Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...

[pandora-kernel.git] / drivers / usb / input / usbtouchscreen.c

diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 933cedd..7f3c57d 100644 (file)
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -8,6 +8,7 @@
  *  - PanJit TouchSet
  *  - eTurboTouch
  *  - Gunze AHL61
+ *  - DMC TSC-10/25
  *
  * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -30,6 +31,8 @@
  * - ITM parts are from itmtouch.c
  * - 3M parts are from mtouchusb.c
  * - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ *   driver from Marius Vollmer
  *
  *****************************************************************************/
 
@@ -44,7 +47,7 @@
 #include <linux/usb/input.h>
 
 
-#define DRIVER_VERSION         "v0.4"
+#define DRIVER_VERSION         "v0.5"
 #define DRIVER_AUTHOR          "Daniel Ritz <daniel.ritz@gmx.ch>"
 #define DRIVER_DESC            "USB Touchscreen Driver"
 
@@ -103,6 +106,7 @@ enum {
        DEVTYPE_ITM,
        DEVTYPE_ETURBO,
        DEVTYPE_GUNZE,
+       DEVTYPE_DMC_TSC10,
 };
 
 static struct usb_device_id usbtouch_devices[] = {
@@ -139,6 +143,10 @@ static struct usb_device_id usbtouch_devices[] = {
        {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
 #endif
 
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+       {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
        {}
 };
 
@@ -312,6 +320,80 @@ static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *
 }
 #endif
 
+/*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ *   http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ *   http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT       0x50
+#define TSC10_RATE_30          0x40
+#define TSC10_RATE_50          0x41
+#define TSC10_RATE_80          0x42
+#define TSC10_RATE_100         0x43
+#define TSC10_RATE_130         0x44
+#define TSC10_RATE_150         0x45
+
+/* commands */
+#define TSC10_CMD_RESET                0x55
+#define TSC10_CMD_RATE         0x05
+#define TSC10_CMD_DATA1                0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+       struct usb_device *dev = usbtouch->udev;
+       int ret;
+       unsigned char buf[2];
+
+       /* reset */
+       buf[0] = buf[1] = 0xFF;
+       ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                             TSC10_CMD_RESET,
+                             USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                             0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+       if (ret < 0)
+               return ret;
+       if (buf[0] != 0x06 || buf[1] != 0x00)
+               return -ENODEV;
+
+       /* set coordinate output rate */
+       buf[0] = buf[1] = 0xFF;
+       ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                             TSC10_CMD_RATE,
+                             USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                             TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+       if (ret < 0)
+               return ret;
+       if (buf[0] != 0x06 || buf[1] != 0x00)
+               return -ENODEV;
+
+       /* start sending data */
+       ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                             TSC10_CMD_DATA1,
+                             USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                             0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
+
+static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+       *x = ((pkt[2] & 0x03) << 8) | pkt[1];
+       *y = ((pkt[4] & 0x03) << 8) | pkt[3];
+       *touch = pkt[0] & 0x01;
+
+       return 1;
+}
+#endif
+
+
 /*****************************************************************************
  * the different device descriptors
  */
@@ -389,6 +471,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
                .read_data      = gunze_read_data,
        },
 #endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+       [DEVTYPE_DMC_TSC10] = {
+               .min_xc         = 0x0,
+               .max_xc         = 0x03ff,
+               .min_yc         = 0x0,
+               .max_yc         = 0x03ff,
+               .rept_size      = 5,
+               .init           = dmc_tsc10_init,
+               .read_data      = dmc_tsc10_read_data,
+       },
+#endif
 };
 
 
@@ -586,7 +680,7 @@ static int usbtouch_probe(struct usb_interface *intf,
                type->process_pkt = usbtouch_process_pkt;
 
        usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
-                                         SLAB_KERNEL, &usbtouch->data_dma);
+                                         GFP_KERNEL, &usbtouch->data_dma);
        if (!usbtouch->data)
                goto out_free;