Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
+----------------------------------------------------------------------------+
*/
#include "hwdrv_apci035.h"
-INT i_WatchdogNbr = 0;
-INT i_Temp = 0;
-INT i_Flag = 1;
+int i_WatchdogNbr = 0;
+int i_Temp = 0;
+int i_Flag = 1;
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI035_ConfigTimerWatchdog |
| Task : Configures The Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
-| UINT *data : Data Pointer contains |
+| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 Configure As Timer |
| 1 Configure As Watchdog |
- data[1] : Watchdog number
+| data[1] : Watchdog number
| data[2] : Time base Unit |
| data[3] : Reload Value |
- data[4] : External Trigger |
- 1:Enable
- 0:Disable
- data[5] :External Trigger Level
- 00 Trigger Disabled
- 01 Trigger Enabled (Low level)
- 10 Trigger Enabled (High Level)
- 11 Trigger Enabled (High/Low level)
- data[6] : External Gate |
- 1:Enable
- 0:Disable
- data[7] : External Gate level
- 00 Gate Disabled
- 01 Gate Enabled (Low level)
- 10 Gate Enabled (High Level)
- data[8] :Warning Relay
- 1: ENABLE
- 0: DISABLE
- data[9] :Warning Delay available
- data[10] :Warning Relay Time unit
- data[11] :Warning Relay Time Reload value
- data[12] :Reset Relay
- 1 : ENABLE
- 0 : DISABLE
- data[13] :Interrupt
- 1 : ENABLE
- 0 : DISABLE
-
+| data[4] : External Trigger |
+| 1:Enable
+| 0:Disable
+| data[5] :External Trigger Level
+| 00 Trigger Disabled
+| 01 Trigger Enabled (Low level)
+| 10 Trigger Enabled (High Level)
+| 11 Trigger Enabled (High/Low level)
+| data[6] : External Gate |
+| 1:Enable
+| 0:Disable
+| data[7] : External Gate level
+| 00 Gate Disabled
+| 01 Gate Enabled (Low level)
+| 10 Gate Enabled (High Level)
+| data[8] :Warning Relay
+| 1: ENABLE
+| 0: DISABLE
+| data[9] :Warning Delay available
+| data[10] :Warning Relay Time unit
+| data[11] :Warning Relay Time Reload value
+| data[12] :Reset Relay
+| 1 : ENABLE
+| 0 : DISABLE
+| data[13] :Interrupt
+| 1 : ENABLE
+| 0 : DISABLE
+|
|
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| |
+----------------------------------------------------------------------------+
*/
-INT i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
- struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
- UINT ui_Status = 0;
- UINT ui_Command = 0;
- UINT ui_Mode = 0;
+ unsigned int ui_Status = 0;
+ unsigned int ui_Command = 0;
+ unsigned int ui_Mode = 0;
i_Temp = 0;
devpriv->tsk_Current = current;
devpriv->b_TimerSelectMode = data[0];
} else {
ui_Mode = 0;
}
-//ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
+/* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12); */
ui_Command = 0;
-//ui_Command = ui_Command & 0xFFFFF9FEUL;
+/* ui_Command = ui_Command & 0xFFFFF9FEUL; */
outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command =
(ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL;
- } //if (data[0] == ADDIDATA_TIMER)
+ } /* if (data[0] == ADDIDATA_TIMER) */
else {
if (data[0] == ADDIDATA_WATCHDOG) {
| Task : Start / Stop The Selected Timer , or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
-| UINT *data : Data Pointer contains |
+| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 - Stop Selected Timer/Watchdog |
| |
+----------------------------------------------------------------------------+
*/
-INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
- struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
+ struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
{
- UINT ui_Command = 0;
- INT i_Count = 0;
+ unsigned int ui_Command = 0;
+ int i_Count = 0;
if (data[0] == 1) {
ui_Command =
inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x1UL;
outl(ui_Command,
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- } // if (data[0]==1)
+ } /* if (data[0]==1) */
if (data[0] == 2) {
ui_Command =
inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
}
- if (data[0] == 0) //Stop The Watchdog
+ if (data[0] == 0) /* Stop The Watchdog */
{
- //Stop The Watchdog
+ /* Stop The Watchdog */
ui_Command = 0;
- //ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
- //ui_Command = ui_Command & 0xFFFFF9FEUL;
+/*
+* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
+* ui_Command = ui_Command & 0xFFFFF9FEUL;
+*/
outl(ui_Command,
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- } // if (data[1]==0)
- if (data[0] == 3) //stop all Watchdogs
+ } /* if (data[1]==0) */
+ if (data[0] == 3) /* stop all Watchdogs */
{
ui_Command = 0;
for (i_Count = 1; i_Count <= 4; i_Count++) {
}
}
- if (data[0] == 4) //start all Watchdogs
+ if (data[0] == 4) /* start all Watchdogs */
{
ui_Command = 0;
for (i_Count = 1; i_Count <= 4; i_Count++) {
0);
}
}
- if (data[0] == 5) //trigger all Watchdogs
+ if (data[0] == 5) /* trigger all Watchdogs */
{
ui_Command = 0;
for (i_Count = 1; i_Count <= 4; i_Count++) {
| Task : Read The Selected Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
-| UINT *data : Data Pointer contains |
+| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| |
+----------------------------------------------------------------------------+
| Output Parameters : data[0] : software trigger status
- data[1] : hardware trigger status
-| data[2] : Software clear status
- data[3] : Overflow status
- data[4] : Timer actual value
-
+| data[1] : hardware trigger status
+| data[2] : Software clear status
+| data[3] : Overflow status
