/*
+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_InitTorCounter |
-| (BYTE_ b_BoardHandle, |
-| BYTE_ b_ModulNbr, |
-| BYTE_ b_TorCounter, |
-| BYTE_ b_PCIInputClock, |
-| BYTE_ b_TimingUnit, |
+| (unsigned char_ b_BoardHandle, |
+| unsigned char_ b_ModulNbr, |
+| unsigned char_ b_TorCounter, |
+| unsigned char_ b_PCIInputClock, |
+| unsigned char_ b_TimingUnit, |
| ULONG_ ul_TimingInterval, |
| PULONG_ pul_RealTimingInterval) |
+----------------------------------------------------------------------------+
+----------------------------------------------------------------------------+
| Input Parameters : |
|
- CR_AREF BYTE_ b_ModulNbr : Module number to configure |
+ CR_AREF unsigned char_ b_ModulNbr : Module number to configure |
| (0 to 3) |
-| data[0] BYTE_ b_TorCounter : Tor counter selection |
+| data[0] unsigned char_ b_TorCounter : Tor counter selection |
| (0 or 1). |
-| data[1] BYTE_ b_PCIInputClock : Selection from PCI bus clock|
+| data[1] unsigned char_ b_PCIInputClock : Selection from PCI bus clock|
| - APCI1710_30MHZ : |
| The PC have a PCI bus |
| clock from 30 MHz |
| than it is not possibl to |
| used the gate input for |
| enabled the acquisition |
-| data[2] BYTE_ b_TimingUnit : Base timing unit (0 to 4) |
+| data[2] unsigned char_ b_TimingUnit : Base timing unit (0 to 4) |
| 0 : ns |
| 1 : µs |
| 2 : ms |
+----------------------------------------------------------------------------+
*/
-INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
+int i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
{
- INT i_ReturnValue = 0;
- ULONG ul_TimerValue = 0;
- DWORD dw_Command;
+ int i_ReturnValue = 0;
+ unsigned int ul_TimerValue = 0;
+ unsigned int dw_Command;
double d_RealTimingInterval = 0;
- BYTE b_ModulNbr;
- BYTE b_TorCounter;
- BYTE b_PCIInputClock;
- BYTE b_TimingUnit;
- ULONG ul_TimingInterval;
- ULONG ul_RealTimingInterval = 0;
+ unsigned char b_ModulNbr;
+ unsigned char b_TorCounter;
+ unsigned char b_PCIInputClock;
+ unsigned char b_TimingUnit;
+ unsigned int ul_TimingInterval;
+ unsigned int ul_RealTimingInterval = 0;
i_ReturnValue = insn->n;
- b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
+ b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
- b_TorCounter = (BYTE) data[0];
- b_PCIInputClock = (BYTE) data[1];
- b_TimingUnit = (BYTE) data[2];
- ul_TimingInterval = (ULONG) data[3];
+ b_TorCounter = (unsigned char) data[0];
+ b_PCIInputClock = (unsigned char) data[1];
+ b_TimingUnit = (unsigned char) data[2];
+ ul_TimingInterval = (unsigned int) data[3];
printk("INPUT clock %d\n", b_PCIInputClock);
/**************************/
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(ul_TimingInterval
*
(0.00025 * b_PCIInputClock));
ul_RealTimingInterval
=
- (ULONG)
+ (unsigned int)
(ul_TimerValue
/
(0.00025 * (double)b_PCIInputClock));
if (b_PCIInputClock != APCI1710_40MHZ) {
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(
(double)
(ul_TimerValue)
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(ul_TimingInterval
*
(0.25 * b_PCIInputClock));
ul_RealTimingInterval
=
- (ULONG)
+ (unsigned int)
(ul_TimerValue
/
(0.25 * (double)b_PCIInputClock));
if (b_PCIInputClock != APCI1710_40MHZ) {
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(
(double)
(ul_TimerValue)
ul_RealTimingInterval
=
- (ULONG)
+ (unsigned int)
(ul_TimerValue
/
(250.0 * (double)b_PCIInputClock));
if (b_PCIInputClock != APCI1710_40MHZ) {
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(
(double)
(ul_TimerValue)
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(ul_TimingInterval
*
(250000.0
ul_RealTimingInterval
=
- (ULONG)
+ (unsigned int)
(ul_TimerValue
/
(250000.0
if (b_PCIInputClock != APCI1710_40MHZ) {
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(
(double)
(ul_TimerValue)
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(
(ul_TimingInterval
*
ul_RealTimingInterval
=
- (ULONG)
+ (unsigned int)
(ul_TimerValue
/
(250000.0
if (b_PCIInputClock != APCI1710_40MHZ) {
ul_TimerValue
=
- (ULONG)
+ (unsigned int)
(
(double)
(ul_TimerValue)
}
fpu_end();
- } // if (b_PCIInputClock != APCI1710_GATE_INPUT)
+ } /* if (b_PCIInputClock != APCI1710_GATE_INPUT) */
else {
/*************************************************************/
