiff