*
* Based on preview driver from Silicon Image.
*
- * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
- * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
- * those work. Enabling those shouldn't be difficult. Basic
- * structure is all there (in libata-dev tree). If you have any
- * information about this hardware, please contact me or linux-ide.
- * Info is needed on...
- *
- * - How to issue tagged commands and turn on sactive on issue accordingly.
- * - Where to put an ATAPI command and how to tell the device to send it.
- * - How to enable/use 64bit.
- *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
-#include "scsi.h"
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
#define DRV_NAME "sata_sil24"
-#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */
+#define DRV_VERSION "0.23"
/*
* Port request block (PRB) 32 bytes
PORT_CS_DEV_RST = (1 << 1), /* device reset */
PORT_CS_INIT = (1 << 2), /* port initialize */
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
+ PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
PORT_CS_RESUME = (1 << 6), /* port resume */
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
+ /* bits of PRB control field */
+ PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
+ PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
+ PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
+ PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
+ PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
+
+ /* PRB protocol field */
+ PRB_PROT_PACKET = (1 << 0),
+ PRB_PROT_TCQ = (1 << 1),
+ PRB_PROT_NCQ = (1 << 2),
+ PRB_PROT_READ = (1 << 3),
+ PRB_PROT_WRITE = (1 << 4),
+ PRB_PROT_TRANSPARENT = (1 << 5),
+
/*
* Other constants
*/
SGE_TRM = (1 << 31), /* Last SGE in chain */
- PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */
+ SGE_LNK = (1 << 30), /* linked list
+ Points to SGT, not SGE */
+ SGE_DRD = (1 << 29), /* discard data read (/dev/null)
+ data address ignored */
/* board id */
BID_SIL3124 = 0,
IRQ_STAT_4PORTS = 0xf,
};
-struct sil24_cmd_block {
+struct sil24_ata_block {
struct sil24_prb prb;
struct sil24_sge sge[LIBATA_MAX_PRD];
};
+struct sil24_atapi_block {
+ struct sil24_prb prb;
+ u8 cdb[16];
+ struct sil24_sge sge[LIBATA_MAX_PRD - 1];
+};
+
+union sil24_cmd_block {
+ struct sil24_ata_block ata;
+ struct sil24_atapi_block atapi;
+};
+
/*
* ap->private_data
*
* here from the previous interrupt.
*/
struct sil24_port_priv {
- struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
+ union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
struct ata_taskfile tf; /* Cached taskfile registers */
};
void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
static u8 sil24_check_status(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_host_stop(struct ata_host_set *host_set);
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static struct pci_device_id sil24_pci_tbl[] = {
+static const struct pci_device_id sil24_pci_tbl[] = {
{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
{ 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
{ 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
.remove = ata_pci_remove_one, /* safe? */
};
-static Scsi_Host_Template sil24_sht = {
+static struct scsi_host_template sil24_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
static const struct ata_port_operations sil24_ops = {
.port_disable = ata_port_disable,
+ .dev_config = sil24_dev_config,
+
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
.dev_select = ata_noop_dev_select,
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
},
};
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+
+ if (ap->cdb_len == 16)
+ writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
+ else
+ writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
+}
+
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
*tf = pp->tf;
}
-static void sil24_phy_reset(struct ata_port *ap)
+static int sil24_issue_SRST(struct ata_port *ap)
{
- __sata_phy_reset(ap);
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ struct sil24_port_priv *pp = ap->private_data;
+ struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
+ dma_addr_t paddr = pp->cmd_block_dma;
+ u32 irq_enable, irq_stat;
+ int cnt;
+
+ /* temporarily turn off IRQs during SRST */
+ irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
+ writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
+
/*
- * No ATAPI yet. Just unconditionally indicate ATA device.
- * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
- * and libata core will ignore the device.
+ * XXX: Not sure whether the following sleep is needed or not.
+ * The original driver had it. So....
