*
* The actual value is this field multiplied by two.
*/
-#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
-#define BLM_LEGACY_MODE (1 << 16)
+#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
+#define BLM_LEGACY_MODE (1 << 16)
/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
* This field must be no greater than the number of cycles in the complete
* backlight modulation cycle.
*/
-#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
-#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
+#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
#define I915_GCFGC 0xf0
-#define I915_LOW_FREQUENCY_ENABLE (1 << 7)
-#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
-#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4)
-#define I915_DISPLAY_CLOCK_MASK (7 << 4)
+#define I915_LOW_FREQUENCY_ENABLE (1 << 7)
+#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
+#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4)
+#define I915_DISPLAY_CLOCK_MASK (7 << 4)
#define I855_HPLLCC 0xc0
-#define I855_CLOCK_CONTROL_MASK (3 << 0)
-#define I855_CLOCK_133_200 (0 << 0)
-#define I855_CLOCK_100_200 (1 << 0)
-#define I855_CLOCK_100_133 (2 << 0)
-#define I855_CLOCK_166_250 (3 << 0)
+#define I855_CLOCK_CONTROL_MASK (3 << 0)
+#define I855_CLOCK_133_200 (0 << 0)
+#define I855_CLOCK_100_200 (1 << 0)
+#define I855_CLOCK_100_133 (2 << 0)
+#define I855_CLOCK_166_250 (3 << 0)
/* I830 CRTC registers */
-#define HTOTAL_A 0x60000
-#define HBLANK_A 0x60004
-#define HSYNC_A 0x60008
-#define VTOTAL_A 0x6000c
-#define VBLANK_A 0x60010
-#define VSYNC_A 0x60014
-#define PIPEASRC 0x6001c
-#define BCLRPAT_A 0x60020
-#define VSYNCSHIFT_A 0x60028
-
-#define HTOTAL_B 0x61000
-#define HBLANK_B 0x61004
-#define HSYNC_B 0x61008
-#define VTOTAL_B 0x6100c
-#define VBLANK_B 0x61010
-#define VSYNC_B 0x61014
-#define PIPEBSRC 0x6101c
-#define BCLRPAT_B 0x61020
-#define VSYNCSHIFT_B 0x61028
-
-#define HTOTAL_C 0x62000
-#define HBLANK_C 0x62004
-#define HSYNC_C 0x62008
-#define VTOTAL_C 0x6200c
-#define VBLANK_C 0x62010
-#define VSYNC_C 0x62014
-#define PIPECSRC 0x6201c
-#define BCLRPAT_C 0x62020
-#define VSYNCSHIFT_C 0x62028
-
-#define PP_STATUS 0x61200
-# define PP_ON (1 << 31)
+#define HTOTAL_A 0x60000
+#define HBLANK_A 0x60004
+#define HSYNC_A 0x60008
+#define VTOTAL_A 0x6000c
+#define VBLANK_A 0x60010
+#define VSYNC_A 0x60014
+#define PIPEASRC 0x6001c
+#define BCLRPAT_A 0x60020
+#define VSYNCSHIFT_A 0x60028
+
+#define HTOTAL_B 0x61000
+#define HBLANK_B 0x61004
+#define HSYNC_B 0x61008
+#define VTOTAL_B 0x6100c
+#define VBLANK_B 0x61010
+#define VSYNC_B 0x61014
+#define PIPEBSRC 0x6101c
+#define BCLRPAT_B 0x61020
+#define VSYNCSHIFT_B 0x61028
+
+#define HTOTAL_C 0x62000
+#define HBLANK_C 0x62004
+#define HSYNC_C 0x62008
+#define VTOTAL_C 0x6200c
+#define VBLANK_C 0x62010
+#define VSYNC_C 0x62014
+#define PIPECSRC 0x6201c
+#define BCLRPAT_C 0x62020
+#define VSYNCSHIFT_C 0x62028
+
+#define PP_STATUS 0x61200
+# define PP_ON (1 << 31)
/*
* Indicates that all dependencies of the panel are on:
*
* - pipe enabled
* - LVDS/DVOB/DVOC on
*/
-# define PP_READY (1 << 30)
-# define PP_SEQUENCE_NONE (0 << 28)
-# define PP_SEQUENCE_ON (1 << 28)
-# define PP_SEQUENCE_OFF (2 << 28)
-# define PP_SEQUENCE_MASK 0x30000000
-#define PP_CONTROL 0x61204
-# define POWER_TARGET_ON (1 << 0)
-
-#define LVDSPP_ON 0x61208
-#define LVDSPP_OFF 0x6120c
-#define PP_CYCLE 0x61210
-
-#define PFIT_CONTROL 0x61230
-# define PFIT_ENABLE (1 << 31)
-# define PFIT_PIPE_MASK (3 << 29)
-# define PFIT_PIPE_SHIFT 29
-# define PFIT_SCALING_MODE_PILLARBOX (1 << 27)
-# define PFIT_SCALING_MODE_LETTERBOX (3 << 26)
-# define VERT_INTERP_DISABLE (0 << 10)
-# define VERT_INTERP_BILINEAR (1 << 10)
-# define VERT_INTERP_MASK (3 << 10)
-# define VERT_AUTO_SCALE (1 << 9)
-# define HORIZ_INTERP_DISABLE (0 << 6)
-# define HORIZ_INTERP_BILINEAR (1 << 6)
-# define HORIZ_INTERP_MASK (3 << 6)
-# define HORIZ_AUTO_SCALE (1 << 5)
-# define PANEL_8TO6_DITHER_ENABLE (1 << 3)
-
-#define PFIT_PGM_RATIOS 0x61234
-# define PFIT_VERT_SCALE_MASK 0xfff00000
-# define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+#define PP_READY (1 << 30)
+#define PP_SEQUENCE_NONE (0 << 28)
+#define PP_SEQUENCE_ON (1 << 28)
+#define PP_SEQUENCE_OFF (2 << 28)
+#define PP_SEQUENCE_MASK 0x30000000
+#define PP_CONTROL 0x61204
+#define POWER_TARGET_ON (1 << 0)
+
+#define LVDSPP_ON 0x61208
+#define LVDSPP_OFF 0x6120c
+#define PP_CYCLE 0x61210
+
+#define PFIT_CONTROL 0x61230
+#define PFIT_ENABLE (1 << 31)
+#define PFIT_PIPE_MASK (3 << 29)
+#define PFIT_PIPE_SHIFT 29
+#define PFIT_SCALING_MODE_PILLARBOX (1 << 27)
+#define PFIT_SCALING_MODE_LETTERBOX (3 << 26)
+#define VERT_INTERP_DISABLE (0 << 10)
+#define VERT_INTERP_BILINEAR (1 << 10)
+#define VERT_INTERP_MASK (3 << 10)
+#define VERT_AUTO_SCALE (1 << 9)
+#define HORIZ_INTERP_DISABLE (0 << 6)
+#define HORIZ_INTERP_BILINEAR (1 << 6)
+#define HORIZ_INTERP_MASK (3 << 6)
+#define HORIZ_AUTO_SCALE (1 << 5)
+#define PANEL_8TO6_DITHER_ENABLE (1 << 3)
+
+#define PFIT_PGM_RATIOS 0x61234
+#define PFIT_VERT_SCALE_MASK 0xfff00000
+#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
#define PFIT_AUTO_RATIOS 0x61238
-
-#define DPLL_A 0x06014
-#define DPLL_B 0x06018
-# define DPLL_VCO_ENABLE (1 << 31)
-# define DPLL_DVO_HIGH_SPEED (1 << 30)
-# define DPLL_SYNCLOCK_ENABLE (1 << 29)
-# define DPLL_VGA_MODE_DIS (1 << 28)
-# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
-# define DPLLB_MODE_LVDS (2 << 26) /* i915 */
-# define DPLL_MODE_MASK (3 << 26)
-# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
-# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
-# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
-# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
-# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
-# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
+#define DPLL_A 0x06014
+#define DPLL_B 0x06018
+#define DPLL_VCO_ENABLE (1 << 31)
+#define DPLL_DVO_HIGH_SPEED (1 << 30)
+#define DPLL_SYNCLOCK_ENABLE (1 << 29)
+#define DPLL_VGA_MODE_DIS (1 << 28)
+#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
+#define DPLLB_MODE_LVDS (2 << 26) /* i915 */
+#define DPLL_MODE_MASK (3 << 26)
+#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
+#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
+#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
+#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
+#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
+#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
/*
* The i830 generation, in DAC/serial mode, defines p1 as two plus this
* bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
* The i830 generation, in LVDS mode, defines P1 as the bit number set within
* this field (only one bit may be set).
*/
-# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
-# define DPLL_FPA01_P1_POST_DIV_SHIFT 16
-# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required
+#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
+#define DPLL_FPA01_P1_POST_DIV_SHIFT 16
+#define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required
* in DVO non-gang */
-# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
-# define PLL_REF_INPUT_DREFCLK (0 << 13)
-# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
-# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO
+# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
+#define PLL_REF_INPUT_DREFCLK (0 << 13)
+#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
+#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO
* TVCLKIN */
-# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
-# define PLL_REF_INPUT_MASK (3 << 13)
-# define PLL_LOAD_PULSE_PHASE_SHIFT 9
+#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
+#define PLL_REF_INPUT_MASK (3 << 13)
+#define PLL_LOAD_PULSE_PHASE_SHIFT 9
/*
* Parallel to Serial Load Pulse phase selection.
* Selects the phase for the 10X DPLL clock for the PCIe
* digital display port. The range is 4 to 13; 10 or more
* is just a flip delay. The default is 6
*/
-# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
-# define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
+#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+#define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
/*
* SDVO multiplier for 945G/GM. Not used on 965.
*
* DPLL_MD_UDI_MULTIPLIER_MASK
*/
-# define SDVO_MULTIPLIER_MASK 0x000000ff
-# define SDVO_MULTIPLIER_SHIFT_HIRES 4
-# define SDVO_MULTIPLIER_SHIFT_VGA 0
+#define SDVO_MULTIPLIER_MASK 0x000000ff
+#define SDVO_MULTIPLIER_SHIFT_HIRES 4
+#define SDVO_MULTIPLIER_SHIFT_VGA 0
/*
* PLL_MD
*
* Value is pixels minus 1. Must be set to 1 pixel for SDVO.
*/
-# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
-# define DPLL_MD_UDI_DIVIDER_SHIFT 24
+#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
+#define DPLL_MD_UDI_DIVIDER_SHIFT 24
/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
-# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
-# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
+#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
+#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
/*
* SDVO/UDI pixel multiplier.
*
* This register field has values of multiplication factor minus 1, with
* a maximum multiplier of 5 for SDVO.
*/
-# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
-# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
+#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
+#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
/*
* SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
* This best be set to the default value (3) or the CRT won't work. No,
* I don't entirely understand what this does...
*/
-# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
-# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
+#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
+#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
#define DPLL_TEST 0x606c
-# define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
-# define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
-# define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
-# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
-# define DPLLB_TEST_N_BYPASS (1 << 19)
-# define DPLLB_TEST_M_BYPASS (1 << 18)
-# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
-# define DPLLA_TEST_N_BYPASS (1 << 3)
-# define DPLLA_TEST_M_BYPASS (1 << 2)
-# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
+#define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
+#define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
+#define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
+#define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
+#define DPLLB_TEST_N_BYPASS (1 << 19)
+#define DPLLB_TEST_M_BYPASS (1 << 18)
+#define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
+#define DPLLA_TEST_N_BYPASS (1 << 3)
+#define DPLLA_TEST_M_BYPASS (1 << 2)
+#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
#define ADPA 0x61100
-#define ADPA_DAC_ENABLE (1<<31)
-#define ADPA_DAC_DISABLE 0
-#define ADPA_PIPE_SELECT_MASK (1<<30)
-#define ADPA_PIPE_A_SELECT 0
-#define ADPA_PIPE_B_SELECT (1<<30)
-#define ADPA_USE_VGA_HVPOLARITY (1<<15)
-#define ADPA_SETS_HVPOLARITY 0
-#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
-#define ADPA_VSYNC_CNTL_ENABLE 0
-#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
-#define ADPA_HSYNC_CNTL_ENABLE 0
-#define ADPA_VSYNC_ACTIVE_HIGH (1<<4)
-#define ADPA_VSYNC_ACTIVE_LOW 0
-#define ADPA_HSYNC_ACTIVE_HIGH (1<<3)
-#define ADPA_HSYNC_ACTIVE_LOW 0
-
-#define FPA0 0x06040
-#define FPA1 0x06044
-#define FPB0 0x06048
-#define FPB1 0x0604c
-# define FP_N_DIV_MASK 0x003f0000
-# define FP_N_DIV_SHIFT 16
-# define FP_M1_DIV_MASK 0x00003f00
-# define FP_M1_DIV_SHIFT 8
-# define FP_M2_DIV_MASK 0x0000003f
-# define FP_M2_DIV_SHIFT 0
-
+#define ADPA_DAC_ENABLE (1 << 31)
+#define ADPA_DAC_DISABLE 0
+#define ADPA_PIPE_SELECT_MASK (1 << 30)
+#define ADPA_PIPE_A_SELECT 0
+#define ADPA_PIPE_B_SELECT (1 << 30)
+#define ADPA_USE_VGA_HVPOLARITY (1 << 15)
+#define ADPA_SETS_HVPOLARITY 0
+#define ADPA_VSYNC_CNTL_DISABLE (1 << 11)
+#define ADPA_VSYNC_CNTL_ENABLE 0
+#define ADPA_HSYNC_CNTL_DISABLE (1 << 10)
+#define ADPA_HSYNC_CNTL_ENABLE 0
+#define ADPA_VSYNC_ACTIVE_HIGH (1 << 4)
+#define ADPA_VSYNC_ACTIVE_LOW 0
+#define ADPA_HSYNC_ACTIVE_HIGH (1 << 3)
+#define ADPA_HSYNC_ACTIVE_LOW 0
+
+#define FPA0 0x06040
+#define FPA1 0x06044
+#define FPB0 0x06048
+#define FPB1 0x0604c
+#define FP_N_DIV_MASK 0x003f0000
+#define FP_N_DIV_SHIFT 16
+#define FP_M1_DIV_MASK 0x00003f00
+#define FP_M1_DIV_SHIFT 8
+#define FP_M2_DIV_MASK 0x0000003f
+#define FP_M2_DIV_SHIFT 0
#define PORT_HOTPLUG_EN 0x61110
-# define SDVOB_HOTPLUG_INT_EN (1 << 26)
-# define SDVOC_HOTPLUG_INT_EN (1 << 25)
-# define TV_HOTPLUG_INT_EN (1 << 18)
-# define CRT_HOTPLUG_INT_EN (1 << 9)
-# define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
+#define SDVOB_HOTPLUG_INT_EN (1 << 26)
+#define SDVOC_HOTPLUG_INT_EN (1 << 25)
+#define TV_HOTPLUG_INT_EN (1 << 18)
+#define CRT_HOTPLUG_INT_EN (1 << 9)
+#define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
#define PORT_HOTPLUG_STAT 0x61114
-# define CRT_HOTPLUG_INT_STATUS (1 << 11)
-# define TV_HOTPLUG_INT_STATUS (1 << 10)
-# define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
-# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
-# define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
-# define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
-# define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
-# define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
+#define CRT_HOTPLUG_INT_STATUS (1 << 11)
+#define TV_HOTPLUG_INT_STATUS (1 << 10)
+#define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
+#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
+#define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
+#define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
+#define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
+#define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
#define SDVOB 0x61140
#define SDVOC 0x61160
-#define SDVO_ENABLE (1 << 31)
-#define SDVO_PIPE_B_SELECT (1 << 30)
-#define SDVO_STALL_SELECT (1 << 29)
-#define SDVO_INTERRUPT_ENABLE (1 << 26)
+#define SDVO_ENABLE (1 << 31)
+#define SDVO_PIPE_B_SELECT (1 << 30)
+#define SDVO_STALL_SELECT (1 << 29)
+#define SDVO_INTERRUPT_ENABLE (1 << 26)
+
/**
* 915G/GM SDVO pixel multiplier.
*
*
* DPLL_MD_UDI_MULTIPLIER_MASK
*/
-#define SDVO_PORT_MULTIPLY_MASK (7 << 23)
-#define SDVO_PORT_MULTIPLY_SHIFT 23
-#define SDVO_PHASE_SELECT_MASK (15 << 19)
-#define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
-#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
-#define SDVOC_GANG_MODE (1 << 16)
-#define SDVO_BORDER_ENABLE (1 << 7)
-#define SDVOB_PCIE_CONCURRENCY (1 << 3)
-#define SDVO_DETECTED (1 << 2)
+#define SDVO_PORT_MULTIPLY_MASK (7 << 23)
+#define SDVO_PORT_MULTIPLY_SHIFT 23
+#define SDVO_PHASE_SELECT_MASK (15 << 19)
+#define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
+#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
+#define SDVOC_GANG_MODE (1 << 16)
+#define SDVO_BORDER_ENABLE (1 << 7)
+#define SDVOB_PCIE_CONCURRENCY (1 << 3)
+#define SDVO_DETECTED (1 << 2)
/* Bits to be preserved when writing */
#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14))
-#define SDVOC_PRESERVE_MASK (1 << 17)
+#define SDVOC_PRESERVE_MASK (1 << 17)
/*
* This register controls the LVDS output enable, pipe selection, and data
* Enables the LVDS port. This bit must be set before DPLLs are enabled, as
* the DPLL semantics change when the LVDS is assigned to that pipe.
*/
-# define LVDS_PORT_EN (1 << 31)
+#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
-# define LVDS_PIPEB_SELECT (1 << 30)
+#define LVDS_PIPEB_SELECT (1 << 30)
/* Turns on border drawing to allow centered display. */
-# define LVDS_BORDER_EN (1 << 15)
+#define LVDS_BORDER_EN (1 << 15)
/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
*/
-# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
-# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
-# define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
+#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
+#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
+#define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
/*
* Controls the A3 data pair, which contains the additional LSBs for 24 bit
* mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
* on.
*/
-# define LVDS_A3_POWER_MASK (3 << 6)
-# define LVDS_A3_POWER_DOWN (0 << 6)
-# define LVDS_A3_POWER_UP (3 << 6)
+#define LVDS_A3_POWER_MASK (3 << 6)
+#define LVDS_A3_POWER_DOWN (0 << 6)
+#define LVDS_A3_POWER_UP (3 << 6)
/*
* Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
* is set.
*/
-# define LVDS_CLKB_POWER_MASK (3 << 4)
-# define LVDS_CLKB_POWER_DOWN (0 << 4)
-# define LVDS_CLKB_POWER_UP (3 << 4)
+#define LVDS_CLKB_POWER_MASK (3 << 4)
+#define LVDS_CLKB_POWER_DOWN (0 << 4)
+#define LVDS_CLKB_POWER_UP (3 << 4)
/*
* Controls the B0-B3 data pairs. This must be set to match the DPLL p2
* setting for whether we are in dual-channel mode. The B3 pair will
* additionally only be powered up when LVDS_A3_POWER_UP is set.
*/
-# define LVDS_B0B3_POWER_MASK (3 << 2)
-# define LVDS_B0B3_POWER_DOWN (0 << 2)
-# define LVDS_B0B3_POWER_UP (3 << 2)
-
-#define PIPEACONF 0x70008
-#define PIPEACONF_ENABLE (1<<31)
-#define PIPEACONF_DISABLE 0
-#define PIPEACONF_DOUBLE_WIDE (1<<30)
-#define PIPECONF_ACTIVE (1<<30)
-#define I965_PIPECONF_ACTIVE (1<<30)
-#define PIPECONF_DSIPLL_LOCK (1<<29)
-#define PIPEACONF_SINGLE_WIDE 0
-#define PIPEACONF_PIPE_UNLOCKED 0
-#define PIPEACONF_DSR (1<<26)
-#define PIPEACONF_PIPE_LOCKED (1<<25)
-#define PIPEACONF_PALETTE 0
-#define PIPECONF_FORCE_BORDER (1<<25)
-#define PIPEACONF_GAMMA (1<<24)
-#define PIPECONF_PROGRESSIVE (0 << 21)
+#define LVDS_B0B3_POWER_MASK (3 << 2)
+#define LVDS_B0B3_POWER_DOWN (0 << 2)
+#define LVDS_B0B3_POWER_UP (3 << 2)
+
+#define PIPEACONF 0x70008
+#define PIPEACONF_ENABLE (1 << 31)
+#define PIPEACONF_DISABLE 0
+#define PIPEACONF_DOUBLE_WIDE (1 << 30)
+#define PIPECONF_ACTIVE (1 << 30)
+#define I965_PIPECONF_ACTIVE (1 << 30)
+#define PIPECONF_DSIPLL_LOCK (1 << 29)
+#define PIPEACONF_SINGLE_WIDE 0
+#define PIPEACONF_PIPE_UNLOCKED 0
+#define PIPEACONF_DSR (1 << 26)
+#define PIPEACONF_PIPE_LOCKED (1 << 25)
+#define PIPEACONF_PALETTE 0
+#define PIPECONF_FORCE_BORDER (1 << 25)
+#define PIPEACONF_GAMMA (1 << 24)
+#define PIPECONF_PROGRESSIVE (0 << 21)
#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
-#define PIPECONF_PLANE_OFF (1<<19)
-#define PIPECONF_CURSOR_OFF (1<<18)
+#define PIPECONF_PLANE_OFF (1 << 19)
+#define PIPECONF_CURSOR_OFF (1 << 18)
+#define PIPEBCONF 0x71008
+#define PIPEBCONF_ENABLE (1 << 31)
+#define PIPEBCONF_DISABLE 0
+#define PIPEBCONF_DOUBLE_WIDE (1 << 30)
+#define PIPEBCONF_DISABLE 0
+#define PIPEBCONF_GAMMA (1 << 24)
+#define PIPEBCONF_PALETTE 0
-#define PIPEBCONF 0x71008
-#define PIPEBCONF_ENABLE (1<<31)
-#define PIPEBCONF_DISABLE 0
-#define PIPEBCONF_DOUBLE_WIDE (1<<30)
-#define PIPEBCONF_DISABLE 0
-#define PIPEBCONF_GAMMA (1<<24)
-#define PIPEBCONF_PALETTE 0
-
-#define PIPECCONF 0x72008
+#define PIPECCONF 0x72008
#define PIPEBGCMAXRED 0x71010
#define PIPEBGCMAXGREEN 0x71014
#define PIPEBGCMAXBLUE 0x71018
-#define PIPEASTAT 0x70024
+#define PIPEASTAT 0x70024
#define PIPEBSTAT 0x71024
#define PIPECSTAT 0x72024
-#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1)
-#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2)
-#define PIPE_VBLANK_CLEAR (1 << 1)
-#define PIPE_VBLANK_STATUS (1 << 1)
-#define PIPE_TE_STATUS (1UL<<6)
-#define PIPE_DPST_EVENT_STATUS (1UL<<7)
-#define PIPE_VSYNC_CLEAR (1UL<<9)
-#define PIPE_VSYNC_STATUS (1UL<<9)
-#define PIPE_HDMI_AUDIO_UNDERRUN_STATUS (1UL<<10)
-#define PIPE_HDMI_AUDIO_BUFFER_DONE_STATUS (1UL<<11)
-#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17)
-#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18)
-#define PIPE_TE_ENABLE (1UL<<22)
-#define PIPE_DPST_EVENT_ENABLE (1UL<<23)
-#define PIPE_VSYNC_ENABL (1UL<<25)
-#define PIPE_HDMI_AUDIO_UNDERRUN (1UL<<26)
-#define PIPE_HDMI_AUDIO_BUFFER_DONE (1UL<<27)
-#define PIPE_HDMI_AUDIO_INT_MASK (PIPE_HDMI_AUDIO_UNDERRUN | PIPE_HDMI_AUDIO_BUFFER_DONE)
+#define PIPE_VBLANK_INTERRUPT_STATUS (1UL << 1)
+#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL << 2)
+#define PIPE_VBLANK_CLEAR (1 << 1)
+#define PIPE_VBLANK_STATUS (1 << 1)
+#define PIPE_TE_STATUS (1UL << 6)
+#define PIPE_DPST_EVENT_STATUS (1UL << 7)
+#define PIPE_VSYNC_CLEAR (1UL << 9)
+#define PIPE_VSYNC_STATUS (1UL << 9)
+#define PIPE_HDMI_AUDIO_UNDERRUN_STATUS (1UL << 10)
+#define PIPE_HDMI_AUDIO_BUFFER_DONE_STATUS (1UL << 11)
+#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL << 17)
+#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL << 18)
+#define PIPE_TE_ENABLE (1UL << 22)
+#define PIPE_DPST_EVENT_ENABLE (1UL << 23)
+#define PIPE_VSYNC_ENABL (1UL << 25)
+#define PIPE_HDMI_AUDIO_UNDERRUN (1UL << 26)
+#define PIPE_HDMI_AUDIO_BUFFER_DONE (1UL << 27)
+#define PIPE_HDMI_AUDIO_INT_MASK (PIPE_HDMI_AUDIO_UNDERRUN | \
+ PIPE_HDMI_AUDIO_BUFFER_DONE)
#define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16))
#define PIPE_VBLANK_MASK ((1 << 25)|(1 << 24)|(1 << 18)|(1 << 17))
#define HISTOGRAM_INT_CONTROL 0x61268
#define HISTOGRAM_BIN_DATA 0X61264
#define HISTOGRAM_LOGIC_CONTROL 0x61260
#define PWM_CONTROL_LOGIC 0x61250
-#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10)
-#define HISTOGRAM_INTERRUPT_ENABLE (1UL<<31)
-#define HISTOGRAM_LOGIC_ENABLE (1UL<<31)
-#define PWM_LOGIC_ENABLE (1UL<<31)
-#define PWM_PHASEIN_ENABLE (1UL<<25)
-#define PWM_PHASEIN_INT_ENABLE (1UL<<24)
-#define PWM_PHASEIN_VB_COUNT 0x00001f00
-#define PWM_PHASEIN_INC 0x0000001f
-#define HISTOGRAM_INT_CTRL_CLEAR (1UL<<30)
-#define DPST_YUV_LUMA_MODE 0
+#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL << 10)
+#define HISTOGRAM_INTERRUPT_ENABLE (1UL << 31)
+#define HISTOGRAM_LOGIC_ENABLE (1UL << 31)
+#define PWM_LOGIC_ENABLE (1UL << 31)
+#define PWM_PHASEIN_ENABLE (1UL << 25)
+#define PWM_PHASEIN_INT_ENABLE (1UL << 24)
+#define PWM_PHASEIN_VB_COUNT 0x00001f00
+#define PWM_PHASEIN_INC 0x0000001f
+#define HISTOGRAM_INT_CTRL_CLEAR (1UL << 30)
+#define DPST_YUV_LUMA_MODE 0
struct dpst_ie_histogram_control {
union {
#define PIPEBFRAMEPIXEL 0x71044
#define PIPECFRAMEHIGH 0x72040
#define PIPECFRAMEPIXEL 0x72044
-#define PIPE_FRAME_HIGH_MASK 0x0000ffff
-#define PIPE_FRAME_HIGH_SHIFT 0
-#define PIPE_FRAME_LOW_MASK 0xff000000
-#define PIPE_FRAME_LOW_SHIFT 24
-#define PIPE_PIXEL_MASK 0x00ffffff
-#define PIPE_PIXEL_SHIFT 0
+#define PIPE_FRAME_HIGH_MASK 0x0000ffff
+#define PIPE_FRAME_HIGH_SHIFT 0
+#define PIPE_FRAME_LOW_MASK 0xff000000
+#define PIPE_FRAME_LOW_SHIFT 24
+#define PIPE_PIXEL_MASK 0x00ffffff
+#define PIPE_PIXEL_SHIFT 0
#define DSPARB 0x70030
#define DSPFW1 0x70034
#define DSPACNTR 0x70180
#define DSPBCNTR 0x71180
#define DSPCCNTR 0x72180
-#define DISPLAY_PLANE_ENABLE (1<<31)
+#define DISPLAY_PLANE_ENABLE (1 << 31)
#define DISPLAY_PLANE_DISABLE 0
-#define DISPPLANE_GAMMA_ENABLE (1<<30)
+#define DISPPLANE_GAMMA_ENABLE (1 << 30)
#define DISPPLANE_GAMMA_DISABLE 0
-#define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
-#define DISPPLANE_8BPP (0x2<<26)
-#define DISPPLANE_15_16BPP (0x4<<26)
-#define DISPPLANE_16BPP (0x5<<26)
-#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
-#define DISPPLANE_32BPP (0x7<<26)
-#define DISPPLANE_STEREO_ENABLE (1<<25)
+#define DISPPLANE_PIXFORMAT_MASK (0xf << 26)
+#define DISPPLANE_8BPP (0x2 << 26)
+#define DISPPLANE_15_16BPP (0x4 << 26)
+#define DISPPLANE_16BPP (0x5 << 26)
+#define DISPPLANE_32BPP_NO_ALPHA (0x6 << 26)
+#define DISPPLANE_32BPP (0x7 << 26)
+#define DISPPLANE_STEREO_ENABLE (1 << 25)
#define DISPPLANE_STEREO_DISABLE 0
-#define DISPPLANE_SEL_PIPE_MASK (1<<24)
+#define DISPPLANE_SEL_PIPE_MASK (1 << 24)
#define DISPPLANE_SEL_PIPE_POS 24
#define DISPPLANE_SEL_PIPE_A 0
-#define DISPPLANE_SEL_PIPE_B (1<<24)
-#define DISPPLANE_SRC_KEY_ENABLE (1<<22)
+#define DISPPLANE_SEL_PIPE_B (1 << 24)
+#define DISPPLANE_SRC_KEY_ENABLE (1 << 22)
#define DISPPLANE_SRC_KEY_DISABLE 0
-#define DISPPLANE_LINE_DOUBLE (1<<20)
+#define DISPPLANE_LINE_DOUBLE (1 << 20)
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
-#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+#define DISPPLANE_STEREO_POLARITY_SECOND (1 << 18)
/* plane B only */
-#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
+#define DISPPLANE_ALPHA_TRANS_ENABLE (1 << 15)
#define DISPPLANE_ALPHA_TRANS_DISABLE 0
#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0
#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1)
#define DSPCSURF 0x7219C
#define DSPCTILEOFF 0x721A4
-#define DSPCKEYMAXVAL 0x721A0
-#define DSPCKEYMINVAL 0x72194
-#define DSPCKEYMSK 0x72198
+#define DSPCKEYMAXVAL 0x721A0
+#define DSPCKEYMINVAL 0x72194
+#define DSPCKEYMSK 0x72198
#define VGACNTRL 0x71400
-# define VGA_DISP_DISABLE (1 << 31)
-# define VGA_2X_MODE (1 << 30)
-# define VGA_PIPE_B_SELECT (1 << 29)
+#define VGA_DISP_DISABLE (1 << 31)
+#define VGA_2X_MODE (1 << 30)
+#define VGA_PIPE_B_SELECT (1 << 29)
/*
* Overlay registers
*/
#define OV_C_OFFSET 0x08000
#define OV_OVADD 0x30000
-#define OV_DOVASTA 0x30008
-# define OV_PIPE_SELECT ((1 << 6)|(1 << 7))
-# define OV_PIPE_SELECT_POS 6
-# define OV_PIPE_A 0
-# define OV_PIPE_C 1
+#define OV_DOVASTA 0x30008
+# define OV_PIPE_SELECT ((1 << 6)|(1 << 7))
+# define OV_PIPE_SELECT_POS 6
+# define OV_PIPE_A 0
+# define OV_PIPE_C 1
#define OV_OGAMC5 0x30010
#define OV_OGAMC4 0x30014
#define OV_OGAMC3 0x30018
#define OV_OGAMC1 0x30020
#define OV_OGAMC0 0x30024
#define OVC_OVADD 0x38000
-#define OVC_DOVCSTA 0x38008
+#define OVC_DOVCSTA 0x38008
#define OVC_OGAMC5 0x38010
#define OVC_OGAMC4 0x38014
#define OVC_OGAMC3 0x38018
/* Cursor A & B regs */
#define CURACNTR 0x70080
-#define CURSOR_MODE_DISABLE 0x00
-#define CURSOR_MODE_64_32B_AX 0x07
-#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
-#define MCURSOR_GAMMA_ENABLE (1 << 26)
+#define CURSOR_MODE_DISABLE 0x00
+#define CURSOR_MODE_64_32B_AX 0x07
+#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define MCURSOR_GAMMA_ENABLE (1 << 26)
#define CURABASE 0x70084
#define CURAPOS 0x70088
-#define CURSOR_POS_MASK 0x007FF
-#define CURSOR_POS_SIGN 0x8000
-#define CURSOR_X_SHIFT 0
-#define CURSOR_Y_SHIFT 16
+#define CURSOR_POS_MASK 0x007FF
+#define CURSOR_POS_SIGN 0x8000
+#define CURSOR_X_SHIFT 0
+#define CURSOR_Y_SHIFT 16
#define CURBCNTR 0x700c0
#define CURBBASE 0x700c4
#define CURBPOS 0x700c8
/*
* Interrupt Registers
*/
-#define IER 0x020a0
-#define IIR 0x020a4
-#define IMR 0x020a8
-#define ISR 0x020ac
+#define IER 0x020a0
+#define IIR 0x020a4
+#define IMR 0x020a8
+#define ISR 0x020ac
/*
* MOORESTOWN delta registers
*/
#define MRST_DPLL_A 0x0f014
#define MDFLD_DPLL_B 0x0f018
-#define MDFLD_INPUT_REF_SEL (1 << 14)
-#define MDFLD_VCO_SEL (1 << 16)
-#define DPLLA_MODE_LVDS (2 << 26) /* mrst */
-#define MDFLD_PLL_LATCHEN (1 << 28)
-#define MDFLD_PWR_GATE_EN (1 << 30)
-#define MDFLD_P1_MASK (0x1FF << 17)
+#define MDFLD_INPUT_REF_SEL (1 << 14)
+#define MDFLD_VCO_SEL (1 << 16)
+#define DPLLA_MODE_LVDS (2 << 26) /* mrst */
+#define MDFLD_PLL_LATCHEN (1 << 28)
+#define MDFLD_PWR_GATE_EN (1 << 30)
+#define MDFLD_P1_MASK (0x1FF << 17)
#define MRST_FPA0 0x0f040
#define MRST_FPA1 0x0f044
#define MDFLD_DPLL_DIV0 0x0f048
/*
* MEDFIELD HDMI registers
*/
-#define HDMIPHYMISCCTL 0x61134
-# define HDMI_PHY_POWER_DOWN 0x7f
-#define HDMIB_CONTROL 0x61140
-# define HDMIB_PORT_EN (1 << 31)
-# define HDMIB_PIPE_B_SELECT (1 << 30)
-# define HDMIB_NULL_PACKET (1 << 9)
-#define HDMIB_HDCP_PORT (1 << 5)
+#define HDMIPHYMISCCTL 0x61134
+#define HDMI_PHY_POWER_DOWN 0x7f
+#define HDMIB_CONTROL 0x61140
+#define HDMIB_PORT_EN (1 << 31)
+#define HDMIB_PIPE_B_SELECT (1 << 30)
+#define HDMIB_NULL_PACKET (1 << 9)
+#define HDMIB_HDCP_PORT (1 << 5)
/* #define LVDS 0x61180 */
-# define MRST_PANEL_8TO6_DITHER_ENABLE (1 << 25)
-# define MRST_PANEL_24_DOT_1_FORMAT (1 << 24)
-# define LVDS_A3_POWER_UP_0_OUTPUT (1 << 6)
+#define MRST_PANEL_8TO6_DITHER_ENABLE (1 << 25)
+#define MRST_PANEL_24_DOT_1_FORMAT (1 << 24)
+#define LVDS_A3_POWER_UP_0_OUTPUT (1 << 6)
#define MIPI 0x61190
#define MIPI_C 0x62190
-# define MIPI_PORT_EN (1 << 31)
+#define MIPI_PORT_EN (1 << 31)
/* Turns on border drawing to allow centered display. */
-# define SEL_FLOPPED_HSTX (1 << 23)
-# define PASS_FROM_SPHY_TO_AFE (1 << 16)
-# define MIPI_BORDER_EN (1 << 15)
-# define MIPIA_3LANE_MIPIC_1LANE 0x1
-# define MIPIA_2LANE_MIPIC_2LANE 0x2
-# define TE_TRIGGER_DSI_PROTOCOL (1 << 2)
-# define TE_TRIGGER_GPIO_PIN (1 << 3)
-#define MIPI_TE_COUNT 0x61194
+#define SEL_FLOPPED_HSTX (1 << 23)
+#define PASS_FROM_SPHY_TO_AFE (1 << 16)
+#define MIPI_BORDER_EN (1 << 15)
+#define MIPIA_3LANE_MIPIC_1LANE 0x1
+#define MIPIA_2LANE_MIPIC_2LANE 0x2
+#define TE_TRIGGER_DSI_PROTOCOL (1 << 2)
+#define TE_TRIGGER_GPIO_PIN (1 << 3)
+#define MIPI_TE_COUNT 0x61194
/* #define PP_CONTROL 0x61204 */
-# define POWER_DOWN_ON_RESET (1 << 1)
+#define POWER_DOWN_ON_RESET (1 << 1)
/* #define PFIT_CONTROL 0x61230 */
-# define PFIT_PIPE_SELECT (3 << 29)
-# define PFIT_PIPE_SELECT_SHIFT (29)
+#define PFIT_PIPE_SELECT (3 << 29)
+#define PFIT_PIPE_SELECT_SHIFT (29)
/* #define BLC_PWM_CTL 0x61254 */
-#define MRST_BACKLIGHT_MODULATION_FREQ_SHIFT (16)
-#define MRST_BACKLIGHT_MODULATION_FREQ_MASK (0xffff << 16)
+#define MRST_BACKLIGHT_MODULATION_FREQ_SHIFT (16)
+#define MRST_BACKLIGHT_MODULATION_FREQ_MASK (0xffff << 16)
/* #define PIPEACONF 0x70008 */
-#define PIPEACONF_PIPE_STATE (1<<30)
+#define PIPEACONF_PIPE_STATE (1 << 30)
/* #define DSPACNTR 0x70180 */
#define MRST_DSPABASE 0x7019c
/*
* MIPI IP registers
*/
-#define MIPIC_REG_OFFSET 0x800
-#define DEVICE_READY_REG 0xb000
-#define LP_OUTPUT_HOLD (1 << 16)
-#define EXIT_ULPS_DEV_READY 0x3
-#define LP_OUTPUT_HOLD_RELEASE 0x810000
-# define ENTERING_ULPS (2 << 1)
-# define EXITING_ULPS (1 << 1)
-# define ULPS_MASK (3 << 1)
-# define BUS_POSSESSION (1 << 3)
-#define INTR_STAT_REG 0xb004
-#define RX_SOT_ERROR (1 << 0)
-#define RX_SOT_SYNC_ERROR (1 << 1)
-#define RX_ESCAPE_MODE_ENTRY_ERROR (1 << 3)
-#define RX_LP_TX_SYNC_ERROR (1 << 4)
-#define RX_HS_RECEIVE_TIMEOUT_ERROR (1 << 5)
-#define RX_FALSE_CONTROL_ERROR (1 << 6)
-#define RX_ECC_SINGLE_BIT_ERROR (1 << 7)
-#define RX_ECC_MULTI_BIT_ERROR (1 << 8)
-#define RX_CHECKSUM_ERROR (1 << 9)
-#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 10)
-#define RX_DSI_VC_ID_INVALID (1 << 11)
-#define TX_FALSE_CONTROL_ERROR (1 << 12)
-#define TX_ECC_SINGLE_BIT_ERROR (1 << 13)
-#define TX_ECC_MULTI_BIT_ERROR (1 << 14)
-#define TX_CHECKSUM_ERROR (1 << 15)
-#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 16)
-#define TX_DSI_VC_ID_INVALID (1 << 17)
-#define HIGH_CONTENTION (1 << 18)
-#define LOW_CONTENTION (1 << 19)
-#define DPI_FIFO_UNDER_RUN (1 << 20)
-#define HS_TX_TIMEOUT (1 << 21)
-#define LP_RX_TIMEOUT (1 << 22)
-#define TURN_AROUND_ACK_TIMEOUT (1 << 23)
-#define ACK_WITH_NO_ERROR (1 << 24)
-#define HS_GENERIC_WR_FIFO_FULL (1 << 27)
-#define LP_GENERIC_WR_FIFO_FULL (1 << 28)
-#define SPL_PKT_SENT (1 << 30)
-#define INTR_EN_REG 0xb008
-#define DSI_FUNC_PRG_REG 0xb00c
-#define DPI_CHANNEL_NUMBER_POS 0x03
-#define DBI_CHANNEL_NUMBER_POS 0x05
-#define FMT_DPI_POS 0x07
-#define FMT_DBI_POS 0x0A
-#define DBI_DATA_WIDTH_POS 0x0D
+#define MIPIC_REG_OFFSET 0x800
+
+#define DEVICE_READY_REG 0xb000
+#define LP_OUTPUT_HOLD (1 << 16)
+#define EXIT_ULPS_DEV_READY 0x3
+#define LP_OUTPUT_HOLD_RELEASE 0x810000
+# define ENTERING_ULPS (2 << 1)
+# define EXITING_ULPS (1 << 1)
+# define ULPS_MASK (3 << 1)
+# define BUS_POSSESSION (1 << 3)
+#define INTR_STAT_REG 0xb004
+#define RX_SOT_ERROR (1 << 0)
+#define RX_SOT_SYNC_ERROR (1 << 1)
+#define RX_ESCAPE_MODE_ENTRY_ERROR (1 << 3)
+#define RX_LP_TX_SYNC_ERROR (1 << 4)
+#define RX_HS_RECEIVE_TIMEOUT_ERROR (1 << 5)
+#define RX_FALSE_CONTROL_ERROR (1 << 6)
+#define RX_ECC_SINGLE_BIT_ERROR (1 << 7)
+#define RX_ECC_MULTI_BIT_ERROR (1 << 8)
+#define RX_CHECKSUM_ERROR (1 << 9)
+#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 10)
+#define RX_DSI_VC_ID_INVALID (1 << 11)
+#define TX_FALSE_CONTROL_ERROR (1 << 12)
+#define TX_ECC_SINGLE_BIT_ERROR (1 << 13)
+#define TX_ECC_MULTI_BIT_ERROR (1 << 14)
+#define TX_CHECKSUM_ERROR (1 << 15)
+#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 16)
+#define TX_DSI_VC_ID_INVALID (1 << 17)
+#define HIGH_CONTENTION (1 << 18)
+#define LOW_CONTENTION (1 << 19)
+#define DPI_FIFO_UNDER_RUN (1 << 20)
+#define HS_TX_TIMEOUT (1 << 21)
+#define LP_RX_TIMEOUT (1 << 22)
+#define TURN_AROUND_ACK_TIMEOUT (1 << 23)
+#define ACK_WITH_NO_ERROR (1 << 24)
+#define HS_GENERIC_WR_FIFO_FULL (1 << 27)
+#define LP_GENERIC_WR_FIFO_FULL (1 << 28)
+#define SPL_PKT_SENT (1 << 30)
+#define INTR_EN_REG 0xb008
+#define DSI_FUNC_PRG_REG 0xb00c
+#define DPI_CHANNEL_NUMBER_POS 0x03
+#define DBI_CHANNEL_NUMBER_POS 0x05
+#define FMT_DPI_POS 0x07
+#define FMT_DBI_POS 0x0A
+#define DBI_DATA_WIDTH_POS 0x0D
+
/* DPI PIXEL FORMATS */
-#define RGB_565_FMT 0x01 /* RGB 565 FORMAT */
-#define RGB_666_FMT 0x02 /* RGB 666 FORMAT */
-#define LRGB_666_FMT 0x03 /* RGB LOOSELY PACKED
- * 666 FORMAT
- */
-#define RGB_888_FMT 0x04 /* RGB 888 FORMAT */
-#define VIRTUAL_CHANNEL_NUMBER_0 0x00 /* Virtual channel 0 */
-#define VIRTUAL_CHANNEL_NUMBER_1 0x01 /* Virtual channel 1 */
-#define VIRTUAL_CHANNEL_NUMBER_2 0x02 /* Virtual channel 2 */
-#define VIRTUAL_CHANNEL_NUMBER_3 0x03 /* Virtual channel 3 */
-#define DBI_NOT_SUPPORTED 0x00 /* command mode
- * is not supported
- */
-#define DBI_DATA_WIDTH_16BIT 0x01 /* 16 bit data */
+#define RGB_565_FMT 0x01 /* RGB 565 FORMAT */
+#define RGB_666_FMT 0x02 /* RGB 666 FORMAT */
+#define LRGB_666_FMT 0x03 /* RGB LOOSELY PACKED
+ * 666 FORMAT
+ */
+#define RGB_888_FMT 0x04 /* RGB 888 FORMAT */
+#define VIRTUAL_CHANNEL_NUMBER_0 0x00 /* Virtual channel 0 */
+#define VIRTUAL_CHANNEL_NUMBER_1 0x01 /* Virtual channel 1 */
+#define VIRTUAL_CHANNEL_NUMBER_2 0x02 /* Virtual channel 2 */
+#define VIRTUAL_CHANNEL_NUMBER_3 0x03 /* Virtual channel 3 */
+
+#define DBI_NOT_SUPPORTED 0x00 /* command mode
+ * is not supported
+ */
+#define DBI_DATA_WIDTH_16BIT 0x01 /* 16 bit data */
#define DBI_DATA_WIDTH_9BIT 0x02 /* 9 bit data */
#define DBI_DATA_WIDTH_8BIT 0x03 /* 8 bit data */
-#define DBI_DATA_WIDTH_OPT1 0x04 /* option 1 */
-#define DBI_DATA_WIDTH_OPT2 0x05 /* option 2 */
-#define HS_TX_TIMEOUT_REG 0xb010
-#define LP_RX_TIMEOUT_REG 0xb014
-#define TURN_AROUND_TIMEOUT_REG 0xb018
-#define DEVICE_RESET_REG 0xb01C
-#define DPI_RESOLUTION_REG 0xb020
-#define RES_V_POS 0x10
-#define DBI_RESOLUTION_REG 0xb024 /* Reserved for MDFLD */
-#define HORIZ_SYNC_PAD_COUNT_REG 0xb028
-#define HORIZ_BACK_PORCH_COUNT_REG 0xb02C
-#define HORIZ_FRONT_PORCH_COUNT_REG 0xb030
-#define HORIZ_ACTIVE_AREA_COUNT_REG 0xb034
-#define VERT_SYNC_PAD_COUNT_REG 0xb038
-#define VERT_BACK_PORCH_COUNT_REG 0xb03c
-#define VERT_FRONT_PORCH_COUNT_REG 0xb040
-#define HIGH_LOW_SWITCH_COUNT_REG 0xb044
-#define DPI_CONTROL_REG 0xb048
-#define DPI_SHUT_DOWN (1 << 0)
-#define DPI_TURN_ON (1 << 1)
-#define DPI_COLOR_MODE_ON (1 << 2)
-#define DPI_COLOR_MODE_OFF (1 << 3)
-#define DPI_BACK_LIGHT_ON (1 << 4)
-#define DPI_BACK_LIGHT_OFF (1 << 5)
-#define DPI_LP (1 << 6)
-#define DPI_DATA_REG 0xb04c
-#define DPI_BACK_LIGHT_ON_DATA 0x07
-#define DPI_BACK_LIGHT_OFF_DATA 0x17
-#define INIT_COUNT_REG 0xb050
-#define MAX_RET_PAK_REG 0xb054
-#define VIDEO_FMT_REG 0xb058
-#define COMPLETE_LAST_PCKT (1 << 2)
-#define EOT_DISABLE_REG 0xb05c
-#define ENABLE_CLOCK_STOPPING (1 << 1)
-#define LP_BYTECLK_REG 0xb060
-#define LP_GEN_DATA_REG 0xb064
-#define HS_GEN_DATA_REG 0xb068
-#define LP_GEN_CTRL_REG 0xb06C
-#define HS_GEN_CTRL_REG 0xb070
-#define DCS_CHANNEL_NUMBER_POS 0x06
-#define MCS_COMMANDS_POS 0x8
-#define WORD_COUNTS_POS 0x8
-#define MCS_PARAMETER_POS 0x10
-#define GEN_FIFO_STAT_REG 0xb074
-#define HS_DATA_FIFO_FULL (1 << 0)
-#define HS_DATA_FIFO_HALF_EMPTY (1 << 1)
-#define HS_DATA_FIFO_EMPTY (1 << 2)
-#define LP_DATA_FIFO_FULL (1 << 8)
-#define LP_DATA_FIFO_HALF_EMPTY (1 << 9)
-#define LP_DATA_FIFO_EMPTY (1 << 10)
-#define HS_CTRL_FIFO_FULL (1 << 16)
-#define HS_CTRL_FIFO_HALF_EMPTY (1 << 17)
-#define HS_CTRL_FIFO_EMPTY (1 << 18)
-#define LP_CTRL_FIFO_FULL (1 << 24)
-#define LP_CTRL_FIFO_HALF_EMPTY (1 << 25)
-#define LP_CTRL_FIFO_EMPTY (1 << 26)
