#define NIC_TAG ((ULONG)'0682')
#define NIC_DBG_STRING ("**RT28xx**")
-#ifdef SNMP_SUPPORT
-// for snmp
-// to get manufacturer OUI, kathy, 2008_0220
-#define ManufacturerOUI_LEN 3
-#define ManufacturerNAME ("Ralink Technology Company.")
-#define ResourceTypeIdName ("Ralink_ID")
-#endif
-
-
#define RALINK_2883_VERSION ((UINT32)0x28830300)
#define RALINK_2880E_VERSION ((UINT32)0x28720200)
#define RALINK_3070_VERSION ((UINT32)0x30700200)
// Entry number for each DMA descriptor ring
//
+#ifdef RT2860
#define TX_RING_SIZE 64 //64
#define MGMT_RING_SIZE 128
#define RX_RING_SIZE 128 //64
#define MAX_DMA_DONE_PROCESS TX_RING_SIZE
#define MAX_TX_DONE_PROCESS TX_RING_SIZE //8
#define LOCAL_TXBUF_SIZE 2
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// MC: Multple Cards
-#define MAX_NUM_OF_MULTIPLE_CARD 32
-#endif // MULTIPLE_CARD_SUPPORT //
+#endif
+#ifdef RT2870
+#define TX_RING_SIZE 8 // 1
+#define PRIO_RING_SIZE 8
+#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE
+#define RX_RING_SIZE 8
+#define MAX_TX_PROCESS 4
+#define LOCAL_TXBUF_SIZE 2048
+#endif // RT2870 //
#define MAX_RX_PROCESS 128 //64 //32
#define NUM_OF_LOCAL_TXBUF 2
#define MAX_PACKETS_IN_PS_QUEUE 128 //32
#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
-
+#ifdef RT30xx
+//2008/09/11:KH add to support efuse<--
+#define MAX_EEPROM_BIN_FILE_SIZE 1024
+//2008/09/11:KH add to support efuse-->
+#endif
// RxFilter
#define STANORMAL 0x17f97
#define fOP_STATUS_WAKEUP_NOW 0x00008000
#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000
+#ifdef RT2860
//
// RTMP_ADAPTER PSFlags : related to advanced power save.
//
// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me
//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
#define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008
-
-#ifdef DOT11N_DRAFT3
-#define fOP_STATUS_SCAN_2040 0x00040000
-#endif // DOT11N_DRAFT3 //
+#endif
#define CCKSETPROTECT 0x1
#define OFDMSETPROTECT 0x2
#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE 0x00000400
#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */
-#ifdef DOT11N_DRAFT3
-#define fCLIENT_STATUS_BSSCOEXIST_CAPABLE 0x00001000
-#endif // DOT11N_DRAFT3 //
-
#define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000
//
// STA configuration flags
#define MAX_MESH_NUM 0
#define MAX_APCLI_NUM 0
-#ifdef APCLI_SUPPORT
-#undef MAX_APCLI_NUM
-#define MAX_APCLI_NUM 1
-#endif // APCLI_SUPPORT //
#define MAX_MBSSID_NUM 1
+#if defined(RT2860) || defined(RT30xx)
#ifdef MBSS_SUPPORT
#undef MAX_MBSSID_NUM
#define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM)
#endif // MBSS_SUPPORT //
+#endif
/* sanity check for apidx */
#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
// For 802.11n D3.03
//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet
#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element
+#ifdef RT2870
+#define IE_WAPI 68 // WAPI information element
+#endif
#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3
#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03
#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03
#define AP_CNTL_STATE_MACHINE 15
#define AP_WPA_STATE_MACHINE 16
-#ifdef QOS_DLS_SUPPORT
-#define DLS_STATE_MACHINE 26
-#endif // QOS_DLS_SUPPORT //
+#ifdef RT30xx
+#define WSC_STATE_MACHINE 17
+#define WSC_UPNP_STATE_MACHINE 18
+#endif
//
// STA's CONTROL/CONNECT state machine: states, events, total function #
#define CNTL_WAIT_AUTH2 7
#define CNTL_WAIT_OID_LIST_SCAN 8
#define CNTL_WAIT_OID_DISASSOC 9
+#ifdef RT2870
+#define CNTL_WAIT_SCAN_FOR_CONNECT 10
+#endif // RT2870 //
#define MT2_ASSOC_CONF 34
#define MT2_AUTH_CONF 35
#define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
-#ifdef APCLI_SUPPORT
