/*
- * linux/drivers/char/at91_serial.c
+ * linux/drivers/char/atmel_serial.c
*
* Driver for Atmel AT91 / AT32 Serial ports
* Copyright (C) 2003 Rick Bronson
#include <asm/io.h>
-#include <asm/arch/at91rm9200_pdc.h>
#include <asm/mach/serial_at91.h>
#include <asm/arch/board.h>
+#include <asm/arch/at91_pdc.h>
#ifdef CONFIG_ARM
-#include <asm/arch/system.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#endif
unsigned int control = 0;
unsigned int mode;
-#ifdef CONFIG_ARM
- if (arch_identify() == ARCH_ID_AT91RM9200) {
+#ifdef CONFIG_ARCH_AT91RM9200
+ if (cpu_is_at91rm9200()) {
/*
* AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
* We need to drive the pin manually.
/*
* Change the port parameters
*/
-static void atmel_set_termios(struct uart_port *port, struct termios * termios, struct termios * old)
+static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
{
unsigned long flags;
unsigned int mode, imr, quot, baud;
struct atmel_uart_data *data = pdev->dev.platform_data;
port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
+ port->flags = UPF_BOOT_AUTOCONF;
port->ops = &atmel_pops;
- port->fifosize = 1;
+ port->fifosize = 1;
port->line = pdev->id;
port->dev = &pdev->dev;
if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
enable_irq_wake(port->irq);
else {
- disable_irq_wake(port->irq);
uart_suspend_port(&atmel_uart, port);
atmel_port->suspended = 1;
}
uart_resume_port(&atmel_uart, port);
atmel_port->suspended = 0;
}
+ else
+ disable_irq_wake(port->irq);
return 0;
}