Merge branches 'release', 'asus', 'sony-laptop' and 'thinkpad' into release

[pandora-kernel.git] / drivers / usb / gadget / Kconfig

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 767aed5..c139551 100644 (file)
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -12,10 +12,9 @@
 # With help from a special transceiver and a "Mini-AB" jack, systems with
 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
 #
-menu "USB Gadget Support"
 
-config USB_GADGET
-       tristate "Support for USB Gadgets"
+menuconfig USB_GADGET
+       tristate "USB Gadget Support"
        help
           USB is a master/slave protocol, organized with one master
           host (such as a PC) controlling up to 127 peripheral devices.
@@ -42,6 +41,8 @@ config USB_GADGET
           For more information, see <http://www.linux-usb.org/gadget> and
           the kernel DocBook documentation for this API.
 
+if USB_GADGET
+
 config USB_GADGET_DEBUG
        boolean "Debugging messages"
        depends on USB_GADGET && DEBUG_KERNEL && EXPERIMENTAL
@@ -67,6 +68,17 @@ config USB_GADGET_DEBUG_FILES
           driver on a new board.   Enable these files by choosing "Y"
           here.  If in doubt, or to conserve kernel memory, say "N".
 
+config USB_GADGET_DEBUG_FS
+       boolean "Debugging information files in debugfs"
+       depends on USB_GADGET && DEBUG_FS
+       help
+          Some of the drivers in the "gadget" framework can expose
+          debugging information in files under /sys/kernel/debug/.
+          The information in these files may help when you're
+          troubleshooting or bringing up a driver on a new board.
+          Enable these files by choosing "Y" here.  If in doubt, or
+          to conserve kernel memory, say "N".
+
 config USB_GADGET_SELECTED
        boolean
 
@@ -103,6 +115,20 @@ config USB_AMD5536UDC
        default USB_GADGET
        select USB_GADGET_SELECTED
 
+config USB_GADGET_ATMEL_USBA
+       boolean "Atmel USBA"
+       select USB_GADGET_DUALSPEED
+       depends on AVR32
+       help
+         USBA is the integrated high-speed USB Device controller on
+         the AT32AP700x processors from Atmel.
+
+config USB_ATMEL_USBA
+       tristate
+       depends on USB_GADGET_ATMEL_USBA
+       default USB_GADGET
+       select USB_GADGET_SELECTED
+
 config USB_GADGET_FSL_USB2
        boolean "Freescale Highspeed USB DR Peripheral Controller"
        depends on MPC834x || PPC_MPC831x
@@ -195,6 +221,16 @@ config USB_M66592
        default USB_GADGET
        select USB_GADGET_SELECTED
 
+config SUPERH_BUILT_IN_M66592
+       boolean "Enable SuperH built-in USB like the M66592"
+       depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
+       help
+          SH7722 has USB like the M66592.
+
+          The transfer rate is very slow when use "Ethernet Gadget".
+          However, this problem is improved if change a value of
+          NET_IP_ALIGN to 4.
+
 config USB_GADGET_GOKU
        boolean "Toshiba TC86C001 'Goku-S'"
        depends on PCI
@@ -228,7 +264,6 @@ config USB_LH7A40X
        default USB_GADGET
        select USB_GADGET_SELECTED
 
-
 config USB_GADGET_OMAP
        boolean "OMAP USB Device Controller"
        depends on ARCH_OMAP
@@ -284,7 +319,7 @@ config USB_S3C2410_DEBUG
 
 config USB_GADGET_AT91
        boolean "AT91 USB Device Port"
-       depends on ARCH_AT91 && !ARCH_AT91SAM9RL
+       depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
        select USB_GADGET_SELECTED
        help
           Many Atmel AT91 processors (such as the AT91RM2000) have a
@@ -514,6 +549,20 @@ config USB_MIDI_GADGET
          Say "y" to link the driver statically, or "m" to build a
          dynamically linked module called "g_midi".
 
+config USB_G_PRINTER
+       tristate "Printer Gadget"
+       help
+         The Printer Gadget channels data between the USB host and a
+         userspace program driving the print engine. The user space
+         program reads and writes the device file /dev/g_printer to
+         receive or send printer data. It can use ioctl calls to
+         the device file to get or set printer status.
+
+         Say "y" to link the driver statically, or "m" to build a
+         dynamically linked module called "g_printer".
+
+         For more information, see Documentation/usb/gadget_printer.txt
+         which includes sample code for accessing the device file.
 
 # put drivers that need isochronous transfer support (for audio
 # or video class gadget drivers), or specific hardware, here.
@@ -522,4 +571,4 @@ config USB_MIDI_GADGET
 
 endchoice
 
-endmenu
+endif # USB_GADGET