-//ApCli authentication state machine
-#define APCLI_AUTH_REQ_IDLE 0
-#define APCLI_AUTH_WAIT_SEQ2 1
-#define APCLI_AUTH_WAIT_SEQ4 2
-#define APCLI_MAX_AUTH_STATE 3
-
-#define APCLI_AUTH_MACHINE_BASE 0
-#define APCLI_MT2_MLME_AUTH_REQ 0
-#define APCLI_MT2_MLME_DEAUTH_REQ 1
-#define APCLI_MT2_PEER_AUTH_EVEN 2
-#define APCLI_MT2_PEER_DEAUTH 3
-#define APCLI_MT2_AUTH_TIMEOUT 4
-#define APCLI_MAX_AUTH_MSG 5
-
-#define APCLI_AUTH_FUNC_SIZE (APCLI_MAX_AUTH_STATE * APCLI_MAX_AUTH_MSG)
-
-//ApCli association state machine
-#define APCLI_ASSOC_IDLE 0
-#define APCLI_ASSOC_WAIT_RSP 1
-#define APCLI_MAX_ASSOC_STATE 2
-
-#define APCLI_ASSOC_MACHINE_BASE 0
-#define APCLI_MT2_MLME_ASSOC_REQ 0
-#define APCLI_MT2_MLME_DISASSOC_REQ 1
-#define APCLI_MT2_PEER_DISASSOC_REQ 2
-#define APCLI_MT2_PEER_ASSOC_RSP 3
-#define APCLI_MT2_ASSOC_TIMEOUT 4
-#define APCLI_MAX_ASSOC_MSG 5
-
-#define APCLI_ASSOC_FUNC_SIZE (APCLI_MAX_ASSOC_STATE * APCLI_MAX_ASSOC_MSG)
-
-//ApCli sync state machine
-#define APCLI_SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_JOIN_WAIT_PROBE_RSP 1
-#define APCLI_MAX_SYNC_STATE 2
-
-#define APCLI_SYNC_MACHINE_BASE 0
-#define APCLI_MT2_MLME_PROBE_REQ 0
-#define APCLI_MT2_PEER_PROBE_RSP 1
-#define APCLI_MT2_PROBE_TIMEOUT 2
-#define APCLI_MAX_SYNC_MSG 3
-
-#define APCLI_SYNC_FUNC_SIZE (APCLI_MAX_SYNC_STATE * APCLI_MAX_SYNC_MSG)
-
-//ApCli ctrl state machine
-#define APCLI_CTRL_DISCONNECTED 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_CTRL_PROBE 1
-#define APCLI_CTRL_AUTH 2
-#define APCLI_CTRL_AUTH_2 3
-#define APCLI_CTRL_ASSOC 4
-#define APCLI_CTRL_DEASSOC 5
-#define APCLI_CTRL_CONNECTED 6
-#define APCLI_MAX_CTRL_STATE 7
-
-#define APCLI_CTRL_MACHINE_BASE 0
-#define APCLI_CTRL_JOIN_REQ 0
-#define APCLI_CTRL_PROBE_RSP 1
-#define APCLI_CTRL_AUTH_RSP 2
-#define APCLI_CTRL_DISCONNECT_REQ 3
-#define APCLI_CTRL_PEER_DISCONNECT_REQ 4
-#define APCLI_CTRL_ASSOC_RSP 5
-#define APCLI_CTRL_DEASSOC_RSP 6
-#define APCLI_CTRL_JOIN_REQ_TIMEOUT 7
-#define APCLI_CTRL_AUTH_REQ_TIMEOUT 8
-#define APCLI_CTRL_ASSOC_REQ_TIMEOUT 9
-#define APCLI_MAX_CTRL_MSG 10
-
-#define APCLI_CTRL_FUNC_SIZE (APCLI_MAX_CTRL_STATE * APCLI_MAX_CTRL_MSG)
-
-#endif // APCLI_SUPPORT //
-
-
// =============================================================================
// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
// Preamble MODE in TxD
#define MODE_CCK 0
#define MODE_OFDM 1
-#ifdef DOT11_N_SUPPORT
#define MODE_HTMIX 2
#define MODE_HTGREENFIELD 3
-#endif // DOT11_N_SUPPORT //
+
// MCS for CCK. BW.SGI.STBC are reserved
#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps
#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps
#define MCS_32 32
#define MCS_AUTO 33
-#ifdef DOT11_N_SUPPORT
// OID_HTPHYMODE
// MODE
#define HTMODE_MM 0
#define HTMODE_GF 1
-#endif // DOT11_N_SUPPORT //
// Fixed Tx MODE - HT, CCK or OFDM
#define FIXED_TXMODE_HT 0
#define BW_BOTH BAND_WIDTH_BOTH
#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-#ifdef DOT11_N_SUPPORT
// SHORTGI
#define GI_400 GAP_INTERVAL_400 // only support in HT mode
#define GI_BOTH GAP_INTERVAL_BOTH
-#endif // DOT11_N_SUPPORT //
#define GI_800 GAP_INTERVAL_800
// STBC
#define STBC_NONE 0
-#ifdef DOT11_N_SUPPORT
#define STBC_USE 1 // limited use in rt2860b phy
#define RXSTBC_ONE 1 // rx support of one spatial stream
#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream
#define AMSDU_0 0
#define AMSDU_1 1
-#endif // DOT11_N_SUPPORT //
-
// MCS use 7 bits
#define TXRATEMIMO 0x80
#define TXRATEMCS 0x7F
#define RFIC_2750 4 // 2.4G/5G 1T2R
#define RFIC_3020 5 // 2.4G 1T1R
#define RFIC_2020 6 // 2.4G B/G
+#ifdef RT30xx
+#define RFIC_3021 7 // 2.4G 1T2R
+#define RFIC_3022 8 // 2.4G 2T2R
+#endif
// LED Status.