/* 2 Clock used for the overflow and the reload from counter */
ul_TimingInterval
-
2;
- } // if (b_PCIInputClock != APCI1710_GATE_INPUT)
+ } /* if (b_PCIInputClock != APCI1710_GATE_INPUT) */
/****************************/
/* Save the PCI input clock */
DPRINTK("Base timing selection is wrong\n");
i_ReturnValue = -7;
}
- } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
+ } /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
else {
/**********************************/
/* Timing unit selection is wrong */
DPRINTK("Timing unit selection is wrong\n");
i_ReturnValue = -6;
- } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
- } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ))
+ } /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
+ } /* if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) */
else {
/*****************************************/
/* The selected PCI input clock is wrong */
DPRINTK("The selected PCI input clock is wrong\n");
i_ReturnValue = -5;
- } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ))
- } // if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7)
+ } /* if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) */
+ } /* if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7) */
else {
/**********************************/
/* Tor Counter selection is wrong */
DPRINTK("Tor Counter selection is wrong\n");
i_ReturnValue = -4;
- } // if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7)
+ } /* if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7) */
} else {
/******************************************/
/* The module is not a tor counter module */
DPRINTK("Module number error\n");
i_ReturnValue = -2;
}
- data[0] = (UINT) ul_RealTimingInterval;
+ data[0] = (unsigned int) ul_RealTimingInterval;
return (i_ReturnValue);
}
/*
+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_EnableTorCounter |
-| (BYTE_ b_BoardHandle, |
-| BYTE_ b_ModulNbr, |
-| BYTE_ b_TorCounter, |
-| BYTE_ b_InputMode, |
-| BYTE_ b_ExternGate, |
-| BYTE_ b_CycleMode, |
-| BYTE_ b_InterruptEnable) |
+| (unsigned char_ b_BoardHandle, |
+| unsigned char_ b_ModulNbr, |
+| unsigned char_ b_TorCounter, |
+| unsigned char_ b_InputMode, |
+| unsigned char_ b_ExternGate, |
+| unsigned char_ b_CycleMode, |
+| unsigned char_ b_InterruptEnable) |
+----------------------------------------------------------------------------+
| Task : Enable the tor counter (b_TorCounter) from selected |
| module (b_ModulNbr). You must calling the |
| The b_CycleMode parameter determine if you will |
| measured a single or more cycle. |
+----------------------------------------------------------------------------+
-| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 |
-| BYTE_ b_ModulNbr : Selected module number (0 to 3) |
-| BYTE_ b_TorCounter : Tor counter selection (0 or 1). |
-| BYTE_ b_InputMode : Input signal level selection |
+| Input Parameters : unsigned char_ b_BoardHandle : Handle of board APCI-1710 |
+| unsigned char_ b_ModulNbr : Selected module number (0 to 3) |
+| unsigned char_ b_TorCounter : Tor counter selection (0 or 1). |
+| unsigned char_ b_InputMode : Input signal level selection |
| 0 : Tor count each low level |
| 1 : Tor count each high level|
-| BYTE_ b_ExternGate : Extern gate action selection |
+| unsigned char_ b_ExternGate : Extern gate action selection |
| 0 : Extern gate signal not |
| used |
| 1 : Extern gate signal used. |
| The gate input is used for the |
| signal B |
| |
-| BYTE_ b_CycleMode : Selected the tor counter |
+| unsigned char_ b_CycleMode : Selected the tor counter |
| acquisition mode |
-| BYTE_ b_InterruptEnable : Enable or disable the |
+| unsigned char_ b_InterruptEnable : Enable or disable the |
| tor counter interrupt. |
| APCI1710_ENABLE: |
| Enable the tor counter |
/*
+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_DisableTorCounter |
-| (BYTE_ b_BoardHandle, |
-| BYTE_ b_ModulNbr, |
-| BYTE_ b_TorCounter) |
+| (unsigned char_ b_BoardHandle, |
+| unsigned char_ b_ModulNbr, |
+| unsigned char_ b_TorCounter) |
+----------------------------------------------------------------------------+
| Task : Disable the tor counter (b_TorCounter) from selected |
| module (b_ModulNbr). If you disable the tor counter |