*/
- if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
- ap->device[0].class = ATA_DEV_ATA;
+ msleep(10);
+
+ prb->ctrl = PRB_CTRL_SRST;
+ prb->fis[1] = 0; /* no PM yet */
+
+ writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+
+ for (cnt = 0; cnt < 100; cnt++) {
+ irq_stat = readl(port + PORT_IRQ_STAT);
+ writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
+
+ irq_stat >>= PORT_IRQ_RAW_SHIFT;
+ if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
+ break;
+
+ msleep(1);
+ }
+
+ /* restore IRQs */
+ writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
+
+ if (!(irq_stat & PORT_IRQ_COMPLETE))
+ return -1;
+
+ /* update TF */
+ sil24_update_tf(ap);
+ return 0;
+}
+
+static void sil24_phy_reset(struct ata_port *ap)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+
+ __sata_phy_reset(ap);
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ if (sil24_issue_SRST(ap) < 0) {
+ printk(KERN_ERR DRV_NAME
+ " ata%u: SRST failed, disabling port\n", ap->id);
+ ap->ops->port_disable(ap);
+ return;
+ }
+
+ ap->device->class = ata_dev_classify(&pp->tf);
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
- struct sil24_cmd_block *cb)
+ struct sil24_sge *sge)
{
- struct scatterlist *sg = qc->sg;
- struct sil24_sge *sge = cb->sge;
- unsigned i;
+ struct scatterlist *sg;
+ unsigned int idx = 0;
- for (i = 0; i < qc->n_elem; i++, sg++, sge++) {
+ ata_for_each_sg(sg, qc) {
sge->addr = cpu_to_le64(sg_dma_address(sg));
sge->cnt = cpu_to_le32(sg_dma_len(sg));
- sge->flags = 0;
- sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM);
+ if (ata_sg_is_last(sg, qc))
+ sge->flags = cpu_to_le32(SGE_TRM);
+ else
+ sge->flags = 0;
+
+ sge++;
+ idx++;
}
}
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
- struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
- struct sil24_prb *prb = &cb->prb;
+ union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+ struct sil24_prb *prb;
+ struct sil24_sge *sge;
switch (qc->tf.protocol) {
case ATA_PROT_PIO:
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
+ prb = &cb->ata.prb;
+ sge = cb->ata.sge;
+ prb->ctrl = 0;
break;
+
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_DMA:
+ case ATA_PROT_ATAPI_NODATA:
+ prb = &cb->atapi.prb;
+ sge = cb->atapi.sge;
+ memset(cb->atapi.cdb, 0, 32);
+ memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
+
+ if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ prb->ctrl = PRB_CTRL_PACKET_WRITE;
+ else
+ prb->ctrl = PRB_CTRL_PACKET_READ;
+ } else
+ prb->ctrl = 0;
+
+ break;
+
default:
- /* ATAPI isn't supported yet */
+ prb = NULL; /* shut up, gcc */
+ sge = NULL;
BUG();
}
ata_tf_to_fis(&qc->tf, prb->fis, 0);
if (qc->flags & ATA_QCFLAG_DMAMAP)
- sil24_fill_sg(qc, cb);
+ sil24_fill_sg(qc, sge);
}
static int sil24_qc_issue(struct ata_queued_cmd *qc)
/* unused */
}
+static int __sil24_restart_controller(void __iomem *port)
+{
+ u32 tmp;
+ int cnt;
+
+ writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+
+ /* Max ~10ms */
+ for (cnt = 0; cnt < 10000; cnt++) {
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_RDY)
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+static void sil24_restart_controller(struct ata_port *ap)
+{
+ if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
+ printk(KERN_ERR DRV_NAME
+ " ata%u: failed to restart controller\n", ap->id);
+}
+
static int __sil24_reset_controller(void __iomem *port)
{
int cnt;
if (tmp & PORT_CS_DEV_RST)
return -1;
- return 0;
+
+ if (tmp & PORT_CS_RDY)
+ return 0;
+
+ return __sil24_restart_controller(port);
}
static void sil24_reset_controller(struct ata_port *ap)
*/
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
qc->scsidone = scsi_finish_command;
- ata_qc_complete(qc, AC_ERR_OTHER);
+ qc->err_mask |= AC_ERR_OTHER;
+ ata_qc_complete(qc);
sil24_reset_controller(ap);
}
if (serror)
writel(serror, port + PORT_SERROR);
- printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
- " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
- ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+ /*
+ * Don't log ATAPI device errors. They're supposed to happen
+ * and any serious errors will be logged using sense data by
+ * the SCSI layer.
+ */
+ if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
+ printk("ata%u: error interrupt on port%d\n"
+ " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+ ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
/*
*/
sil24_update_tf(ap);
err_mask = ac_err_mask(pp->tf.command);
+ sil24_restart_controller(ap);
} else {
/*
* Other errors. libata currently doesn't have any
* ATA_ERR.
*/
err_mask = AC_ERR_OTHER;
+ sil24_reset_controller(ap);
}
- if (qc)
- ata_qc_complete(qc, err_mask);
-
- sil24_reset_controller(ap);
+ if (qc) {
+ qc->err_mask |= err_mask;
+ ata_qc_complete(qc);
+ }
}
static inline void sil24_host_intr(struct ata_port *ap)
*/
sil24_update_tf(ap);
- if (qc)
- ata_qc_complete(qc, ac_err_mask(pp->tf.command));
+ if (qc) {
+ qc->err_mask |= ac_err_mask(pp->tf.command);
+ ata_qc_complete(qc);
+ }
} else
sil24_error_intr(ap, slot_stat);
}
return IRQ_RETVAL(handled);
}
+static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev)
+{
+ const size_t cb_size = sizeof(*pp->cmd_block);
+
+ dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
+}
+
static int sil24_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
struct sil24_port_priv *pp;
- struct sil24_cmd_block *cb;
+ union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb);
dma_addr_t cb_dma;
+ int rc = -ENOMEM;
- pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
- return -ENOMEM;
- memset(pp, 0, sizeof(*pp));
+ goto err_out;
pp->tf.command = ATA_DRDY;
cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
- if (!cb) {
- kfree(pp);
- return -ENOMEM;
- }
+ if (!cb)
+ goto err_out_pp;
memset(cb, 0, cb_size);
+ rc = ata_pad_alloc(ap, dev);
+ if (rc)
+ goto err_out_pad;
+
pp->cmd_block = cb;
pp->cmd_block_dma = cb_dma;
ap->private_data = pp;
return 0;
+
+err_out_pad:
+ sil24_cblk_free(pp, dev);
+err_out_pp:
+ kfree(pp);
+err_out:
+ return rc;
}
static void sil24_port_stop(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
struct sil24_port_priv *pp = ap->private_data;
- size_t cb_size = sizeof(*pp->cmd_block);
- dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
+ sil24_cblk_free(pp, dev);
+ ata_pad_free(ap, dev);
kfree(pp);
}
git.openpandora.org / pandora-kernel.git / blobdiff