#define LED_LINK_DOWN 0
#define OPMODE_AP 1
//#define OPMODE_L3_BRG 2 // as AP and STA at the same time
-#ifdef RT_BIG_ENDIAN
-#define DIR_READ 0
-#define DIR_WRITE 1
-#define TYPE_TXD 0
-#define TYPE_RXD 1
-#define TYPE_TXINFO 0
-#define TYPE_RXINFO 1
-#define TYPE_TXWI 0
-#define TYPE_RXWI 1
-#endif
-
// ========================= AP rtmp_def.h ===========================
// value domain for pAd->EventTab.Log[].Event
#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point"
#define INT_MESH 0x0500
// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-#ifdef RALINK_ATE
-#define ATE_START 0x00 // Start ATE
-#define ATE_STOP 0x80 // Stop ATE
-#define ATE_TXCONT 0x05 // Continuous Transmit
-#define ATE_TXCARR 0x09 // Transmit Carrier
-#define ATE_TXCARRSUPP 0x11 // Transmit Carrier Suppression
-#define ATE_TXFRAME 0x01 // Transmit Frames
-#define ATE_RXFRAME 0x02 // Receive Frames
-#ifdef RALINK_28xx_QA
-#define ATE_TXSTOP 0xe2 // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
-#define ATE_RXSTOP 0xfd // Stop receiving Frames
-#define BBP22_TXFRAME 0x00 // Transmit Frames
-#define BBP22_TXCONT_OR_CARRSUPP 0x80 // Continuous Transmit or Carrier Suppression
-#define BBP22_TXCARR 0xc1 // Transmit Carrier
-#define BBP24_TXCONT 0x00 // Continuous Transmit
-#define BBP24_CARRSUPP 0x01 // Carrier Suppression
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
// WEP Key TYPE
#define WEP_HEXADECIMAL_TYPE 0
// End - WIRELESS EVENTS definition
-#ifdef CONFIG_STA_SUPPORT
// definition for DLS, kathy
#define MAX_NUM_OF_INIT_DLS_ENTRY 1
#define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY
#define MAX_RX_REORDERBUF 64
#define DEFAULT_TX_TIMEOUT 30
#define DEFAULT_RX_TIMEOUT 30
-#ifndef CONFIG_AP_SUPPORT
#define MAX_BARECI_SESSION 8
-#endif
#ifndef IW_ESSID_MAX_SIZE
/* Maximum size of the ESSID and pAd->nickname strings */
#define IW_ESSID_MAX_SIZE 32
#endif
-#endif // CONFIG_STA_SUPPORT //
#ifdef MCAST_RATE_SPECIFIC
#define MCAST_DISABLE 0
#define MCAST_HTMIX 3
#endif // MCAST_RATE_SPECIFIC //
+#ifdef RT2860
// For AsicRadioOff/AsicRadioOn/AsicForceWakeup function
// This is to indicate from where to call this function.
#define DOT11POWERSAVE 0 // TO do .11 power save sleep
#define RTMP_HALT 2 // Called from Halt handler.
#define GUI_IDLE_POWER_SAVE 3 // Call to sleep before link up with AP
#define FROM_TX 4 // Force wake up from Tx packet.
-
-
+#endif
+#ifdef RT2870
+// For AsicRadioOff/AsicRadioOn function
+#define DOT11POWERSAVE 0
+#define GUIRADIO_OFF 1
+#define RTMP_HALT 2
+#define GUI_IDLE_POWER_SAVE 3
+#endif
// definition for WpaSupport flag
#define WPA_SUPPLICANT_DISABLE 0
(UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
(UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
-#ifdef RT_BIG_ENDIAN
-
-#define cpu2le64(x) SWAP64((x))
-#define le2cpu64(x) SWAP64((x))
-#define cpu2le32(x) SWAP32((x))
-#define le2cpu32(x) SWAP32((x))
-#define cpu2le16(x) SWAP16((x))
-#define le2cpu16(x) SWAP16((x))
-#define cpu2be64(x) ((UINT64)(x))
-#define be2cpu64(x) ((UINT64)(x))
-#define cpu2be32(x) ((UINT32)(x))
-#define be2cpu32(x) ((UINT32)(x))
-#define cpu2be16(x) ((UINT16)(x))
-#define be2cpu16(x) ((UINT16)(x))
-
-#else // Little_Endian
-
#define cpu2le64(x) ((UINT64)(x))
#define le2cpu64(x) ((UINT64)(x))
#define cpu2le32(x) ((UINT32)(x))
#define cpu2be16(x) SWAP16((x))
#define be2cpu16(x) SWAP16((x))
-#endif // RT_BIG_ENDIAN
-
#endif // __RTMP_DEF_H__
git.openpandora.org / pandora-kernel.git / blobdiff