| counter witch the " i_APCI1710_EnableTorCounter" |
| function, the status register is cleared |
+----------------------------------------------------------------------------+
-| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 |
-| BYTE_ b_ModulNbr : Selected module number (0 to 3) |
-| BYTE_ b_TorCounter : Tor counter selection (0 or 1). |
+| Input Parameters : unsigned char_ b_BoardHandle : Handle of board APCI-1710 |
+| unsigned char_ b_ModulNbr : Selected module number (0 to 3) |
+| unsigned char_ b_TorCounter : Tor counter selection (0 or 1). |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
+----------------------------------------------------------------------------+
*/
-INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
+int i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
{
- INT i_ReturnValue = 0;
- DWORD dw_Status;
- DWORD dw_DummyRead;
- DWORD dw_ConfigReg;
- BYTE b_ModulNbr, b_Action;
- BYTE b_TorCounter;
- BYTE b_InputMode;
- BYTE b_ExternGate;
- BYTE b_CycleMode;
- BYTE b_InterruptEnable;
-
- b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
- b_Action = (BYTE) data[0]; // enable or disable
- b_TorCounter = (BYTE) data[1];
- b_InputMode = (BYTE) data[2];
- b_ExternGate = (BYTE) data[3];
- b_CycleMode = (BYTE) data[4];
- b_InterruptEnable = (BYTE) data[5];
+ int i_ReturnValue = 0;
+ unsigned int dw_Status;
+ unsigned int dw_DummyRead;
+ unsigned int dw_ConfigReg;
+ unsigned char b_ModulNbr, b_Action;
+ unsigned char b_TorCounter;
+ unsigned char b_InputMode;
+ unsigned char b_ExternGate;
+ unsigned char b_CycleMode;
+ unsigned char b_InterruptEnable;
+
+ b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+ b_Action = (unsigned char) data[0]; /* enable or disable */
+ b_TorCounter = (unsigned char) data[1];
+ b_InputMode = (unsigned char) data[2];
+ b_ExternGate = (unsigned char) data[3];
+ b_CycleMode = (unsigned char) data[4];
+ b_InterruptEnable = (unsigned char) data[5];
i_ReturnValue = insn->n;;
- devpriv->tsk_Current = current; // Save the current process task structure
+ devpriv->tsk_Current = current; /* Save the current process task structure */
/**************************/
/* Test the module number */
/**************************/
/**********************************/
if (b_TorCounter <= 1) {
- switch (b_Action) // Enable or Disable
+ switch (b_Action) /* Enable or Disable */
{
case APCI1710_ENABLE:
/***********************************/
|
0x780;
- } // if (b_InputMode == APCI1710_TOR_SIMPLE_MODE)
+ } /* if (b_InputMode == APCI1710_TOR_SIMPLE_MODE) */
/***********************/
/* Test if double mode */
|
0x180;
- } // if (b_InputMode == APCI1710_TOR_DOUBLE_MODE)
+ } /* if (b_InputMode == APCI1710_TOR_DOUBLE_MODE) */
b_InputMode
=
0;
- } // if (b_InputMode > 1)
+ } /* if (b_InputMode > 1) */
/*******************/
/* Set the command */
outl(1, devpriv->s_BoardInfos.ui_Address + 8 + (16 * b_TorCounter) + (64 * b_ModulNbr));
- } // if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE))
+ } /* if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) */
else {
/********************************/
/* Interrupt parameter is wrong */
i_ReturnValue
=
-9;
- } // if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE))
- } // if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS))
+ } /* if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) */
+ } /* if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) */
else {
/***********************************************/
/* Tor counter acquisition mode cycle is wrong */
i_ReturnValue
=
-8;
- } // if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS))
- } // if (b_ExternGate >= 0 && b_ExternGate <= 1)
+ } /* if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) */
+ } /* if (b_ExternGate >= 0 && b_ExternGate <= 1) */
else {
/***********************************/
/* Extern gate input mode is wrong */
DPRINTK("Extern gate input mode is wrong\n");
i_ReturnValue =
-7;
- } // if (b_ExternGate >= 0 && b_ExternGate <= 1)
- } // if (b_InputMode >= 0 && b_InputMode <= 1)
+ } /* if (b_ExternGate >= 0 && b_ExternGate <= 1) */
+ } /* if (b_InputMode >= 0 && b_InputMode <= 1) */
else {
/***************************************/
/* Tor input signal selection is wrong */
s_BoardInfos.