+| data[4] : Timer actual value
+|
+----------------------------------------------------------------------------+
| Return Value : TRUE : No error occur |
| |
+----------------------------------------------------------------------------+
*/
-INT i_APCI035_ReadTimerWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
- struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ReadTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
- UINT ui_Status = 0; // Status register
+ unsigned int ui_Status = 0; /* Status register */
i_WatchdogNbr = insn->unused[0];
- /******************/
+
+ /******************/
/* Get the status */
- /******************/
+ /******************/
+
ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16);
- /***********************************/
+
+ /***********************************/
/* Get the software trigger status */
- /***********************************/
+ /***********************************/
+
data[0] = ((ui_Status >> 1) & 1);
- /***********************************/
+ /***********************************/
/* Get the hardware trigger status */
- /***********************************/
+ /***********************************/
data[1] = ((ui_Status >> 2) & 1);
- /*********************************/
+ /*********************************/
/* Get the software clear status */
- /*********************************/
+ /*********************************/
data[2] = ((ui_Status >> 3) & 1);
- /***************************/
+ /***************************/
/* Get the overflow status */
- /***************************/
+ /***************************/
data[3] = ((ui_Status >> 0) & 1);
if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) {
data[4] = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0);
- } // if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER)
+ } /* if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) */
return insn->n;
}
/*
+----------------------------------------------------------------------------+
-| Function Name : INT i_APCI035_ConfigAnalogInput |
+| Function Name : int i_APCI035_ConfigAnalogInput |
| (struct comedi_device *dev,struct comedi_subdevice *s, |
| struct comedi_insn *insn,unsigned int *data) |
+----------------------------------------------------------------------------+
| |
+----------------------------------------------------------------------------+
*/
-INT i_APCI035_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
- struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
devpriv->tsk_Current = current;
outl(0x200 | 0, devpriv->iobase + 128 + 0x4);
| Task : Read value of the selected channel |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
-| UINT ui_NoOfChannels : No Of Channels To read |
-| UINT *data : Data Pointer to read status |
+| unsigned int ui_NoOfChannels : No Of Channels To read |
+| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : Digital Value Of Input |
| |
+----------------------------------------------------------------------------+
*/
-INT i_APCI035_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
- struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
- UINT ui_CommandRegister = 0;
+ unsigned int ui_CommandRegister = 0;
/******************/
/* Set the start */
/******************/
| |
+----------------------------------------------------------------------------+
*/
-INT i_APCI035_Reset(struct comedi_device * dev)
+int i_APCI035_Reset(struct comedi_device *dev)
{
- INT i_Count = 0;
+ int i_Count = 0;
for (i_Count = 1; i_Count <= 4; i_Count++) {
i_WatchdogNbr = i_Count;
- outl(0x0, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0); //stop all timers
+ outl(0x0, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0); /* stop all timers */
}
- outl(0x0, devpriv->iobase + 128 + 12); //Disable the warning delay
+ outl(0x0, devpriv->iobase + 128 + 12); /* Disable the warning delay */
return 0;
}
static void v_APCI035_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
- UINT ui_StatusRegister1 = 0;
- UINT ui_StatusRegister2 = 0;
- UINT ui_ReadCommand = 0;
- UINT ui_ChannelNumber = 0;
- UINT ui_DigitalTemperature = 0;
+ unsigned int ui_StatusRegister1 = 0;
+ unsigned int ui_StatusRegister2 = 0;
+ unsigned int ui_ReadCommand = 0;
+ unsigned int ui_ChannelNumber = 0;
+ unsigned int ui_DigitalTemperature = 0;
if (i_Temp == 1) {
i_WatchdogNbr = i_Flag;
i_Flag = i_Flag + 1;
ui_StatusRegister2 =
inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 20);
- if ((((ui_StatusRegister1) & 0x8) == 0x8)) //Test if warning relay interrupt
+ if ((((ui_StatusRegister1) & 0x8) == 0x8)) /* Test if warning relay interrupt */
{
/**********************************/
/* Disable the temperature warning */
/* Read the digital temperature value */
/**************************************/
ui_DigitalTemperature = inl(devpriv->iobase + 128 + 60);
- send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample
- } //if (((ui_StatusRegister1 & 0x8) == 0x8))
+ send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
+ } /* if (((ui_StatusRegister1 & 0x8) == 0x8)) */
else {
if ((ui_StatusRegister2 & 0x1) == 0x1) {
- send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample
+ send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
}
- } //else if (((ui_StatusRegister1 & 0x8) == 0x8))
+ } /* else if (((ui_StatusRegister1 & 0x8) == 0x8)) */
return;
}
git.openpandora.org / pandora-kernel.git / blobdiff