-#define DBI_FIFO_EMPTY (1 << 27)
-#define DPI_FIFO_EMPTY (1 << 28)
-#define HS_LS_DBI_ENABLE_REG 0xb078
-#define TXCLKESC_REG 0xb07c
-#define DPHY_PARAM_REG 0xb080
-#define DBI_BW_CTRL_REG 0xb084
-#define CLK_LANE_SWT_REG 0xb088
+#define DBI_DATA_WIDTH_OPT1 0x04 /* option 1 */
+#define DBI_DATA_WIDTH_OPT2 0x05 /* option 2 */
+
+#define HS_TX_TIMEOUT_REG 0xb010
+#define LP_RX_TIMEOUT_REG 0xb014
+#define TURN_AROUND_TIMEOUT_REG 0xb018
+#define DEVICE_RESET_REG 0xb01C
+#define DPI_RESOLUTION_REG 0xb020
+#define RES_V_POS 0x10
+#define DBI_RESOLUTION_REG 0xb024 /* Reserved for MDFLD */
+#define HORIZ_SYNC_PAD_COUNT_REG 0xb028
+#define HORIZ_BACK_PORCH_COUNT_REG 0xb02C
+#define HORIZ_FRONT_PORCH_COUNT_REG 0xb030
+#define HORIZ_ACTIVE_AREA_COUNT_REG 0xb034
+#define VERT_SYNC_PAD_COUNT_REG 0xb038
+#define VERT_BACK_PORCH_COUNT_REG 0xb03c
+#define VERT_FRONT_PORCH_COUNT_REG 0xb040
+#define HIGH_LOW_SWITCH_COUNT_REG 0xb044
+#define DPI_CONTROL_REG 0xb048
+#define DPI_SHUT_DOWN (1 << 0)
+#define DPI_TURN_ON (1 << 1)
+#define DPI_COLOR_MODE_ON (1 << 2)
+#define DPI_COLOR_MODE_OFF (1 << 3)
+#define DPI_BACK_LIGHT_ON (1 << 4)
+#define DPI_BACK_LIGHT_OFF (1 << 5)
+#define DPI_LP (1 << 6)
+#define DPI_DATA_REG 0xb04c
+#define DPI_BACK_LIGHT_ON_DATA 0x07
+#define DPI_BACK_LIGHT_OFF_DATA 0x17
+#define INIT_COUNT_REG 0xb050
+#define MAX_RET_PAK_REG 0xb054
+#define VIDEO_FMT_REG 0xb058
+#define COMPLETE_LAST_PCKT (1 << 2)
+#define EOT_DISABLE_REG 0xb05c
+#define ENABLE_CLOCK_STOPPING (1 << 1)
+#define LP_BYTECLK_REG 0xb060
+#define LP_GEN_DATA_REG 0xb064
+#define HS_GEN_DATA_REG 0xb068
+#define LP_GEN_CTRL_REG 0xb06C
+#define HS_GEN_CTRL_REG 0xb070
+#define DCS_CHANNEL_NUMBER_POS 0x6
+#define MCS_COMMANDS_POS 0x8
+#define WORD_COUNTS_POS 0x8
+#define MCS_PARAMETER_POS 0x10
+#define GEN_FIFO_STAT_REG 0xb074
+#define HS_DATA_FIFO_FULL (1 << 0)
+#define HS_DATA_FIFO_HALF_EMPTY (1 << 1)
+#define HS_DATA_FIFO_EMPTY (1 << 2)
+#define LP_DATA_FIFO_FULL (1 << 8)
+#define LP_DATA_FIFO_HALF_EMPTY (1 << 9)
+#define LP_DATA_FIFO_EMPTY (1 << 10)
+#define HS_CTRL_FIFO_FULL (1 << 16)
+#define HS_CTRL_FIFO_HALF_EMPTY (1 << 17)
+#define HS_CTRL_FIFO_EMPTY (1 << 18)
+#define LP_CTRL_FIFO_FULL (1 << 24)
+#define LP_CTRL_FIFO_HALF_EMPTY (1 << 25)
+#define LP_CTRL_FIFO_EMPTY (1 << 26)
+#define DBI_FIFO_EMPTY (1 << 27)
+#define DPI_FIFO_EMPTY (1 << 28)
+#define HS_LS_DBI_ENABLE_REG 0xb078
+#define TXCLKESC_REG 0xb07c
+#define DPHY_PARAM_REG 0xb080
+#define DBI_BW_CTRL_REG 0xb084
+#define CLK_LANE_SWT_REG 0xb088
/*
* MIPI Adapter registers
*/
-#define MIPI_CONTROL_REG 0xb104
-#define MIPI_2X_CLOCK_BITS ((1 << 0) | (1 << 1))
-#define MIPI_DATA_ADDRESS_REG 0xb108
-#define MIPI_DATA_LENGTH_REG 0xb10C
-#define MIPI_COMMAND_ADDRESS_REG 0xb110
-#define MIPI_COMMAND_LENGTH_REG 0xb114
-#define MIPI_READ_DATA_RETURN_REG0 0xb118
-#define MIPI_READ_DATA_RETURN_REG1 0xb11C
-#define MIPI_READ_DATA_RETURN_REG2 0xb120
-#define MIPI_READ_DATA_RETURN_REG3 0xb124
-#define MIPI_READ_DATA_RETURN_REG4 0xb128
-#define MIPI_READ_DATA_RETURN_REG5 0xb12C
-#define MIPI_READ_DATA_RETURN_REG6 0xb130
-#define MIPI_READ_DATA_RETURN_REG7 0xb134
-#define MIPI_READ_DATA_VALID_REG 0xb138
+#define MIPI_CONTROL_REG 0xb104
+#define MIPI_2X_CLOCK_BITS ((1 << 0) | (1 << 1))
+#define MIPI_DATA_ADDRESS_REG 0xb108
+#define MIPI_DATA_LENGTH_REG 0xb10C
+#define MIPI_COMMAND_ADDRESS_REG 0xb110
+#define MIPI_COMMAND_LENGTH_REG 0xb114
+#define MIPI_READ_DATA_RETURN_REG0 0xb118
+#define MIPI_READ_DATA_RETURN_REG1 0xb11C
+#define MIPI_READ_DATA_RETURN_REG2 0xb120
+#define MIPI_READ_DATA_RETURN_REG3 0xb124
+#define MIPI_READ_DATA_RETURN_REG4 0xb128
+#define MIPI_READ_DATA_RETURN_REG5 0xb12C
+#define MIPI_READ_DATA_RETURN_REG6 0xb130
+#define MIPI_READ_DATA_RETURN_REG7 0xb134
+#define MIPI_READ_DATA_VALID_REG 0xb138
+
/* DBI COMMANDS */
-#define soft_reset 0x01
+#define soft_reset 0x01
/*
* The display module performs a software reset.
* Registers are written with their SW Reset default values.
*/
-#define get_power_mode 0x0a
+#define get_power_mode 0x0a
/*
* The display module returns the current power mode
*/
-#define get_address_mode 0x0b
+#define get_address_mode 0x0b
/*
* The display module returns the current status.
*/
-#define get_pixel_format 0x0c
+#define get_pixel_format 0x0c
/*
* This command gets the pixel format for the RGB image data
* used by the interface.
*/
-#define get_display_mode 0x0d
+#define get_display_mode 0x0d
/*
* The display module returns the Display Image Mode status.
*/
-#define get_signal_mode 0x0e
+#define get_signal_mode 0x0e
/*
* The display module returns the Display Signal Mode.
*/
-#define get_diagnostic_result 0x0f
+#define get_diagnostic_result 0x0f
/*
* The display module returns the self-diagnostic results following
* a Sleep Out command.
*/
-#define enter_sleep_mode 0x10
+#define enter_sleep_mode 0x10
/*
* This command causes the display module to enter the Sleep mode.
* In this mode, all unnecessary blocks inside the display module are
* disabled except interface communication. This is the lowest power
* mode the display module supports.
*/
-#define exit_sleep_mode 0x11
+#define exit_sleep_mode 0x11
/*
* This command causes the display module to exit Sleep mode.
* All blocks inside the display module are enabled.
*/
-#define enter_partial_mode 0x12
+#define enter_partial_mode 0x12
/*
* This command causes the display module to enter the Partial Display
* Mode. The Partial Display Mode window is described by the
* set_partial_area command.