ui_Address + 8 +
(16 * b_TorCounter) + (64 * b_ModulNbr));
- } // if (dw_Status & 0x1)
+ } /* if (dw_Status & 0x1) */
else {
/***************************/
/* Tor counter not enabled */
DPRINTK("Tor counter not enabled \n");
i_ReturnValue = -6;
- } // if (dw_Status & 0x1)
- } // if (dw_Status & 0x10)
+ } /* if (dw_Status & 0x1) */
+ } /* if (dw_Status & 0x10) */
else {
/*******************************/
/* Tor counter not initialised */
DPRINTK("Tor counter not initialised\n");
i_ReturnValue = -5;
- } // // if (dw_Status & 0x10)
+ } /* // if (dw_Status & 0x10) */
- } // switch
- } // if (b_TorCounter <= 1)
+ } /* switch */
+ } /* if (b_TorCounter <= 1) */
else {
/**********************************/
/* Tor counter selection is wrong */
DPRINTK("Tor counter selection is wrong\n");
i_ReturnValue = -4;
- } // if (b_TorCounter <= 1)
+ } /* if (b_TorCounter <= 1) */
} else {
/******************************************/
/* The module is not a tor counter module */
/*
+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_GetTorCounterInitialisation |
-| (BYTE_ b_BoardHandle, |
-| BYTE_ b_ModulNbr, |
-| BYTE_ b_TorCounter, |
-| PBYTE_ pb_TimingUnit, |
+| (unsigned char_ b_BoardHandle, |
+| unsigned char_ b_ModulNbr, |
+| unsigned char_ b_TorCounter, |
+| unsigned char *_ pb_TimingUnit, |
| PULONG_ pul_TimingInterval, |
-| PBYTE_ pb_InputMode, |
-| PBYTE_ pb_ExternGate, |
-| PBYTE_ pb_CycleMode, |
-| PBYTE_ pb_Enable, |
-| PBYTE_ pb_InterruptEnable)|
+| unsigned char *_ pb_InputMode, |
+| unsigned char *_ pb_ExternGate, |
+| unsigned char *_ pb_CycleMode, |
+| unsigned char *_ pb_Enable, |
+| unsigned char *_ pb_InterruptEnable)|
+----------------------------------------------------------------------------+
| Task : Enable the tor counter (b_TorCounter) from selected |
| module (b_ModulNbr). You must calling the |
| The b_CycleMode parameter determine if you will |
| measured a single or more cycle. |
+----------------------------------------------------------------------------+
-| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 |
-| BYTE_ b_ModulNbr : Selected module number (0 to 3) |
-| BYTE_ b_TorCounter : Tor counter selection (0 or 1)
+| Input Parameters : unsigned char_ b_BoardHandle : Handle of board APCI-1710 |
+| unsigned char_ b_ModulNbr : Selected module number (0 to 3) |
+| unsigned char_ b_TorCounter : Tor counter selection (0 or 1)
b_ModulNbr = CR_AREF(insn->chanspec);
b_TorCounter = CR_CHAN(insn->chanspec);
. |
+----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_TimingUnit : Base timing unit (0 to 4) |
+| Output Parameters : unsigned char *_ pb_TimingUnit : Base timing unit (0 to 4) |
| 0 : ns |
| 1 : µs |
| 2 : ms |
| 3 : s |
| 4 : mn |
| PULONG_ pul_TimingInterval : Base timing value. |
-| PBYTE_ pb_InputMode : Input signal level |
+| unsigned char *_ pb_InputMode : Input signal level |
| selection |
| 0 : Tor count each low level |
| 1 : Tor count each high level|
-| PBYTE_ pb_ExternGate : Extern gate action |
+| unsigned char *_ pb_ExternGate : Extern gate action |
| selection |
| 0 : Extern gate signal not |
