#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.02"
+#define DRV_VERSION "1.03"
enum {
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
-static Scsi_Host_Template pdc_ata_sht = {
+static struct scsi_host_template pdc_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.host_stop = ata_pci_host_stop,
};
-static struct ata_port_info pdc_port_info[] = {
+static const struct ata_port_info pdc_port_info[] = {
/* board_2037x */
{
.sht = &pdc_ata_sht,
},
};
-static struct pci_device_id pdc_ata_pci_tbl[] = {
+static const struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
drv_stat = ata_wait_idle(ap);
- ata_qc_complete(qc, __ac_err_mask(drv_stat));
+ qc->err_mask |= __ac_err_mask(drv_stat);
+ ata_qc_complete(qc);
break;
default:
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
ap->id, qc->tf.command, drv_stat);
- ata_qc_complete(qc, ac_err_mask(drv_stat));
+ qc->err_mask |= ac_err_mask(drv_stat);
+ ata_qc_complete(qc);
break;
}
static inline unsigned int pdc_host_intr( struct ata_port *ap,
struct ata_queued_cmd *qc)
{
- unsigned int handled = 0, err_mask = 0;
+ unsigned int handled = 0;
u32 tmp;
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
tmp = readl(mmio);
if (tmp & PDC_ERR_MASK) {
- err_mask = AC_ERR_DEV;
+ qc->err_mask |= AC_ERR_DEV;
pdc_reset_port(ap);
}
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
- err_mask |= ac_err_mask(ata_wait_idle(ap));
- ata_qc_complete(qc, err_mask);
+ qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
+ ata_qc_complete(qc);
handled = 1;
break;
probe_ent->port[3].scr_addr = base + 0x700;
break;
case board_2037x:
- probe_ent->n_ports = 2;
+ probe_ent->n_ports = 2;
break;
case board_20619:
probe_ent->n_ports = 4;
probe_ent->port[2].scr_addr = base + 0x600;
probe_ent->port[3].scr_addr = base + 0x700;
- break;
+ break;
default:
BUG();
break;