Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip"

[pandora-kernel.git] / drivers / tty / serial / omap-serial.c

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d192dcb..ca54f03 100644 (file)
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -46,6 +46,18 @@
 
 #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
 
+/* SCR register bitmasks */
+#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK              (1 << 7)
+#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK              (1 << 6)
+
+/* FCR register bitmasks */
+#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT               6
+#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK                        (0x3 << 6)
+#define OMAP_UART_FCR_TX_FIFO_TRIG_SHIFT               4
+
+/* TLR register bitmasks */
+#define OMAP_UART_TLR_TX_FIFO_TRIG_DMA_SHIFT           0
+
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 
 /* Forward declaration of functions */
@@ -694,6 +706,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
        unsigned char efr = 0;
        unsigned long flags = 0;
        unsigned int baud, quot;
+       u32 tlr;
 
        switch (termios->c_cflag & CSIZE) {
        case CS5:
@@ -811,14 +824,28 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
        up->mcr = serial_in(up, UART_MCR);
        serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
        /* FIFO ENABLE, DMA MODE */
-       serial_out(up, UART_FCR, up->fcr);
-       serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+
+       up->scr |= OMAP_UART_SCR_TX_TRIG_GRANU1_MASK;
+       up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
 
        if (up->use_dma) {
-               serial_out(up, UART_TI752_TLR, 0);
-               up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8);
+               tlr = 0;
+       } else {
+               up->scr &= ~OMAP_UART_SCR_TX_EMPTY;
+
+               /* Set receive FIFO threshold to 1 */
+               up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
+               up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT);
+
+               /* Set TX FIFO threshold to "63" (actually 1) */
+               up->fcr |= (0x3 << OMAP_UART_FCR_TX_FIFO_TRIG_SHIFT);
+               tlr = (0xf << OMAP_UART_TLR_TX_FIFO_TRIG_DMA_SHIFT);
        }
 
+       serial_out(up, UART_TI752_TLR, tlr);
+       serial_out(up, UART_FCR, up->fcr);
+       serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+
        serial_out(up, UART_OMAP_SCR, up->scr);
 
        serial_out(up, UART_EFR, up->efr);
@@ -1160,7 +1187,7 @@ static struct uart_driver serial_omap_reg = {
        .cons           = OMAP_CONSOLE,
 };
 
-#ifdef CONFIG_SUSPEND
+#ifdef CONFIG_PM_SLEEP
 static int serial_omap_suspend(struct device *dev)
 {
        struct uart_omap_port *up = dev_get_drvdata(dev);
@@ -1521,6 +1548,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
        }
 }
 
+#ifdef CONFIG_PM_RUNTIME
 static void serial_omap_restore_context(struct uart_omap_port *up)
 {
        if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
@@ -1550,7 +1578,6 @@ static void serial_omap_restore_context(struct uart_omap_port *up)
                serial_out(up, UART_OMAP_MDR1, up->mdr1);
 }
 
-#ifdef CONFIG_PM_RUNTIME
 static int serial_omap_runtime_suspend(struct device *dev)
 {
        struct uart_omap_port *up = dev_get_drvdata(dev);