| used |
| 1 : Extern gate signal used|
-| PBYTE_ pb_CycleMode : Tor counter acquisition |
+| unsigned char *_ pb_CycleMode : Tor counter acquisition |
| mode |
-| PBYTE_ pb_Enable : Indicate if the tor counter|
+| unsigned char *_ pb_Enable : Indicate if the tor counter|
| is enabled or no |
| 0 : Tor counter disabled |
| 1 : Tor counter enabled |
-| PBYTE_ pb_InterruptEnable : Enable or disable the |
+| unsigned char *_ pb_InterruptEnable : Enable or disable the |
| tor counter interrupt. |
| APCI1710_ENABLE: |
| Enable the tor counter |
| APCI1710_DISABLE: |
| Disable the tor counter |
| interrupt
- pb_TimingUnit = (PBYTE) &data[0];
- pul_TimingInterval = (PULONG) &data[1];
- pb_InputMode = (PBYTE) &data[2];
- pb_ExternGate = (PBYTE) &data[3];
- pb_CycleMode = (PBYTE) &data[4];
- pb_Enable = (PBYTE) &data[5];
- pb_InterruptEnable = (PBYTE) &data[6];
+ pb_TimingUnit = (unsigned char *) &data[0];
+ pul_TimingInterval = (unsigned int *) &data[1];
+ pb_InputMode = (unsigned char *) &data[2];
+ pb_ExternGate = (unsigned char *) &data[3];
+ pb_CycleMode = (unsigned char *) &data[4];
+ pb_Enable = (unsigned char *) &data[5];
+ pb_InterruptEnable = (unsigned char *) &data[6];
|
+----------------------------------------------------------------------------+
| Return Value : 0: No error |
+----------------------------------------------------------------------------+
*/
-INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
+int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
{
- INT i_ReturnValue = 0;
- DWORD dw_Status;
- BYTE b_ModulNbr;
- BYTE b_TorCounter;
- PBYTE pb_TimingUnit;
- PULONG pul_TimingInterval;
- PBYTE pb_InputMode;
- PBYTE pb_ExternGate;
- PBYTE pb_CycleMode;
- PBYTE pb_Enable;
- PBYTE pb_InterruptEnable;
+ int i_ReturnValue = 0;
+ unsigned int dw_Status;
+ unsigned char b_ModulNbr;
+ unsigned char b_TorCounter;
+ unsigned char * pb_TimingUnit;
+ unsigned int * pul_TimingInterval;
+ unsigned char * pb_InputMode;
+ unsigned char * pb_ExternGate;
+ unsigned char * pb_CycleMode;
+ unsigned char * pb_Enable;
+ unsigned char * pb_InterruptEnable;
i_ReturnValue = insn->n;
b_ModulNbr = CR_AREF(insn->chanspec);
b_TorCounter = CR_CHAN(insn->chanspec);
- pb_TimingUnit = (PBYTE) & data[0];
- pul_TimingInterval = (PULONG) & data[1];
- pb_InputMode = (PBYTE) & data[2];
- pb_ExternGate = (PBYTE) & data[3];
- pb_CycleMode = (PBYTE) & data[4];
- pb_Enable = (PBYTE) & data[5];
- pb_InterruptEnable = (PBYTE) & data[6];
+ pb_TimingUnit = (unsigned char *) & data[0];
+ pul_TimingInterval = (unsigned int *) & data[1];
+ pb_InputMode = (unsigned char *) & data[2];
+ pb_ExternGate = (unsigned char *) & data[3];
+ pb_CycleMode = (unsigned char *) & data[4];
+ pb_Enable = (unsigned char *) & data[5];
+ pb_InterruptEnable = (unsigned char *) & data[6];
/**************************/
/* Test the module number */
(64 * b_ModulNbr));
*pb_CycleMode =
- (BYTE) ((dw_Status >> 4) & 1);
+ (unsigned char) ((dw_Status >> 4) & 1);
*pb_InterruptEnable =
- (BYTE) ((dw_Status >> 5) & 1);
+ (unsigned char) ((dw_Status >> 5) & 1);
