Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial

[pandora-kernel.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5ea778f..653098b 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -121,7 +121,7 @@ config SERIAL_8250_RUNTIME_UARTS
        default "4"
        help
          Set this to the maximum number of serial ports you want
-         the kernel to register at boot time.  This can be overriden
+         the kernel to register at boot time.  This can be overridden
          with the module parameter "nr_uarts", or boot-time parameter
          8250.nr_uarts
 
@@ -205,7 +205,7 @@ config SERIAL_8250_BOCA
        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
        help
          Say Y here if you have a Boca serial board.  Please read the Boca
-         mini-HOWTO, avaialble from <http://www.tldp.org/docs.html#howto>
+         mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
 
          To compile this driver as a module, choose M here: the module
          will be called 8250_boca.
@@ -295,7 +295,7 @@ config SERIAL_AMBA_PL011_CONSOLE
          Even if you say Y here, the currently visible framebuffer console
          (/dev/tty0) will still be used as the system console by default, but
          you can alter that using a kernel command line option such as
-         "console=ttyAM0". (Try "man bootparam" or see the documentation of
+         "console=ttyAMA0". (Try "man bootparam" or see the documentation of
          your boot loader (lilo or loadlin) about how to pass options to the
          kernel at boot time.)
 
@@ -354,21 +354,24 @@ config SERIAL_CLPS711X_CONSOLE
          kernel at boot time.)
 
 config SERIAL_S3C2410
-       tristate "Samsung S3C2410 Serial port support"
+       tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
        depends on ARM && ARCH_S3C2410
        select SERIAL_CORE
        help
-         Support for the on-chip UARTs on the Samsung S3C2410X CPU,
+         Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
          providing /dev/ttySAC0, 1 and 2 (note, some machines may not
          provide all of these ports, depending on how the serial port
          pins are configured.
 
+         Currently this driver supports the UARTS on the S3C2410, S3C2440,
+         S3C2442, S3C2412 and S3C2413 CPUs.
+
 config SERIAL_S3C2410_CONSOLE
        bool "Support for console on S3C2410 serial port"
        depends on SERIAL_S3C2410=y
        select SERIAL_CORE_CONSOLE
        help
-         Allow selection of the S3C2410 on-board serial ports for use as
+         Allow selection of the S3C24XX on-board serial ports for use as
          an virtual console.
 
          Even if you say Y here, the currently visible virtual console
@@ -639,12 +642,17 @@ config V850E_UART_CONSOLE
        select SERIAL_CORE_CONSOLE
 
 config SERIAL_SH_SCI
-       tristate "SH SCI(F) serial port support"
+       tristate "SuperH SCI(F) serial port support"
        depends on SUPERH || H8300
        select SERIAL_CORE
 
+config SERIAL_SH_SCI_NR_UARTS
+       int "Maximum number of SCI(F) serial ports"
+       depends on SERIAL_SH_SCI
+       default "2"
+
 config SERIAL_SH_SCI_CONSOLE
-       bool "Support for console on SH SCI(F)"
+       bool "Support for console on SuperH SCI(F)"
        depends on SERIAL_SH_SCI=y
        select SERIAL_CORE_CONSOLE
 
@@ -659,7 +667,7 @@ config SERIAL_68328
        depends on M68328 || M68EZ328 || M68VZ328
        help
          This driver supports the built-in serial port of the Motorola 68328
-         (standard, EZ and VZ varities).
+         (standard, EZ and VZ varieties).
 
 config SERIAL_68328_RTS_CTS
        bool "Support RTS/CTS on 68328 serial port"
@@ -937,4 +945,23 @@ config SERIAL_SGI_IOC3
          If you have an SGI Altix with an IOC3 serial card,
          say Y or M.  Otherwise, say N.
 
+config SERIAL_NETX
+       bool "NetX serial port support"
+       depends on ARM && ARCH_NETX
+       select SERIAL_CORE
+       help
+         If you have a machine based on a Hilscher NetX SoC you
+         can enable its onboard serial port by enabling this option.
+
+          To compile this driver as a module, choose M here: the
+          module will be called netx-serial.
+
+config SERIAL_NETX_CONSOLE
+       bool "Console on NetX serial port"
+       depends on SERIAL_NETX
+       select SERIAL_CORE_CONSOLE
+       help
+         If you have enabled the serial port on the Motorola IMX
+         CPU you can make it the console by answering Y to this option.
+
 endmenu