*/
-#define enter_normal_mode 0x13
+#define enter_normal_mode 0x13
/*
* This command causes the display module to enter the Normal mode.
* Normal Mode is defined as Partial Display mode and Scroll mode are off
*/
-#define exit_invert_mode 0x20
+#define exit_invert_mode 0x20
/*
* This command causes the display module to stop inverting the image
* data on the display device. The frame memory contents remain unchanged.
* No status bits are changed.
*/
-#define enter_invert_mode 0x21
+#define enter_invert_mode 0x21
/*
* This command causes the display module to invert the image data only on
* the display device. The frame memory contents remain unchanged.
* No status bits are changed.
*/
-#define set_gamma_curve 0x26
+#define set_gamma_curve 0x26
/*
* This command selects the desired gamma curve for the display device.
* Four fixed gamma curves are defined in section DCS spec.
*/
-#define set_display_off 0x28
+#define set_display_off 0x28
/* ************************************************************************* *\
This command causes the display module to stop displaying the image data
on the display device. The frame memory contents remain unchanged.
No status bits are changed.
\* ************************************************************************* */
-#define set_display_on 0x29
+#define set_display_on 0x29
/* ************************************************************************* *\
This command causes the display module to start displaying the image data
on the display device. The frame memory contents remain unchanged.
No status bits are changed.
\* ************************************************************************* */
-#define set_column_address 0x2a
+#define set_column_address 0x2a
/*
* This command defines the column extent of the frame memory accessed by
* the hostprocessor with the read_memory_continue and
* write_memory_continue commands.
* No status bits are changed.
*/
-#define set_page_addr 0x2b
+#define set_page_addr 0x2b
/*
* This command defines the page extent of the frame memory accessed by
* the host processor with the write_memory_continue and
- * read_memory_continue command.
+ * read_memory_continue command.
* No status bits are changed.
*/
-#define write_mem_start 0x2c
+#define write_mem_start 0x2c
/*
* This command transfers image data from the host processor to the
- * display module s frame memory starting at the pixel location specified
+ * display modules frame memory starting at the pixel location specified
* by preceding set_column_address and set_page_address commands.
*/
-#define set_partial_area 0x30
+#define set_partial_area 0x30
/*
* This command defines the Partial Display mode s display area.
* There are two parameters associated with this command, the first
* defines the Start Row (SR) and the second the End Row (ER). SR and ER
* refer to the Frame Memory Line Pointer.
*/
-#define set_scroll_area 0x33
+#define set_scroll_area 0x33
/*
* This command defines the display modules Vertical Scrolling Area.
*/
-#define set_tear_off 0x34
+#define set_tear_off 0x34
/*
* This command turns off the display modules Tearing Effect output
* signal on the TE signal line.
*/
-#define set_tear_on 0x35
+#define set_tear_on 0x35
/*
* This command turns on the display modules Tearing Effect output signal
* on the TE signal line.
*/
-#define set_address_mode 0x36
+#define set_address_mode 0x36
/*
* This command sets the data order for transfers from the host processor
* to display modules frame memory,bits B[7:5] and B3, and from the
* display modules frame memory to the display device, bits B[2:0] and B4.
*/
-#define set_scroll_start 0x37
+#define set_scroll_start 0x37
/*
* This command sets the start of the vertical scrolling area in the frame
* memory. The vertical scrolling area is fully defined when this command
* line in the frame memory that is written to the display device as the
* first line of the vertical scroll area.
*/
-#define exit_idle_mode 0x38
+#define exit_idle_mode 0x38
/*
* This command causes the display module to exit Idle mode.
*/
-#define enter_idle_mode 0x39
+#define enter_idle_mode 0x39
/*
* This command causes the display module to enter Idle Mode.
* In Idle Mode, color expression is reduced. Colors are shown on the
* display device using the MSB of each of the R, G and B color
* components in the frame memory
*/
-#define set_pixel_format 0x3a
+#define set_pixel_format 0x3a
/*
* This command sets the pixel format for the RGB image data used by the
* interface.
* Bits D[2:0] DBI Pixel Format Definition
* Bits D7 and D3 are not used.
*/
- #define DCS_PIXEL_FORMAT_3bbp 0x1
- #define DCS_PIXEL_FORMAT_8bbp 0x2
- #define DCS_PIXEL_FORMAT_12bbp 0x3
- #define DCS_PIXEL_FORMAT_16bbp 0x5
- #define DCS_PIXEL_FORMAT_18bbp 0x6
- #define DCS_PIXEL_FORMAT_24bbp 0x7
-#define write_mem_cont 0x3c
+#define DCS_PIXEL_FORMAT_3bpp 0x1
+#define DCS_PIXEL_FORMAT_8bpp 0x2
+#define DCS_PIXEL_FORMAT_12bpp 0x3
+#define DCS_PIXEL_FORMAT_16bpp 0x5
+#define DCS_PIXEL_FORMAT_18bpp 0x6
+#define DCS_PIXEL_FORMAT_24bpp 0x7
+
+#define write_mem_cont 0x3c
+
/*
* This command transfers image data from the host processor to the
* display module's frame memory continuing from the pixel location
* following the previous write_memory_continue or write_memory_start
* command.
*/
-#define set_tear_scanline 0x44
+#define set_tear_scanline 0x44
/*
* This command turns on the display modules Tearing Effect output signal
* on the TE signal line when the display module reaches line N.
*/
-#define get_scanline 0x45
+#define get_scanline 0x45
/*
* The display module returns the current scanline, N, used to update the
* display device. The total number of scanlines on a display device is
#define GAMMA_AUTO (1 << 0)
/* DCS Interface Pixel Formats */
-#define DCS_PIXEL_FORMAT_3BPP 0x1
-#define DCS_PIXEL_FORMAT_8BPP 0x2
-#define DCS_PIXEL_FORMAT_12BPP 0x3
-#define DCS_PIXEL_FORMAT_16BPP 0x5
-#define DCS_PIXEL_FORMAT_18BPP 0x6
-#define DCS_PIXEL_FORMAT_24BPP 0x7
+#define DCS_PIXEL_FORMAT_3BPP 0x1
+#define DCS_PIXEL_FORMAT_8BPP 0x2
+#define DCS_PIXEL_FORMAT_12BPP 0x3
+#define DCS_PIXEL_FORMAT_16BPP 0x5
+#define DCS_PIXEL_FORMAT_18BPP 0x6
+#define DCS_PIXEL_FORMAT_24BPP 0x7
/* ONE PARAMETER READ DATA */
-#define addr_mode_data 0xfc
-#define diag_res_data 0x00
-#define disp_mode_data 0x23
-#define pxl_fmt_data 0x77
-#define pwr_mode_data 0x74
-#define sig_mode_data 0x00
+#define addr_mode_data 0xfc
+#define diag_res_data 0x00
+#define disp_mode_data 0x23
+#define pxl_fmt_data 0x77
+#define pwr_mode_data 0x74
+#define sig_mode_data 0x00
/* TWO PARAMETERS READ DATA */
-#define scanline_data1 0xff
-#define scanline_data2 0xff
+#define scanline_data1 0xff
+#define scanline_data2 0xff
#define NON_BURST_MODE_SYNC_PULSE 0x01 /* Non Burst Mode
* with Sync Pulse
*/
* with Sync events
*/
#define BURST_MODE 0x03 /* Burst Mode */
-#define DBI_COMMAND_BUFFER_SIZE 0x240 /* 0x32 */ /* 0x120 */ /* Allocate at least
+#define DBI_COMMAND_BUFFER_SIZE 0x240 /* 0x32 */ /* 0x120 */
+ /* Allocate at least
* 0x100 Byte with 32
* byte alignment
*/
* 0x100 Byte with 32
* byte alignment
*/
-#define DBI_CB_TIME_OUT 0xFFFF
-
-#define GEN_FB_TIME_OUT 2000
-#define ALIGNMENT_32BYTE_MASK (~((1 << 0)|(1 << 1)|(1 << 2)|(1 << 3)|(1 << 4)))
-#define SKU_83 0x01
-#define SKU_100 0x02
-#define SKU_100L 0x04
-#define SKU_BYPASS 0x08
+#define DBI_CB_TIME_OUT 0xFFFF
+
+#define GEN_FB_TIME_OUT 2000
+
+#define SKU_83 0x01
+#define SKU_100 0x02
+#define SKU_100L 0x04
+#define SKU_BYPASS 0x08
#endif
git.openpandora.org / pandora-kernel.git / blobdiff