/******************************************************/
/* Test if extern gate used for clock or for signal B */
*pb_InputMode =
APCI1710_TOR_QUADRUPLE_MODE;
}
- } // if (dw_Status & 0x400)
+ } /* if (dw_Status & 0x400) */
else {
*pb_InputMode = 1;
- } // // if (dw_Status & 0x400)
+ } /* // if (dw_Status & 0x400) */
/************************/
/* Extern gate not used */
/************************/
*pb_ExternGate = 0;
- } // if (dw_Status & 0x600)
+ } /* if (dw_Status & 0x600) */
else {
*pb_InputMode =
- (BYTE) ((dw_Status >> 6)
+ (unsigned char) ((dw_Status >> 6)
& 1);
*pb_ExternGate =
- (BYTE) ((dw_Status >> 7)
+ (unsigned char) ((dw_Status >> 7)
& 1);
- } // if (dw_Status & 0x600)
+ } /* if (dw_Status & 0x600) */
*pb_TimingUnit =
devpriv->
i_ReturnValue = -5;
}
- } // if (b_TorCounter <= 1)
+ } /* if (b_TorCounter <= 1) */
else {
/**********************************/
/* Tor counter selection is wrong */
DPRINTK("Tor counter selection is wrong \n");
i_ReturnValue = -4;
- } // if (b_TorCounter <= 1)
+ } /* if (b_TorCounter <= 1) */
} else {
/******************************************/
/* The module is not a tor counter module */
/*
+----------------------------------------------------------------------------+
| Function Name : _INT_ i_APCI1710_ReadTorCounterValue |
-| (BYTE_ b_BoardHandle, |
-| BYTE_ b_ModulNbr, |
-| BYTE_ b_TorCounter, |
-| UINT_ ui_TimeOut, |
-| PBYTE_ pb_TorCounterStatus, |
+| (unsigned char_ b_BoardHandle, |
+| unsigned char_ b_ModulNbr, |
+| unsigned char_ b_TorCounter, |
+| unsigned int_ ui_TimeOut, |
+| unsigned char *_ pb_TorCounterStatus, |
| PULONG_ pul_TorCounterValue) |
+----------------------------------------------------------------------------+
| Task case APCI1710_TOR_GETPROGRESSSTATUS: Return the tor counter
| (pul_TorCounterValue) after a conting cycle stop |
| from selected tor counter module (b_ModulNbr). |
+----------------------------------------------------------------------------+
-| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 |
-| BYTE_ b_ModulNbr : Selected module number (0 to 3) |
-| BYTE_ b_TorCounter : Tor counter selection (0 or 1).
+| Input Parameters : unsigned char_ b_BoardHandle : Handle of board APCI-1710 |
+| unsigned char_ b_ModulNbr : Selected module number (0 to 3) |
+| unsigned char_ b_TorCounter : Tor counter selection (0 or 1).
b_ModulNbr = CR_AREF(insn->chanspec);
- b_ReadType = (BYTE) data[0];
- b_TorCounter = (BYTE) data[1];
- ui_TimeOut = (UINT) data[2]; |
+ b_ReadType = (unsigned char) data[0];
+ b_TorCounter = (unsigned char) data[1];
+ ui_TimeOut = (unsigned int) data[2]; |
+----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_TorCounterStatus : Return the tor counter |
+| Output Parameters : unsigned char *_ pb_TorCounterStatus : Return the tor counter |
| status. |
| 0 : Conting cycle not started|
| Software gate not set. |
| function |
| "i_APCI1710_InitTorCounter"|
| 4 : Timeeout occur |
-| PULONG pul_TorCounterValue : Tor counter value.
- pb_TorCounterStatus=(PBYTE) &data[0];
- pul_TorCounterValue=(PULONG) &data[1]; |
+| unsigned int * pul_TorCounterValue : Tor counter value.
+ pb_TorCounterStatus=(unsigned char *) &data[0];
+ pul_TorCounterValue=(unsigned int *) &data[1]; |
+----------------------------------------------------------------------------+
| Return Value : 0: No error |
| -1: The handle parameter of the board is wrong |
+----------------------------------------------------------------------------+
*/
-INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device * dev,
+int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device * dev,
struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
{
- INT i_ReturnValue = 0;
- DWORD dw_Status;
- DWORD dw_TimeOut = 0;
+ int i_ReturnValue = 0;
+ unsigned int dw_Status;
+ unsigned int dw_TimeOut = 0;
- BYTE b_ModulNbr;
- BYTE b_TorCounter;
- BYTE b_ReadType;
- UINT ui_TimeOut;
- PBYTE pb_TorCounterStatus;
- PULONG pul_TorCounterValue;
+ unsigned char b_ModulNbr;
+ unsigned char b_TorCounter;
+ unsigned char b_ReadType;
+ unsigned int ui_TimeOut;
+ unsigned char * pb_TorCounterStatus;
+ unsigned int * pul_TorCounterValue;
i_ReturnValue = insn->n;
b_ModulNbr = CR_AREF(insn->chanspec);
- b_ReadType = (BYTE) data[0];
- b_TorCounter = (BYTE) data[1];
- ui_TimeOut = (UINT) data[2];
- pb_TorCounterStatus = (PBYTE) & data[0];
- pul_TorCounterValue = (PULONG) & data[1];
+ b_ReadType = (unsigned char) data[0];
+ b_TorCounter = (unsigned char) data[1];
+ ui_TimeOut = (unsigned int) data[2];
+ pb_TorCounterStatus = (unsigned char *) & data[0];
+ pul_TorCounterValue = (unsigned int *) & data[1];
/**************************/
/* Test the module number */
+
(16 * b_TorCounter) + (64 * b_ModulNbr));
break;
- } // if ((dw_Status & 4) == 4)
+ } /* if ((dw_Status & 4) == 4) */
else {
/*******************************/
/* Test if measurement stopped */
(16 * b_TorCounter) + (64 * b_ModulNbr));
break;
- } // if ((dw_Status & 2) == 2)
+ } /* if ((dw_Status & 2) == 2) */
else {
/*******************************/
/* Test if measurement started */
*pb_TorCounterStatus
=
1;
- } // if ((dw_Status & 1) == 1)
+ } /* if ((dw_Status & 1) == 1) */
else {
/***************************/
/* Measurement not started */
*pb_TorCounterStatus
=
0;
- } // if ((dw_Status & 1) == 1)
- } // if ((dw_Status & 2) == 2)
- } // if ((dw_Status & 8) == 8)
+ } /* if ((dw_Status & 1) == 1) */
+ } /* if ((dw_Status & 2) == 2) */
+ } /* if ((dw_Status & 8) == 8) */
if (dw_TimeOut == ui_TimeOut) {
/*****************/
mdelay(1000);
}
- } // for (;;)
+ } /* for (;;) */
/*************************/
/* Test if timeout occur */
default:
printk("Inputs wrong\n");
- } // switch end
- } // if (dw_Status & 0x1)
+ } /* switch end */
+ } /* if (dw_Status & 0x1) */
else {
/***************************/
/* Tor counter not enabled */
DPRINTK("Tor counter not enabled\n");
i_ReturnValue = -6;
- } // if (dw_Status & 0x1)
+ } /* if (dw_Status & 0x1) */
} else {
/*******************************/
/* Tor counter not initialised */
DPRINTK("Tor counter not initialised\n");
i_ReturnValue = -5;
}
- } // if (b_TorCounter <= 1)
+ } /* if (b_TorCounter <= 1) */
else {
/**********************************/
/* Tor counter selection is wrong */
DPRINTK("Tor counter selection is wrong\n");
i_ReturnValue = -4;
- } // if (b_TorCounter <= 1)
+ } /* if (b_TorCounter <= 1) */
} else {
/******************************************/
/* The module is not a tor counter module */
git.openpandora.org / pandora-kernel.git / blobdiff